Generator synchronization is an important and frequent operation in rural small hydropower station. In order to ensure that generator can be paralleled in the grid automatically, efficiently, and stably in the rural s...Generator synchronization is an important and frequent operation in rural small hydropower station. In order to ensure that generator can be paralleled in the grid automatically, efficiently, and stably in the rural small hydropower station whose parallel in operation still needs to be accomplished manually. This paper described an automatic quasi-synchronizing device, based on 89C52 Single-chip Microcomputer (SCM). Its hardware includes three modules and its software is structuralized. The device structure is simple, and its reliability is high and the maintenance is easy. Besides, convenient Human Machine Interface (HMI) makes the parameter setting simple and flexible展开更多
A 3.5 times PLL clock frequency multiplier for low voltage different signal (LVDS) driver is presented. A novel adaptive charge pump can automatically switch the loop bandwidth and a voltage-controlled oscillator (...A 3.5 times PLL clock frequency multiplier for low voltage different signal (LVDS) driver is presented. A novel adaptive charge pump can automatically switch the loop bandwidth and a voltage-controlled oscillator (VCO) is designed with the aid of frequency ranges reuse technology. The circuit is implemented using 1st Silicon 0.25 μm mixed-signal complementary metal-oxide-semiconductor (CMOS) process. Simulation results show that the PLL clock frequency multiplier has very low phase noise and very short capture time .展开更多
This paper describes a large tuning range low phase noise voltage-controlled ring oscillator (ring VCO) based on a different cascade voltage logic delay cell with current-source load to change the current of output ...This paper describes a large tuning range low phase noise voltage-controlled ring oscillator (ring VCO) based on a different cascade voltage logic delay cell with current-source load to change the current of output node. The method for optimization is presented. Furthermore, the analysis of performance of the proposed ring VCO is confirmed by the measurement results. The three-stage proposed ring VCO was fabricated in the 180-nm CMOS process of SMIC. The measurement results show that the oscillator frequency of the ring VCO is from 0.77O to 5.286 GHz and the phase noise is 97.93 dBc/Hz at an offset of 1 MHz from 5.268 GHz with a total power of 15.1 mW from a 1.8 V supply while occupying only 0.00175 mm2 of the core die area.展开更多
As for aerospace electromagnetic relay (AEMR) which is of small batches and having difficulty in automatic production, the uncertainty phenomenon is remarkable due to excessive manual work involved in the assembly a...As for aerospace electromagnetic relay (AEMR) which is of small batches and having difficulty in automatic production, the uncertainty phenomenon is remarkable due to excessive manual work involved in the assembly and adjustment processes. This kind of uncertainty may increase the coil voltage difference (CVD) caused by hesitate phenomenon in the pick up process of AEMR. Taking a certain type of AEMR for example, the CVD problem in the actual producing process has been studied in this paper. The primary cause of this issue, two-steps of armature motion (namely hesitate phenomenon) in the pick up process, has been found by analyzing the matching characteristics of electromagnetic and mechanical torques of AEMR. Through the optimization of the matching characteristics, the two-steps of armature motion problem is solved by robust design of the return reed which is a key part of AEMR. The validity of this research has been proved by the comparison of characteristics of AMER before and after the optimization.展开更多
文摘Generator synchronization is an important and frequent operation in rural small hydropower station. In order to ensure that generator can be paralleled in the grid automatically, efficiently, and stably in the rural small hydropower station whose parallel in operation still needs to be accomplished manually. This paper described an automatic quasi-synchronizing device, based on 89C52 Single-chip Microcomputer (SCM). Its hardware includes three modules and its software is structuralized. The device structure is simple, and its reliability is high and the maintenance is easy. Besides, convenient Human Machine Interface (HMI) makes the parameter setting simple and flexible
基金Supported by the National Key Pre-Research Project of China (413010701-3)
文摘A 3.5 times PLL clock frequency multiplier for low voltage different signal (LVDS) driver is presented. A novel adaptive charge pump can automatically switch the loop bandwidth and a voltage-controlled oscillator (VCO) is designed with the aid of frequency ranges reuse technology. The circuit is implemented using 1st Silicon 0.25 μm mixed-signal complementary metal-oxide-semiconductor (CMOS) process. Simulation results show that the PLL clock frequency multiplier has very low phase noise and very short capture time .
基金supported by the Research Project of Science and Technology at Universities of Inner Mongolia Autonomous Region(No.NJZY11016)the Innovation Fund of Ministry of Science&Technology for Small and Medium Sized Enterprises,China(No.11C26213211234)
文摘This paper describes a large tuning range low phase noise voltage-controlled ring oscillator (ring VCO) based on a different cascade voltage logic delay cell with current-source load to change the current of output node. The method for optimization is presented. Furthermore, the analysis of performance of the proposed ring VCO is confirmed by the measurement results. The three-stage proposed ring VCO was fabricated in the 180-nm CMOS process of SMIC. The measurement results show that the oscillator frequency of the ring VCO is from 0.77O to 5.286 GHz and the phase noise is 97.93 dBc/Hz at an offset of 1 MHz from 5.268 GHz with a total power of 15.1 mW from a 1.8 V supply while occupying only 0.00175 mm2 of the core die area.
基金the National Natural Science Foundation of China(No.51107012)the National High-tech Research and Development Program of China(No.2009AA04Z110)+1 种基金the China Postdoctoral Science Foundation(No.2011M500057)the Fundamental Research Funds for the Central Universities(No.HIT.NSRIF.2010099)
文摘As for aerospace electromagnetic relay (AEMR) which is of small batches and having difficulty in automatic production, the uncertainty phenomenon is remarkable due to excessive manual work involved in the assembly and adjustment processes. This kind of uncertainty may increase the coil voltage difference (CVD) caused by hesitate phenomenon in the pick up process of AEMR. Taking a certain type of AEMR for example, the CVD problem in the actual producing process has been studied in this paper. The primary cause of this issue, two-steps of armature motion (namely hesitate phenomenon) in the pick up process, has been found by analyzing the matching characteristics of electromagnetic and mechanical torques of AEMR. Through the optimization of the matching characteristics, the two-steps of armature motion problem is solved by robust design of the return reed which is a key part of AEMR. The validity of this research has been proved by the comparison of characteristics of AMER before and after the optimization.