Lateral rectus muscle recession and the vertical palpebral fissure height: to do or not to do inter-muscular septum dissection?

In this study, we aimed to evaluate changes of vertical palpebral fissure height （VPFH） after unilateral lateral rectus muscle recession. Twenty-five and twenty-six patients who were candidates for lateral rectus muscle recession were assigned into “with” and “without” intermuscular septum dissection study arms. The VPFH was measured at one-day before surgery and in two weeks and three months, postoperatively. Three months after surgery, significant increase of VPFH was observed in both groups （Paired t-test; P=0.005）. Also, less widening of VPFH was observed in “with intermuscular septum dissection” group （Change in VPFH in “with intermuscular septum dissection” vs “without intermuscular septum dissection” groups： 0.48 mm vs 1.34 mm; ANCOVA test; P〈0.001）. However, such results were not observed two weeks post-operatively （Change in VPFH in “with intermuscular septum dissection” vs “without intermuscular septum dissection” groups： -0.28 mm vs 0.28 mm; ANCOVA test; P=0.302）. Intermuscular septum dissection is recommended in lateral rectus muscle recession to partially prevent the undesirable increment of VPFH.

Effect of temperature difference load of 32 m simply supported box beam bridge on track vertical irregularity

In order to study the effect of temperature difference load （TDL） along the vertical direction of a simply supported beam bridge section on the vertical irregularity, a rail-bridge-piers calculation model was established. Taking 32 m simply supported box beam bridge which is widely used in the construction of pas- senger dedicated line in China as an example, influences of the temperature variation between the bottom and top of the bridge, temperature curve index, type of temperature gradient, and beam height on track vertical irregularity were analyzed with the model. The results show that TDL has more effects on long wave track irregularity than on short one, and the wavelength mainly affected is approxi- mately equal to the beam span. The amplitude of irregu- larity caused by TDL is largely affected by the temperature variation, temperature curve index, and type of temperature gradient, so it is necessary to monitor the temperaturedistribution of bridges in different regions to provide accurate calculation parameters. In order to avoid the irregularity exceeding the limit values, the height of 32, 48, and 64 m simply supported box beam bridges must not be less than 2.15, 3.2, and 4.05 m, respectively.

Heat Transfer Characteristics and Pressure Drop in a Horizontal Circulating Fluidized Bed Evaporator

A vapor-liquid-solid horizontal circulating fluidized bed evaporation setup was constructed to study the thermal-exchange properties and pressure change.The influences of the operating variables,including the amount of added particles,heat flux,and circulating flow velocity,were systematically inspected using resistance temperature detectors and pressure sensors.The results showed that the heat transfer eff ect was improved with the increase in the amount of added particles,circulating flow velocity,and particle diameter,but decreased with increasing heat flux.The pressure drop fluctuated with the increase in operating parameters,except circulating flow velocity.The enhancing factor reached up to 71.5%.The enhancing fac-tor initially increased and then decreased with the increase in the amount of added particles and circulating flow velocity,fluctuated with increasing particle diameter,and decreased with increasing heat flux.Phase diagrams showing the variation ranges of the operation variables for the enhancing factor were constructed.

Determination of total sulfur in geothermal water by inductively coupled plasma-atomic emission spectrometry

Sulfur speciation and concentration in geothermal water are of great significance for the research and utilization of the water resources.In most situations,it is necessary to determine the total sulfur in geothermal water.In this study,the method was established for the determination of determining total sulfur content-the inductively coupled plasma-atomic emission spectrometry(ICP-AES),with the wavelength of 182.034 nm selected in spectral line of sulfur.It was identified that the optimal working conditions of the ICP-AES instrument were 1200 W for high frequency generator power 9 mm for vertical observation height,0.30 MPa atomizer pressure,and 50 r/min analytical pump speed.The matrix interference of the method was eliminated by the matrix matching method.Using this method,sulfur detection limit and minimum quantitative detection limit were 0.028 mg/L and 0.110 mg/L,respectively,whilst the linear range was 0.0-100.0 mg/L.The recovery rate of sample was between 90.67%and 108.7%,and the relative standard deviation(RSD)was between 0.36%and 2.14%.The method was used to analyze the actual samples and the results were basically consistent with the industry standard method.With high analysis efficiency,the method has low detection limit and minimum quantitative detection limit,wide linear range,good precision and accuracy,and provides an important detection method for the determination of total sulfur in geothermal water.