Gap acceptance theory is broadly used for evaluating unsignalized intersections in developed coun tries. Intersections with no specific priority to any move ment, known as uncontrolled intersections, are common in Ind...Gap acceptance theory is broadly used for evaluating unsignalized intersections in developed coun tries. Intersections with no specific priority to any move ment, known as uncontrolled intersections, are common in India. Limited priority is observed at a few intersections, where priorities are perceived by drivers based on geom etry, traffic volume, and speed on the approaches of intersection. Analyzing such intersections is complex because the overall traffic behavior is the result of drivers, vehicles, and traffic flow characteristics. Fuzzy theory has been widely used to analyze similar situations. This paper describes the application of adaptive neurofuzzy interface system （ANFIS） to the modeling of gap acceptance behavior of rightturning vehicles at limited priority Tintersections （in India, vehicles are driven on the left side of a road）. Field data are collected using video cameras at four Tintersections having limited priority. The data extracted include gap/lag, subject vehicle type, conflicting vehicle type, and driver＇s decision （accepted/rejected）. ANFIS models are developed by using 80 % of the extracted data （total data observations for major road right turning vehicles are 722 and 1,066 for minor road right turning vehicles） and remaining are used for model vali dation. Four different combinations of input variables are considered for major and minor road right turnings sepa rately. Correct prediction by ANFIS models ranges from 75.17 % to 82.16 % for major road right turning and 87.20 % to 88.62 % for minor road right turning. Themodels developed in this paper can be used in the dynamic estimation of gap acceptance in traffic simulation models.展开更多
提出了一种新型液压机械复合调速传动链,该传动链包含了一套完整的行星机构,用来实现输出端功率的合流.有别于传统的机械液压无级变速系统,该传动链中与行星机构匹配的两个输入端,通过变频器与变量泵,都能实现转速的独立变化,从而可以...提出了一种新型液压机械复合调速传动链,该传动链包含了一套完整的行星机构,用来实现输出端功率的合流.有别于传统的机械液压无级变速系统,该传动链中与行星机构匹配的两个输入端,通过变频器与变量泵,都能实现转速的独立变化,从而可以获得更大调速范围的传动链外特性曲线.使用了Matlab/Simulik等仿真工具进行了理论分析,并且通过PAC System RX3i控制器与iFIX人机交互界面进行了试验分析.结果表明:采用双变量复合控制,可显著提升传动链性能研究范围,优化动力匹配.展开更多
Contour following is one of the most important issues faced by many computer-numerical-control(CNC) machine tools to achieve high machining precision. This paper presents a new real-time error compensation method aimi...Contour following is one of the most important issues faced by many computer-numerical-control(CNC) machine tools to achieve high machining precision. This paper presents a new real-time error compensation method aiming at reducing the contouring error caused by facts such as servo lag and dynamics mismatch in parametric curved contour-following tasks. Due to the lack of high-precision contouring-error estimation method for free-form parametric curved toolpath, the error can hardly be compensated effectively. Therefore, an adaptive accurate contouring-error estimation algorithm is proposed first, where a tangential-error backstepping method based on Taylor's expansion is developed to rapidly find the closest point on the parametric curve to the actual motion position. On this foundation, the contouring error is compensated using a proposed nonlinear variable-gain compensation method, where the compensation gain is obtained according to not only the contouring-error magnitude but also its direction variation. The stability of the system after compensation is analyzed afterwards according to the Jury stability criterion.By design of the compensator in accordance with the presented contouring-error compensation method as well as the stability analyzation result, the balance between the response speed and the contour control stability can be effectively made. Experimental tests demonstrate the feasibility of the presented methods in both contouring-error estimation and contour-accuracy improvement.Contributions of this research are significant for enhancing the contour-following performance of the CNC machine tools.展开更多
基金partially funded by Department of Science and Technology (DST), Govt. of Indiaproject SR/ FTP/ETA-61/2010
文摘Gap acceptance theory is broadly used for evaluating unsignalized intersections in developed coun tries. Intersections with no specific priority to any move ment, known as uncontrolled intersections, are common in India. Limited priority is observed at a few intersections, where priorities are perceived by drivers based on geom etry, traffic volume, and speed on the approaches of intersection. Analyzing such intersections is complex because the overall traffic behavior is the result of drivers, vehicles, and traffic flow characteristics. Fuzzy theory has been widely used to analyze similar situations. This paper describes the application of adaptive neurofuzzy interface system （ANFIS） to the modeling of gap acceptance behavior of rightturning vehicles at limited priority Tintersections （in India, vehicles are driven on the left side of a road）. Field data are collected using video cameras at four Tintersections having limited priority. The data extracted include gap/lag, subject vehicle type, conflicting vehicle type, and driver＇s decision （accepted/rejected）. ANFIS models are developed by using 80 % of the extracted data （total data observations for major road right turning vehicles are 722 and 1,066 for minor road right turning vehicles） and remaining are used for model vali dation. Four different combinations of input variables are considered for major and minor road right turnings sepa rately. Correct prediction by ANFIS models ranges from 75.17 % to 82.16 % for major road right turning and 87.20 % to 88.62 % for minor road right turning. Themodels developed in this paper can be used in the dynamic estimation of gap acceptance in traffic simulation models.
文摘提出了一种新型液压机械复合调速传动链,该传动链包含了一套完整的行星机构,用来实现输出端功率的合流.有别于传统的机械液压无级变速系统,该传动链中与行星机构匹配的两个输入端,通过变频器与变量泵,都能实现转速的独立变化,从而可以获得更大调速范围的传动链外特性曲线.使用了Matlab/Simulik等仿真工具进行了理论分析,并且通过PAC System RX3i控制器与iFIX人机交互界面进行了试验分析.结果表明:采用双变量复合控制,可显著提升传动链性能研究范围,优化动力匹配.
基金the National Natural Science Foundation of China(Grant Nos 51515081 and 51675081)National Science and Tech-nology Major Project of China(Grant No 2016ZX04001-002)+2 种基金Innovation Project for Supporting High-level Talent in Dalian(Grant No 2016RQ012)Science Fund for Creative Research Groups(Grant No 51621064)the Fundamental Research Funds for the Central Universities(Grant NoDUT17LAB13)
文摘Contour following is one of the most important issues faced by many computer-numerical-control(CNC) machine tools to achieve high machining precision. This paper presents a new real-time error compensation method aiming at reducing the contouring error caused by facts such as servo lag and dynamics mismatch in parametric curved contour-following tasks. Due to the lack of high-precision contouring-error estimation method for free-form parametric curved toolpath, the error can hardly be compensated effectively. Therefore, an adaptive accurate contouring-error estimation algorithm is proposed first, where a tangential-error backstepping method based on Taylor's expansion is developed to rapidly find the closest point on the parametric curve to the actual motion position. On this foundation, the contouring error is compensated using a proposed nonlinear variable-gain compensation method, where the compensation gain is obtained according to not only the contouring-error magnitude but also its direction variation. The stability of the system after compensation is analyzed afterwards according to the Jury stability criterion.By design of the compensator in accordance with the presented contouring-error compensation method as well as the stability analyzation result, the balance between the response speed and the contour control stability can be effectively made. Experimental tests demonstrate the feasibility of the presented methods in both contouring-error estimation and contour-accuracy improvement.Contributions of this research are significant for enhancing the contour-following performance of the CNC machine tools.
