It is desired to require a walking robot for the elderly and the disabled to have large capacity,high stiffness,stability,etc.However,the existing walking robots cannot achieve these requirements because of the weight...It is desired to require a walking robot for the elderly and the disabled to have large capacity,high stiffness,stability,etc.However,the existing walking robots cannot achieve these requirements because of the weight-payload ratio and simple function.Therefore,Improvement of enhancing capacity and functions of the walking robot is an important research issue.According to walking requirements and combining modularization and reconfigurable ideas,a quadruped/biped reconfigurable walking robot with parallel leg mechanism is proposed.The proposed robot can be used for both a biped and a quadruped walking robot.The kinematics and performance analysis of a 3-UPU parallel mechanism which is the basic leg mechanism of a quadruped walking robot are conducted and the structural parameters are optimized.The results show that performance of the walking robot is optimal when the circumradius R,r of the upper and lower platform of leg mechanism are 161.7 mm,57.7 mm,respectively.Based on the optimal results,the kinematics and dynamics of the quadruped walking robot in the static walking mode are derived with the application of parallel mechanism and influence coefficient theory,and the optimal coordination distribution of the dynamic load for the quadruped walking robot with over-determinate inputs is analyzed,which solves dynamic load coupling caused by the branches’ constraint of the robot in the walk process.Besides laying a theoretical foundation for development of the prototype,the kinematics and dynamics studies on the quadruped walking robot also boost the theoretical research of the quadruped walking and the practical applications of parallel mechanism.展开更多
Existing errors in the structure and kinematic parameters of multi-legged walking robots,the motion trajectory of robot will diverge from the ideal sports requirements in movement.Since the existing error compensation...Existing errors in the structure and kinematic parameters of multi-legged walking robots,the motion trajectory of robot will diverge from the ideal sports requirements in movement.Since the existing error compensation is usually used for control compensation of manipulator arm,the error compensation of multi-legged robots has seldom been explored.In order to reduce the kinematic error of robots,a motion error compensation method based on the feedforward for multi-legged mobile robots is proposed to improve motion precision of a mobile robot.The locus error of a robot body is measured,when robot moves along a given track.Error of driven joint variables is obtained by error calculation model in terms of the locus error of robot body.Error value is used to compensate driven joint variables and modify control model of robot,which can drive the robots following control model modified.The model of the relation between robot's locus errors and kinematic variables errors is set up to achieve the kinematic error compensation.On the basis of the inverse kinematics of a multi-legged walking robot,the relation between error of the motion trajectory and driven joint variables of robots is discussed.Moreover,the equation set is obtained,which expresses relation among error of driven joint variables,structure parameters and error of robot's locus.Take MiniQuad as an example,when the robot MiniQuad moves following beeline tread,motion error compensation is studied.The actual locus errors of the robot body are measured before and after compensation in the test.According to the test,variations of the actual coordinate value of the robot centroid in x-direction and z-direction are reduced more than one time.The kinematic errors of robot body are reduced effectively by the use of the motion error compensation method based on the feedforward.展开更多
Recent literature on walking robots deals predominantly with multi-degrees-of-freedom leg mechanisms and machines capable of adopting several gaits.This paper explores the other end of the spectrum suggesting mechanis...Recent literature on walking robots deals predominantly with multi-degrees-of-freedom leg mechanisms and machines capable of adopting several gaits.This paper explores the other end of the spectrum suggesting mechanisms derived from a four bar coupler curve for a one degree of freedom walking robot.Simulation of the walk indicates that body of the robot is able to move with low variation in velocity.The best strategy for changing the gait to enable the robot to walk over obstacles and the effect of change in length of different links are explored to open up the possibility of a two degree of freedom walking robot with the capability of changing its gait,suitable as a low cost unit for several applications.Such rugged units would permit the use of an IC engine as the primary source of power and could be of utility in installations where electronics may not be functional.In simple walking machines the foot of a leg is usually required to trace a D shaped curve with respect to the chassis.In this paper we begin with a Hoecken mechanism capable of tracing such a curve.The foot is required to move parallel to itself and the same could be achieved using a six or eight link mechanism.A few such devices have been synthesized in this paper and their motion properties compared.The study also covers the possibility of providing adjustments to vary the step length and height of the foot's movement.展开更多
It will still in lack of a simulation platform used to learn the walking of underwater quadruped walking robot. In order to alleviate this shortage,a simulation platform for the underwater quadruped walking robot base...It will still in lack of a simulation platform used to learn the walking of underwater quadruped walking robot. In order to alleviate this shortage,a simulation platform for the underwater quadruped walking robot based on Kane dynamic model and CPG-based controller is constructed. The Kane dynamic model of the underwater quadruped walking robot is processed with a commercial package MotionGenesis Kane 5. 3. The forces between the feet and ground are represented as a spring and damper. The relation between coefficients of spring and damper and stability of underwater quadruped walking robot in the stationary state is studied. The CPG-based controller consisted of Central Pattern Generator( CPG) and PD controller is presented,which can be used to control walking of the underwater quadruped walking robot. The relation between CPG parameters and walking speed of underwater quadruped walking robot is investigated. The relation between coefficients of spring and damper and walking speed of underwater quadruped walking robot is studied. The results show that the simulation platform can imitate the stable walking of the underwater quadruped walking robot.展开更多
The paper studies the problem of movement of a two-legged walking machine on a movable base.This task is relevant for design rehabilitation and mechanotherapy complexes for people with impaired functions of the muscul...The paper studies the problem of movement of a two-legged walking machine on a movable base.This task is relevant for design rehabilitation and mechanotherapy complexes for people with impaired functions of the musculoskeletal system and presents a mathematical model that allows obtaining the kinematic and dynamic parameters of the movement of the executive units of the device under study.The paper presents a method for planning the trajectory of exoskeleton links,its algorithmic and software implementation.The paper proposes the structure of the automatic link position control system,which ensures the movement of the executive links along a given trajectory.A mathematical apparatus is proposed for studying the dynamics of the controlled movement of the links of the human-machine system of the exoskeleton.The article presents the results of numerical.experiments on the movement of the low-limb exoskeleton leg in the one step mode and analyzes them.展开更多
In this paper, a walking robot is established. The zero-moment point(ZMP) is used to stabilize the working robot. The kinematic model of the robot based on denavit-hartenberg(D-H) method is presented in this thesi...In this paper, a walking robot is established. The zero-moment point(ZMP) is used to stabilize the working robot. The kinematic model of the robot based on denavit-hartenberg(D-H) method is presented in this thesis. And then the dynamic model, based on Lagrange method, is built by simplifying the kinematic model of robot body. A kinematic simulation to the robotic system is achieved based on Adams. Driving torque of left ankle is calculated according to joint angle, angular velocity and angular acceleration. The validity of the dynamic model is testified by comparing with the result of simulation.展开更多
In this paper, the kinematics and dynamics of an underwater quadruped walking robot were derived based on Kane dynamic equations. This methodology allows construction of the dynamic model simply and incrementally. The...In this paper, the kinematics and dynamics of an underwater quadruped walking robot were derived based on Kane dynamic equations. This methodology allows construction of the dynamic model simply and incrementally. The velocity and angular velocity components of an underwater quadruped walking robot were served as the generalized velocities. The forces which contribute to dynamics of an underwater quadruped walking robot were determined by Kane's approach. The equations of hydrodynamic forces of an underwater quadruped walking robot were deduced. Hydrodynamic coefficients were determined by experiments. The dynamic model was established by obtaining the generalized active forces and the generalized inertia forces. Numerical simulations of the walking behavior on underwater flat ground were implemented to verify the dynamic model of an underwater quadruped walking robot. Simulation results show that the dynamic model is correct.展开更多
The prober with an immovable lander and a movable rover is commonly used to explore the Moon’s surface.The rover can complete the detection on relatively flat terrain of the lunar surface well,but its detection effic...The prober with an immovable lander and a movable rover is commonly used to explore the Moon’s surface.The rover can complete the detection on relatively flat terrain of the lunar surface well,but its detection efficiency on deep craters and mountains is relatively low due to the difficulties of reaching such places.A lightweight four-legged landing and walking robot called“FLLWR”is designed in this study.It can take off and land repeatedly between any two sites wherever on deep craters,mountains or other challenging landforms that are difficult to reach by direct ground movement.The robot integrates the functions of a lander and a rover,including folding,deploying,repetitive landing,and walking.A landing control method via compliance control is proposed to solve the critical problem of impact energy dissipation to realize buffer landing.Repetitive landing experiments on a five-degree-of-freedom lunar gravity testing platform are performed.Under the landing conditions with a vertical velocity of 2.1 m/s and a loading weight of 140 kg,the torque safety margin is 10.3%and 16.7%,and the height safety margin is 36.4%and 50.1%for the cases with or without an additional horizontal disturbance velocity of 0.4 m/s,respectively.The study provides a novel insight into the next-generation lunar exploration equipment.展开更多
The problem of lifting the foot of the walking propulsion device of an underwater mobile robot is considered,taking into account the additional"compression""force acting on it.A mathematical model has b...The problem of lifting the foot of the walking propulsion device of an underwater mobile robot is considered,taking into account the additional"compression""force acting on it.A mathematical model has been developed for the detachment of a propulsion foot from the ground,based on Henry's laws establishing the concentration of dissolved air in a liquid,the law of gas expansion at a constant temperature,Darcy's law on fluid filtration,and the theorem on the motion of the center of mass of a solid body.The linearized model allows to obtain and analytical solutions.Based on the solution of the variat ional problem,optimal modes of lifting the foot of the walking propulsion of an underwater mobile robot are established.展开更多
This paper presents a novel design of minimalist bipedal walking robot with flexible ankle and split-mass balancing systems.The proposed approach implements a novel strategy to achieve stable bipedal walk by decouplin...This paper presents a novel design of minimalist bipedal walking robot with flexible ankle and split-mass balancing systems.The proposed approach implements a novel strategy to achieve stable bipedal walk by decoupling the walking motion control from the sideway balancing control.This strategy allows the walking controller to execute the walking task independently while the sideway balancing controller continuously maintains the balance of the robot.The hip-mass carry approach and selected stages of walk implemented in the control strategy can minimize the efect of major hip mass of the robot on the stability of its walk.In addition,the developed smooth joint trajectory planning eliminates the impacts of feet during the landing.In this paper,the new design of mechanism for locomotion systems and balancing systems are introduced.An additional degree of freedom introduced at the ankle joint increases the sensitivity of the system and response time to the sideway disturbances.The efectiveness of the proposed strategy is experimentally tested on a bipedal robot prototype.The experimental results provide evidence that the proposed strategy is feasible and advantageous.展开更多
In this paper, it introduced the mechanical structure design of the multifunctional walking rehabilitation robot, We used the SolidWorks to design and assemble the rehabilitation robot, and optimized the rehabilitatio...In this paper, it introduced the mechanical structure design of the multifunctional walking rehabilitation robot, We used the SolidWorks to design and assemble the rehabilitation robot, and optimized the rehabilitation robot based on ergonomics. The result shows that the multifunctional walking rehabilitation robot has the characteristics of complete functions, convenient operation, compact structure and so on. It can meet the requirements of medical care equipment, and effectively complete the nursing work of patients.展开更多
For the existing problems of walking chair robot such as simple function,lower bearing capacity and not walking in complex environment,a novel varistructured quadruped / biped human-carrying walking chair robot is pro...For the existing problems of walking chair robot such as simple function,lower bearing capacity and not walking in complex environment,a novel varistructured quadruped / biped human-carrying walking chair robot is proposed.The proposed robot could be used as biped and quadruped walking chair robots.Considering the conversion of the walking chair robot from the quadruped to the biped or vice versa,6-UPS and 2-UPS+UP(U,P and S are universal joint,the prismatic pair,and sphere joint,respectively) parallel mechanisms are selected as the leg mechanism of the biped walking robot and quadruped walking robot,respectively.Combining the screw theory and theory of mechanism,the degrees of freedom of the leg mechanism and the body mechanism in diferent motion states are computed so as to meet the requirements of mechanism design.The motion characteristics of the 2-UPS+UP parallel mechanism which is the key part of the walking chair robot are analyzed.Then,the workspace of the moving platform is drawn and the efect of the structural parameters on the workspace volume is studied.Finally,it is found that the volume of the workspace of the moving platform is bigger when the side length ratio and the vertex angle ratio of the fxed platform and the moving platform which are isosceles triangles are close to 1.This study provides a theoretical foundation for the prototype development.展开更多
基金supported by National Natural Science Foundation of China(Grant No.61075099)
文摘It is desired to require a walking robot for the elderly and the disabled to have large capacity,high stiffness,stability,etc.However,the existing walking robots cannot achieve these requirements because of the weight-payload ratio and simple function.Therefore,Improvement of enhancing capacity and functions of the walking robot is an important research issue.According to walking requirements and combining modularization and reconfigurable ideas,a quadruped/biped reconfigurable walking robot with parallel leg mechanism is proposed.The proposed robot can be used for both a biped and a quadruped walking robot.The kinematics and performance analysis of a 3-UPU parallel mechanism which is the basic leg mechanism of a quadruped walking robot are conducted and the structural parameters are optimized.The results show that performance of the walking robot is optimal when the circumradius R,r of the upper and lower platform of leg mechanism are 161.7 mm,57.7 mm,respectively.Based on the optimal results,the kinematics and dynamics of the quadruped walking robot in the static walking mode are derived with the application of parallel mechanism and influence coefficient theory,and the optimal coordination distribution of the dynamic load for the quadruped walking robot with over-determinate inputs is analyzed,which solves dynamic load coupling caused by the branches’ constraint of the robot in the walk process.Besides laying a theoretical foundation for development of the prototype,the kinematics and dynamics studies on the quadruped walking robot also boost the theoretical research of the quadruped walking and the practical applications of parallel mechanism.
基金supported by National Natural Science Foundation of China (Grant Nos. 50675079,50875246)Program for Innovative Research Team (in Science and Technology) in University of Henan Province,China
文摘Existing errors in the structure and kinematic parameters of multi-legged walking robots,the motion trajectory of robot will diverge from the ideal sports requirements in movement.Since the existing error compensation is usually used for control compensation of manipulator arm,the error compensation of multi-legged robots has seldom been explored.In order to reduce the kinematic error of robots,a motion error compensation method based on the feedforward for multi-legged mobile robots is proposed to improve motion precision of a mobile robot.The locus error of a robot body is measured,when robot moves along a given track.Error of driven joint variables is obtained by error calculation model in terms of the locus error of robot body.Error value is used to compensate driven joint variables and modify control model of robot,which can drive the robots following control model modified.The model of the relation between robot's locus errors and kinematic variables errors is set up to achieve the kinematic error compensation.On the basis of the inverse kinematics of a multi-legged walking robot,the relation between error of the motion trajectory and driven joint variables of robots is discussed.Moreover,the equation set is obtained,which expresses relation among error of driven joint variables,structure parameters and error of robot's locus.Take MiniQuad as an example,when the robot MiniQuad moves following beeline tread,motion error compensation is studied.The actual locus errors of the robot body are measured before and after compensation in the test.According to the test,variations of the actual coordinate value of the robot centroid in x-direction and z-direction are reduced more than one time.The kinematic errors of robot body are reduced effectively by the use of the motion error compensation method based on the feedforward.
文摘Recent literature on walking robots deals predominantly with multi-degrees-of-freedom leg mechanisms and machines capable of adopting several gaits.This paper explores the other end of the spectrum suggesting mechanisms derived from a four bar coupler curve for a one degree of freedom walking robot.Simulation of the walk indicates that body of the robot is able to move with low variation in velocity.The best strategy for changing the gait to enable the robot to walk over obstacles and the effect of change in length of different links are explored to open up the possibility of a two degree of freedom walking robot with the capability of changing its gait,suitable as a low cost unit for several applications.Such rugged units would permit the use of an IC engine as the primary source of power and could be of utility in installations where electronics may not be functional.In simple walking machines the foot of a leg is usually required to trace a D shaped curve with respect to the chassis.In this paper we begin with a Hoecken mechanism capable of tracing such a curve.The foot is required to move parallel to itself and the same could be achieved using a six or eight link mechanism.A few such devices have been synthesized in this paper and their motion properties compared.The study also covers the possibility of providing adjustments to vary the step length and height of the foot's movement.
基金Sponsored by the National Nature Science Foundation of China(Grant No.51009091)the Special Research Fund for the Doctoral Program of Higher Education(Grant No.20100073120016)
文摘It will still in lack of a simulation platform used to learn the walking of underwater quadruped walking robot. In order to alleviate this shortage,a simulation platform for the underwater quadruped walking robot based on Kane dynamic model and CPG-based controller is constructed. The Kane dynamic model of the underwater quadruped walking robot is processed with a commercial package MotionGenesis Kane 5. 3. The forces between the feet and ground are represented as a spring and damper. The relation between coefficients of spring and damper and stability of underwater quadruped walking robot in the stationary state is studied. The CPG-based controller consisted of Central Pattern Generator( CPG) and PD controller is presented,which can be used to control walking of the underwater quadruped walking robot. The relation between CPG parameters and walking speed of underwater quadruped walking robot is investigated. The relation between coefficients of spring and damper and walking speed of underwater quadruped walking robot is studied. The results show that the simulation platform can imitate the stable walking of the underwater quadruped walking robot.
基金supported by the President grant,project MK-780.2020.8.
文摘The paper studies the problem of movement of a two-legged walking machine on a movable base.This task is relevant for design rehabilitation and mechanotherapy complexes for people with impaired functions of the musculoskeletal system and presents a mathematical model that allows obtaining the kinematic and dynamic parameters of the movement of the executive units of the device under study.The paper presents a method for planning the trajectory of exoskeleton links,its algorithmic and software implementation.The paper proposes the structure of the automatic link position control system,which ensures the movement of the executive links along a given trajectory.A mathematical apparatus is proposed for studying the dynamics of the controlled movement of the links of the human-machine system of the exoskeleton.The article presents the results of numerical.experiments on the movement of the low-limb exoskeleton leg in the one step mode and analyzes them.
基金supported by the Youth Scientific Research and Innovation Plan of Beijing University of Posts and Telecommunications
文摘In this paper, a walking robot is established. The zero-moment point(ZMP) is used to stabilize the working robot. The kinematic model of the robot based on denavit-hartenberg(D-H) method is presented in this thesis. And then the dynamic model, based on Lagrange method, is built by simplifying the kinematic model of robot body. A kinematic simulation to the robotic system is achieved based on Adams. Driving torque of left ankle is calculated according to joint angle, angular velocity and angular acceleration. The validity of the dynamic model is testified by comparing with the result of simulation.
基金the National Nature Science Foundation of China(No.51009091)the Special ResearchFund for the Doctoral Program of Higher Education(No.20100073120016)
文摘In this paper, the kinematics and dynamics of an underwater quadruped walking robot were derived based on Kane dynamic equations. This methodology allows construction of the dynamic model simply and incrementally. The velocity and angular velocity components of an underwater quadruped walking robot were served as the generalized velocities. The forces which contribute to dynamics of an underwater quadruped walking robot were determined by Kane's approach. The equations of hydrodynamic forces of an underwater quadruped walking robot were deduced. Hydrodynamic coefficients were determined by experiments. The dynamic model was established by obtaining the generalized active forces and the generalized inertia forces. Numerical simulations of the walking behavior on underwater flat ground were implemented to verify the dynamic model of an underwater quadruped walking robot. Simulation results show that the dynamic model is correct.
基金funded by the National Key R&D Program of China(Grant No.2021YFF0307905).
文摘The prober with an immovable lander and a movable rover is commonly used to explore the Moon’s surface.The rover can complete the detection on relatively flat terrain of the lunar surface well,but its detection efficiency on deep craters and mountains is relatively low due to the difficulties of reaching such places.A lightweight four-legged landing and walking robot called“FLLWR”is designed in this study.It can take off and land repeatedly between any two sites wherever on deep craters,mountains or other challenging landforms that are difficult to reach by direct ground movement.The robot integrates the functions of a lander and a rover,including folding,deploying,repetitive landing,and walking.A landing control method via compliance control is proposed to solve the critical problem of impact energy dissipation to realize buffer landing.Repetitive landing experiments on a five-degree-of-freedom lunar gravity testing platform are performed.Under the landing conditions with a vertical velocity of 2.1 m/s and a loading weight of 140 kg,the torque safety margin is 10.3%and 16.7%,and the height safety margin is 36.4%and 50.1%for the cases with or without an additional horizontal disturbance velocity of 0.4 m/s,respectively.The study provides a novel insight into the next-generation lunar exploration equipment.
文摘The problem of lifting the foot of the walking propulsion device of an underwater mobile robot is considered,taking into account the additional"compression""force acting on it.A mathematical model has been developed for the detachment of a propulsion foot from the ground,based on Henry's laws establishing the concentration of dissolved air in a liquid,the law of gas expansion at a constant temperature,Darcy's law on fluid filtration,and the theorem on the motion of the center of mass of a solid body.The linearized model allows to obtain and analytical solutions.Based on the solution of the variat ional problem,optimal modes of lifting the foot of the walking propulsion of an underwater mobile robot are established.
文摘This paper presents a novel design of minimalist bipedal walking robot with flexible ankle and split-mass balancing systems.The proposed approach implements a novel strategy to achieve stable bipedal walk by decoupling the walking motion control from the sideway balancing control.This strategy allows the walking controller to execute the walking task independently while the sideway balancing controller continuously maintains the balance of the robot.The hip-mass carry approach and selected stages of walk implemented in the control strategy can minimize the efect of major hip mass of the robot on the stability of its walk.In addition,the developed smooth joint trajectory planning eliminates the impacts of feet during the landing.In this paper,the new design of mechanism for locomotion systems and balancing systems are introduced.An additional degree of freedom introduced at the ankle joint increases the sensitivity of the system and response time to the sideway disturbances.The efectiveness of the proposed strategy is experimentally tested on a bipedal robot prototype.The experimental results provide evidence that the proposed strategy is feasible and advantageous.
基金Supported by Science and Technology Department of Anhui province Qiushi Plan(JZ2015QSJH0245)National College Students’Entrepreneurship Practice Project(201410359070)
文摘In this paper, it introduced the mechanical structure design of the multifunctional walking rehabilitation robot, We used the SolidWorks to design and assemble the rehabilitation robot, and optimized the rehabilitation robot based on ergonomics. The result shows that the multifunctional walking rehabilitation robot has the characteristics of complete functions, convenient operation, compact structure and so on. It can meet the requirements of medical care equipment, and effectively complete the nursing work of patients.
基金supported by National Natural Science Foundation of China (No. 61075099) FP7-PEOPLE-2012-IRSES:Marie Curie Action "International Research Staf Exchange Scheme" (No. 318902)
文摘For the existing problems of walking chair robot such as simple function,lower bearing capacity and not walking in complex environment,a novel varistructured quadruped / biped human-carrying walking chair robot is proposed.The proposed robot could be used as biped and quadruped walking chair robots.Considering the conversion of the walking chair robot from the quadruped to the biped or vice versa,6-UPS and 2-UPS+UP(U,P and S are universal joint,the prismatic pair,and sphere joint,respectively) parallel mechanisms are selected as the leg mechanism of the biped walking robot and quadruped walking robot,respectively.Combining the screw theory and theory of mechanism,the degrees of freedom of the leg mechanism and the body mechanism in diferent motion states are computed so as to meet the requirements of mechanism design.The motion characteristics of the 2-UPS+UP parallel mechanism which is the key part of the walking chair robot are analyzed.Then,the workspace of the moving platform is drawn and the efect of the structural parameters on the workspace volume is studied.Finally,it is found that the volume of the workspace of the moving platform is bigger when the side length ratio and the vertex angle ratio of the fxed platform and the moving platform which are isosceles triangles are close to 1.This study provides a theoretical foundation for the prototype development.