Single-cell profiling of the pig cecum at various developmental stages

The gastrointestinal tract is essential for food digestion,nutrient absorption,waste elimination,and microbial defense.Single-cell transcriptome profiling of the intestinal tract has greatly enriched our understanding of cellular diversity,functional heterogeneity,and their importance in intestinal tract development and disease.Although such profiling has been extensively conducted in humans and mice,the single-cell gene expression landscape of the pig cecum remains unexplored.Here,single-cell RNA sequencing was performed on 45572 cells obtained from seven cecal samples in pigs at four different developmental stages(days(D)30,42,150,and 730).Analysis revealed 12 major cell types and 38 subtypes,as well as their distinctive genes,transcription factors,and regulons,many of which were conserved in humans.An increase in the relative proportions of CD8^(+)T and Granzyme A(low expression)natural killer T cells(GZMA^(low)NKT)cells and a decrease in the relative proportions of epithelial stem cells,Tregs,RHEX^(+)T cells,and plasmacytoid dendritic cells(pDCs)were noted across the developmental stages.Moreover,the post-weaning period exhibited an up-regulation in mitochondrial genes,COX2 and ND2,as well as genes involved in immune activation in multiple cell types.Cell-cell crosstalk analysis indicated that IBP6^(+)fibroblasts were the main signal senders at D30,whereas IBP6^(−)fibroblasts assumed this role at the other stages.NKT cells established interactions with epithelial cells and IBP6^(+)fibroblasts in the D730 cecum through mediation of GZMA-F2RL1/F2RL2 pairs.This study provides valuable insights into cellular heterogeneity and function in the pig cecum at different development stages.

Mobility of Various Intervariant Interfaces in 18R Martensite in a Cu-Zn-Al Alloy Part Ⅰ: In-situ Observations

The motion of intervariant intedeces under the action of applied stress in the internally faulted 18R martensite in a Cu-Zn-Al shape memory alloy has been studied. Transmission electron microscopy in situ observations show that the interfaces between 24 martensite variants have different reaction to applied stress. The A/C type and A/B type interfaces have good mobil-ity, the A/D type interface has bad mobiIity, and the different-group-intervariant interfaces are basically immobile.

Influence of various shapes of nanoparticles on unsteady stagnation-point flow of Cu-H_(2)O nanofluid on a flat surface in a porous medium:A stability analysis

The nanofluid and porous medium together are able to fulfill the requirement of high cooling rate in many engineering problems.So,here the impact of various shapes of nanoparticles on unsteady stagnation-point flow of Cu-H_(2)O nanofluid on a flat surface in a porous medium is examined.Moreover,the thermal radiation and viscous dissipation effects are considered.The problem governing partial differential equations are converted into self-similar coupled ordinary differential equations and those are numerically solved by the shooting method.The computed results can reveal many vital findings of practical importance.Firstly,dual solutions exist for decelerating unsteady flow and for accelerating unsteady and steady flows,the solution is unique.The presence of nanoparticles affects the existence of dual solution in decelerating unsteady flow only when the medium of the flow is a porous medium.But different shapes of nanoparticles are not disturbing the dual solution existence range,though it has a considerable impact on thermal conductivity of the mixture.Different shapes of nanoparticles act differently to enhance the heat transfer characteristics of the base fluid,i.e.,the water here.On the other hand,the existence range of dual solutions becomes wider for a larger permeability parameter related to the porous medium.Regarding the cooling rate of the heated surface,it rises with the permeability parameter,shape factor(related to various shapes of Cu-nanoparticles),and radiation parameter.The surface drag force becomes stronger with the permeability parameter.Also,with growing values of nanoparticle volume fraction,the boundary layer thickness(BLT)increases and the thermal BLT becomes thicker with larger values of shape factor.For decelerating unsteady flow,the nanofluid velocity rises with permeability parameter in the case of upper branch solution and an opposite trend for the lower branch is witnessed.The thermal BLT is thicker with radiation parameter.Due to the existence of dual solutions,a linear stability analysis is made and it is concluded that the upper branch and unique solutions are stable solutions.

Mobility of Various Intervariant Interfaces in 18R Martensitein a Cu-Zn-Al AlloyPart Ⅱ: Some Theoretical Considerations

Detailed crystallographic analysis has been undertaken on the various combinations Of 24 martensite variants in the 18R martensite of a Cu-Zn-Al shape memory alloy. Based upon the calculated crystallographic data, the interface energy of different twin interfaces was calculated using a lowangle-grain-interface model. For the variant/variant pairs in a self-accommodating group. the A/C type and A/B type interfaces have low interface energy, and A/D type interface is an intermediate one. In contrast, the intervariant interfaces that belong to different plate groups have high intrface energy. The calculated results are consiStent with the previous observations of the mobility of intervariant interfaces.

Fluoridation routes,function mechanism and application of fluorinated/fluorine-doped nanocarbon-based materials for various batteries:A review

With the popularity and widespread applications of electronics,higher demands are being placed on the performance of battery materials.Due to the large difference in electronegativity between fluorine and carbon atoms,doping fluorine atoms in nanocarbon-based materials is considered an effective way to improve the performance of used battery.However,there is still a blank in the systematic review of the mechanism and research progress of fluorine-doped nanostructured carbon materials in various batteries.In this review,the synthetic routes of fluorinated/fluorine-doped nanocarbon-based(CF_x)materials under different fluorine sources and the function mechanism of CF_x in various batteries are reviewed in detail.Subsequently,judging from the dependence between the structure and electrochemical performance of nanocarbon sources,the progress of CF_x based on different dimensions(0D–3D)for primary battery applications is reviewed and the balance between energy density and power density is critically discussed.In addition,the roles of CF_x materials in secondary batteries and their current applications in recent years are summarized in detail to illustrate the effect of introducing F atoms.Finally,we envisage the prospect of CF_x materials and offer some insights and recommendations to facilitate the further exploration of CF_x materials for various high-performance battery applications.

The influence of different types of satisfaction on loyalty on C2C online shopping platform:From the perspective of sellers and the platform

With the rise and development of major types of platforms,the competition for resources has become extremely fierce,and the market share of C2C platforms has been seriously threatened by the loss of resources.Therefore,building and maintaining buyers’satisfaction and loyalty to C2C platforms is critical to the survival and sustainability of C2C platforms in China.However,the current knowledge on how platform satisfaction and loyalty are constructed in the C2C e-commerce environment is incomplete.In this study,seller-based satisfaction and platform-based satisfaction are constructed separately.We further distinguish seller-based transaction satisfaction into economic and social satisfaction and explore their antecedents and consequences.To test our research hypotheses,we conduct a survey and collect data from a real online market(Taobao website).The results show that seller-based transaction satisfaction positively affects platform-based overall satisfaction and loyalty,and that perceived product quality,perceived assurance,and perceived price fairness all have a significant effect on economic satisfaction,whereas perceived relationship quality and perceived empathy significantly influence social satisfaction.These findings help us understand the literature related to customer satisfaction in the context of C2C in China and provide inspiration for online sellers and platforms.

Multifunctional AlPO_(4)reconstructed LiMn_(2)O_(4)surface for electrochemical lithium extraction from brine

LiMn_(2)O_(4)(LMO)electrochemical lithium-ion pump has gained widespread attention due to its green,high efficiency,and low energy consumption in selectively extracting lithium from brine.However,collapse of crystal structure and loss of lithium extraction capacity caused by Mn dissolution loss limits its industrialized application.Hence,a multifunctional coating was developed by depositing amorphous AlPO_(4)on the surface of LMO using sol-gel method.The characterization and electrochemical performance test provided insights into the mechanism of Li^(+)embedment and de-embedment and revealed that multifunctional AlPO_(4)can reconstruct the physical and chemical state of LMO surface to improve the interface hydrophilicity,promote the transport of Li^(+),strengthen cycle stability.Remarkably,after 20 cycles,the capacity retention rate of 0.5AP-LMO reached 93.6%with only 0.147%Mn dissolution loss.The average Li^(+)release capacity of 0.5AP-LMO//Ag system in simulated brine is 28.77 mg/(g h),which is 90.4%higher than LMO.Encouragingly,even in the more complex Zabuye real brine,0.5AP-LMO//Ag can still maintain excellent lithium extraction performance.These results indicate that the 0.5AP-LMO//Ag lithium-ion pump shows promising potential as a Li^(+)selective extraction system.

Measurement Uncertainty Analysis of the Rotary-scan Method for the Measurable Dimension of Cylindrical Workpieces

The measurement uncertainty analysis is carried out to investigate the measurable dimensions of cylindrical workpieces by the rotary-scan method in this paper.Due to the difficult alignment of the workpiece with a diameter of less than 3 mm by the rotary scan method,the measurement uncertainty of the cylindrical workpiece with a diameter of 3 mm and length of 50 mm which is measured by a roundness measuring machine,is evaluated according to GUM(Guide to the Expression of Uncertainty in Measurement)as an example.Since the uncertainty caused by the eccentricity of the measured workpiece is different with the dimension changing,the measurement uncertainty of cylindrical workpieces with other dimensions can be evaluated the same as the diameter of 3 mm but with different eccentricity.Measurement uncertainty caused by different eccentricities concerning the dimension of the measured cylindrical workpiece is set to simulate the evaluations.Compared to the target value of the measurement uncertainty of 0.1μm,the measurable dimensions of the cylindrical workpiece can be obtained.Experiments and analysis are presented to quantitatively evaluate the reliability of the rotary-scan method for the roundness measurement of cylindrical workpieces.

Study of total phenol,flavonoids contents and phytochemical screening of various leaves crude extracts of locally grown Thymus vulgaris

Objective:To prepare various crude extracts using different polarities of solvent and to quantitatively evaluate their total phenol,flavonoids contents and phytochemical screening of Thymus vulgaris collected from Al Jabal Al Akhdar,Nizwa.Sultanate of Oman.Methods:The leave sample was extracted with methanol and evaporated.Then it was defatted with water and extracted with different polarities organic solvents with increasing polarities.The prepare hexane,chloroform,ethyl acetate,hutanol and methanol crude extracts were used for their evaluation of total phenol,flavonoids contents and phytochemical screening study.The established conventional metliods were used for quantitative determination of total phenol,flavonoids contents and phytochemical screening.Results:Phytochemical screening for various crude extracts were tested and shown positive result for flavonoids,saponins and steroids compounds.The result for total phenol content was the highest in hutanol and the lowest in methanol crude extract whereas the total flavonoids contents was the highest in methanol and the lowest hexane crude extract.Conclusions:The crude extracts from locally grown Thymus vulgaris showed high concentration of flavonoids and it could be used as antibiotics for different curable and uncurable diseases.

Fabrication of High-Density Out-of-Plane Microneedle Arrays with Various Heights and Diverse Cross-Sectional Shapes

Out-of-plane microneedle structures are widely used in various applications such as transcutaneous drug delivery and neural signal recording for brain machine interface.This work presents a novel but simple method to fabricate high-density silicon(Si)microneedle arrays with various heights and diverse cross-sectional shapes depending on photomask pattern designs.The proposed fabrication method is composed of a single photolithography and two subsequent deep reactive ion etching(DRIE)steps.First,a photoresist layer was patterned on a Si substrate to define areas to be etched,which will eventually determine the final location and shape of each individual microneedle.Then,the 1st DRIE step created deep trenches with a highly anisotropic etching of the Si substrate.Subsequently,the photoresist was removed for more isotropic etching;the 2nd DRIE isolated and sharpened microneedles from the predefined trench structures.Depending on diverse photomask designs,the 2nd DRIE formed arrays of microneedles that have various height distributions,as well as diverse cross-sectional shapes across the substrate.With these simple steps,high-aspect ratio microneedles were created in the high density of up to 625 microneedles mm^(-2)on a Si wafer.Insertion tests showed a small force as low as~172μN/microneedle is required for microneedle arrays to penetrate the dura mater of a mouse brain.To demonstrate a feasibility of drug delivery application,we also implemented silk microneedle arrays using molding processes.The fabrication method of the present study is expected to be broadly applicable to create microneedle structures for drug delivery,neuroprosthetic devices,and so on.

Uptake,Depuration and Subcellular Distribution of Cadmium in Various Tissues of Perna viridis

Green-lipped mussels (Perna viridis) were collected from a local mariculture site and placed in pre-cleaned sea water tanks containing 0, 0.2, 0.5 and 1.3 μg/ml CdCl2. The level of Cd in the gill, viscera and gonad was measured. The concentration of Cd in the 3 tissues increased linearly over 4 days' of exposure. The rate of uptake depends on the concentration of Cd in the water. In the 3 tissues studied, the maximum rate of uptake (Vmax) was highest in the gill (500μg/g dry weight/day), followed by viscera (100μg/g dry weight/day) and gonad (56.8 μg/g dry weight/day). The majority of the Cd taken up was bound to a fraction of the heat-stable proteins similar to metallothioneins. The rate of Cd depuration from the tissues was poor. There was no change in Cd concentration over 8 days' depuration in clean water

Study on the Singlet and Triplet StateElectron Transfer between Hypocrellin A and Aromatic Amines in Solvents of Various Polarity

In this paper, the singlet and triplet state electron transfer processes between hypocrellin A(HA) and aromatic amines in solvents of various polarity have been studied by fluorescence and time-resolved transient absorption spectra. The results show,in.polar solvent, the quenching of HA fluorescence by aromatic amines results in Stern-Volmer plot, the investigation of transient absorption indicated that triplet-state electron transfer process from 3HA to the ground-state of amines occured, and the wines of the singlet and triplet state electron transfer rate constant were calculated, however in weak polar solvent, only the triplet-triplet absorption of HA was observed.

Vibrating-Sliding Motion of Caisson Breakwaters Under Various Breaking Wave Impact Forces

Sliding is one of the principal failure types of caisson breakwaters and is an essential content of stability examination in caisson breakwater design. Herein, the mass-spring-dashpot model of caisson-base system is used to simulate the vibrating-sliding motion of the caisson under various types of breaking wave impact forces, i.e., single peak impact force, double peak impact force, and shock-damping oscillation impact force. The effects of various breaking wave impacts and the sliding motion on the dynamic response behaviors of caisson breakwaters are investigated and the calculation of relevant system parameters is discussed. It is shown that the dynamic responses of the caisson are significantly different under different types of breaking wave impact forces even when the amplitudes of impact forces are equal. The amplitude of dynamic response of the caisson is lower under single peak impact excitation than that under double peak impact or shock-damping oscillation impact excitation. Though the displacement of the caisson is large due to sliding, the rotation, the sliding force and the overturning moment of the caisson are significantly reduced.

Observations on the Efficacy of Various Forms of Selenium for Livestock: A Review

Since 1957, selenium has found extensive use in livestock production to maintain an adequate selenium status in animals in areas of soil and feed/forage deficiency. Selenium may be given directly to livestock, or applied as a fertilizer amendment to increase selenium content of their feeds. This paper addresses the area of direct supplementation, which includes oral and parenteral supplementation, and with ruminant animals the use of slow-release boluses. Various chemical forms of selenium have been examined as supplemental sources, with sodium selenite being the earliest compound of choice. Comnbination of selenium supplementation with other livestock managernent practices led to use of selenium dioxide, which avoided solubility problems with selenite but produced effective responses. Barium salts have been used with some success as supplemental selenium sources. Experience with ruminal boluses has shown that high pressure pelleting of increased grain size selenium, in hollow pellets, has prolonged their useful life. Attention has been paid recently to residual selenium returned to the soil from livestock supplementation practices and the resulting opinion is that currently approved practices are acceptable from the point of view of environmental quality

Relationship between glutathione and malonaldehyde levels in erythrocytes and the deformation index of erythrocyte in patients at various periods following acute cerebral infarction

BACKGROUND： Glutathione, as an in vivo free radical scavenger, plays an important role in the anti-oxidation defense mechanism in patients with acute cerebral infarction. OBJECTIVE： To observe the relationship between the levels of glutathione （GSH） and malonaldehyde （MDA）, the metabolite of lipid peroxidation, in erythrocyte and deformation index of erythrocyte in patients at various periods following acute cerebral infarction. DESIGN： Controlled observation.SETTING： Qilu Hospital of Shandong University and Institute of Cerebrovascular Disease of Qingdao Medical College. PARTICIPANTS： We chose 98 inpatients with acute cerebral infarction from Department of Neurology, Qilu Hospital of Shandong University from January to December 2000 , serving as cerebral infarction group, including 50 male and 48 female, with mean age of （62±7）years. There were 23 cases found on the 1^st day after onset; 25 cases on the 3^rd day after onset; 25 cases on the 7^th day after onset; 25 cases on the 14th days after onset, and they were all confirmed by craniocerebral CT or MRI. Another 30 homeochronous inpatients with neurosis, cervical syndrome, lumbar intervertebral disc herniation and motor neuron disease were chosen as control group, including 20 male and 10 female, with mean age of （52±8）years . There was no significant difference in age and gender distribution between two groups （P 〉 0.05）. Patients in the two groups were informed of detected index.METHODS：①Ulnar venous blood was chosen from the patients who were fasted on the 1^st, 3^rd,7^th and 14^th days after onset. Deformation index of erythrocyte was measured with BL88-CKX laser diffraction erythrocyte deformeter and photographing was performed. GSH level in erythrocyte was measured with DTNB assay introduced by Beu-tler. MDA level in erythrocyte was measured with modified thiobarbituric acid colorimetric method.②At each sample collecting , according to the criteria accepted by the Fourth National Conference of Cerebrovascular Disease, intergrant of neurologic impairment 〈 15 points was regarded as mild （n=46）, 15 to 30 points as moderate （n=40）and, 〉 30 points as severe （n=12）. ③ t test was used to compare data between two groups , and linear correlation analysis was used in relationship analysis among indexes. MAIN OUTCOME MEASURES ：① Comparison of erythrocyte GSH and MDA levels and deformation index of erythrocyte at various periods between patients with acute cerebral infarction and controls. ②Correlation of erythrocyte GSH level with erythrocyte MDA level and with deformation index of erythrocyte in patients with cerebral infarction . ③ Relationship between erythrocyte GSH level and severity of disease in patients with acute cerebral infarction. RESULTS： Totally 98 patients with acute cerebral infarction and 30 controls all entered the stage of result analysis. ① Erythrocyte GSH level and deformation index of erythrocyte were lower on the 1^st, 3^rd, 7^th and 14^th days after onset in cerebral infarction group than in control group （P 〈 0.05-0.01）, and erythrocyte MDA level was significantly higher in cerebral infarction group than in control group （P 〈 0.05-0.01）. The three indexes changed most significantly on day 3 after onset in patients, and began to recover or decrease on day 7 after onset and inclined to be normal on day 14 after onset. ② Erythrocyte GSH level was significantly negatively correlated with erythrocyte MDA level in patients with acute cerebral infarction on the 1^st, 3^rd, 7^th and 14^th days after onset （r=-0.534, -0.713, -0.645, -0.656, respectively, P 〈 0.05-0.01 ） ,and significantly positively correlated with erythrocyte deformation index （t-=0.502, 0.560, 0.455, 0.504, respectively, P 〈 0.05）. ③Erythrocyte GSH level was significantly lower in moderate or severe patients with acute cerebral infarction than in mild patients[（0.215±0.088）,（0.192±0.102）, （0.281±0.090） g/L, P〈 0.05]. CONCLUSION：①Erythrocyte GSH and MDA levels and deformation index of erythrocyte change significantly on the 3^rd day following acute cerebral infarction. Index detection results gradually tended to be normal on from the 7^th day to 14^th days day after onset. ② Change of erythrocyte GSH level can reflect the severity of disease of patients with acute cerebral infarction.③Decrease of erythrocyte GSH level in patients with acute cerebral infarction is one of reasons that result in the decrease of deformation ability of erythrocyte.

Contamination of Prohibited Substances in Various Food Products in Guangzhou, China

The use of antibiotics to maintain animal health has widely been practiced,for both therapeutic and prophylactic purposes.Along with the identification of serious adverse effects of some antibiotics on human and domestic animals[1],chloramphenicol.

Efficiency of Model Induction Motor Using Various Non-Oriented Electrical Steels

The performance of a 3-phase 6-pole 400 W inverter-drive induction motor was investigated using a variety of non-oriented electrical steels for stator core at PWM inverter fundamental wave frequencies of 30 to 300 Hz. There existed an optimum Si content of the material depending on the tooth flux density. Both reduction of material thickness and stress-relief annealing of the stator core improved the motor efficiency. The influence of Si content on the efficiency was small at lower PWM frequencies, while at higher frequencies the motor efficiency increased with increasing Si content. The Cu loss WC increased and the Fe loss Wi counteractiveiy decreasedwith increasing Si content at lower frequencies; while at higher frequencies Wi had dominant effect on the efficiency. Newly developed materials RMA, having lower Fe losses after stress-relief annealing and higher flux densities with lower Si contents, showed motor efficiencies superior to conventional J1S grade materials with comparable Fe losses.

Assessment of the conventional molybdenum-blue and magnesium-induced coprecipitation procedures in phosphorus measurement in various aquatic environments

Phosphorus （P） is an essential nutrient utilized by all organisms for energy transport and growth. Both the conventional molybdenum-blue method and the magnesium-induced coprecipitation （MAGIC） procedures were applied for the measurement of dissolved inorganic phosphorus （DIP） and total dissolved phosphorus （TDP） in more than 840 water samples collected between 2003 and 2005, including seawater （the Huanghai Sea, the East China Sea, and the northern South China Sea）, water from rivers and estuaries （the Changjiang, the Huanghe, and the major rivers emptying into the Jiaozhou Bay）, groundwater （in the drainage basin surrounding the Jiaozhou Bay）, rain-water, and aquaculture water samples. The MAGIC method allows the investigation of phosphorus distributions and cycling for systems in which DIP is below the detection limits of conventional methods. Comparison between the two methods demonstrated that the concentrations obtained with both methods were significantly correlated. The differences of DIP and TDP concentrations measured with the two methods were higher when the concentrations of DIP and TDP were lower, implying the lower reproducibility at low concentrations. The concentration differences increase with the increase in the proportion of DOP in TDP, which indicates that the discrepancy of DIP concentrations measured with the two methods increases when the DOP concentration is high. The discrepancies indicated that the composition of P compounds differs depending on sample sources and water type; it would be useful to infer the presence of different phosphorus compound pools from differences between the two methods. This study indicates the potential presence of a pool of alkaline-labile compounds for samples from rainwater and rivers and estuaries surrounding the Jiaozhou Bay; the potential presence of acid-labile compounds that were adsorbed by Mg（OH）2 for samples from the Changjiang Estuary, Huanghai Sea, East China Sea, and groundwater; the potential presence of a substantial pool of acid-labile compounds that were not adsorbed by Mg（OH）2 for samples from the Huanghe Estuary, aquaculture water, the East China Sea algal bloom water, and the northern South China Sea.

High Coercivity Sr-ferrite Magnetic Thin Films Induced by Various Underlayers

Three kinds of oxide underlayers, namely Si02, ZnO and Al2O3, were deposited prior to the sputtering of Sr-ferrite films, respectively, in order to induce the optimum grain morphology and the texture of the films. A Sr-ferrite film with an easy axis in-plane orientation was induced by SiO2 underlayer. In contrast, it prefers to be perpendicular to film plane for the cases of ZnO and Al2O3 underlayers. The optimum magnetic properties of the former film along film plane are: 4πMr=1.7 kG, iHc=5.35 kOe, and Sq=0.59, which are mainly dominated by the exchange coupling effect, determined by Wohlfarth's remanence analysis, among grains. While those for the films with an easy axis perpendicular to film plane can be as high as 4πMr=3.72 kG, iHc=6.42 kOe, and Sq=0.82, which are mainly dominated by the magnetostatic interaction among grains.