Plasma spray-physical vapor deposition(i.e.,PS-PVD)is a promising method for obtaining advanced environmental barrier coatings(EBCs).The EBCs must meet some requirements in the application,in which the thermal cycle p...Plasma spray-physical vapor deposition(i.e.,PS-PVD)is a promising method for obtaining advanced environmental barrier coatings(EBCs).The EBCs must meet some requirements in the application,in which the thermal cycle performance affects the service lifetime.The preparation of artificial vertical cracks in Yb_(2)SiO_(5) coatings is an effective approach for meeting the requirements above because vertical cracks provide a strain tolerance.To clarify the formation mechanism of vertical cracks during the PSPVD,the effects of coating thickness and substrate temperature on the formation of vertical cracks were investigated.In addition,the interactions of spray powder and plasma flame during coating deposition were also characterized by optical spectroscopy.It is indicated that vertical cracks are formed due to a thermal expansion mismatch between Yb_(2)SiO_(5) and mullite coating,transient cooling after deposition and the nucleation of evaporated Yb_(2)SiO_(5) as well.展开更多
In order to optimize the current grinding procedure of the backup roll of 2050 continuously variable crown (CVC) mills, the behavior of rolling contact fatigue (RCF) cracking was investigated. Two RCF short cracks, in...In order to optimize the current grinding procedure of the backup roll of 2050 continuously variable crown (CVC) mills, the behavior of rolling contact fatigue (RCF) cracking was investigated. Two RCF short cracks, including vertical short crack and ratcheting short crack initiated from ratcheting, were observed. The behavior of both RCF cracks was analyzed in detail. Then a modified grinding procedure was proposed according to the behavior of RCF cracks and the preventive grinding strategy.展开更多
To improve the current grinding procedure of the back-up roll of CVC hot rolling mills so that the back-up roll service life can be extended, the crack initiation and propagation behavior of medium carbon bainitic bac...To improve the current grinding procedure of the back-up roll of CVC hot rolling mills so that the back-up roll service life can be extended, the crack initiation and propagation behavior of medium carbon bainitic back-up roll steel was investigated, a kind of asperity-scale, surface originated vertical short cracks occurred at 5 × 10^2 -1 × 10^4 cycles. Theoretical analysis indicated that the maximum tensile stress occurring at the back edge of the contact of asperities keeps at above 1 347. 97 MPa, and ratcheting and cyclic plastic deformation take place at such sites within 1 × 10^4 cycles. The early initiation of the vertical short cracks is caused by the asperity contact. According to the crack initiation mechanism, short crack behavior and preventive grinding strategy, steel consumption can be reduced considerably by decreasing the surface roughness and removing the asperity influenced surface thin layer at about 70%-80% of the surface distress life.展开更多
基金financial supports from National Natural Science Foundation of China(No.51801034,No.51771059)Guangdong Academy of Sciences Program(No.2020GDASYL-20200104030,No.2018GDASCX-0402,No.2017GDASCX-0202,No.2017GDASCX-0111)+2 种基金Guangdong Technical Research Program(No.2017B090916002,No.2017A070701027,No.2014B07075007)Guangdong Natural Science Foundation(No.2016A030312015,No.2017A030310315)Guangzhou Technical Research Program(No.201906010015,No.201707010455,No.201707010385).
文摘Plasma spray-physical vapor deposition(i.e.,PS-PVD)is a promising method for obtaining advanced environmental barrier coatings(EBCs).The EBCs must meet some requirements in the application,in which the thermal cycle performance affects the service lifetime.The preparation of artificial vertical cracks in Yb_(2)SiO_(5) coatings is an effective approach for meeting the requirements above because vertical cracks provide a strain tolerance.To clarify the formation mechanism of vertical cracks during the PSPVD,the effects of coating thickness and substrate temperature on the formation of vertical cracks were investigated.In addition,the interactions of spray powder and plasma flame during coating deposition were also characterized by optical spectroscopy.It is indicated that vertical cracks are formed due to a thermal expansion mismatch between Yb_(2)SiO_(5) and mullite coating,transient cooling after deposition and the nucleation of evaporated Yb_(2)SiO_(5) as well.
文摘In order to optimize the current grinding procedure of the backup roll of 2050 continuously variable crown (CVC) mills, the behavior of rolling contact fatigue (RCF) cracking was investigated. Two RCF short cracks, including vertical short crack and ratcheting short crack initiated from ratcheting, were observed. The behavior of both RCF cracks was analyzed in detail. Then a modified grinding procedure was proposed according to the behavior of RCF cracks and the preventive grinding strategy.
文摘To improve the current grinding procedure of the back-up roll of CVC hot rolling mills so that the back-up roll service life can be extended, the crack initiation and propagation behavior of medium carbon bainitic back-up roll steel was investigated, a kind of asperity-scale, surface originated vertical short cracks occurred at 5 × 10^2 -1 × 10^4 cycles. Theoretical analysis indicated that the maximum tensile stress occurring at the back edge of the contact of asperities keeps at above 1 347. 97 MPa, and ratcheting and cyclic plastic deformation take place at such sites within 1 × 10^4 cycles. The early initiation of the vertical short cracks is caused by the asperity contact. According to the crack initiation mechanism, short crack behavior and preventive grinding strategy, steel consumption can be reduced considerably by decreasing the surface roughness and removing the asperity influenced surface thin layer at about 70%-80% of the surface distress life.