Geology and Geochemistry of K-feldspar Veins in Lamprophyre at the Zhenyuan Gold Deposit,Yunnan,Southwest China:Implications for Gold Mineralization

Lamprophyres typically appear in hydrothermal gold deposits.The relationship between lamprophyres and gold deposits is investigated widely.Some researchers suggest that the emplacement of lamprophyres triggers gold mineralization,whereas others hypothesize that the formation of lamprophyres increases the fertility of mantle sources and ore-forming fluids.K-feldspar veins,with ages between those of lamprophyres and gold deposits,appear in lamprophyres in Zhenyuan.Therefore,K-feldspar veins are ideal for investigating the relationship between lamprophyres and gold deposits.Phlogopite in K-feldspar veins has lower Mg#,Ni,and Cr contents and higher TiO2,Li,Ba,Sr,Sc,Zr,Nb,and Cs contents than phlogopite in lamprophyres.The in-situ Sr isotopic values of apatites(0.7063–0.7066)in K-feldspar veins are within the range for apatites(0.7064–0.7078)from lamprophyres.High large-ion lithophile element concentrations and low Nb and Ta concentrations in phlogopite from lamprophyres,in addition to high(87Sr/86Sr)i values of apatite(0.7064–0.7078),indicate that the magma parental to these phlogopite and apatite crystals is derived from an enriched mantle.Kfeldspar veins are genetically correlated with lamprophyres,whereas sulfide mineral assemblage and trace element compositions of pyrite in K-feldspar veins suggest that K-feldspar veins in lamprophyres are not directly related to gold mineralization of the Zhenyuan deposit.

THE METALLOGENIC STRUCTURE OF VEIN-SHAPED LEAD-ZINCDEPOSIT IN HENGSHANLING-SHEXINGPING,CHENZHOU,HUNAN

ＴＨＥＭＥＴＡＬＬＯＧＥＮＩＣＳＴＲＵＣＴＵＲＥＯＦＶＥＩＮ－ＳＨＡＰＥＤＬＥＡＤ－ＺＩＮＣＤＥＰＯＳＩＴＩＮＨＥＮＧＳＨＡＮＬＩＮＧ－ＳＨＥＸＩＮＧＰＩＮＧ，ＣＨＥＮＺＨＯＵ，ＨＵＮＡＮＳｕｎＺｈｅｎｇｉａＰｅｎｇＥｎｓｈｅｎｇＺｈｕＹｕｄｅ（Ｄｅ...

Jet formation and penetration performance of a double-layer charge liner with chemically-deposited tungsten as the inner liner

This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.

U-Pb SHRIMP Dating of Zircon from Quartz Veins of the Yangshan Gold Deposit in Gansu Province and Its Geological Significance

The Yangshan gold deposit is a super-large fine-grained disseminated gold deposit located in southern Gansu Province. Its metallogenic age has been determined by using the cathodoluminescence image and ion probe U-Pb dating techniques. It is found that zircons from quartz veinlet of the fine-grained disseminated gold ore show characters of magmatic origin with prism idiomorphism, oscillatory zoning and dominant Th/U ratios of 0.5-1.5. Three main populations of zircons are obtained, giving average 206Pb/238U ages of 197.6±1.7 Ma, 126.9±3.2 Ma and 51.2±1.3 Ma respectively. The first age corresponds to the K-Ar age of the plagiogranite dike, while the latter two ages indicate that buried Cretaceous and Tertiary intrusives exist in the orefield, suggesting that the Yangshan gold deposit was genetically related to the three magmatic hydrothermal activities. By contrast, zircons from coarse gold-bearing quartz vein in the mining area are much older than the host rock, indicating that the vein was formed earlier and was not contaminated by later magmatic fluids. It is concluded that the coupling of multiperiodic hydrothermal activities in the mining area has contributed a lot to mineralization of the Yangshan gold deposit.

The Bulong Gold Deposit-a Quartz-Barite Vein Type Gold Deposit in Xinjiang:Geological Characteristics and S, He and Ar Isotopic Compositions

The Bulong gold deposit, located in the southwest Tianshan in China, occurs in the Upper Devonian finegrained clastic rocks. The gold orebodies are controlled by an gently inclined interlayer fractured zone. They are hosted only in quartz-barite veins though there are barite veins and quartz veins in the ore district. The δ34S values of pyrite in the ores range from 14.6‰ to 19.2‰ and those of barite from 35.0‰ to 39.6‰, indicating that the sulfur was derived from the strata. 3He/4He ratios of fluid inclusions in pyrite are 0.24-0.82 R/Ra, approximating to that of the crust. The 40Ar/39Ar ratios range from 338 to 471, slightly higher than that of the atmosphere. 40Ar /4He ratios of ore fluids range from 0.015 to 0.412 with a mean of 0.153. Helium and argon isotope compositions of fluid inclusions show that the ore fluids of the Bulong gold deposit were mainly derived from the crust.

Microstructural analysis of a subhorizontal gold-quartz vein deposit at Donalda,Abitibi greenstone belt,Canada:Implications for hydrodynamic regime and fluid-structural relationship

The Donalda gold deposit in the southern part of the Archean Abitibi greenstone belt consists mainly of a subhonzontal gold-quartz vein perpendicular to subvertical shear zones.The 0.3—0.5 m thick vein is characterized by vein-parallel banding structures indicating multiple episodes of fracture opening and mineral precipitation.Measurement of the c-axis of primary growth quartz indicates that quartz preferentially grew perpendicular to the fracture,suggesting open space filling and/or extensional nature of the fracture.Measurement of the orientations of microfractures,veinlets and fluid—inclusion planes（FIPs） crosscutting primary growth quartz indicates that the vein minerals were subject to a vertical maximum principal stress（σ_1）,which is inconsistent with the subhorizontalσ_1 inferred from the regional stress field with N—S shortening.This apparent discrepancy is explained by invoking episodic fluid pressure fluctuation between supralithostatic and hydrostatic regimes accompanied by episodic opening and closing of the sub-horizontal fracture.When fluid pressure was higher than the lithostatic value,the fracture was opened and primary growth minerals were precipitated,whereas when fluid pressure decreased toward the hydrostatic value,the hanging wall of the fracture collapsed,causing collision of protruding primary growth minerals from both sides of the fracture and resulting in formation of vein-parallel deformation bands.The columns where the two facing sides of the fracture collided were subject to higher-than-lithostatic stress due to the bridging effect and reduced support surface area,explaining the development of verticalσ_1.This hypothesis is consistent the fault-valve model,and explains the flipping ofσ_1 without having to change the regional stress field.

Geochemical Trace of Silicon Isotopes of Intrusions and Ore Veins Related to Alkali-rich Porphyry Deposits in Western Yunnan, China

Western Yunnan is the well-known polymetallic province in China. It is characterized by copper-gold mineralization related to Cenozoic alkali-rich porphyry. This paper analyzes the silicon isotope data obtained from four typical alkali-rich porphyry deposits based on the dynamic fractionation principle of silicon isotope. The study shows that the ore materials should originate mainly from alkali-rich magmas, together with silicon-rich mineralizing fluids. The process of mineralization was completed by auto-metasomatism, i.e. silicon-rich mineralizing fluids (including alkali-rich porphyry and wall-rock strata) replaced and altered the country rocks and contaminated with crustal rocks during the crystallization of alkali-rich magmas. Such a process is essentially the continuance of the metasomatism of mantle fluids in crust's mineralization. This provides important evidence of silicon isotopic geochemistry for better understanding the mineralization of the Cenozoic alkali-rich porphyry polymetallic deposits

REE geochemistry of auriferous quartz carbonate veins of Neoarchean Ajjanahalli gold deposit,Chitradurga schist belt,Dharwar Craton,India

REE composition of the carbonates of the auriferous quartz carbonate veins（QCVs） of the Neoarchean Ajjanahalli gold deposit.Chitradurga schist belt.Dharwar Craton,is characterized by U-shaped chondrite normalized REE patterns with both LREE and HREE enrichment and a distinct positive Eu anomaly.As positive Eu anomaly is associated with low oxygen fugacity,we propose that the auriferous fluids responsible for gold mineralization at Ajjanahalli could be from an oxygen depleted fluid.The observed positive Eu anomaly is interpreted to suggest the derivation of the auriferous fluids from a mantle reservoir.The location of Ajjanahalli gold deposit in a crustal scale shear zone is consistent with this interpretation.

Isotopic Chronological Study of the Huangsha-Tieshanlong Quartz Vein-Type Tungsten Deposit and Timescale of Molybdenum Mineralization in Southern Jiangxi Province,China

The Huangsha-Tieshanlong quartz-vein tungsten polymetallic ore deposit, located in the northern Pangushan-Tieshanlong tungsten ore field in eastern Ganxian-Yudu prospecting areas of the Yushan metallogenic belt, is a well-known tungsten deposit in southern Jiangxi province, China. SHRIMP-determined dating of zircons from the Tieshanlong granite yields ages of 168.1±2.1 Ma （n=11, MSWD-1.3）. Rhenium and osmium isotopic dating of molybdenite from the Huangsha quartz-vein tungsten deposit determined by ICP-MS yields a weighted average ages of 153-3 Ma and model ages of 150.22.1 Ma - 155.4-2.3 Ma. The age of the Huangsha tungsten deposit is 10 to 15 Ma later than the Tieshanlong granite, which shows that there might have been another early Late Jurassic magmatic activity between 150 and 160 Ma, a process which is closely related with tungsten mineralization in this area. The Tieshanlong granite, the Hnangsha tungsten deposit and the Pangushan-Tieshanlong ore field were all formed around 150-170 Ma, belonging to products of a Mesozoic second large-scale mineralization. According to the collected molybdenite Re-Os dating results in southern Jiangxi province, the timescale of the associated molybdenum mineralization is 2-6 Ma in the tungsten deposit and the timescale of independent molybdenum mineralization is 1-4 Ma, implying the complexity of tungsten mineralization. Times of molybdenum mineralization are mainly concentrated in the Yanshanian, which includes three stages of 133-135 Ma, 150-162 Ma, and 166-170 Ma, respectively. The 150-162 Ma-stage is in accordance with ages of large-scale WoSn mineralization, which is mainly molybdenum mineralization characterized by associated molybdenum mineralization with development of an even greater-intensity independent molybdenum mineralization. Independent molybdenum mineralization occurred before and after large-scale W-Sn mineralization, which indicates that favorable prospecting period for molybdenum may be in Cretaceous and early late Jurassic.

Auriferous Quartz Veins from the Dongping Gold Deposit, NW Hebei Province and Metallogenesis—Fluid Inclusion Rb-SrIsochron Evidence

The Dongping gold deposit, situated on the northern margin of the North China Platform, is a composite deposit composed of auriferous quartz vein-type and altered rock-type ore bodies. It is hosted in the inner contact zone of an alkaline intrusion which was intruded into Archean metamorphic rocks and was formed not later than the Hercynian peried. Auriferous quartz veins of the deposit are dated with the fluid inclusion Rb-Sr isochron method at 103 ±4Ma, indicating that the gold deposit was formed in the Yenshanian period. 87Sr/86Sr sourcetracing shows the ore-forming materials came dominantly from alkaline intrusions. These results, combined with other isotope and REE data, suggest that the Dengping gold deposit is not a traditional magmatic hydrothermal deposit, but a reworked hydrothermal deposit related to heated and evoved meteoric water.

Formation mechanism of inherent spatial heterogeneity of microstructure and mechanical properties of NiTi SMA prepared by laser directed energy deposition

Ni51Ti49 at.%bulk was additively manufactured by laser-directed energy deposition(DED)to reveal the microstructure evolution,phase distribution,and mechanical properties.It is found that the localized remelting,reheating,and heat accumulation during DED leads to the spatial heterogeneous distribution of columnar crystal and equiaxed crystal,a gradient distribution of Ni4Ti3 precipitates along the building direction,and preferential formation of Ni4Ti3 precipitates in the columnar zone.The austenite transformation finish temperature(Af)varies from-12.65℃(Z=33 mm)to 60.35℃(Z=10 mm),corresponding to tensile yield strength(σ0.2)changed from 120±30 MPa to 570±20 MPa,and functional properties changed from shape memory effect to superelasticity at room temperature.The sample in the Z=20.4 mm height has the best plasticity of 9.6%and the best recoverable strain of 4.2%.This work provided insights and guidelines for the spatial characterization of DEDed NiTi.

Shape model of multi-pass spray deposition plate

Multi- pass spray deposition shows apparent advantages in preparing large scale plates with rapid solidification. Shape model is promoted to obtain excellent shape. Three dimensional mathematical models considering motion of atomization cone and substrate, deposition distance and atomization parameters were used to predict deposited plate’s shape. The results can be used to optimize the process parameters.

Crystallization of NiTi shape memory alloy sputtering-deposition film

The crystallization of NiTi shape memory alloy sputter deposition film in the course of sputtering deposition and that after heat treated were studied. The relationship between the process factors, such as substrate type, temperature, as well as the crystallization when heat treated after plating was investigated. The results show that a new phase precipitates during heat treatment after sputtering deposition and the degree of crystallization among different layers and the stress in grains are obviously different.

Rb-Sr Isotopic Chronology of the Au-Bearing Quartz Veins in Gold Deposits in the Eastern Part of North China Platform

In the eastern part of China there had occurred large\|scale gold mineralization during the Mesozoic, resulting in a large number of important gold ore\|concentrated areas. In this paper we have selected some isotope data (including four gold deposits previously studied and two gold deposits in this work) of Au\|bearing quartz veins of the representative gold deposits in six important gold ore\|concentrated areas in the periphery of the North China Platform and calculated their metallogenic ages using the method of Ludwig (2.90 version). The results show that the representative gold deposits in the six gold ore\|concentrated areas were formed during the Mesozoic.

Ore-forming fluid characteristics and genesis of vein-type lead-zinc mineralization of Xiaohongshilazi deposit,Jilin Province, China

The Xiaohongshilazi mineral deposit in Jilin Province,China,is located in the accretion zone in the northern margin of the North China Block. The deposit contains two types of ore bodies: layered Pb-Zn ore bodies in volcanic rock and vein-hosted Pb-Zn ore bodies controlled by fractures. The vein Pb-Zn ore bodies are strictly controlled by tectonic fracture zones trending in S-N direction,which comprise sulfide veins or sulfidebearing quartz veins distributed along faults or structural fissures. The ores mainly appear mesh-vein and vein structures,and also show solid-solution separation and metasomatic textures. The metal minerals are mainly sphalerite,galena,and pyrite,etc. Wall-rock alteration includes mainly sericitization,chloritization,silicification and carbonatization,etc. Microscope observations and Raman spectroscopy analyses indicate that the oreforming fluid of the vein Pb-Zn ore bodies was mainly magmatic water with low temperature,low salinity,and a shallow depth of metallogenesis( ~ 1.5 km). Sulfur and lead isotope analyses indicate that the sulfide source is mainly formation sulfur or biogenic sulfur,which is similar to the sulfur source of hydrothermal deposit( negative( δ^(34) S values),while the main Pb source was the upper crust with some mantle input. This article argues that the vein Pb-Zn ore body of the Xiaohongshilazi deposit is a low-to medium-temperature hydrothermal vein type related to the formation of a shallow magma chamber.

Locating Mechanism of Quartz Vein Gold Deposits in Rushan, Shandong Province

According to the differences in ore-controlling structural systems and the characteristics of host rocks, textures and structures of ores and mineral associations of ores, quartz vein-type gold deposits in the Rushan area can be divided into the Rushan and Tongling styles. Rushan style gold deposits, occurring in the Kunyushan complex, include Rushan, Tangjiagou and Tongxishan gold mines. They are distributed along four NNE-trending and sinistral, compresso-shear faults with a right stepping array. A prominent characteristic of the gold mineralization is that the orebodies in neighbouring gold deposits distributed in a single ore-controlling fault zone take opposite pitches. Study of the locating structures of the quartz vein gold deposits shows that the Rushan-style gold deposits are characterized by NNE and NE zoning. Therefore, the intersections of the NE direction of the known gold deposit and the neighbouring NNE-trending fault zones are favourable for looking for gold deposits, and the ends of the curving segments of sinistral and right-stepping faults are favourable for looking for large gold deposits. Tongling-style gold deposits occur in the Sanfosan porphyritic monzonitic granite. Emplacement of gold deposits is controlled by arcuate and radiate structures formed during the intrusion of the Sanfoshan porphyritic monzonitic granite; the radiate faults controlled the distribution of orebodies and the arcuate faults controlled the pitch of the orebodies.

PRELIMINARY STUDY ON THE ORE-FORMING CONDITIONS OF THE Au-Pb-QUARTZ VEIN TYPE ORE DEPOSIT,CHINA

There are few Au-Pb-Quartz vein type ore deposits in other countries except China. It might be related to the geohistory and geotectonic background. However, this kind of ore deposit has an important economical significance in China. Its formation is due to the dis-tinctive geological conditions of china. Wendong Au-Pb-Quartz type ore deposit including Wenyu and Dongchuang in Xiaoqinling gold field is the most typical. It is a polygenetic and compound ore deposit, Jintongcha and other deposits lying to the west of it in Xiaoqinling area are Au-Pb-Quartz vein type ore deposits. Others of this area lying to the east of Jintongcha are Au-Quartz vein type. This phenomenon stems from the zonnal distribution of minernal de-posits and the different development of the two major minernalzation stages. The results ob-tained from the fluid inclusion research have supported this inference.

^(40)Ar/^(39)Ar Fast Neutron Activation Ages of Quartz from the Jinman Vein Copper Deposit in Western Yunnan and Their Significance

Quartz samples collected from the Jinman vein copper deposit in the Lanping Basin of western Yunnan were determined by \{\}\+\{40\}Ar/\{\}\+\{39\}Ar fast neutron activation techniques, and the spectra are characterized as being saddle\|shaped. The samples yielded a plateau age of \{58.05\}±\{0.54\} Ma, a minimum appearance age of \{56.76\}±\{0.81\} Ma and an isochron age of \{54.30\}±\{0.15\} Ma, the three ages being close to each other, indicating that the ages of the quartz samples so far determined are true and reliable. The plateau age represents the time of formation of Cu\|bearing quartz veins, which is corresponding to Early Himalayan. This age is also consistent with the time at which a tectonically thermal event (60 Ma) took place within the Lanping Basin, Yunnan Province. In consideration of the fact that copper ore and other ore types in the vast area of western Yunnan are concentrated mainly in the Early Himalayan strata, the authors believe that there must have existed some indispensable key factors leading to metallogenesis on a large scale during the Early Himalayan period in western Yunnan and also constraining in union the formation of ore deposits there.

热液成矿系统构造控矿理论

构造对成矿的控制是热液成矿系统的典型特征之一,系统剖析多重尺度控矿构造的几何学、运动学、动力学、流变学和热力学对认识矿床成因和预测找矿至关重要;而如何实现控矿构造格架、渗透性结构、成矿流体通道和矿化变形网络由静态到多尺度时-空四维动态的转变,查明流体通道和矿床增量生长过程与控制因素,揭示热液成矿系统的构造-流体耦合成矿机制和定位规律是亟待解决的关键科学难题。为此,我们在对已有相关成果系统梳理的基础上,提出了科学构建热液成矿系统构造控矿理论的基本要点与对应方法及应用范畴:(1)流体而非构造是构造控矿理论的中心,热液系统的流体流动与成矿作用受控于断裂带格架及其渗透性结构,其中渗透率是将流体流动与流体压力变化联系起来理解控矿构造的核心;(2)不同控矿构造组合的关键控制是构造差应力和流体压力的大小,而矿化类型的变化可能是由于构造应力场引起的容矿构造方位的不同和赋矿围岩之间的强度差异所致;(3)流体通道的生长始于超压流体储库上游围岩中孤立的微裂隙沿流体压力梯度最大的方向、随裂隙发育且相互连结而形成新的长裂隙,并最终连通形成断裂网络内的流体通道,矿床的增量生长发生在高流体通量的短爆发期,断层反复滑动驱动其内流体压力、流速和应力快速变化,当由此诱发的流体通道生长破坏了流体系统的动态平衡时,随之而来的流体快速降压就成为金属沉淀成矿的关键驱动因素;(4)以热液裂隙-脉系统野外地质观测和构造-蚀变-矿化网络三维填图为基础,通过宏观与微观各级控矿构造相结合、地质历史与构造应力分析相结合、局部与区域点-线-面相结合、浅部与深部相结合、时间与空间相结合、定性和定量相结合,对各种控矿因素开展多学科、多尺度、多层次、全方位综合研究,是应遵循的基本原则;(5)通过构造-蚀变-矿化网络填图,将蚀变-矿化体与控矿构造的类型、形态、规模、产状和间距等几何学特征联系起来,利用热液裂隙-脉系统和断裂网络拓扑学及矿体三维几何结构分析等定量方法查明控矿构造格架和渗透性结构并揭示矿化变形网络的连通性与成矿潜力;(6)合理构建地质模型,选取合适的热力学参数和动力学边界条件,利用HCh和COMSOL等方法,定量模拟成矿过程中的流体流动、热-质传递、应力变形和化学反应等的时-空变化,是揭示构造-流体耦合成矿机理和定位规律、预测矿化中心和确定找矿目标的有效途径。进而提出了构造控矿理论的研究流程:聚焦构造-流体耦合成矿机制和定位规律这一关键科学问题,选择热液裂隙-脉系统和构造-蚀变-矿化网络为重点研究对象;通过几何学描述、运动学判断、流变学分析、动力学解析和热力学综合,厘定控矿构造格架,定位矿化中心,示踪成矿流体通道和多种矿化样式的增量生长过程及其关键控制,揭示渗透性结构的时-空演变规律及构造再活化与成矿定位的成因关联,建立构造-流体耦合成矿模式,服务新一轮战略找矿突破。以胶东焦家金矿田为例,开展控矿构造理论研究和成矿预测应用实践,证实了其科学性和有效性。