Tunable frequency selective surface with a shorted ring slot

In order to realize the tunable performance of a frequency selective surface （FSS）, a new unit cell is designed in this paper by properly adding two metal shorts to the ring slot. Based on the spectral-domain method, the frequency responses of the FSS structure with two shorts per slot ring are analysed for both the horizontal and the vertical polarizations at the normal incidence. It is demonstrated that the presence of the metal shorts does not affect the resonant frequency of the horizontally polarized wave but doubles the resonant frequency of the vertically polarized wave. Therefore based on the analysis of the novel transmission properties, a new approach to adjusting the resonant frequency by rotating the FSS screen 90° is presented in this paper.

Spin Hall effect of a light beam in anisotropic metamaterials

We theoretically investigate a switchable spin Hall effect of light （SHEL） in reflection for three specific dispersion relations at an air-anisotropic metamaterial interface. The displacements of horizontal and vertical polarization compo- nents vary with the incident angle at different dispersion relations. The transverse displacements can be obtained with the relevant metamaterial whose refractive index can be arbitrarily tailed. The results of the SHEL in the metamaterial provide a new way for manipulating the transverse displacements of a specific polarization component.

Low profile cavity-embedded ultra-wideband UHF array antenna with end-fire beams

A low-profile,vertically polarized,ultra-wideband array antenna with end-fire beams operating in an ultra-high frequency(UHF)band is developed in this paper.The array antenna consists of 1×16 log-periodic top-hat loaded monopole antenna arrays and is feasible to embed into a shallow cavity to further reduce the array height.Capacitance is introduced in the proposed antenna element to reduce profile height and the rectangular top hats are carefully designed to minimize the transverse dimension.Simulated results show that when the antenna array operates in a frequency range of 300 MHz-900 MHz,the end-fire radiation pattern achieves±45°scanning range in the horizontal plane.Then prototypes of the proposed end-fire antenna element and a uniformly spaced linear array(1×2)are fabricated and validated.The end-fire antenna array should be suitable for airborne applications where low-profile and conformal scanning phased antenna arrays with end-fire radiations are required.This design is attractive for airborne platform applications that are used to search,discover,identify,and scout the aerial target with vertically polarized beams.

Influence of aircraft surface distribution on electromagnetic scattering characteristics

In this paper,two typical stealth aircraft concepts（wing fuselage blended and flyingwing） were designed.Then three gradually changed surface distribution models with the same planform for each concept were created.Based on the multilevel fast multipole algorithm（MLFMA）,the vertical polarization transmitting/vertical polarization receiving（VV） and horizontal polarization transmitting/horizontal polarization receiving（HH） radar cross section（RCS） characteristics were simulated with five frequencies between 0.1 and 1.0 GHz.The influences and mechanisms of aircraft surface distribution on electromagnetic scattering characteristics were investigated.The results show that for the wing fuselage blended concept,the W RCS of this frequency range is higher than the HH RCS in most cases,while it is just the opposite for the flying-wing concept.As for the two aircraft concepts,the RCS levels of HH and W both decrease with the frequency increasing,but the HH RCS has a faster downward trend.The surface distribution has little influence on HH RCS characteristics.On the contrary,it has a significant impact on W RCS characteristics,and the amplitude of the VV RCS increases with the surface thickness.

Design and studies on the traveling wave transverse RF deflecting structure

With the development of free electron laser （FEL） and the international linear collider （ILC）, the electron bunch length is getting smaller and smaller, The traveling-wave transverse RF deflecting structure is an important part of the RF deflecting method for bunch length measurement and phase space diagnostics. The operation mode in RF deflector is the ＂TM11-like＂ mode. Since the TM11-like mode in this structure has a pair of degenerate dipole modes, two additional holes are provided on either side of each iris to stabilize the mode. The simulation and optimization have been done. A prototype has been fabricated and tested. The cold test results have been compared with the simulations of the first three modes.