期刊文献+
共找到566篇文章
< 1 2 29 >
每页显示 20 50 100
Fast-transient techniques for high-frequency DC–DC converters 被引量:1
1
作者 Lin Cheng Kui Tang +1 位作者 Wang-Hung Ki Feng Su 《Journal of Semiconductors》 EI CAS CSCD 2020年第11期92-102,共11页
A 30 MHz voltage-mode controlled buck converter with fast transient responses is presented.An improved differential difference amplifier(DDA)-based Type-III compensator is proposed to reduce the settling times of the ... A 30 MHz voltage-mode controlled buck converter with fast transient responses is presented.An improved differential difference amplifier(DDA)-based Type-III compensator is proposed to reduce the settling times of the converter during load transients,and to achieve near-optimal transient responses with simple PWM control only.Moreover,a hybrid scheme using a digital linear regulator with automatic transient detection and seamless loop transition is proposed to further improve the transient responses.By monitoring the output voltage of the compensator instead of the output voltage of the converter,the proposed hybrid scheme can reduce undershoot and overshoot effectively with good noise immunity and without interrupting the PWM loop.The converter was fabricated in a 0.13μm standard CMOS process using 3.3 V devices.With an input voltage of 3.3 V,the measured peak efficiencies at the output voltages of 2.4,1.8,and 1.2 V are 90.7%,88%,and 83.6%,respectively.With a load step of 1.25 A and rise and fall times of 2 ns,the measured 1%settling times were 220 and 230 ns,with undershoot and overshoot with PWM control of 72 and 76 mV,respectively.They were further reduced to 36 and 38 mV by using the proposed hybrid scheme,and 1%settling times were also reduced to 125 ns. 展开更多
关键词 differential difference amplifier(DDA) Type-III compensator fast transient responses hybrid scheme high switching frequency overshoot/undershoot
下载PDF
Calculation of all-time apparent resistivity of large loop transient electromagnetic method with very fast simulated annealing 被引量:4
2
作者 李建慧 朱自强 +2 位作者 冯德山 肖建平 彭凌星 《Journal of Central South University》 SCIE EI CAS 2011年第4期1235-1239,共5页
In large loop transient electromagnetic method(TEM),the late time apparent resistivity formula cannot truly reflect the geoelectric model,thus it needs to define the all-time apparent resistivity with the position inf... In large loop transient electromagnetic method(TEM),the late time apparent resistivity formula cannot truly reflect the geoelectric model,thus it needs to define the all-time apparent resistivity with the position information of measuring point.Utilizing very fast simulated annealing(VFSA) to fit the theoretical electromagnetic force(EMF) and measured EMF could obtain the all-time apparent resistivity of the measuring points in rectangular transmitting loop.The selective cope of initial model of VFSA could be confirmed by taking the late time apparent resistivity of transient electromagnetic method as the prior information.For verifying the correctness,the all-time apparent resistivities of the geoelectric models were calculated by VFSA and dichotomy,respectively.The results indicate that the relative differences of apparent resistivities calculated by these two methods are within 3%.The change of measuring point position has little influence on the tracing pattern of all-time apparent resistivity.The first branch of the curve of all-time apparent resistivity is close to the resistivity of the first layer medium and the last branch is close to the resistivity of the last layer medium,which proves the correctness of the arithmetics proposed. 展开更多
关键词 视电阻率曲线 快速模拟退火 瞬变电磁法 大循环 时间 计算 地电模型 位置信息
下载PDF
Analysis on conducted coupling of electrical fast transient burst in mines 被引量:1
3
作者 FENG De-wang LAN Jian-rong 《Journal of Coal Science & Engineering(China)》 2012年第2期207-212,共6页
关键词 电快速瞬变脉冲群 耦合分析 电压极性 地雷 干扰形式 上升时间 负载电阻 电磁场理论
下载PDF
Thermal conductivity characterization of ultra-thin silicon film using the ultra-fast transient hot strip method
4
作者 张燕燕 程然 +3 位作者 倪东 田明 卢继武 赵毅 《Chinese Physics B》 SCIE EI CAS CSCD 2019年第7期499-503,共5页
Thermal conductivity is an important material parameter of silicon when studying the performance and reliability of devices or for guiding circuit design when considering heat dissipation, especially when the self-hea... Thermal conductivity is an important material parameter of silicon when studying the performance and reliability of devices or for guiding circuit design when considering heat dissipation, especially when the self-heating effect becomes prominent in ultra-scaled MOSFETs.The cross-plane thermal conductivity of a thin silicon film is lacking due to the difficulty in sensing high thermal conductivity in the vertical direction.In this paper, a feasible method that utilizes an ultra-fast electrical pulse within 20 μs combined with the hot strip technique is adopted.To the best of our knowledge, this is the first work that shows how to extract the cross-plane thermal conductivity of sub-50 nm(30 nm, 17 nm, and 10 nm)silicon films on buried oxide.The ratio of the extracted cross-plane thermal conductivity of the silicon films over the bulk value is only about 6.9%, 4.3%, and 3.8% at 300 K, respectively.As the thickness of the films is smaller than the phonon mean free path, the classical heat transport theory fails to predict the heat dissipation in nanoscale transistors.Thus, in this study, a ballistic model, derived from the heat transport equation based on extended-irreversible-hydrodynamics(EIT), is used for further investigation, and the simulation results exhibit good consistence with the experimental data.The extracted effective thermal data could provide a good reference for precise device simulations and thermoelectric applications. 展开更多
关键词 cross-plane thermal CONDUCTIVITY ultra-fast transient hot STRIP METHOD
下载PDF
基于子循环自适应串行交错时间匹配算法的油浸式变压器绕组瞬态温升计算
5
作者 刘刚 郝世缘 +2 位作者 胡万君 刘云鹏 李琳 《电工技术学报》 EI CSCD 北大核心 2024年第4期1185-1197,共13页
针对传统算法存在的步长调整及耦合点选择问题,该文提出基于子循环自适应串行交错(SCAS)的时间匹配算法。首先,在步长调整方面,通过加入自适应(ATS)-启发式(HTS)混合变步长算法,解决步长无法实时调整的问题;然后,针对耦合点选择问题,该... 针对传统算法存在的步长调整及耦合点选择问题,该文提出基于子循环自适应串行交错(SCAS)的时间匹配算法。首先,在步长调整方面,通过加入自适应(ATS)-启发式(HTS)混合变步长算法,解决步长无法实时调整的问题;然后,针对耦合点选择问题,该文在传统常规串行交错(CSS)时间匹配算法及现有改进方案子循环常规串行交错(SCSS)的基础上,提出SCAS时间匹配算法,采用自适应方案确定计算时间窗及预定耦合点,并引入指数平滑法对其精度进行保证;最后,该文基于110 kV油浸式电力变压器建立二维瞬态单分区分匝绕组模型,并将所提算法与其他传统方法进行对比分析。结果表明:在精度方面,与传统CSS算法相比SCAS算法的流场及温度场最大平均相对误差均不超过0.45%,在可接受误差范围内;在效率方面,SCAS算法总体计算效率较CSS算法提高了近20倍。同时,为了说明所提算法的工程价值,该文搭建基于110 kV变压器绕组模型的温升实验平台,将SCAS时间匹配算法应用于该模型中,实验结果表明:在精度方面,SCAS算法与实验达到稳态时最大绝对误差为2.7 K;在计算效率上,本文所提算法的计算效率较传统算法提升约46倍,计算步数约为传统的1/47,减少了计算冗余。 展开更多
关键词 子循环自适应串行交错 混合变步长 二维瞬态流热耦合问题 快速计算方法 温升实验
下载PDF
Mayr电弧模型下GIS中快速暂态过电压的仿真分析
6
作者 杨帆 高有华 《电器与能效管理技术》 2024年第2期28-32,38,共6页
SF6气体绝缘封闭组合开关(GIS)中隔离开关进行分合母线时,产生快速暂态过电压(VFTO),幅值高且上升速率极快,威胁GIS及相邻设备的绝缘。选取某800 kV GIS隔离开关分合母线的试验电路为研究对象,采用电磁暂态程序(EMTP/ATP)进行建模仿真,... SF6气体绝缘封闭组合开关(GIS)中隔离开关进行分合母线时,产生快速暂态过电压(VFTO),幅值高且上升速率极快,威胁GIS及相邻设备的绝缘。选取某800 kV GIS隔离开关分合母线的试验电路为研究对象,采用电磁暂态程序(EMTP/ATP)进行建模仿真,隔离开关燃弧时采用Mayr电弧模型,分析其对VFTO的影响,得出考虑Mayr电弧模型时操作隔离开关、断路器侧隔离开关及变压器侧隔离开关的电压波形,并与考虑时变电阻模型的VFTO进行对比。对VFTO波形进行离散傅里叶分析,得到过电压频率、幅值的变化特征,研究结果为GIS绝缘设计提供参考。 展开更多
关键词 SF6气体绝缘封闭组合电器(GIS) 快速暂态过电压(VFTO) Mayr电弧模型 傅里叶分析
下载PDF
电快速瞬变脉冲群串扰耦合分析及防护措施研究
7
作者 马海杰 孙光辉 《自动化应用》 2024年第4期134-138,共5页
EFT产生的瞬态脉冲干扰可通过电缆耦合进入电子系统的内部,损伤电子设备。为降低瞬态脉冲对电缆串扰耦合的影响,首先利用电磁仿真软件CST建立平行电缆耦合仿真模型,当电压等级为4 kV时,测试电缆的近端串扰电压达到71.2 V,远高于部分敏... EFT产生的瞬态脉冲干扰可通过电缆耦合进入电子系统的内部,损伤电子设备。为降低瞬态脉冲对电缆串扰耦合的影响,首先利用电磁仿真软件CST建立平行电缆耦合仿真模型,当电压等级为4 kV时,测试电缆的近端串扰电压达到71.2 V,远高于部分敏感器件的阈值;然后通过分析电快速瞬变脉冲群的频谱特性,瞬态脉冲的干扰能量主要集中在1~10 MHz的范围内;最后利用仿真软件Filter Solution设计合理的防护电路。结果表明,防护电路能有效降低瞬态脉冲对电路的影响。 展开更多
关键词 电快速瞬变脉冲群 电缆耦合 防护电路 串扰 频谱
下载PDF
巨型射电望远镜(FAST)反射面支承结构日照温度场效应分析 被引量:22
8
作者 金晓飞 范峰 沈世钊 《土木工程学报》 EI CSCD 北大核心 2008年第11期71-77,共7页
研究分析500m口径球冠状巨型射电望远镜(Five-hundred-meter Aperture Spherical Telescope,简称FAST)反射面支承结构的日照温度场效应。借助ANSYS热分析模块,建立FAST反射面结构和实测周边地形的整体参数化有限元模型,计算最不利气候... 研究分析500m口径球冠状巨型射电望远镜(Five-hundred-meter Aperture Spherical Telescope,简称FAST)反射面支承结构的日照温度场效应。借助ANSYS热分析模块,建立FAST反射面结构和实测周边地形的整体参数化有限元模型,计算最不利气候之一即夏季晴天无云天气各时刻的空气对流换热、太阳辐射、周围环境的长波辐射换热以及阴影遮挡等各种边界条件,在较为合理的结构初始温度场下,进行连续多天的时程分析,直至结构的任一点温度收敛于24h前的结果,并据此结果计算反射面结构温度变形和温度应力,给出日照下反射面形状拟合精度随时间的变化规律、结构应力的变化范围和分布规律。结果表明在日照下结构的温度场较不均匀,局部温差最高达到了11℃,较大地影响了反射面形状精度,为将来结构的设计、施工、监测以及控制提供了参考信息。 展开更多
关键词 fast 日照温度场 时程分析 温度变形 温度应力
下载PDF
一种基于冲激响应的瞬态噪声近似预报方法
9
作者 张逸豪 王斌 +1 位作者 范军 王文欢 《舰船科学技术》 北大核心 2024年第7期57-64,共8页
为了提高水下结构瞬态噪声的计算效率和准确性,提出一种基于冲激响应的瞬态噪声近似预报方法。该方法适用于已知结构表面法向振速时的瞬态辐射噪声预报,它通过时域快速算法求解与辐射问题相互易的脉冲点源散射问题获取结构表面各单元的... 为了提高水下结构瞬态噪声的计算效率和准确性,提出一种基于冲激响应的瞬态噪声近似预报方法。该方法适用于已知结构表面法向振速时的瞬态辐射噪声预报,它通过时域快速算法求解与辐射问题相互易的脉冲点源散射问题获取结构表面各单元的冲激响应,再将各冲激响应与该处相应的法向振速信号作卷积,最后以单元面积为权重对卷积结果进行加权求和便可计算出最终的瞬态噪声场。利用2种典型的解析模型,通过与时域解析解的对比验证了该方法的正确性。针对镶嵌于圆形障板的管阵列结构,利用该近似预报方法对已确定法向振速边界条件下的瞬态辐射噪声进行计算,并结合该模型几何结构分析了考察场点处辐射噪声信号的时间特征及声能量空间指向性。 展开更多
关键词 瞬态噪声 冲激响应 互易性 时域快速算法 卷积
下载PDF
一种应用于探测的可预测电流模式FSBB电路
10
作者 李智铮 黄宇超 +3 位作者 童乔凌 闵闫 李启东 马力君 《电源技术》 CAS 北大核心 2024年第3期494-499,共6页
探测器的能源供给离不开DC-DC变换器,先进的控制方法能提高工作效率。预测电流模式控制相比于传统的PI控制具有动态响应快、易于进行过流保护等优点,因此被广泛应用到电力电子控制领域。由于控制回路的问题,不能通过计算开环增益的方式... 探测器的能源供给离不开DC-DC变换器,先进的控制方法能提高工作效率。预测电流模式控制相比于传统的PI控制具有动态响应快、易于进行过流保护等优点,因此被广泛应用到电力电子控制领域。由于控制回路的问题,不能通过计算开环增益的方式对负载波动与输出电压变化的闭环传递函数进行有效地设计。因此,提出了一种在不加前馈控制的情况下,基于预测电流模式控制四开关Buck-Boost(four-switch Buck-Boost,FSBB)变换器补偿器的设计方案,该方法能提升负载动态响应,通过实验数据,证明了该方法的有效性。 展开更多
关键词 预测电流模式控制 FSBB 快速负载响应
下载PDF
An NMOS output-capacitorless low-dropout regulator with dynamic-strength event-driven charge pump
11
作者 Yiling Xie Baochuang Wang +1 位作者 Dihu Chen Jianping Guo 《Journal of Semiconductors》 EI CAS CSCD 2024年第6期23-34,共12页
In this paper,an NMOS output-capacitorless low-dropout regulator(OCL-LDO)featuring dual-loop regulation has been proposed,achieving fast transient response with low power consumption.An event-driven charge pump(CP)loo... In this paper,an NMOS output-capacitorless low-dropout regulator(OCL-LDO)featuring dual-loop regulation has been proposed,achieving fast transient response with low power consumption.An event-driven charge pump(CP)loop with the dynamic strength control(DSC),is proposed in this paper,which overcomes trade-offs inherent in conventional structures.The presented design addresses and resolves the large signal stability issue,which has been previously overlooked in the event-driven charge pump structure.This breakthrough allows for the full exploitation of the charge-pump structure's poten-tial,particularly in enhancing transient recovery.Moreover,a dynamic error amplifier is utilized to attain precise regulation of the steady-state output voltage,leading to favorable static characteristics.A prototype chip has been fabricated in 65 nm CMOS technology.The measurement results show that the proposed OCL-LDO achieves a 410 nA low quiescent current(IQ)and can recover within 30 ns under 200 mA/10 ns loading change. 展开更多
关键词 output-capacitorless low-dropout regulator fast transient low quiescent current event-driven charge pump
下载PDF
基于自适应偏置的无片外电容LDO设计
12
作者 谢雷婧 张家豪 《电子元件与材料》 CAS 北大核心 2024年第4期468-473,共6页
提出了一种无片外电容低压差线性稳压器(LDO),该稳压器采用有源频率补偿(AFC)电路和自适应偏置电路在宽负载范围内实现快速瞬态响应。有源频率补偿(AFC)电路采用双环路微分器结构,不仅有效减小了片上补偿电容的面积,而且提高了整体电路... 提出了一种无片外电容低压差线性稳压器(LDO),该稳压器采用有源频率补偿(AFC)电路和自适应偏置电路在宽负载范围内实现快速瞬态响应。有源频率补偿(AFC)电路采用双环路微分器结构,不仅有效减小了片上补偿电容的面积,而且提高了整体电路的瞬态响应。采用源极跟随器结构实现的自适应偏置电路用于有源频率补偿电路的偏置,进一步改善了LDO的瞬态响应。电路采用SMIC 0.18μm标准CMOS工艺制造,有效芯片面积为0.038 mm^(2)。仿真结果表明,在200 mV压差下,最大输出电流为150 mA,最大负载电容为100 pF。在边沿时间为100 ns的最大负载电流变化时,过冲和下冲电压分别为185 mV和405 mV,电路恢复时间分别为0.45μs和0.2μs。 展开更多
关键词 无片外电容 有源频率补偿 源随器 自适应偏置 快速瞬态响应
下载PDF
铅冷微堆SMILE典型无保护瞬态热工安全分析
13
作者 柳春源 肖骏 +2 位作者 陈笑松 孙培栋 邢勉 《原子能科学技术》 EI CAS CSCD 北大核心 2024年第4期814-824,共11页
核能系统小型化是核能未来发展的重要方向,其中小型铅冷快堆是技术路线之一。在小型铅冷快堆研发过程中,瞬态工况下热工水力安全特性是重要的研究内容之一,这不仅是对反应堆安全特性的重要验证,也对反应堆系统的后续设计完善具有重要参... 核能系统小型化是核能未来发展的重要方向,其中小型铅冷快堆是技术路线之一。在小型铅冷快堆研发过程中,瞬态工况下热工水力安全特性是重要的研究内容之一,这不仅是对反应堆安全特性的重要验证,也对反应堆系统的后续设计完善具有重要参考价值。兆瓦级铅冷快堆SMILE是国家电投集团科学技术研究院有限公司提出的高安全、紧凑型铅冷快堆方案。为研究SMILE的安全特性,使用系统分析程序ATHLET对其进行典型无保护瞬态热工水力性能分析。结果表明,SMILE在应对典型无保护瞬态事故时具备良好的固有安全特性。 展开更多
关键词 铅冷微堆 系统分析程序 瞬态热工安全分析
下载PDF
拓扑参数多变场景下的暂态电压安全域快速计算
14
作者 慕腾 刘石川 +3 位作者 杨志国 郭裕 张爱军 刘紫玉 《电力系统及其自动化学报》 CSCD 北大核心 2024年第1期126-131,共6页
作为安全域体系中的重要组成部分,电力系统暂态电压安全域的边界会随系统运行方式和拓扑参数的变化而改变。为实现更加准确的安全域边界表征,本文充分考虑负荷的动态变化,提出一种安全域边界快速计算方法。首先,给出保证电力系统暂态电... 作为安全域体系中的重要组成部分,电力系统暂态电压安全域的边界会随系统运行方式和拓扑参数的变化而改变。为实现更加准确的安全域边界表征,本文充分考虑负荷的动态变化,提出一种安全域边界快速计算方法。首先,给出保证电力系统暂态电压不失稳的安全运行区域描述及其边界表征形式,构建仿真训练集并研究暂态电压安全域的边界变化特性;然后,基于安全域边界的二次拟合表征形式,采用轻梯度决策树机器学习框架实现电力系统暂态电压安全域的快速修正;最后,在IEEE标准算例系统中验证了本文方法的有效性和适用性。 展开更多
关键词 暂态电压安全域 拓扑参数 快速计算 机器学习 轻梯度决策树
下载PDF
一种宽输入瞬态增强LDO设计
15
作者 汪西虎 康敏安 +2 位作者 郭仲杰 杨靳 郭世骁 《西安邮电大学学报》 2024年第1期41-52,共12页
当应用于恶劣的电子电路环境中时,汽车电子中电源管理类芯片可能发生瞬态高压和线路的动态变化。为了拓宽输入范围和改善瞬态响应性能,提出了一种宽输入瞬态增强低压差线性稳压器(Low Dropout Regulator, LDO)设计。采用预稳压电路将输... 当应用于恶劣的电子电路环境中时,汽车电子中电源管理类芯片可能发生瞬态高压和线路的动态变化。为了拓宽输入范围和改善瞬态响应性能,提出了一种宽输入瞬态增强低压差线性稳压器(Low Dropout Regulator, LDO)设计。采用预稳压电路将输入高电压转化为低压电源,为电路内部模块供电来实现宽输入。主环路使用双调整管设计方式,通过添加快速响应通路的方式加快环路对输出电压变化的响应速度,结合快速放电电路以实现快速瞬态响应。应用米勒调零补偿和零点补偿方法以保证不同带载条件下环路的稳定性。仿真结果表明,设计LDO电路输入电压的范围为3~40 V,预稳压电路可以将输入的高电压降压至2.8 V;LDO输出电压典型值为5 V,最大可带载150 mA;当负载电流发生150 mA的跳变时,输出的上冲电压和下冲电压分别为40.32 mV和55.77 mV。与已有的相关设计相比,所提设计实现了较宽的输入范围,同时具有较好的瞬态响应性能。 展开更多
关键词 低压差线性稳压器 汽车电子 宽输入范围 快速瞬态响应 米勒调零补偿 零点补偿
下载PDF
Influence of Series Choke on Damping of Switching Transients in Distribution Transformers 被引量:3
16
作者 Marek Florkowski Marek Fulczyk +3 位作者 Wojcicch Piasecki Magdalena Ostrogorksa Pawet Klyrs Jakub Furgat 《高电压技术》 EI CAS CSCD 北大核心 2013年第10期2492-2499,共8页
Distribution transformers operating in modern system grids or in industrial networks are subjected to many switching transients,which may occur due to routine operations,network reconfigurations or as reaction on prot... Distribution transformers operating in modern system grids or in industrial networks are subjected to many switching transients,which may occur due to routine operations,network reconfigurations or as reaction on protection signals.Depending on the network configuration and parameters,such events may lead to external overvoltages and result in additional stresses on the insulation system.This paper presents the influence of a series choke on damping of switching transients in distribution transformers.The impact of the choke is assessed by both amplitude and rise time reduction.The suppression of the transient rise time is shown for a test configuration involving distribution transformers connected to low loss cable lines and a medium voltage breaker.Such phenomena are especially typical for industrial networks where switching operations are very frequent.Both simulation and experiment results are given.Simulation results as well as measurement results confirmed that switching events can lead to high dU/dt and in consequence,can have adverse impacts on insulation system.Voltage escalation during switching event is strongly related with system conditions.The results obtained for presented mitigation method are promising and indicate significant dU/dt reduction as well as number of ignitions and voltage peak value.The protection of distribution transformers with a series choke is a new approach dedicated to environments prone to the occurrence of transients with high steepness.Experimental results show that the application of serial choke with suitable parameters realizes the reduction of dU/dt at the machines terminal from 24 kV/μs to 5 kV/μs,as well as the reduction of voltage peak value from 10 kV to 5 kV.The number of ignitions is also reduced. 展开更多
关键词 配电变压器 扼流圈 瞬变 开关 阻尼 切换操作 网络经营 绝缘系统
下载PDF
A Fast Extraction Method in the Applicaton of UHV Transmission Line Fault Location
17
作者 Li Wang Jiale Suonan Zaibin Jiao 《Energy and Power Engineering》 2013年第4期1277-1283,共7页
To aim at the distribution parameter characteristics of UHV transmission line, this paper presents a fast extraction method (FE) to extract the accurate fundamentals of current and voltage from the UHV transmission li... To aim at the distribution parameter characteristics of UHV transmission line, this paper presents a fast extraction method (FE) to extract the accurate fundamentals of current and voltage from the UHV transmission line transient process, and locates the fault by utilizing two-end unsynchronized algorithm. The simulation result shows that this method has good performance of accuracy and stability, and has better location precision by comparing with results of one cycle Fourier algorithm. Therefore the method can efficiently improve the precision of fault location during the transient process, and makes the error of location results less than 0.5%. 展开更多
关键词 UHV fast Extraction Method Matrix PENCIL transient Process FAULT LOCATION
下载PDF
Research on Reverse Recovery Transient of Parallel Thyristors for Fusion Power Supply
18
作者 查烽炜 宋执权 +2 位作者 傅鹏 董琳 王敏 《Plasma Science and Technology》 SCIE EI CAS CSCD 2014年第7期716-720,共5页
In nuclear fusion power supply systems, the thyristors often need to be connected in parallel for sustaining large current. However, research on the reverse recovery transient of parallel thyristors has not been repor... In nuclear fusion power supply systems, the thyristors often need to be connected in parallel for sustaining large current. However, research on the reverse recovery transient of parallel thyristors has not been reported yet. When several thyristors are connected in parallel,they cannot turn-off at the same moment, and thus the turn-off model based on a single thyristor is no longer suitable. In this paper, an analysis is presented for the reverse recovery transient of parallel thyristors. Parallel thyristors can be assumed as one virtual thyristor so that the reverse recovery current can be modeled by an exponential function. Through equivalent transformation of the rectifier circuit, the commutating over-voltage can be calculated based on Kirchhoff’s equation. The reverse recovery current and commutation over-voltage waveforms are measured on an experiment platform for a high power rectifier supply. From the measurement results, it is concluded that the modeling method is acceptable. 展开更多
关键词 parallel thyristors reverse recovery transient commutating over-voltage high power rectifier
下载PDF
Targeted Search for Fast Radio Bursts with Nanshan 26m Radio Telescope
19
作者 Jian-Wei Mao Jian-Ping Yuan +9 位作者 Zhi-Gang Wen Jian Li Na Wang Pei Wang Rai Yuen Yu-Bin Wang Nan-Nan Zhai Zhi-Yong Liu Mao-Zheng Chen Guang-Hui Li 《Research in Astronomy and Astrophysics》 SCIE CAS CSCD 2022年第6期64-71,共8页
Fast radio bursts(FRBs)are radio transients that are bright and have short duration,with their physical mechanism not being fully understood.We conducted a targeted search for bursts from FRB 20201124A between 2021 Ju... Fast radio bursts(FRBs)are radio transients that are bright and have short duration,with their physical mechanism not being fully understood.We conducted a targeted search for bursts from FRB 20201124A between 2021 June 2and July 20.High time-resolution data were collected for 104.5 hr using the ROACH2-based digital backend.We introduce the details of our FRB search pipeline which is based on HEIMDALL and FETCH.Testing of the injected mock FRBs search could help us better understand the performance of the pipelines,and improve the search algorithms and classifiers.To study the efficiency of our pipeline,5000 mock FRBs were injected into the data and searched using the pipeline.The results of the mock FRB search show that our pipeline can recover almost all(?90%)the injected mock FRBs above a signal-to-noise ratio(S/N)threshold of 15,and the performance is still acceptable(?80%)for injected S/Ns from 10 to 15.The recovery fraction displays relations with S/N,dispersion measure and pulse width.No bursts were detected from FRB 20201124A in the middle of 2021.The non-detection of FRB 20201124A may be due to its quiet phase window or no emission above the threshold of the Nanshan telescope. 展开更多
关键词 transients fast radio bursts-methods observational-methods data analysis
下载PDF
Statistical properties of fast radio bursts elucidate their origins:magnetars are favored over gamma-ray bursts
20
作者 崔翔翰 张承民 +11 位作者 王双强 张见微 李菂 彭勃 朱炜玮 李查德 王娜 吴庆东 叶长青 王德华 杨佚沿 刁振琪 《Research in Astronomy and Astrophysics》 SCIE CAS CSCD 2021年第8期285-292,共8页
Fast radio bursts(FRBs) are extremely strong radio flares lasting several milliseconds,most of which come from unidentified objects at a cosmological distance.They can be apparently repeating or not.In this paper,we a... Fast radio bursts(FRBs) are extremely strong radio flares lasting several milliseconds,most of which come from unidentified objects at a cosmological distance.They can be apparently repeating or not.In this paper,we analyzed 18 repeaters and 12 non-repeating FRBs observed in the frequency bands of 400–800 MHz from Canadian Hydrogen Intensity Mapping Experiment(CHIME).We investigated the distributions of FRB isotropic-equivalent radio luminosity,considering the K correction.Statistically,the luminosity distribution can be better fitted by Gaussian form than by power-law.Based on the above results,together with the observed FRB event rate,pulse duration,and radio luminosity,FRB origin models are evaluated and constrained such that the gamma-ray bursts(GRBs) may be excluded for the non-repeaters while magnetars or neutron stars(NSs) emitting the supergiant pulses are preferred for the repeaters.We also found the necessity of a small FRB emission beaming solid angle(about 0.1 sr) from magnetars that should be considered,and/or the FRB association with soft gamma-ray repeaters(SGRs) may lie at a low probability of about 10%.Finally,we discussed the uncertainty of FRB luminosity caused by the estimation of the distance that is inferred by the simple relation between the redshift and dispersion measure(DM). 展开更多
关键词 transients:fast radio bursts methods:statistical stars:magnetars
下载PDF
上一页 1 2 29 下一页 到第
使用帮助 返回顶部