The low cost of the injected solvent,which can be also recovered and recycled,and the applicability of VAPEX technique in thin reservoirs are among the main advantages of VAPEX process compared to thermal heavy oil re...The low cost of the injected solvent,which can be also recovered and recycled,and the applicability of VAPEX technique in thin reservoirs are among the main advantages of VAPEX process compared to thermal heavy oil recovery techniques.In this research,an extensive experimental investigation is carried out to first evaluate the technical feasibility of utilization of various solvents for VAPEX process.Then the effect of drainage height on the stabilized drainage rate in VAPEX process was studied by conducting series of experiments in two large-scale 2D VAPEX models of 24.5 cm and 47.5 cm heights.Both models were packed with low permeability Ottawa sand(#530)and saturated with a heavy oil sample from Saskatchewan heavy oil reservoirs with viscosity of 5650 mPa s.Propane,butane,methane,carbon dioxide,propane/carbon dioxide(70%/30%)and propane/methane(70%/30%)were considered as respective solvents for the experiments,and a total of twelve VAPEX tests were carried out.Moreover,separate experiments were carried out at the end of each VAPEX experiment to measure the asphaltene precipitation at various locations of the VAPEX models.It was found that injecting propane would result in the highest drainage rate and oil recovery factor.Further analysis of results showed stabilized drainage rate significantly increased in the larger physical model.展开更多
文摘The low cost of the injected solvent,which can be also recovered and recycled,and the applicability of VAPEX technique in thin reservoirs are among the main advantages of VAPEX process compared to thermal heavy oil recovery techniques.In this research,an extensive experimental investigation is carried out to first evaluate the technical feasibility of utilization of various solvents for VAPEX process.Then the effect of drainage height on the stabilized drainage rate in VAPEX process was studied by conducting series of experiments in two large-scale 2D VAPEX models of 24.5 cm and 47.5 cm heights.Both models were packed with low permeability Ottawa sand(#530)and saturated with a heavy oil sample from Saskatchewan heavy oil reservoirs with viscosity of 5650 mPa s.Propane,butane,methane,carbon dioxide,propane/carbon dioxide(70%/30%)and propane/methane(70%/30%)were considered as respective solvents for the experiments,and a total of twelve VAPEX tests were carried out.Moreover,separate experiments were carried out at the end of each VAPEX experiment to measure the asphaltene precipitation at various locations of the VAPEX models.It was found that injecting propane would result in the highest drainage rate and oil recovery factor.Further analysis of results showed stabilized drainage rate significantly increased in the larger physical model.
