A comparative study for petroleum removal capacities of the bacterial consortia entrapped in sodium alginate,sodium alginate/poly(vinyl alcohol),and bushnell haas agar

The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different polymers such as Sodium Alginate(SA),Sodium Alginate/Poly(Vinyl Alcohol)(SA/PVA),and Bushnell Haas Agar(BHA).In addition to SA and SA/PVA,which are cost-effective,non-toxic and have different functional groups,BHA,which is frequently encountered in laboratory-scale studies but has not been used as an entrapment material until now.Based on these,the polymers with different surface morphologies and chemical compositions were analyzed by SEM and FT-IR.While the petroleum removal efficiency was higher with the entrapped bacterial consortia than with the free one,BHA-entrapped bacterial consortium enhanced the petroleum removal more than SA and SA/PVA.Accordingly,the degradation rate of bacterial consortia entrapped with BHA was 2.039 day^(-1),SA/PVA was 1.560,SA was 0.993,the half-life period of BHA-entrapped bacterial consortia is quite low(t_(1/2)=0.339)compared with SA(t_(1/2)=0.444)and SA/PVA(t_(1/2)=0.697).The effects of the four main factors such as:amount of BHA(0.5,1,1.5,2,2.5,3 g),disc size(4,5,6,7,8 mm),inoculum concentration(1,2.5,5,7.5,10 mL),and incubation period on petroleum removal were also investigated.The maximum petroleum removal(94.5%)was obtained at≥2.5 mL of bacterial consortium entrapped in 2 g BHA with a 7 mm disc size at 168 h and the results were also confirmed by statistical analysis.Although a decrease was observed during the reuse of bacterial consortium entrapped in BHA,the petroleum removal was still above 50%at 10th cycle.Based on GC-MS analysis,the removal capacity of BHA-entrapped consortium was over 90%for short-chain n-alkanes and 80%for medium-chain n-alkanes.Overall,the obtained data are expected to provide a potential guideline in cleaning up the large-scale oil pollution in the future.Since there has been no similar study investigating petroleum removal with the bacterial consortia entrapped with BHA,this novel entrapment material can potentially be used in the treatment of petroleum pollution in advanced remediation studies.

Polyvinyl Acetate and Vinyl Acetate-Ethylene Hybrid Adhesive: Synthesis, Characterization, and Properties

The goal is to develop a hybrid IPN network of polyvinyl acetate (PVAc) and ethylene-vinyl acetate (VAE). In this research work, the vinyl acetate (VAc)/ VAE hybrid emulsion and polyvinyl acetate emulsion (PVAc) were effectively synthesized. Emulsions with various characteristics have been developed by adjusting the weight ratios between the vinyl acetate monomer and the VAE component. The impacts on the mechanical, thermal, and physical properties of the films were investigated using tests for pencil hardness, tensile shear strength, pH, contact angle measurement, differential scanning calorimetry (DSC), and viscosity. When 5.0 weight percent VAE was added, the tensile shear strength in dry conditions decreased by 18.75% after a 24-hour bonding period, the heat resistance decreased by 26.29% (as per WATT 91) and the tensile shear strength decreased by approximately 36.52% in wet conditions (per EN 204). The pristine sample’s results were also confirmed by the contact angle test. The interpenetrating network (IPN) formation in hybrid PVAc emulsion as primary bonds does not directly attach to PVAc and VAE chains. The addition of VAE reduced the mechanical properties (at dry conditions) and heat resistance as per WATT 91. Contact angle analysis demonstrated that PVAc adhesives containing VAE had increased water resistance when compared to conventional PVA stabilised PVAc homopolymer-based adhesives. When compared to virgin PVAc Homo, the water resistance of the PVAc emulsion polymerization was enhanced by the addition of VAE.

Analyzing Precipitation Acidity Changes Post Train Derailment and Vinyl Chloride Release in East Palestine, Ohio: Exploring Biomedical and Environmental Ramifications

This study investigates the aftermath of a significant train derailment and vinyl chloride release incident in East Palestine, Ohio, with a particular focus on the analysis of precipitation acidity changes and the concentration of vinyl chloride in samples. The research seeks to elucidate the complex relationship between industrial accidents, atmospheric chemistry, and their potential implications for human health and the environment. Through meticulous examination of variations in precipitation acidity patterns, this study provides valuable insights into the dispersion and impact of toxic agents in the environment following industrial mishaps. The results underscore the intricate interplay between these factors, highlighting the need for a multidisciplinary approach that bridges the realms of environmental science and biomedical concerns. This research contributes to a growing body of knowledge that addresses the broader consequences of industrial incidents on public health. It underscores the importance of proactive measures, such as enhanced monitoring and surveillance, risk assessment, public education, and regulatory reform, to mitigate the environmental and health risks associated with industrial activities involving hazardous materials. By fostering collaboration between experts and stakeholders, this study advocates for a holistic approach to safeguarding both our environment and the well-being of communities affected by industrial accidents.

Improving physical properties of poly(vinyl alcohol)/montmorillonite nanocomposite hydrogels via the Hofmeister effect

Hydrogel is a kind of three-dimensional crosslinked polymer material with high moisture content.However,due to the network defects of polymer gels,traditional hydrogels are usually brittle and fragile,which limits their practical applications.Herein,we present a Hofmeister effect-aided facile strategy to prepare high-performance poly(vinyl alcohol)/montmorillonite nanocomposite hydrogels.Layered montmorillonite nanosheets can not only serve as crosslinking agents to enhance the mechanical properties of the hydrogel but also promote the ion conduction.More importantly,based on the Hofmeister effect,the presence of(NH_(4))_(2)SO_(4)can endow nanocomposite hydrogels with excellent mechanical properties by affecting PVA chains'aggregation state and crystallinity.As a result,the as-prepared nanocomposite hydrogels possess unique physical properties,including robust mechanical and electrical properties.The as-prepared hydrogels can be further assembled into a high-performance flexible sensor,which can sensitively detect large-scale and small-scale human activities.The simple design concept of this work is believed to provide a new prospect for developing robust nanocomposite hydrogels and flexible devices in the future.

Graphene quantum dots doped poly(vinyl alcohol)hybrid membranes for desalination via pervaporation

Pervaporation desalination by highly hydrophilic materials such as poly(vinyl alcohol)(PVA)based separation membrane is a burgeoning technology of late years.However,the improvement of membrane flux in pervaporation desalination has been a difficult task.Here,a novel hybrid membrane with doped graphene oxide quantum dots(GOQDs)which is rich in hydrophilic groups and small size into the matrix of PVA was prepared to improve the membrane flux.The membranes structures were described by field emission scanning electron microscopy(FESEM),atomic force microscopy(AFM),Fourier transform infrared(FT-IR),differential scanning calorimetry(DSC),thermogravimetric analysis(TGA)and X-ray diffraction(XRD).And more,Water contact angle,swelling degree,and pervaporation properties were carried out to explore the effect of GOQDs in PVA matrix.In addition,GOQDs content in the hybrid membrane,NaCl concentration,and feed temperature were investigated accordingly.Moreover,the hydrogen bonds between PVA chains were weakened by the interaction between GOQDs and PVA chains.Significantly,the hybrid membrane with optimized doped GOQDs content,200 mg·L^(-1),displays a high membrane flux of 17.09 kg·m^(-2)·h^(-1)and the salt rejection is consistently greater than 99.6%.

Regulating the Localization of Intumescent Flame Retardant for Improving the Flame Retardancy of Ethylene-vinyl Acetate Copolymer Using Polyamide 6 as a Charring Agent

Polyamide 6 (PA6) was employed as a charring agent of intumescent flame retardant (IFR) to improve the flame retardancy of ethylene-vinyl acetate copolymer (EVA). Different processing procedures were used to regulate the localization of IFR in the EVA matrix. Localizations in which IFR was dispersed in the PA6phase or in the EVA phase were prepared. The effect of the localization of IFR on the flame retardancy of EVA was investigated. The limited oxygen index (LOI), vertical burning (UL 94) and cone calorimeter test (CCT)showed that the localization of IFR in the EVA matrix exhibited a remarkable influence on the flame retardancy.Compared with EVA/IFR, a weak improvement in the flame retardancy was observed in the EVA/PA6/IFR blend withthe localization of IFR in the PA6 phase. When IFR was regulated from the PA6 phase to the EVA matrix,a remarkable increase in the flame retardancy was exhibited. The LOI was increased from 27.8%to 32.7%, and the UL 94 vertical rating was increased from V-2 to V-0. Moreover, an approximately 41.36%decrease in the peak heat release rate was exhibited. A continuous and compact intumescent charring layer that formed in the blends with the localization of IFR in the EVA matrix should be responsible for its excellent flame retardancy.

十二烷基硫酸钠表面改性水滑石对PVC热稳定性能的影响

采用十二烷基硫酸钠(SDS)对镁铝镧碳酸根型水滑石(LDHs)表面进行湿法改性,讨论了不同改性条件对聚氯乙烯(PVC)静态热稳定性能的影响,通过X射线衍射仪(XRD)、扫描电子显微镜(SEM)和红外光谱仪(FTIR)进行表征。采用刚果红试纸法、烘箱变色法、转矩流变法、热重分析法等测定了SDS改性前后PVC/LDHs样品的热稳定性能。结果表明,恒定pH=7,SDS为LDHs质量的10%,水浴80℃下搅拌3 h,改性效果最佳;SDS并未破坏LDHs的晶体结构,仅吸附在表面,增强了与PVC的相容性;改性后的PVC/LDHs样品静态及动态热稳定时间达65、28.5 min,改善了后期着色,更易塑化成型;最大质量损失速率对应温度为346℃,较未添加前增加55℃,能较好地抑制PVC的热降解。

含磷POSS阻燃乙烯基酯树脂性能研究

将含磷POSS(DMPOSS)以5wt%、10wt%和15wt%的添加量添加到乙烯基酯树脂中,通过差示扫描量热仪(DSC)、热重分析(TG)、极限氧指数(LOI)、锥形量热仪和扫描电镜(SEM)测试研究了DMPOSS对乙烯基酯树脂玻璃化转变温度、热稳定性和燃烧性能的影响。DSC测试结果表明:DMPOSS的加入能够明显提升乙烯基酯树脂的玻璃化转变温度。LOI测试结果表明:添加DMPOSS改性的乙烯基酯树脂的氧指数随DMPOSS含量的增加而逐渐升高。当添加15wt%DMPOSS时,乙烯基酯树脂的氧指数达到23.8%。锥形量热仪测试结果表明:DMPOSS的加入能够有效降低乙烯基酯树脂的热释放。当添加15wt%DMPOSS时,乙烯基酯树脂的热释放速率峰值降低了44.9%,总的热释放降低了30.4%。

乙烯基树脂及其团状模塑料的耐磨性研究

本文对比了乙烯基树脂浇注体和乙烯基团状模塑料(乙烯基BMC)的力学性能、热性能和耐磨性能,结果表明,相比乙烯基树脂,乙烯基BMC材料具有优异的综合性能,其中硬度在60以上,提升了77%;弯曲强度达到160 MPa以上,提升了14%;老化前质量磨损在4~5 mg之间,体积磨损在2~3 mm 3之间,分别降低了约96%和97%;老化后质量磨损为8~30 mg,体积磨损在4~14 mm 3之间,分别降低了65%和80%以上。

接枝共聚物对乙烯-乙烯醇共聚物/聚乙烯共混物结构及性能的影响

通过熔融共混法制备了乙烯-乙烯醇共聚物(EVOH)/低密度聚乙烯(LDPE)共混物,再加入马来酸酐接枝聚乙烯(PE-g-MAH)用于促进EVOH的分散性。利用DSC、SEM、力学性能测试、阻隔性能测试等方法表征了共混物的结构及PE-g-MAH的加入对共混物性能的影响。实验结果表明,LDPE与EVOH不相容,EVOH以球形颗粒均匀分散在LDPE基体中,添加PE-g-MAH后可显著改善EVOH的分散性,大幅降低EVOH的结晶温度,进一步提高EVOH/LDPE共混物的强度及对一类萜类物质的阻隔性能。另外,当EVOH含量为10%(w)时,EVOH/LDPE共混物的阻隔性能相对纯LDPE有明显提升,之后进一步提高EVOH含量,阻隔性能变化不大。

用于应变传感器的自愈合抗冻离子水凝胶

近年来,导电水凝胶在电子驱动器、医疗监测传感器及可穿戴设备等领域的应用备受关注。然而,多数凝胶机械强度低、寿命短、抗冻性能差,从而导致低温下无法使用。为了解决该问题,以聚乙烯醇、离子液体1-丁基-3-甲基咪唑四氟硼酸盐和植酸为原料,在水与二甲基亚砜(DMSO)二元溶液中借助多重氢键及离子基团间的静电作用实现了超分子自组装,制备出一种可用于应变传感的自愈合、耐低温多功能离子水凝胶。研究发现在凝胶中引入DMSO,凝胶表现出优异的抗冻能力;同时,调节DMSO的含量可优化凝胶的强度和韧性,当DMSO体积分数为40%时,最大拉伸强度和断裂伸长率分别可达4.43 MPa和869.1%。该离子水凝胶在低温应变传感器、智能可穿戴响应元件等领域展现出较好的应用潜力。

聚氯乙烯塑料建材的现状和展望

综述了国外聚氯乙烯的历史、产销数据,国内聚氯乙烯塑料现状,国内建筑能耗现状及要求,塑料建材对双碳的贡献以及塑料建材的前景展望。

小空腔内EVA发泡胶带的黏结性能和发泡行为研究

采用4,4-氧代双苯磺酰肼(OBSH)作为发泡剂、以过氧化苯甲酰(BPO)作为交联剂、C9树脂作为增黏剂制备了乙烯-乙酸乙烯酯(EVA)发泡胶带,研究组分对2D发泡胶带使用性能的影响和机理。结果表明,在合适的EVA/BPO/OBSH/C9(100/3/3/40)条件下,发泡胶带能够在170℃和205℃下发泡。发泡胶带具有良好的使用性能,膨胀率超过2倍,不发生挂流,表面平整。同时,发泡胶带的拉伸强度高于5 MPa,断裂伸长率超过240%,吸水率低于5%。

乙烯与乙烯基三乙氧基硅烷共聚物的制备与表征

采用一系列结构不同的α-二亚胺镍催化剂,在倍半乙基氯化铝(EASC)作用下,以配位共聚的方法制备乙烯和乙烯基三乙氧基硅烷(VTEoS)共聚物。研究了VTEoS的浓度、催化剂用量、n(Al)/n(Ni)、乙烯压力、聚合时间、溶剂以及催化剂结构对共聚反应的影响,得到了最优化的聚合条件。通过核磁共振(NMR)、哀减全反射傅里叶变换红外光谱(ATR-FTIR)、热失重分析(TGA)、焙烧法、聚合物膜的接触角测试等方法分别表征了聚合物的结构、热稳定性、硅质量分数和聚合物膜的表面性能。结果表明,以C4为催化剂,二氯甲烷为溶剂时,共聚活性(以1 mol Ni计)最高达9.10×10^(5) g/(mol·h),共聚物中硅的质量分数为0.74%~3.39%。含硅单体的引入,能够提高聚合物的热稳定性和疏水性能。

高分子实验中模具的制备及应用

高分子实验中很多时候要用到不同形状的聚四氟乙烯模具,比如,聚合物薄膜的制备及性能研究。不同的用途需要制备不同形状的模具,如,薄膜拉伸测试,需要长方形的模具以制备长方形的薄膜;薄膜耐水压测试,需要制备圆形的模具以制备圆形的薄膜;吸水率测试,需要方形的模具以制备方形的薄膜。模具的深度决定了薄膜的厚度,进一步决定了薄膜的不同性能。展示模具的应用,是通过制备不同形状和不同厚度的聚乙烯醇薄膜,来研究薄膜厚度对薄膜性能的影响。

乙烯与乙烯基五甲基二硅氧烷的配位共聚

后过渡金属催化剂具有独特的“链行走”机理以及对极性基团的耐毒性等特点,可用于催化α-烯烃与极性单体共聚,得到结构与性能优异的功能化聚烯烃.本文以α-二亚胺镍(Ⅱ)配合物(C1~C6)为催化剂,在倍半乙基氯化铝(EASC)作用下,以乙烯和乙烯基五甲基二硅氧烷(VPMDSO)为单体进行配位共聚,制备了一系列共聚物.考察了VPMDSO单体浓度、催化剂用量、Al/Ni摩尔比、乙烯压力、聚合时间、溶剂以及催化剂结构对配位共聚反应的影响,得到了最优的聚合条件.通过核磁共振氢谱(1H NMR)、傅里叶变换红外光谱(FTIR)、凝胶渗透色谱(GPC)、热失重分析(TGA)及接触角测试等表征了聚合物的微观结构、热稳定性、硅含量和表面性能.研究结果表明,α-二亚胺镍(Ⅱ)配合物催化活性可达1.26×10^(6)g·mol_(Ni)^(-1)·h^(-1),共聚物中硅含量为0.25%~0.87%(质量分数),与聚乙烯(PE)相比,共聚物的表面能降低、疏水性提高.

N⁃苯基马来酰亚胺共聚物的合成及对PVC树脂耐热改性效果研究

通过种子乳液聚合结合半连续加料方式,成功聚合出分子结构一致且与聚氯乙烯(PVC)树脂具有良好相容性的聚(N‐苯基马来酰亚胺‐苯乙烯‐丙烯腈)(PNSA)共聚物胶乳,将其与PVC树脂直接复合制备PNSA/PVC复合材料,并对PNAS耐热改性的效果进行评价。结果表明,PNSA纳米胶乳颗粒粒径在155.3~251.5 nm之间,粒径分布均一;PNSA共聚物分子组成呈无规结构,分子结构一致,差示扫描量热曲线呈现单一的玻璃化转变温度(T_(g)),且与PVC树脂具有极佳的相容性;PNSA含量由0升高至50%(质量比,下同)时,复合材料的T_(g)由84.8℃提高到107.2℃,提高了22.4℃,维卡软化温度由71.2℃提高到91.9℃,提高了20.7℃;除耐热性改善以外,复合材料的力学性能也有一定程度的提高,本文的研究有利于PVC应用领域的进一步拓展。

聚丙烯腈对聚乙烯醇膜形貌和性能的改进

通过流延成膜的方法制备了聚乙烯醇/聚丙烯腈共混薄膜。通过扫描电镜分析了共混膜的形貌。通过差式扫描量热仪、热重分析、拉伸测试、表面接触角测试研究了共混膜的热力学性能、机械性能和化学性能。测试结果显示聚丙烯腈对聚乙烯醇膜的形貌和性能产生了显著的影响。

氯乙烯光催化氟化联合合成HFC-152a和HCFC-142b后处理工艺的研究

根据氯乙烯光催化氟化联合合成HFC-152a和HCFC-142b反应产物的特点,设计了工艺成熟、流程合理的后处理工艺,并提出了各工序的技术要点。

基于故障树法的氯乙烯氧氯化单元失效影响因素分析

为解决频繁非计划停工问题,利用故障树分析法,对某氯乙烯装置氧氯化单元的危险性因素进行分析,构建氧氯化单元系统异常故障树,确定了催化剂跑损、旋风分离器故障堵塞等为氧氯化单元失效的主要因素,采取针对性措施后效果良好。