The value of a statistical life(VSL)is a crucial tool for monetizing health impacts.To explore the VSL in China,this study examines people’s willingness to pay(WTP)to reduce death risk from air pollution in six repre...The value of a statistical life(VSL)is a crucial tool for monetizing health impacts.To explore the VSL in China,this study examines people’s willingness to pay(WTP)to reduce death risk from air pollution in six representative cities in China based on face-to-face contingent valuation interviews(n=3936)from March 7,2019 to September 30,2019.The results reveal that the WTP varied from CNY 455 to 763 in 2019(USD 66-111),corresponding to a VSL range of CNY 3.79-6.36 million(USD 549395-921940).The VSL in China in 2019 is estimated to be CNY 4.76 million(USD 689659).The statistics indicate that monthly expenditure levels,environmental concerns,risk attitudes,and assumed market acceptance,which have seldom been dis‐cussed in previous studies,significantly impact WTP and VSL.These findings will serve as a reference for ana‐lyzing mortality risk reduction benefits in future research and for policymaking.展开更多
In this study, fatigue tests under different R ratios were conducted on the AZ61 Mg alloy to investigate its fatigue lifetimes and fatigue crack growth (FCG) behavior. The fracture surface of the failed specimens was ...In this study, fatigue tests under different R ratios were conducted on the AZ61 Mg alloy to investigate its fatigue lifetimes and fatigue crack growth (FCG) behavior. The fracture surface of the failed specimens was investigated using a scanning electron microscope to study the size of the intermetallic compounds from which the pioneer fatigue crack initiated and led to the final failure of the specimen. To determine the maximum size of the intermetallic compounds existing within the cross section of the specimen at higher risk, Gumbel’s extreme-value statistics were utilized. In the present study, the intermetallic compounds contained within the specimen were assumed to be the initial cracks existing in the material before the fatigue tests. A modified linear elastic fracture-mechanics parameter, M, proposed by McEvily et al., was used to analyze the short FCG behavior under different stress ratios, R. The relation between the rate of FCG and M parameter was found to be useful and appropriate for predicting the fatigue lifetimes under different R ratios. Moreover, the probabilistic stress-fatigue life (P-S-N) curve of the material under different R ratios could be predicted with this method, which utilizes both the FCG law and a statistical distribution of sizes of the most dangerous intermetallic compounds. The evaluated results were in good agreement with the experimental ones. This correspondence indicates that the estimation method proposed in the present study is effective for evaluation of the probabilistic stress-fatigue life (P-S-N) curve of the material under different R ratios.展开更多
基金supported by the National Natural Science Foun‐dation of China[Grant No.71773061].
文摘The value of a statistical life(VSL)is a crucial tool for monetizing health impacts.To explore the VSL in China,this study examines people’s willingness to pay(WTP)to reduce death risk from air pollution in six representative cities in China based on face-to-face contingent valuation interviews(n=3936)from March 7,2019 to September 30,2019.The results reveal that the WTP varied from CNY 455 to 763 in 2019(USD 66-111),corresponding to a VSL range of CNY 3.79-6.36 million(USD 549395-921940).The VSL in China in 2019 is estimated to be CNY 4.76 million(USD 689659).The statistics indicate that monthly expenditure levels,environmental concerns,risk attitudes,and assumed market acceptance,which have seldom been dis‐cussed in previous studies,significantly impact WTP and VSL.These findings will serve as a reference for ana‐lyzing mortality risk reduction benefits in future research and for policymaking.
文摘In this study, fatigue tests under different R ratios were conducted on the AZ61 Mg alloy to investigate its fatigue lifetimes and fatigue crack growth (FCG) behavior. The fracture surface of the failed specimens was investigated using a scanning electron microscope to study the size of the intermetallic compounds from which the pioneer fatigue crack initiated and led to the final failure of the specimen. To determine the maximum size of the intermetallic compounds existing within the cross section of the specimen at higher risk, Gumbel’s extreme-value statistics were utilized. In the present study, the intermetallic compounds contained within the specimen were assumed to be the initial cracks existing in the material before the fatigue tests. A modified linear elastic fracture-mechanics parameter, M, proposed by McEvily et al., was used to analyze the short FCG behavior under different stress ratios, R. The relation between the rate of FCG and M parameter was found to be useful and appropriate for predicting the fatigue lifetimes under different R ratios. Moreover, the probabilistic stress-fatigue life (P-S-N) curve of the material under different R ratios could be predicted with this method, which utilizes both the FCG law and a statistical distribution of sizes of the most dangerous intermetallic compounds. The evaluated results were in good agreement with the experimental ones. This correspondence indicates that the estimation method proposed in the present study is effective for evaluation of the probabilistic stress-fatigue life (P-S-N) curve of the material under different R ratios.
