Dynamic Behaviors of Axially Moving Viscoelastic Plate with Varying Thickness

Structural components of varying thickness draw increasing attention these days due to economy and light-weight considerations. In view of the absence of research in vibration analysis of viscoelastic plate with varying thickness, this study devotes to investigate the dynamic behaviors of axially moving viscoelastic plate with varying thickness. Based on the thin plate theory and the two-dimensional viscoelastic differential constitutive relation, the differential equation of motion of the axially moving viscoelastic rectangular plate is derived, the plate constituted by Kelvin-Voigt model has linearly varying thickness in the y-direction. The dimensionless complex frequencies of axially moving viscoelastic plate with four edges simply supported are calculated by the differential quadrature method, curves of real parts and imaginary parts of the first three-order dimensionless complex frequencies versus dimensionless moving speed are obtained, the effects of the aspect ratio, thickness ratio, the dimensionless moving speed and delay time on the dynamic behaviors of the axially moving viscoelastic rectangular plate with varying thickness are analyzed. When other parameters keep constant, with the decrease of thickness ratio, the real parts of the first three-order natural frequencies decrease, and the critical divergence speeds of various modes decrease too, moreover, whether the delay time is large or small, the frequencies are all complex numbers.

Free vibrations of simply supported nonhomogeneous isotropic rectangular plates of bilinearly varying thickness and elastically restrained edges against rotation using Rayleigh-Ritz method

This paper addresses the free transverse vibrations of thin simply supported nonhomogeneous isotropic rectangular plates of bilinearly varying thickness with elastically restrained edges against rotation. The Gram-Schmidt process has been used to generate two-dimensional boundary characteristic orthogonal polynomials, which have been used in the Rayleigh-Ritz method to study the problem. The lowest three frequencies have been computed for various values of nonhomogeneous parameters, thickness parameters, aspect ratio and flexibility parameters. A comparison of the results with those available in the literature has been made. Three-dimensional mode shapes for the specified plate have been presented.

NON-LINEAR DYNAMIC BEHAVIOR OF THERMOELASTIC CIRCULAR PLATE WITH VARYING THICKNESS SUBJECTED TO NONCONSERVATIVE LOADING

The non-linear dynamic behaviors of thermoelastic circular plate with varying thickness subjected to radially uniformly distributed follower forces are considered. Two coupled non-linear differential equations of motion for this problem are derived in terms of the transverse deflection and radial displacement component of the mid-plane of the plate. Using the Kantorovich averaging method, the differential equation of mode shape of the plate is derived, and the eigenvalue problem is solved by using shooting method. The eigencurves for frequencies and critical loads of the circular plate with unmovable simply supported edge and clamped edge are obtained. The effects of the variation of thickness and temperature on the frequencies and critical loads of the thermoelastic circular plate subjected to radially uniformly distributed follower forces are then discussed.

Optimization of a guided-mode resonance filter by varying the thickness of the buffer layer

In this Letter, we demonstrate that by adjusting the thickness of the buffer layer, the optical responses of a guided-mode resonance filter （GMRF） can be improved for sensor applications. The GMRF is fabricated using a replica molding with a plastic substrate and a UV-curable polymer. SiO2 buffer layers of different thicknesses are deposited before the waveguide-layer deposition. The sensitivity of the GMRFs decreases slightly with in- creasing SiO2 layer thickness. By contrast, the full width at half-maximum reduces substantially with increasing SiO2 layer thickness, resulting in the improvement of the overall figure of merit.