The goal of this study was to compare the predicted void content with the actual void content of pervious concrete cylinders. All pervious concrete systems are designed with a void content in mind to facilitate a spec...The goal of this study was to compare the predicted void content with the actual void content of pervious concrete cylinders. All pervious concrete systems are designed with a void content in mind to facilitate a specific permeability;however, due to variable placing techniques and inherent issues with the material, the actual in place void content often varies from designed. This study quantifies this difference and attempts to develop a correction factor, such that design values are more approximate to in place pervious concrete systems. The analysis included multiple mixtures with three design void contents (15%, 25%, 35%), two aggregate types (angular and rounded), and three different water-to-cement ratios (0.33, 0.37, 0.41). These samples were methodically designed to contain a desired void ratio, then casted in the laboratory, in which the compaction of each sample was controlled for consistency. Following casting, the in-place void content was determined using ASTM C1754 and compared to the predicted. The difference was then averaged to create a correction factor requiring more or less cement paste, which was used to redesign the mixtures. The new mixtures were then compared to the predicted void content. The results of this study show that initial designs can vary from 3% - 15% on average from initial designed void content and that a correction factor can be used to obtain within 3% on average of the target void ratios.展开更多
The effects of voids(void content,void shape and size)on the interlaminar shear strength of[(±45)_(4)/(0,90)/(±45)_(2)]_(S) and [(±45)/0_(4)/(0,90)/0_(2)]_(S) composite laminates were investigated.Speci...The effects of voids(void content,void shape and size)on the interlaminar shear strength of[(±45)_(4)/(0,90)/(±45)_(2)]_(S) and [(±45)/0_(4)/(0,90)/0_(2)]_(S) composite laminates were investigated.Specimens with void contents in the range of 0.2%-8.0%for [(±45)_(4)/(0,90)/(±45)_(2)]_(S) and 0.2%-6.1%for[(±45)/0_(4)/(0,90)/0_(2)]_(S) were fabricated from carbon/epoxy fabric through varying autoclave pressures.The characteristics of the voids were studied by using optical image analysis to explain the interlaminar shear strength results.The influences of voids on the interlaminar shear strength of the two stacking sequences were compared in terms of the void content and size and shape of the void.The effect of voids on the initiation and propagation of interlaminar failure of both stacking sequence composites was found.展开更多
This study describes the performance of concrete in fresh state, intended for sealing deep bore-holes in the host rock of radioactive repositories. Set of different paste volumes, combinations of water-to-powder ratio...This study describes the performance of concrete in fresh state, intended for sealing deep bore-holes in the host rock of radioactive repositories. Set of different paste volumes, combinations of water-to-powder ratios and fine aggregate contents have been performed within the frame of this study. The main objective was to search for tendencies, logical connections and phenomena that occur for different combination of materials regarding the fluidity and segregation and mainly the effect from the (paste) or fine aggregate content. It shall be pointed out that this investigation is a suggestion on how concrete can be optimized using two simple test methods based on changing the paste content. The results highlighted the importance of having sufficient amounts of filler and cement paste for separate and carry larger particles, which gives the concrete good workability and fluidity at casting. It was concluded that the slump behaviors can be optimized based on the adjustments of the superplastisizer dosage.展开更多
文摘The goal of this study was to compare the predicted void content with the actual void content of pervious concrete cylinders. All pervious concrete systems are designed with a void content in mind to facilitate a specific permeability;however, due to variable placing techniques and inherent issues with the material, the actual in place void content often varies from designed. This study quantifies this difference and attempts to develop a correction factor, such that design values are more approximate to in place pervious concrete systems. The analysis included multiple mixtures with three design void contents (15%, 25%, 35%), two aggregate types (angular and rounded), and three different water-to-cement ratios (0.33, 0.37, 0.41). These samples were methodically designed to contain a desired void ratio, then casted in the laboratory, in which the compaction of each sample was controlled for consistency. Following casting, the in-place void content was determined using ASTM C1754 and compared to the predicted. The difference was then averaged to create a correction factor requiring more or less cement paste, which was used to redesign the mixtures. The new mixtures were then compared to the predicted void content. The results of this study show that initial designs can vary from 3% - 15% on average from initial designed void content and that a correction factor can be used to obtain within 3% on average of the target void ratios.
基金Project supported by Harbin Aircraft Industry Co.,Ltd.,China。
文摘The effects of voids(void content,void shape and size)on the interlaminar shear strength of[(±45)_(4)/(0,90)/(±45)_(2)]_(S) and [(±45)/0_(4)/(0,90)/0_(2)]_(S) composite laminates were investigated.Specimens with void contents in the range of 0.2%-8.0%for [(±45)_(4)/(0,90)/(±45)_(2)]_(S) and 0.2%-6.1%for[(±45)/0_(4)/(0,90)/0_(2)]_(S) were fabricated from carbon/epoxy fabric through varying autoclave pressures.The characteristics of the voids were studied by using optical image analysis to explain the interlaminar shear strength results.The influences of voids on the interlaminar shear strength of the two stacking sequences were compared in terms of the void content and size and shape of the void.The effect of voids on the initiation and propagation of interlaminar failure of both stacking sequence composites was found.
文摘This study describes the performance of concrete in fresh state, intended for sealing deep bore-holes in the host rock of radioactive repositories. Set of different paste volumes, combinations of water-to-powder ratios and fine aggregate contents have been performed within the frame of this study. The main objective was to search for tendencies, logical connections and phenomena that occur for different combination of materials regarding the fluidity and segregation and mainly the effect from the (paste) or fine aggregate content. It shall be pointed out that this investigation is a suggestion on how concrete can be optimized using two simple test methods based on changing the paste content. The results highlighted the importance of having sufficient amounts of filler and cement paste for separate and carry larger particles, which gives the concrete good workability and fluidity at casting. It was concluded that the slump behaviors can be optimized based on the adjustments of the superplastisizer dosage.
