A novel discrete-time reaching law was proposed for uncertain discrete-time system,which contained process noise and measurement noise.The proposed method reserves all the advantages of discrete-time reaching law,whic...A novel discrete-time reaching law was proposed for uncertain discrete-time system,which contained process noise and measurement noise.The proposed method reserves all the advantages of discrete-time reaching law,which not only decreases the band width of sliding mode and strengthens the system robustness,but also improves the dynamic performance and stability capability of the system.Moreover,a discrete-time sliding mode control strategy based on Kalman filter method was designed,and Kalman filter was employed to eliminate the influence of system noise.Simulation results show that there is no chattering phenomenon in the output of controller and the state variables of controlled system,and the proposed algorithm is also feasible and has strong robustness to external disturbances.展开更多
Implementation of efficient vibration control schemes for seismically excited structures is becoming more and more important in recent years.In this study,the influence of different control schemes on the dynamic perf...Implementation of efficient vibration control schemes for seismically excited structures is becoming more and more important in recent years.In this study,the influence of different control schemes on the dynamic performance of a frame structure excited by El Centro wave,with an emphasis on reaching law based control strategies,is examined.Reaching law refers to the reachable problem and criteria for the sliding state of a control system.Three reaching laws are designed to present different sliding mode control strategies by incorporating a state space model that describes structural dynamic characteristics of a frame structure.Both intact and damaged structures are studied by using the aforementioned control strategies.The influence of different structural damage extents,control locations and reaching law based control methods are further investigated.The results show that the structure can be well controlled using the sliding mode strategy when the induced structural damage extent does not exceed the standard percentage for considering the structure was damaged,which is 20%reduction in structure stiffness,as reported in the literature.The control effectiveness is more satisfactory if the control location is the same as the direction of external excitation.Furthermore,to study the chattering phenomenon of the sliding mode control method,approximation and detail components extracted from the phase plots of the sliding mode control system are compared via wavelet transform at different scales.The results show that for the same type of control law,the system behaves with similar chattering phenomenon.展开更多
Sliding mode control(SMC) becomes a common tool in designing robust nonlinear control systems, due to its inherent characteristics such as insensitivity to system uncertainties and fast dynamic response.Two modes are ...Sliding mode control(SMC) becomes a common tool in designing robust nonlinear control systems, due to its inherent characteristics such as insensitivity to system uncertainties and fast dynamic response.Two modes are involved in the SMC operation, namely reaching mode and sliding mode.In the reaching mode, the system state is forced to reach the sliding surface in a finite time.The major drawback of the SMC approach is the occurrence of chattering in the sliding mode, which is undesirable in most applications.Generally, the trade-off between chattering reduction and fast reaching time must be considered in the conventional SMC design.This paper proposes SMC design with a novel reaching law called the exponential rate reaching law(ERRL) to reduce chattering, and the control structure of the converter is designed based on the multiinput SMC that is applied to a three-phase AC/DC power converter.The simulation and experimental results show the effectiveness of the proposed technique.展开更多
基金Project(50721063) supported by the National Natural Science Foundation of China
文摘A novel discrete-time reaching law was proposed for uncertain discrete-time system,which contained process noise and measurement noise.The proposed method reserves all the advantages of discrete-time reaching law,which not only decreases the band width of sliding mode and strengthens the system robustness,but also improves the dynamic performance and stability capability of the system.Moreover,a discrete-time sliding mode control strategy based on Kalman filter method was designed,and Kalman filter was employed to eliminate the influence of system noise.Simulation results show that there is no chattering phenomenon in the output of controller and the state variables of controlled system,and the proposed algorithm is also feasible and has strong robustness to external disturbances.
文摘Implementation of efficient vibration control schemes for seismically excited structures is becoming more and more important in recent years.In this study,the influence of different control schemes on the dynamic performance of a frame structure excited by El Centro wave,with an emphasis on reaching law based control strategies,is examined.Reaching law refers to the reachable problem and criteria for the sliding state of a control system.Three reaching laws are designed to present different sliding mode control strategies by incorporating a state space model that describes structural dynamic characteristics of a frame structure.Both intact and damaged structures are studied by using the aforementioned control strategies.The influence of different structural damage extents,control locations and reaching law based control methods are further investigated.The results show that the structure can be well controlled using the sliding mode strategy when the induced structural damage extent does not exceed the standard percentage for considering the structure was damaged,which is 20%reduction in structure stiffness,as reported in the literature.The control effectiveness is more satisfactory if the control location is the same as the direction of external excitation.Furthermore,to study the chattering phenomenon of the sliding mode control method,approximation and detail components extracted from the phase plots of the sliding mode control system are compared via wavelet transform at different scales.The results show that for the same type of control law,the system behaves with similar chattering phenomenon.
文摘Sliding mode control(SMC) becomes a common tool in designing robust nonlinear control systems, due to its inherent characteristics such as insensitivity to system uncertainties and fast dynamic response.Two modes are involved in the SMC operation, namely reaching mode and sliding mode.In the reaching mode, the system state is forced to reach the sliding surface in a finite time.The major drawback of the SMC approach is the occurrence of chattering in the sliding mode, which is undesirable in most applications.Generally, the trade-off between chattering reduction and fast reaching time must be considered in the conventional SMC design.This paper proposes SMC design with a novel reaching law called the exponential rate reaching law(ERRL) to reduce chattering, and the control structure of the converter is designed based on the multiinput SMC that is applied to a three-phase AC/DC power converter.The simulation and experimental results show the effectiveness of the proposed technique.
