高性能复合镀层具有优良的耐磨、耐蚀性能,能满足工业生产对材料性能的要求。研究了脉冲电沉积RE Ni W B PTFE Al2O3 复合镀层的成分、形貌及性能。结果表明:脉冲电流及Al2O3 固体颗粒能明显提高RE Ni W B PTFE Al2O3 复合镀层中W和B的...高性能复合镀层具有优良的耐磨、耐蚀性能,能满足工业生产对材料性能的要求。研究了脉冲电沉积RE Ni W B PTFE Al2O3 复合镀层的成分、形貌及性能。结果表明:脉冲电流及Al2O3 固体颗粒能明显提高RE Ni W B PTFE Al2O3 复合镀层中W和B的含量;与直流电沉积相比,脉冲电沉积RE Ni W B复合镀层的表面裂纹已明显减小,但裂纹仍存在,当Al2O3 耐磨颗粒及PTFE减摩微粒嵌入RE Ni W B复合镀层中以后,在SEM 400倍下观察,RE Ni W B PTFE Al2O3镀层已不存在裂纹, 而且镀液中Al2O3 颗粒含量越多,晶粒就越细;此外,研究表明,镀液中Al2O3 颗粒含量增加, RE Ni W B PTFE Al2O3 复合镀层镀态硬度增加,磨损率降低。展开更多
The process of electrodepositing Fe-Cr2O3 composite coating on polyacrylonitrile(PAN)-based carbon fibers and its catalytic graphitization were studied.Carbon fibers with and without electrodeposited Fe-Cr2O3 composit...The process of electrodepositing Fe-Cr2O3 composite coating on polyacrylonitrile(PAN)-based carbon fibers and its catalytic graphitization were studied.Carbon fibers with and without electrodeposited Fe-Cr2O3 composite coating were heat treated at different temperatures and the structural changes were characterized by XRD,Raman spectroscopy and SEM.The results indicate that Fe-Cr2O3 composite coating exhibits a significant catalytic effect on graphitization of carbon fibers at low temperatures.When the Fe-Cr2O3-coated carbon fibers were heat treated at 1 300°C,the interlayer spacing(d002) and ratio of relative peak area(AD/AG) reach 3.364-and 0.34,respectively.Whereas,the extent of graphitization of pristine carbon fibers is comparatively low even after heat treatment at 2 800°C and the values of d002 and AD/AG are 3.414 and 0.68,respectively.The extent of graphitization of carbon fibers increases not only with the increase of the catalyst gross but also the Cr2O3 content in Fe-Cr2O3 coating.The catalytic effect of Fe-Cr2O3 composite coating accords with the dissolution precipitation mechanism.展开更多
ZHOU Bai-Bin *,1,2 WEI Yong-De 1 LI Zhong-Hua 1 ( 1 Department of Applied Chemistry,Ha rbin Institute of Technology ￡?Harbin￡±￡ì￡°￡°￡°￡±￡(c)( 2 Department of Chemistry,Harbin Norm...ZHOU Bai-Bin *,1,2 WEI Yong-De 1 LI Zhong-Hua 1 ( 1 Department of Applied Chemistry,Ha rbin Institute of Technology ￡?Harbin￡±￡ì￡°￡°￡°￡±￡(c)( 2 Department of Chemistry,Harbin Normal University￡?Harbin￡±￡ì￡°￡°￡?￡°￡(c) The air-solid interface reaction of Ce,Lu with K10 H 3[Gd (SiMo 4 W￡*O￡3￡1￡(c) 2]through chemistry-heated permeation is reported for the fi rst time￡(r)The permeated complex is characterized by ICP and the result shows tha t the mini mum Ce,Lu can permeate into the inner sph ere of K 10 H ￡3 ￡?Gd ￡¨SiMo ￡′ W ￡* O ￡3￡1 ￡(c) 2]The IR ,XRD patterns give the eviden ce that after permeation the comple x still keeps the Keggin structure,howe ver,its crystal structure is different from the complex before permeation￡(r)The cond uctivity of the permeated complex has been measured with the four-electr ode method and the data show that the co nductivity of the complex after permeation is 10 6 times higher than that of the sample before permeation and reaches ￡′￡(r)84 6×10 -1 S·cm -1 ￡(r)These indicate that the permeated c omplex is a good solid electrolyte and further appli cations are also expected￡(r)展开更多
文摘高性能复合镀层具有优良的耐磨、耐蚀性能,能满足工业生产对材料性能的要求。研究了脉冲电沉积RE Ni W B PTFE Al2O3 复合镀层的成分、形貌及性能。结果表明:脉冲电流及Al2O3 固体颗粒能明显提高RE Ni W B PTFE Al2O3 复合镀层中W和B的含量;与直流电沉积相比,脉冲电沉积RE Ni W B复合镀层的表面裂纹已明显减小,但裂纹仍存在,当Al2O3 耐磨颗粒及PTFE减摩微粒嵌入RE Ni W B复合镀层中以后,在SEM 400倍下观察,RE Ni W B PTFE Al2O3镀层已不存在裂纹, 而且镀液中Al2O3 颗粒含量越多,晶粒就越细;此外,研究表明,镀液中Al2O3 颗粒含量增加, RE Ni W B PTFE Al2O3 复合镀层镀态硬度增加,磨损率降低。
基金Project(2006CB600903) supported by the National Basic Research Program of China
文摘The process of electrodepositing Fe-Cr2O3 composite coating on polyacrylonitrile(PAN)-based carbon fibers and its catalytic graphitization were studied.Carbon fibers with and without electrodeposited Fe-Cr2O3 composite coating were heat treated at different temperatures and the structural changes were characterized by XRD,Raman spectroscopy and SEM.The results indicate that Fe-Cr2O3 composite coating exhibits a significant catalytic effect on graphitization of carbon fibers at low temperatures.When the Fe-Cr2O3-coated carbon fibers were heat treated at 1 300°C,the interlayer spacing(d002) and ratio of relative peak area(AD/AG) reach 3.364-and 0.34,respectively.Whereas,the extent of graphitization of pristine carbon fibers is comparatively low even after heat treatment at 2 800°C and the values of d002 and AD/AG are 3.414 and 0.68,respectively.The extent of graphitization of carbon fibers increases not only with the increase of the catalyst gross but also the Cr2O3 content in Fe-Cr2O3 coating.The catalytic effect of Fe-Cr2O3 composite coating accords with the dissolution precipitation mechanism.
基金financially supported by the National Natural Science Foundation of China (No. 50902006)the National High Technology Development 863 Program of China (No. 2009AA03Z428)National Student Innovative Experiment Plan
文摘ZHOU Bai-Bin *,1,2 WEI Yong-De 1 LI Zhong-Hua 1 ( 1 Department of Applied Chemistry,Ha rbin Institute of Technology ￡?Harbin￡±￡ì￡°￡°￡°￡±￡(c)( 2 Department of Chemistry,Harbin Normal University￡?Harbin￡±￡ì￡°￡°￡?￡°￡(c) The air-solid interface reaction of Ce,Lu with K10 H 3[Gd (SiMo 4 W￡*O￡3￡1￡(c) 2]through chemistry-heated permeation is reported for the fi rst time￡(r)The permeated complex is characterized by ICP and the result shows tha t the mini mum Ce,Lu can permeate into the inner sph ere of K 10 H ￡3 ￡?Gd ￡¨SiMo ￡′ W ￡* O ￡3￡1 ￡(c) 2]The IR ,XRD patterns give the eviden ce that after permeation the comple x still keeps the Keggin structure,howe ver,its crystal structure is different from the complex before permeation￡(r)The cond uctivity of the permeated complex has been measured with the four-electr ode method and the data show that the co nductivity of the complex after permeation is 10 6 times higher than that of the sample before permeation and reaches ￡′￡(r)84 6×10 -1 S·cm -1 ￡(r)These indicate that the permeated c omplex is a good solid electrolyte and further appli cations are also expected￡(r)
