The novel SiC foam valve tray was made of thin slices of SiC foam material with a high specific surfacearea. Hydrodynamic performances of the novel SiC foam valve tray were studied with air-water system at atmos-pheri...The novel SiC foam valve tray was made of thin slices of SiC foam material with a high specific surfacearea. Hydrodynamic performances of the novel SiC foam valve tray were studied with air-water system at atmos-pheric pressure. These performance parameters included pressure drop, entrainment, weeping and clear liquidheight. The mass transfer efficiency of the SiC foam valve tray was measured in laboratory plate column. Comparedwith the F1 float valve tray, the dry pressure drop was decreased about 25%, the entrainment rate was about 70%lower at high gas load, the weeping was much better, and the mass transfer efficiency was far higher. Thus, theoverall performance of the novel SiC foam valve tray was better than that of F1 float valve tray.展开更多
Computational fluid dynamics(CFD) has recently emerged as an effective tool for the investigation of the hydraulic parameters and efficiency of tray towers.The computation domain was established for two types of orien...Computational fluid dynamics(CFD) has recently emerged as an effective tool for the investigation of the hydraulic parameters and efficiency of tray towers.The computation domain was established for two types of oriented valves within a tray and meshed into two parts with different grid types and sizes.The volume fraction correlation concerning inter-phase momentum transfer source was fitted based on experimental data,and built in UDF for simulation.The flow pattern of oriented valve tray under different operating conditions was simulated under Eulerian-Eulerian framework with realizable k-ε model.The predicted liquid height from CFD simulation was in good agreement with the results of pressure drop and volume fraction correlations.Meanwhile,the velocity distribution and volume fraction of the two phases were demonstrated and analyzed,which are useful in design and analysis of the column trays.展开更多
基金Supported by the National Basic Research Program of China （2009CB219905） National Natural Science Foundation of China（21176172）+1 种基金 National Key Technology R＆D Program （2011BAE03B07） Program for Changjiang Scholars and Innovative Research Team in University （IRT0936） The authors are also grateful to Institute of Metal, Chinese Academy of Science for providing SiC foam elements, and their support and discussions.
文摘The novel SiC foam valve tray was made of thin slices of SiC foam material with a high specific surfacearea. Hydrodynamic performances of the novel SiC foam valve tray were studied with air-water system at atmos-pheric pressure. These performance parameters included pressure drop, entrainment, weeping and clear liquidheight. The mass transfer efficiency of the SiC foam valve tray was measured in laboratory plate column. Comparedwith the F1 float valve tray, the dry pressure drop was decreased about 25%, the entrainment rate was about 70%lower at high gas load, the weeping was much better, and the mass transfer efficiency was far higher. Thus, theoverall performance of the novel SiC foam valve tray was better than that of F1 float valve tray.
文摘Computational fluid dynamics(CFD) has recently emerged as an effective tool for the investigation of the hydraulic parameters and efficiency of tray towers.The computation domain was established for two types of oriented valves within a tray and meshed into two parts with different grid types and sizes.The volume fraction correlation concerning inter-phase momentum transfer source was fitted based on experimental data,and built in UDF for simulation.The flow pattern of oriented valve tray under different operating conditions was simulated under Eulerian-Eulerian framework with realizable k-ε model.The predicted liquid height from CFD simulation was in good agreement with the results of pressure drop and volume fraction correlations.Meanwhile,the velocity distribution and volume fraction of the two phases were demonstrated and analyzed,which are useful in design and analysis of the column trays.
