Reliability analysis for vertical integration of protection,measurement,merge unit,and intelligent terminal device

The reliability analysis of vertically integrated protection devices is crucial for designing International Electrotechnical Commission(IEC)61850-based substations.This paper presents the hardware architecture of a four-inone vertically integrated device and the information transmission path of each function based on the functional information transmission chain of protection devices,measurement and control devices,merging units,and intelligent terminals.Additionally,a reliability analysis model of the protection device and its protection system is constructed using the fault tree analysis method while considering the characteristics of each module of the vertically integrated device.The stability probability of the protection system in each state is analyzed by combining the state-transfer equations of line and busbar protection with a Markov chain.Finally,the failure rate and availability of the protection device and its protection system are calculated under different ambient temperatures using a 110 kV intelligent substation as an example.The sensitivity of each device module is analyzed.

Firm Size, Innovation and Vertical Integration Incentives： The Case of Food Supply Chain

This study aims to investigate and explore the relationship between vertical integration and the firm＇s innovativeness in food supply chain. For doing so, a two-stage least-squares model was used. It encompassed instrumental variables that attempt to describe the effective determinants of firm＇s vertical integration willingness. Results based on data concerning a set of 130 food-manufacturing firms, highlighted that vertical integration of a firm is strongly affected by internal incentives such as innovation rate and firm size. Moreover, it is simultaneously influenced by the economies of scale and some structure incentives. To conclude, results indicate globally that important and statistically significant differences exist across the studied firms and the small effective ones which acquire a high level of vertical integration.

Long Run Relationships, Vertical Integration and International Competition： Can They Contribute to Explaining Regional Construction Cost Differences？

The existence of opportunistic behavior by contractors or sub-contractors in the bidding process encouraged by the governance structure of construction companies as well as the kind of relationship that exist between contractors and clients is thought to have some bearing on the rising construction cost observed in some regions of Sweden. Three hypotheses that are intended to test the impact that long run relationship between contractors and developers, vertically integrated firms, and the increase of international competition could have on the construction cost increase levels were tested on a predetermined number of projects from six cities in different regions. The semi-structured survey produces inconclusive results. Long run and collaborative relationship was prevalent in small region though respondents in this region did not draw strong connection between construction cost increase levels and the kind of observed relationship. In Stockholm region, short-term relationship was mostly prevalent. Vertical integration and foreign competition impacts on construction costs were not significant in either region.

Vertical Integration by Means of Profinet

This paper discusses some aspects of interdisciplinary problems of industrial automation curriculum in Virumaa College of Tallinn University of Technology at engineering level. The problems being faced by engineers are increasingly interdisciplinary and complicated because the development of new products and processes depends upon the integration of many different technologies. Expansion of possibilities of already existing fieldbus systems is carried out by means of integration them into Profinet （PROcess Field NET） communications. The lab set-model of vertical integration-for data gathering from smart Profibus PA sensor, data transmission, controllers configuration for Profinet IO direct interfacing of distributed field devices on the Ethernet is discussed in this paper.

Vertical Integration and Reverse Engineering of Agricultural Enterprises

This paper studies the potential effects of agricultural enterprise's vertical integration and reverse engineering on downstream firms.Suppliers who invest reverse engineering technology can exploit customer's information. An integrated supplier can obtain at no cost the information from its subsidiary. Based on repeated game and considered corporate " good" or " bad" type,this paper analysis supplier's selection and downstream investment in innovation. The results showed that: when the cost is higher than the threshold value no company invest in reverse engineering,when the cost is lower than the threshold value the integration company invest in reverse engineering; in the second period,vertical integration reduce the downstream independent enterprise's innovation investment and profits,integrated enterprise increase innovation investment and profits; during the first period of the game,the independent downstream firms being " completely foreclosure".

Vertical integration of self-rolled-up microtube and silicon waveguides: a two-channel optical add–drop multiplexer

A novel design of a two-channel optical add-drop multiplexer based on a self-rolled-up microtube （SRM） is presented. This design consists of an SRM that has a parabolic lobe-like pattern along the tube＇s axial direction, as well as straight silicon waveguides and a 180° waveguide bend. The vertical configuration of the SRM and waveguides is analyzed by the coupled mode theory for achieving the optinmm gap. In the critical coupling regime, when the device serves as an optical demultiplexer, the minimum insertion loss is 1.94 dB, and the maximunl channel crosstalk is -6.036 dB. Also, as an optical multiplexer, the maximum crosstalk becomes -11.9 dB.

Studies on the integration of hepatitis B virus DNA sequence in human sperm chromosomes

Aim: To study the integration of hepatitis B virus (HBV) DNA into sperm chromosomes in hepatitis B patients and the features of its integration. Methods: Sperm chromosomes of 14 subjects (5 healthy controls and 9 HB patients, including 1 acute hepatitis B, 2 chronic active hepatitis B, 4 chronic persistent hepatitis B, 2 HBsAg chronic carriers with no clinical symptoms) were prepared using interspecific in vitro fertilization between zona-free hamster oocytes and human spermatozoa. Fluorescence in situ hybridization (FISH) to sperm chromosome spreads was carried out with biotin-labeled full length HBV DNA probe to detect the specific HBV DNA sequences in the sperm chromosomes. Results: Specific fluorescent signal spots for HBV DNA were seen in sperm chromosomes of one patient with chronic persistent hepatitis B. In 9(9/42) sperm chromosome complements containing fluorescent signal spots, one presented 5 obvious FISH spots and the others 2 to 4 signals. The fluorescence intensity showed significant difference among the signal spots. The distribution of signal sites among chromosomes seems to be random. Conclusion: HBV could integrate into human sperm chromosomes. Results suggest that the possibility of vertical transmission of HBV via the germ line to the next generation is present.

A NOVEL CALL ADMISSION CONTROL SCHEME IN CELLULAR/WLAN INTEGRATION AND PERFORMANCE ANALYSIS

In order to achieve the Quality of Service(QoS) provisioning and efficient resource utili-zation in cellular network and Wireless Local Area Network(WLAN) integration,an Integrated Ser-vice-Based Call Admission Control(ISB-CAC) scheme is proposed in this paper.The integrated network is modeled by using multi-dimensional Markov chains.The numerical analysis is presented to evaluate the important performance measures such as the blocking probability of originating calls,the dropping probability,and the average transfer time,etc.The steady-state probabilities of the multi-dimensional Markov chains are obtained by using an iterative approach,and the CAC pa-rameters are optimally designed.The analytical model is validated by the computer simulation.It is shown that compared with the conventional WLAN-First Call Admission Control(WF-CAC) scheme,the proposed ISB-CAC scheme not only provides better QoS for mobile users but also utilizes the bandwidth resources more efficiently.

Activities of Urease and Phosphatase in Integrated Vertical Flow Constructed Wetland and Purification Effect of Black and Malodorous River

[Objective]The activities of urease and phosphatase in integrated vertical flow constructed wetland and purification effect of black and malodorous river were studied.[Method]Honeycomb stone and soft filler were used as matrix,the biological grid integrated vertical flow constructed wetland system was built to strengthen treatment for black and malodorous river,and the activities of urease and phosphatase of two fillers in different functional areas of constructed wetland were tested to study the film formation property of two fillers in different functional areas.[Result]Both urease and phosphatase activities on biofilm of soft filler were significantly higher than on biofilm of honeycomb stone filler;indicating that choosing soft filler was more advantageous to the growth of biofilm;and urease activity had significant correlation with total nitrogen removal rate,while phosphatase activity had no significant correlation with total phosphorus removal rate.[Conclusion]This study provided evidences for utilizing the activities of urease and phosphatase to evaluate the purification effect of black and malodorous river and choose appropriate filler.

An innovative integrated oxidation ditch with vertical circle(IODVC) for wastewater treatment

The oxidation ditch process is economic and efficient for wastewater treatment, but its application is limited in case where land is costly due to its large land area required. An innovative integrated oxidation ditch with vertical circle(IODVC) system was developed to treat domestic and industrial wastewater aiming to save land area. The new system consists of a single channel divided into two ditches(the top one and the bottom one by a plate), a brush, and an innovative integral clarifier. Different from the horizontal circle of the conventional oxidation ditch, the flow of IODVC system recycles from the top zone to the bottom zone in the vertical circle as the brush is running, and then the IODVC saved land area required by about 50% compared with a conventional oxidation ditch with an intrachannel clarifier. The innovative integral clarifier is effective for separation of liquid and solids, and is preferably positioned at the opposite end of the brush in the ditch. It does not affect the hydrodynamic characteristics of the mixed liquor in the ditch, and the sludge can automatically return to the down ditch without any pump. In this study, experiments of domestic and dye wastewater treatment were carried out in bench scale and in full scale, respectively. Results clearly showed that the IODVC efficiently removed pollutants in the wastewaters, i.e., the average of COD removals for domestic and dye wastewater treatment were 95% and 90%, respectively, and that the IODVC process may provide a cost effective way for full scale dye wastewater treatment.

Dynamic interaction of twin vertically overlapping lined tunnels in an elastic half space subjected to incident plane waves

The scattering of plane harmonic P and SV waves by a pair of vertically overlapping lined tunnels buried in an elastic half space is solved using a semi-analytic indirect boundary integration equation method. Then the effect of the distance between the two tunnels, the stiffness and density of the lining material, and the incident frequency on the seismic response of the tunnels is investigated. Numerical results demonstrate that the dynamic interaction between the twin tunnels cannot be ignored and the lower tunnel has a significant shielding effect on the upper tunnel for high-frequency incident waves, resulting in great decrease of the dynamic hoop stress in the upper tunnel; for the low-frequency incident waves, in contrast, the lower tunnel can lead to amplification effect on the upper tunnel. It also reveals that the frequency-spectrum characteristics of dynamic stress of the lower tunnel are significantly different from those of the upper tunnel. In addition, for incident P waves in low-frequency region, the soft lining tunnels have significant amplification effect on the surface displacement amplitude, which is slightly larger than that of the corresponding single tunnel.

Enhanced biological nutrients removal using an integrated oxidation ditch with vertical circle from wastewater by adding an anaerobic column

Compared to conventional oxidation ditches, an integrated oxidation ditch with vertical circle （IODVC） has the characters of concise configuration, simple operation and maintenance, land saving and automatical sludge returning. By the utilization of vertical circulation, an aerobic zone and an anoxic zone can be unaffectedly formed in the IODVC. Therefore, COD and nitrogen can be efficiently removed. However, the removal efficiency of phosphorus was low in the IODVC. In the experiment described, a laboratory scale system to add an anaerobic column to the IODVC has been tested to investigate the removal of phosphorus from wastewater. The experimental results showed that the removal efficiency of TP with the anaerobic column was increased to 54.0% from 22.3% without the anaerobic column. After the acetic sodium was added into the influent as carbon sources, the mean TP removal efficency of 77. 5 % was obtained. At the same time, the mean removal efficiencies of COD, TN and NH3-N were 92.2%, 81.6% and 98.1%, respectively, at 12 h of HRT and 21-25 d of SRT. The optimal operational conditions in this study were as follows： recycle rate = 1.5-2.0, COD/TN 〉 6, COD/TP 〉 40, COD loading rate = 0.26-0.32 kgCOD/（kgSS· d）, TN loading rate = 0. 028-0. 034 kgTN/（ kgSS·d） and TP loading rate = 0.003-0.005 kgTP/（kgSS· d）, respectively.

Vertically Integrated Electronics: New Opportunities from Emerging Materials and Devices

Vertical three-dimensional(3D)integration is a highly attractive strategy to integrate a large number of transistor devices per unit area.This approach has emerged to accommodate the higher demand of data processing capability and to circumvent the scaling limitation.A huge number of research efforts have been attempted to demonstrate vertically stacked electronics in the last two decades.In this review,we revisit materials and devices for the vertically integrated electronics with an emphasis on the emerging semiconductor materials that can be processable by bottom-up fabrication methods,which are suitable for future flexible and wearable electronics.The vertically stacked integrated circuits are reviewed based on the semiconductor materials:organic semiconductors,carbon nanotubes,metal oxide semiconductors,and atomically thin two-dimensional materials including transi-tion metal dichalcogenides.The features,device performance,and fabrication methods for 3D integration of the transistor based on each semiconductor are discussed.Moreover,we highlight recent advances that can be important milestones in the vertically integrated elec-tronics including advanced integrated circuits,sensors,and display systems.There are remaining challenges to overcome;however,we believe that the vertical 3D integration based on emerging semiconductor materials and devices can be a promising strategy for future electronics.

High efficiency,small size,and large bandwidth vertical interlayer waveguide coupler

Since the advent of three-dimensional photonic integrated circuits,the realization of efficient and compact optical interconnection between layers has become an important development direction.A vertical interlayer coupler between two silicon layers is presented in this paper.The coupling principle of the directional coupler is analyzed,and the traditional method of using a pair of vertically overlapping inverse taper structures is improved.For the coupling of two rectangular waveguide layers,a pair of nonlinear tapers with offset along the transmission direction is demonstrated.For the coupling of two ridge waveguide layers,a nonlinear taper in each layer is used to achieve high coupling efficiency.The simulation results show that the coupling efficiency of the two structures can reach more than 90%in a wavelength range from 1500 nm to 1650 nm.Moreover,the crosstalk is reduced to less than-50 d B by using multimode waveguides at intersections.The vertical interlayer coupler with a nonlinear taper is expected to realize the miniaturization and dense integration of photonic integrated chips.

Application of vertically integrated sampling approach to study of new production via ^(234)Th -^(238)U disequilibria

The spatial and temporal distributions of new production vary largely in different sea areas. To understand the level of new production in the sea area studied better, an estimate of new production must be obtained in large spatial and temporal scales. The ~234Th/ ~238U disequilibrium is an effective method for the study of new production. Two sampling strategies, vertically integrated sampling ap proach based on trapezoidal integration principle and discrete layer sampling approach, were compared in the studies of the xiamen Bay and the northern South China Sea. The scavenging fluxes and removal fluxes of ~234Th and the residence times for dissolved and particulate ~234Th were calculated. The coinci dent results from two Sampling approach suggest that vertically integrated sampling approach is not only effective and reliable, but also significantly reduces the number and volume of samples. It allows us to study new production by ba ^(234)Th - ^(238)U disequilibria in large spatial scale.

A nonlinear model for aerodynamic configuration of wake behind horizontal-axis wind turbine

Determination of the aerodynamic configuration of wake is the key to analysis and evaluation of the rotor aerodynamic characteristics of a horizontal-axis wind turbine. According to the aerodynamic configuration, the real magnitude and direction of the onflow velocity at the rotor blade can be determined, and subsequently, the aerodynamic force on the rotor can be determined. The commonly employed wake aerodynamic models are of the cylindrical form instead of the actual expanding one. This is because the influence of the radial component of the induced velocity on the wake configuration is neglected. Therefore, this model should be called a "linear model". Using this model means that the induced velocities at the rotor blades and aerodynamic loads on them would be inexact. An approximately accurate approach is proposed in this paper to determine the so-called "nonlinear" wake aerodynamic configuration by means of the potential theory, where the influence of all three coordinate components of the induced velocity on wake aerodynamic configuration is taken into account to obtain a kind of expanding wake that approximately looks like an actual one. First, the rotor aerodynamic model composed of axial (central), bound, and trailing vortexes is established with the help of the finite aspect wing theory. Then, the Biot-Savart formula for the potential flow theory is used to derive a set of integral equations to evaluate the three components of the induced velocity at any point within the wake. The numerical solution to the integral equations is found, and the loci of all elementary trailing vortex filaments behind the rotor are determined thereafter. Finally, to formulate an actual wind turbine rotor, using the nonlinear wake model, the induced velocity everywhere in the wake, especially that at the rotor blade, is obtained in the case of various tip speed ratios and compared with the wake boundary in a neutral atmospheric boundary layer. Hereby, some useful and referential conclusions are offered for the aerodynamic computation and design of the rotor of the horizontal-axis wind turbine.

Effects of Cd^(2+) and Pb^(2+) on the substrate biofilms in the integrated vertical-flow constructed wetland

The effects of single Cd^(2+)and Pb^(2+),and combined Cd^(2+)and Pb^(2+)on dehydrogenase activity and polysaccharide content of the substrate biofilms in the integrated vertical-flow constructed wetland(IVCW)were studied.Dehydrogenase activities decreased linearly with the increasing concentrations of Cd^(2+)and Pb^(2+)at different times(6,24,72,and 120 h).The activities at both 6 and 24 h were significantly higher than that at 72 and 120 h in the case of single and combined treatments.The single Cd^(2+)and...

Scattering of Oblique Surface Water Waves by Thin Vertical Barrier Over Undulating Bed Topography

The present study deals with the scattering of oblique surface water waves by small undulation on the bottom in the presence of a thin vertical barrier. Here, three different configurations of vertical barriers are investigated. Perturbation analysis is employed to determine the physical quantities, namely, the reflection and transmission coefficients. In this analysis, many different Boundary Value Problems (BVPs) are obtained out of which the first two bvps are considered. The zeroth order bvp is solved with the aid of eigenfunction expansion method. The first order reflection and transmission coefficients are derived in terms of the integrals by the method of the Green's integral theorem. The variation of these coefficients is plotted and analyzed for different physical parameters. Furthermore, the energy balance relation, an important relation in the study of water wave scattering, is derived and checked for assuring the correctness of the numerical results for the present problem.

Vertical vibrations of elastic foundation resting on saturated half-space

This paper is mainly concerned with the dynamic response of an elastic foundation of finite height bounded to the surface of a saturated half-space. The foundation is subjected to time-harmonic vertical loadings. First, the transform solutions for the governing equations of the saturated media are obtained. Then, based on the assumption that the contact between the foundation and the half-space is fully relaxed and the halfspace is completely pervious or impervious, this dynamic mixed boundary-value problem can lead to dual integral equations, which can be further reduced to the Predhohn integral equations of the second kind and solved by numerical procedures. In the numerical extortples, the dynamic colnpliances, displacements and pore pressure are developed for a wide range of frequencies and material/geometrical properties of the saturated soil-foundation system. In most of the cases, the dynamic behavior of an elastic foundation resting on the saturated media significantly differs from that of a rigid disc on the saturated half-space. The solutions obtained can be used to study a variety of wave propagation problems and dynamic soil-structure interactions.

VERTICAL ANTENNA EMBEDDED IN EARTH WITH CONDUCTIVE COATING

A vertical antenna embedded in earth with conductive coating has been investi-gated by employing the method of integral equation.This topic is available to EM-MWD(Elec-tromagnetic Measurement-While-Drilling)system,which is a new real time system for drillingmeasurement.Under the condition that the wave number of the earth is much larger than that ofthe air,a current integral equation has been derived.After the current distribution having beendetermined,the electric field strength on the earth surface has been predicted and its dependenceson the operating frequency and the depth of the well have been discussed as well.