Analysis of multiple-faults of high-voltage circuit breakers based on non-negative matrix decomposition

High-voltage circuit breakers are the core equipment in power networks,and to a certain extent,are related to the safe and reliable operation of power systems.However,their core components are prone to mechanical faults.This study proposes a component separation method to detect multiple mechanical faults in circuit breakers that can achieve online real-time monitoring.First,a model and strategy are presented for obtaining mechanical voiceprint signals from circuit breakers.Subsequently,the component separation method was used to decompose the voiceprint signals of multiple faults into individual component signals.Based on this,the recognition of the features of a single-fault voiceprint signal can be achieved.Finally,multiple faults in high-voltage circuit breakers were identified through an experimental simulation and verification of the circuit breaker voiceprint signals collected from the substation site.The research results indicate that the proposed method exhibits excellent performance for multiple mechanical faults,such as spring structures and loose internal components of circuit breakers.In addition,it provides a reference method for the real-time online monitoring of high-voltage circuit breakers.

Method of Mechanical Fault Intelligent Diagnosis Based on Vibration Signal of High Voltage Circuit Breaker

Based on vibration signal of high voltage circuit breaker,a new method of intelligent fault diagnosis that wavelet packet extracts energy entropy which are used as characteristic vector of the support vector machine(SVM)to construct classifier for fault diagnosis is presented.The acceleration sensors are applied to collecting the vibration data of different states of high voltage circuit breakers based on self-made experimental platform in this method.The wavelet packet are fully applied to analyze the vibration signal and decompose vibration signal into three layers,and wavelet packet energy entropy of each frequency band are as the characteristic vector of circuit breaker failure mode.Then the intelligent diagnosis network is established on the basis of the support vector machine theory.It is verified that the method has a better capability of classification and a higher accuracy compared with the traditional neural network diagnosis method through distinguishing the three fault modes which are tripping device stuck,the vacuum arcing chamber fixed bolt looseness and too much friction force of the transmission mechanism of circuit breaker in this paper.

Understanding the correlation between energy-state mismatching and open-circuit voltage loss in bulk heterojunction solar cells

Photoinduced intermolecular charge transfer(PICT)determines the voltage loss in bulk heterojunction(BHJ)organic photovoltaics(OPVs),and this voltage loss can be minimized by inducing efficient PICT,which requires energy-state matching between the donor and acceptor at the BHJ interfaces.Thus,both geometrically and energetically accessible delocalized state matching at the hot energy level is crucial for achieving efficient PICT.In this study,an effective method for quantifying the hot state matching of OPVs was developed.The degree of energy-state matching between the electron donor and acceptor at BHJ interfaces was quantified using a mismatching factor(MF)calculated from the modified optical density of the BHJ.Furthermore,the correlation between the open-circuit voltage(Voc)of the OPV device and energy-state matching at the BHJ interface was investigated using the calculated MF.The OPVs with small absolute MF values exhibited high Voc values.This result clearly indicates that the energy-state matching between the donor and acceptor is crucial for achieving a high Voc in OPVs.Because the MF indicates the degree of energy-state matching,which is a critical factor for suppressing energy loss,it can be used to estimate the Voc loss in OPVs.

Fault DiagnosisMethod of Energy Storage Unit of Circuit Breakers Based on EWT-ISSA-BP

Aiming at the problem of energy storage unit failure in the spring operating mechanism of low voltage circuit breakers(LVCBs).A fault diagnosis algorithm based on an improved Sparrow Search Algorithm(ISSA)optimized Backpropagation Neural Network(BPNN)is proposed to improve the operational safety of LVCB.Taking the 1.5kV/4000A/75kA LVCB as an example.According to the current operating characteristics of the energy storage motor,fault characteristics are extracted based on Empirical Wavelet Transform(EWT).Traditional BPNN has problems such as difficulty adjusting network weights and thresholds,being sensitive to initial weights,and quickly falling into local optimal solutions.The Sparrow Search Algorithm(SSA)with self-adjusting weight factors combined with bidirectional mutations is added to optimize the selection of BPNN hyperparameters.The results show that the ISSA-BPNN can accurately and quickly distinguish six conditions of motor voltage reduction:motor voltage increase,motor voltage decrease,energy storage spring stuck,transmission gear stuck,regular state and energy storage spring not locked.It is suitable for fault diagnosis and detection of the energy storage part of LVCB.

Study on the Mathematical Model of Dielectric Recovery Characteristics in High Voltage SF6 Circuit Breaker

According to the stream theory, this paper proposes a mathematical model of the dielectric recovery characteristic based on the two-temperature ionization equilibrium equation. Taking the dynamic variation of charged particle＇s ionization and attachment into account, this model can be used in collaboration with the Coulomb collision model, which gives the relationship of the heavy particle temperature and electron temperature to calculate the electron density and temperature under different pressure and electric field conditions, so as to deliver the breakdown electric field strength under different pressure conditions. Meanwhile an experiment loop of the circuit breaker has been built to measure the breakdown voltage. It is shown that calculated results are in conformity with experiment results on the whole while results based on the stream criterion are larger than experiment results. This indicates that the mathematical model proposed here is more accurate for calculating the dielectric recovery characteristic, it is derived from the stream model with some improvement and refinement and has great significance for increasing the simulation accuracy of circuit breaker＇s interruption characteristic.

Multi-mapping Fault Diagnosis of High Voltage Circuit Breaker Based on Mathematical Morphology and Wavelet Entropy

Mechanical faults of high voltage circuit breakers(CBs)seriously affect the reliability of their operation,which may cause severe damage to power systems.In order to monitor operational conditions and detect mechanical faults of CBs,a multi-parameter monitoring system is designed and a fault diagnosis method based on multi-mapping is proposed.The paper focuses on the trip/close circuits,the spring-charging mechanism and the transmission mechanism,and obtains four current signals and a vibration signal that can reflect CB conditions.For the current signals,a morphological filter is used to remove noise and then characteristics of the waveforms’shape information are extracted.For vibration signals,the wavelet packet transform is used to decompose the signal into various frequency bands,and the sample entropy of the low frequency bands and the wavelet energy of the high frequency bands are calculated,respectively.Based on these feature parameters,a multi-mapping strategy is proposed for CB fault diagnosis.Laboratory experiments have been conducted to obtain on-site signals under various conditions,and experiment results have verified that monitoring the aforementioned signals and using the corresponding feature extraction and fault diagnosis methods,the mechanical faults of high voltage CBs can be effectively diagnosed.

A Comparative Study on Open Circuit Voltage Models for Lithium-ion Batteries

The current research of state of charge(SoC) online estimation of lithium-ion battery(LiB) in electric vehicles(EVs)mainly focuses on adopting or improving of battery models and estimation filters. However, little attention has been paid to the accuracy of various open circuit voltage(OCV) models for correcting the SoC with aid of the ampere-hour counting method. This paper presents a comprehensive comparison study on eighteen OCV models which cover the majority of models used in literature. The low-current OCV tests are conducted on the typical commercial LiFePO/graphite(LFP) and LiNiMnCoO/graphite(NMC) cells to obtain the experimental OCV-SoC curves at different ambient temperature and aging stages. With selected OCV and SoC points from experimental OCV-SoC curves, the parameters of each OCV model are determined by curve fitting toolbox of MATLAB 2013. Then the fitting OCV-SoC curves based on diversified OCV models are also obtained. The indicator of root-mean-square error(RMSE) between the experimental data and fitted data is selected to evaluate the adaptabilities of these OCV models for their main features, advantages,and limitations. The sensitivities of OCV models to ambient temperatures, aging stages, numbers of data points,and SoC regions are studied for both NMC and LFP cells. Furthermore, the influences of these models on SoC estimation are discussed. Through a comprehensive comparison and analysis on OCV models, some recommendations in selecting OCV models for both NMC and LFP cells are given.

Effect of Valence Band Tail Width on the Open Circuit Voltage of P3HT:PCBM Bulk Heterojunction Solar Cell:AMPS-1D Simulation Study

The effect of the valence band tail width on the open circuit voltage of P3HT：PCBM bulk heterojunction solar cell is investigated by using the AMPS-1D computer program. An effective medium model with exponential valence and conduction band tail states is used to simulate the photovoltaic cell. The simulation result shows that the open circuit voltage depends Iinearly on the logarithm of the generation rate and the slope depends on the width of the valence band tail. The open circuit voltage decreases with the increasing width of the band tail. The dark and light ideality factors increase with the width of the valence band tail.

Improvement of the Open Circuit Voltage of CZTSe Thin-Film Solar Cells by Surface Sulfurization Using SnS

The objective of this study is to find an effective method to improve Voc without Jsc loss for Cu2ZnSnSe4 （CZTSe） thin film solar cells, which have been fabricated by the one step co-evaporation technique. Surface sulfurization of CZTSe thin films is carried out by using one technique that does not utilize toxic H2S gas; a sequential evaporation of SnS after CZTSe deposition and the annealing of CZTSe thin films in selenium vapor. A Cu2ZnSn（S, Se）4 （CZTSSe） thin layer is grown on the surface of the CZTSe thin film after the annealing. The conversion efficiency of the completed device is improved due to the enhancement of Voc, which could be attributed to the formation of a hole-recombination barrier at the surface or the passivation of the surface and grain boundary by S incorporation.

Experimental Measurement of Minority Carriers Effective Lifetime in Silicon Solar Cell Using Open Circuit Voltage Decay under Magnetic Field in Transient Mode

This manuscript presents a simple method for excess minority carriers’ lifetime measurement within the base region of p-n junction polycrystalline solar cell in transient mode. This work is an experimental transient 3-Dimensionnal study. The magnitude of the magnetic field B is varied from 0 mT to 0.045 mT. Indeed, the solar cell is illuminated by a stroboscopic flash with air mass 1.5 and under magnetic field in transient state. The experimental details are assumed in a figure. The procedure is outlined by the Open Circuit Voltage Decay analysis. Effective minority carrier life-time is calculated by fitting the linear zone of the transient voltage decay curve because linear decay is an ideal decay. The kaleidagraph software permits access to the slope of the curve which is inversely proportional to the lifetime. The external magnetic effects on minority carriers’ effective lifetime is then presented and analyzed. The analysis shows that the charge carrier’s effective lifetime decrease with the magnetic field increase.

Research on Online Monitoring Methods on SF_(6) Circuit Breakers

To promote the accuracy and application of arcing time measurement for SF_6 circuit breaker in substation,five measurement methods are investigated by two cases experimentally. First,the test results of the five methods for a circuit breaker in different stages of wear and a circuit breaker with a component failure were presented. Then,the time error is analyzed by simulation.Finally,the advantage and disadvantage of these methods are discussed.

Modeling and Simulation of Heterojunction Solar Cell with Mono Crystalline Silicon

The monocrystalline silicon is a promising material that could be used in solar cells that convert light into electricity. Although the cost of ordinary silicon (Si) solar cells has decreased significantly over the past two decades, the conversion efficiency of these cells has remained relatively high. While solar cells have a great potential as a device of renewable energy, the high cost they incur per Watt continues to be a significant barrier to their widespread implementation. As a consequence, it is vital to conduct research into alternate materials that may be used in the construction of solar cells. The heterojunction solar cell (HJSC), which is based on n-type zinc oxide (n-ZnO) and p-type silicon (p-Si), is one of the numerous alternatives of the typical Si single homojunction solar cell. There are many deficiencies that can be found in the published research on n-ZnO/p-Si heterojunction solar cell. Inconsistencies in the stated value of open circuit voltage (Voc) of the solar cell are one example of deficiency. The absence of a full theoretical study to evaluate the potential of the solar cell structure is another deficiency that can be found in these researches. A lower value of experimentally obtained VOC in comparison to the theoretical prediction based on the band-gap between n-ZnO and p-Si. There needs to be more consensus among scientists regarding the optimal conditions for the growth of zinc oxide. Many software’s are available for simulating and optimizing the solar cells based on these parameters. For this purpose, in this dissertation, I provide computational results relevant to n-ZnO/p-Si HJSC to overcome deficiencies that have been identified. While modeling and simulating the potential of the solar cell structure with AFORS-HET, it is essential to consider the constraints that exist in the real world. AFORS-HET was explicitly designed to mimic the multilayer solar cell arrangement. In AFORS-HET, we can add up to seven layers for solar cell layout. By using this software, we can figure out the open circuit voltage (VOC), the short circuit current (JSC), the quantum efficiency (QE, %), the heterojunction energy band structure, and the power conversion efficiency (PCE).

Comprehensive Examination of Solar Panel Design: A Focus on Thermal Dynamics

In the 21st century, the deployment of ground-based Solar Photovoltaic (PV) Modules has seen exponential growth, driven by increasing demands for green, clean, and renewable energy sources. However, their usage is constrained by certain limitations. Notably, the efficiency of solar PV modules on the ground peaks at a maximum of 25%, and there are concerns regarding their long-term reliability, with an expected lifespan of approximately 25 years without failures. This study focuses on analyzing the thermal efficiency of PV Modules. We have investigated the temperature profile of PV Modules under varying environmental conditions, such as air velocity and ambient temperature, utilizing Computational Fluid Dynamics (CFD). This analysis is crucial as the efficiency of PV Modules is significantly impacted by changes in the temperature differential relative to the environment. Furthermore, the study highlights the effect of airflow over solar panels on their temperature. It is found that a decrease in the temperature of the PV Module increases Open Circuit Voltage, underlining the importance of thermal management in optimizing solar panel performance.

Brief overview of electrochemical potential in lithium ion batteries

The physical fundamentals and influences upon electrode materials＇ open-circuit voltage （OCV） and the spatial distribution of electrochemical potential in the full cell are briefly reviewed. We hope to illustrate that a better understanding of these scientific problems can help to develop and design high voltage cathodes and interfaces with low Ohmic drop. OCV is one of the main indices to evaluate the performance of lithium ion batteries （LIBs）, and the enhancement of OCV shows promise as a way to increase the energy density. Besides, the severe potential drop at the interfaces indicates high resistance there, which is one of the key factors limiting power density.

Research of Arc Chamber Optimization Techniques Based on Flow Field and Arc Joint Simulation

The preliminary design of an arc chamber in the 550 kV SF6 circuit breaker was proposed in accordance with the technicai requirements and design experience. The structural optimization was carried out according to the no-load flow field simulation results and verified by no-load pressure measurement. Based on load simulation results such as temperature field variation at the arc area and the tendency of post arc current under different recovery voltage, the second optimal design was completed and its correctness was certificated by a breaking test. Results demonstrate that the interrupting capacity of an arc chamber can be evaluated by the comparison of the gas medium recovery speed and post arc current growth rate.

High voltage generator circuit with low power and high efficiency applied in EEPROM

This paper presents a low power and high efficiency high voltage generator circuit embedded in electrically erasable programmable read-only memory（EEPROM）.The low power is minimized by a capacitance divider circuit and a regulator circuit using the controlling clock switch technique.The high efficiency is dependent on the zero threshold voltage（V_（th）） MOSFET and the charge transfer switch（CTS） charge pump.The proposed high voltage generator circuit has been implemented in a 0.35μm EEPROM CMOS process.Measured results show that the proposed high voltage generator circuit has a low power consumption of about 150.48μW and a higher pumping efficiency（83.3%） than previously reported circuits.This high voltage generator circuit can also be widely used in low-power flash devices due to its high efficiency and low power dissipation.

A novel sourceline voltage compensation circuit for embedded NOR flash memory

A novel sourceline voltage compensation circuit for program operation in embedded flash memory is presented. With the sourceline voltage compensation circuit, the charge pump can modulate the output voltage according to the number of cells to be programmed with data ＂0＂. So the IR drop on the sourceline decoding path is compensated, and a stable sourceline voltage can be obtained. In order to reduce the power dissipation in program operation, a bit-inversion program circuit is adopted. By using the bit-inversion program circuit, the cells programmed to data ＂0＂ are limited to half of the bits of a write data word, thus power dissipation in program operation is greatly reduced. A 1.8-V 8 × 64-kbits embedded NOR flash memory employing the two circuits has been integrated using a GSMC 0.18-μm 4-poly 4-metal CMOS process.

Organic dyes based on triphenylamine for dye-sensitized solar cells:Structure–property relationships

Three new organic dyes based on triphenylamine with a structure of A-D-A-D-A (D1), A-D-A (D2) and D-A (D3) were designed, theoretically calculated and synthesized for dye-sensitized solar cells. Dye D1 exhibits a broader absorption than D2 and D3, due to the intramolecular charge transfer between the donor triphenylamine and the acceptor benzothiadiazole. Dye D1 exhibits a lower HOMO and a lower LUMO than D2 and D3 due to the electron-withdrawing benzothiadiazole. The number of anchoring group cyanoacrylic acid has no obvious influence on absorption and energy levels of D2 and D3. The LUMO of D1 locates on benzothiadiazole rather than cyanoacrylic acid anchoring groups, while the LUMOs of D2 and D3 are localized on cyanoacrylic acid. D2 and D3 give higher short-circuit current density than D1. D3 with one anchoring group gives the highest open-circuit voltage. Consequently, the D3-based device gives the highest efficiency. © 2016 Science Press

A-π-D-π-A Type Small Molecules Using Ethynylene Linkages for Organic Solar Cells with High Open-circuit Voltages

Introducing ethynylene linkages in a conjugated molecule can deepen the HOMO level, decrease the steric con- straints and better delocalize the n electrons and so on, which are beneficial for organic solar cells. Furthermore, the typical method of introducing acetylene linkages by Sonogashira reactions can avoid the usage of toxic stannyl in- termediates and potentially dangerous lithiation reactions. In this study, two simple small molecules BEDPP and NEDPP are designed and synthesized, in which two diketopyrrolopyrrole units are symmetrically connected to benzene and naphthalene cores, respectively, via acetylene linkages. And the BHJ （Bulk Heterojunction） solar cells based on BEDPP and NEDPP without using solvent additive and without any post-treatment for the active layers provide us power conversion efficieneies of 1.48% and 2.31% with remarkably high open circuit voltages up to 0.90 and 0.98 V, respectively.

A novel high voltage start up circuit for an integrated switched mode power supply

A novel high voltage start up circuit for providing an initial bias voltage to an integrated switched mode power supply（SMPS） is presented.An enhanced mode VDMOS transistor,the gate of which is biased by a floating pisland, is used to provide start up current and sustain high voltage.An NMOS transistor having a high source to ground breakdown voltage is included to extend the bias voltage range to the SMPS.Simulation results indicate that the high voltage start up circuit can start and restart as designed.The proposed structure is believed to be more energy saving and cost-effective compared with other solutions.