Investigation of hydroxyl-terminated polybutadiene propellant breaking characteristics and mechanism impacted by submerged cavitation water jet

A submerged cavitation water jet(SCWJ)is an effective method to recycle solid propellant from obsolete solid engines by the breaking method.Solid propellant's breaking modes and mechanical process under SCWJ impact are unclear.This study aims to understand those impact breaking mechanisms.The hydroxyl-terminated polybutadiene(HTPB)propellant was chosen as the research material,and a self-designed test system was used to conduct impact tests at four different working pressures.The high-speed camera characterized crack propagation,and the DIC method calculated strain change during the impact process.Besides,micro and macro fracture morphologies were characterized by scanning electron microscope(SEM)and computed tomography(CT)scanning.The results reveal that the compressive strain concentration region locates right below the nozzle,and the shear strain region distributes symmetrically with the jet axis,which increases to 4% at first 16th ms,the compressive strain rises to 2% and 6% in the axial and transverse direction,respectively.The two tensile cracks formed first at the compression strain concentrate region,and there generate many shear cracks around the tensile cracks,and those shear cracks that develop and aggregate cause the cracks to become wider and cut through the tensile cracks,forming the tensile-shear cracks and the impact parts eventually fail.The HTPB propellant forms a breaking hole shaped conical after impact 10 s.The mass loss increases by 17 times at maximum,with the working pressure increasing by three times.Meanwhile,the damage value of the breaking hole remaining on the surface increases by 7.8 times while 2.9 times in the depth of the breaking hole.The breaking efficiency is closely affected by working pressures.The failure modes of HTPB impacted by SCWJ are classified as tensile crack-dominated and tensile-shear crack-dominated damage mechanisms.

Observation of Zero-Energy Modes with Possible Time-Reversal Symmetry Breaking on Step Edge of CaKFe_(4)As_(4)

Topologically nontrivial Fe-based superconductors attract extensive attentions due to their ability of hosting Majorana zero modes(MZMs)which could be used for topological quantum computation.Topological defects such as vortex lines are required to generate MZMs.Here,we observe the robust edge states along the surface steps of CaKFe_(4)As_(4).Remarkably,the tunneling spectra show a sharp zero-bias peak(ZBP)with multiple integerquantized states at the step edge under zero magnetic field.We propose that the increasing hole doping around step edges may drive the local superconductivity into a state with possible spontaneous time-reversal symmetry breaking.Consequently,the ZBP can be interpreted as an MZM in an effective vortex in the superconducting topological surface state by proximity to the center of a tri-junction with different superconducting order parameters.Our results provide new insights into the interplay between topology and unconventional superconductivity,and pave a new path to generate MZMs without magnetic field.

Team China’s Groundbreaking Success at Paris Olympics

China’s Olympic delegation at the Paris 2024,with 404 athletes competing in 232 events across 30 sports,clinched 40 gold,27 silver,and 24 bronze medals,marking their best performance at an Olympics held abroad.The success of these athletes across various disciplines demonstrates the country’s efforts to expand its athletic prowess while also marks a new chapter for Chinese sportsmanship on the international stage.

Enhancing textile production:Smartex exhibits groundbreaking solutions

Smartex,a trailblazing leader in textile industry innovation,was proud to announce its return to ITM 2024,showcasing unparalleled advancements in quality control and production efficiency.Building on the success of previous exhibitions at ITM 2022 and ITMA Milan 2023,Smartex emerges stronger than ever,presenting its complete Smartex System tailored to transform textile manufacturing.

A record-breaking high efficiency facilitated by hierarchical morphology in all polymer solar cells

Organic solar cells(OSCs) especially non-fullerene OSCs(NF-OSCs) are promising to become the next-generation of commercial applications and have received great attention from many researchers due to their typical advantages of low cost,light weight,and flexibility [1,2].

Experimental research and energy analysis of a new type of dry ice powder pneumatic rock breaking technology

When the traditional drill and blast method is applied to rock crushing projects,it has strong vibration,loud noise and dust pollution,so it cannot be used in densely populated areas such as urban public works.We developed a supercritical CO_(2)true triaxial pneumatic rock-breaking experimental system,and conducted laboratory and field tests of dry ice powder pneumatic rock-breaking.The characteristics of the blast-induced vibration velocity waveform and the evolution of the vibration velocity and frequency with the focal distance were analyzed and discussed.The fracturing mechanism of dry ice powder pneumatic rock breaking is studied.The research results show that:(1)The vibration velocity induced by dry ice powder pneumatic rock breaking decays as a power function with the increase of the focal distance;(2)The vibration frequency caused by dry ice powder pneumatic rock breaking is mainly distributed in 1–120 Hz.Due to the dispersion effect,the dominant frequency of 10–30 Hz appears abnormally attenuated;(3)The traditional CO_(2)phase change fracturing energy calculation formula is also applicable to dry ice pneumatic rock breaking technology,and the trinitrotoluene(TNT)equivalent of fracturing energy is applicable to the Sadovsky formula;(4)Dry ice powder pneumatic rock breaking is shock wave and highenergy gas acting together to fracture rock,which can be divided into three stages,among which the gas wedge action of high-energy gas plays a dominant role in rock mass damage.

Comparative Study of the Rock-breaking Mechanism of a Disc Cutter and Wedge Tooth Cutter by Discrete Element Modelling

The operation of a shield tunnel boring machine(TBM)in a high-strength hard rock stratum results in significant cutter damage,adversely affecting the thrust and torque of the cutter head.Therefore,it is very important to carry out the research on the stress characteristics and optimize the cutter parameters of cutters break high-strength hard rock.In this paper,the rock-breaking performance of cutters in an andesite stratum in the tunnel of Qingdao Metro Line No.8 was investigated using the discrete element method and theoretical analysis.The rock-breaking processes of a disc cutter and wedge tooth cutter were simulated by software particle flow code PFC^(3D),and the rock-breaking degree,stress of the cutter,and rock-breaking specific energy were analyzed.The rock damage caused by the cutter in a specific section was divided into three stages:the advanced influence,crushing,and stabilizing stages.The rock-breaking degree and the tangential and normal forces of the wedge tooth cutter are larger than that of the disc cutter under the same conditions.The disc cutter(wedge tooth cutter)has the highest rock-breaking efficiency at a cutter spacing of 100 mm(110 mm)and a penetration depth of 8 mm(10 mm),and the rock-breaking specific energy is 11.48 MJ/m^(3)(12.05 MJ/m^(3)).Therefore,two types of cutters with different penetration depths or cutter spacing should be considered.The number of teeth of wedge tooth cutters can be increased in hard strata to improve the rock-breaking efficiency of the shield.The research results provide a reference for shield cutterhead selection and cutter layout in similar projects.

Rock breaking performance of the newly proposed unsubmerged cavitating abrasive waterjet

To improve the rock breaking ability, cavitating waterjet and abrasive waterjet are combined by using a coaxial low-speed waterjet generated around the periphery of a high-speed abrasive waterjet, and a new type of waterjet called unsubmerged cavitating abrasive waterjet(UCAWJ) is thus produced. The rock breaking performance of UCAWJ was compared with submerged cavitating abrasive waterjet(SCAWJ)and unsubmerged abrasive waterjet(UAWJ) by impinging sandstone specimens. Moreover, the effects of jet pressure, standoff distance, abrasive flow rate and concentration were studied by evaluating the specific energy consumption, and the area, depth, and mass loss of the eroded specimen. The results show that the artificially generated submerged environment in UCAWJ is able to enhance the rock breaking performance under the same operating parameters. Furthermore, the rock breaking performance of UCAWJ is much better at higher jet pressures and smaller standoff distances when compared with UAWJ. The greatest rock breaking ability of UCAWJ appears at jet pressure of 50 MPa and standoff distance of 32 mm, with the mass loss of sandstone increased by 370.6% and the energy dissipation decreased by 75.8%. In addition, under the experimental conditions the optimal abrasive flow rate and concentration are 76.5 m L/min and 3%, respectively.

China’s import expo yields record-breaking deals, boosts global economy

The sixth China International Import Expo(CIIE),the world’s first national-level import-themed expo,saw a total of 78.41 billion U.S.dollars’worth of tentative deals reached for one-year purchases of goods and services,setting a record high.

Across two phylogeographic breaks: Quaternary evolutionary history of a mountain aspen (Populus rotundifolia) in the Hengduan Mountains

Biogeographical barriers to gene flow are central to plant phylogeography.In East Asia,plant distribution is greatly influenced by two phylogeographic breaks,the Mekong-Salween Divide and Tanaka-Kaiyong Line,however,few studies have investigated how these barriers affect the genetic diversity of species that are distributed across both.Here we used 14 microsatellite loci and four chloroplast DNA fragments to examine genetic diversity and distribution patterns of 49 populations of Populus rotundifolia,a species that spans both the Mekong-Salween Divide and the Tanaka-Kaiyong Line in southwestern China.Demographic and migration hypotheses were tested using coalescent-based approaches.Limited historical gene flow was observed between the western and eastern groups of P.rotundifolia,but substantial flow occurred across both the Mekong-Salween Divide and Tanaka-Kaiyong Line,manifesting in clear admixture and high genetic diversity in the central group.Wind-borne pollen and seeds may have facilitated the dispersal of P.rotundifolia following prevalent northwest winds in the spring.We also found that the Hengduan Mountains,where multiple genetic barriers were detected,acted on the whole as a barrier between the western and eastern groups of P.rotundifolia.Ecological niche modeling suggested that P.rotundifolia has undergone range expansion since the last glacial maximum,and demographic reconstruction indicated an earlier population expansion around 600 Ka.The phylogeographic pattern of P.rotundifolia reflects the interplay of biological traits,wind patterns,barriers,niche differentiation,and Quaternary climate history.This study emphasizes the need for multiple lines of evidence in understanding the Quaternary evolution of plants in topographically complex areas.

Generating highly active oxide-phosphide heterostructure through interfacial engineering to break the energy scaling relation toward urea-assisted natural seawater electrolysis

Urea-assisted natural seawater electrolysis is an emerging technology that is effective for grid-scale carbon-neutral hydrogen mass production yet challenging.Circumventing scaling relations is an effective strategy to break through the bottleneck of natural seawater splitting.Herein,by DFT calculation,we demonstrated that the interface boundaries between Ni_(2)P and MoO_(2) play an essential role in the selfrelaxation of the Ni-O interfacial bond,effectively modulating a coordination number of intermediates to control independently their adsorption-free energy,thus circumventing the adsorption-energy scaling relation.Following this conceptual model,a well-defined 3D F-doped Ni_(2)P-MoO_(2) heterostructure microrod array was rationally designed via an interfacial engineering strategy toward urea-assisted natural seawater electrolysis.As a result,the F-Ni_(2)P-MoO_(2) exhibits eminently active and durable bifunctional catalysts for both HER and OER in acid,alkaline,and alkaline sea water-based electrolytes.By in-situ analysis,we found that a thin amorphous layer of NiOOH,which is evolved from the Ni_(2)P during anodic reaction,is real catalytic active sites for the OER and UOR processes.Remarkable,such electrode-assembled urea-assisted natural seawater electrolyzer requires low voltages of 1.29 and 1.75 V to drive 10 and600 mA cm^(-2)and demonstrates superior durability by operating continuously for 100 h at 100 mA cm^(-2),beyond commercial Pt/C||RuO_(2) and most previous reports.

Impacts of monsoon break events in the western North Pacific on the cross-equatorial flows over the Maritime Continent

本文利用ERA5逐日再分析资料,探讨了1979-2020年间西北太平洋季风中断事件对海洋性大陆越赤道气流的影响.合成结果表明,西北太平洋季风中断事件会造成高,低空越赤道气流减弱,即高层南风异常,低层北风异常,与此相关的环流异常表现为西北太平洋高层气旋,低层反气旋的斜压结构。特别的是,西北太平洋季风中断对高空越赤道气流的影响更为显著,92%的季风中断事件都导致高空越赤道气流减弱,而只有70%的事件造成低空越赤道气流减弱,这是由于低空越赤道气流同时还受到赤道中东太平洋海温异常的调控.

Numerical Simulation of Dam-Break Flows Using Radial Basis Functions: Application to Urban Flood Inundation

Dam-break flows pose significant threats to urban areas due to their potential for causing rapid and extensive flooding. Traditional numerical methods for simulating these events struggle with complex urban landscapes. This paper presents an alternative approach using Radial Basis Functions to simulate dam-break flows and their impact on urban flood inundation. The proposed method adapts a new strategy based on Particle Swarm Optimization for variable shape parameter selection on meshfree formulation to enhance the numerical stability and convergence of the simulation. The method’s accuracy and efficiency are demonstrated through numerical experiments, including well-known partial and circular dam-break problems and an idealized city with a single building, highlighting its potential as a valuable tool for urban flood risk management.

Study on Characters of Hard Seeds of Amphicarpaea edgeworthii Benth. (Leguminosae) and Methods for Breaking Dormancy

[Objective] This study aimed to understand the characters of hard seeds of Amphicarpaea edgeworthii Benth. （Leguminosae） and explore the methods for break- ing dormancy. [Method] For both aerial and subterranean seeds of A. edgeworthii, the morphological characteristics were observed and the appropriate temperature for germination was explored. For aerial seeds of A. edgeworthii, the characters of hard seeds were studied, and concentrated sulfuric acid treatment, hot water soak treat- ment and mechanical damage treatment were compared to explore the methods for breaking seed dormancy. [Result] The aerial seeds were oblate and averaged 3.38 mm in length, 3.02 mm in width, 1.88 mm in thickness, 15.32 g in thousand grain weight, with a hard seed rate after of up to 98% natural maturation. The subter- ranean seeds were approximately oblate with a maximum diameter of 15 mm and a hundred grain weight of （50.08-58.26 g）; among all the treatments for breaking hardseededness, cutting seed coat treatment and concentrated sulfuric acid treatment for 20 minutes were the most effective methods, whereas hot water soak treatment was the least effective method; constant temperature between 20 and 30 ℃ was optimum for the germination of aerial seeds, and alternative temperature of 30/20 ℃ was most appropriate for the germination of subterranean seeds. [Conclusion] Cutting seed coat treatment and concentrated sulfuric acid treatment for 20 minutes were the most effective methods to break the hardseededness of A. edgeworthii.

WAVE TRANSFORMATION AND BREAKING OVER A RECTANGULAR STEP

An idealized numerical wave flume has been established by finite element method on the bases of Navier Stokes equations through prescribing the appropriate boundary conditions for the open boundary,incident boundary,free surface and solid boundary in this paper.The characteristics of waves propagating over a step have been investigated by this numerical model.The breaker wave height is determined depending on the kinetic criterion.The numerical model is verified by laboratory experiments,and the empirical formula for the damping of wave height due to breaking is also given by experiments.

增强上肢力量对提高街舞的重要性研究——breaking舞种

根据调查没有接受过或者自发进行上肢力量锻炼的人群中有95%以上认为breaking中的难度动作很难完成,其难度动作中较为基础简单的动作都完成的很吃力,但是经过上肢力量锻炼的人群中有87%以上认为breaking中的难度动作相对比较容易,自己练习起来比较容易,控制能力明显比没有经过锻炼的人群要强很多,能正确地发力。

Dynamic Response Behaviors of Upright Breakwaters Under Breaking Wave Impact

The dynamic response behaviors of upright breakwaters under broken wave impact are analysed based on the mass-damper-spring dynamic system model. The effects of the mass, damping, stiffness, natural period, and impulse duration (or oscillation period) on the translation, rotation, sliding force, overturning moment, and corresponding dynamic amplifying factors are studied. It is concluded that the ampli-ying factors only depend on the ratio of the system natural period to impulse duration (or oscillation period) under a certain damping ratio. Moreover, the equivalent static approach to breakwater design is also discussed.

Physical Investigation of Directional Wave Focusing and Breaking Waves in Wave Basin

An experimental scheme for the generation of directional focusing waves in a wave basin is established in this paper. The effects of the directional range, frequency width and center frequency on the wave focusing are studied. The distribution of maximum amplitude and the evolution of time series and spectra during wave packet propagation and the variation of water surface parameters are extensively investigated. The results reveal that the characteristics of focusing waves are significantly influenced by wave directionality and that the breaking criteria for directional waves are distinctly different from those for unidirectional waves.

Numerical Simulation of Spatial Lag Between Wave Breaking Point and Location of Maximum Wave-Induced Current

A quasi three-dimensional numerical model of wave-driven coastal currents with the effects of surface rollers is developed for the study of the spatial lag between the location of the maximum wave-induced current and the wave breaking point. The governing equations are derived from Navier-Stokes equations and solved by the hybrid method combining the fractional step finite different method in the horizontal plane with a Galerkin finite element method in the vertical direc- tion. The surface rollers effects are considered through incorporating the creation and evolution of the roller area into the free surface shear stress. An energy equation facilitates the computation process which transfers the wave breaking energy dissipation to the surface roller energy. The wave driver model is a phase-averaged wave model based on the wave action balance equation. Two sets of laboratory experiments producing breaking waves that generated longshore currents on a planar beach am used to evaluate the model＇s performance. The present wave-driven coastal current model with the roller effect in the surface shear stress term can produce satisfactory results by increasing the wave-induced nearshore current velocity inside the surf zone and shifting the location of the maximum longshore current velocity landward.

Microwave backscattering from the sea surface with breaking waves

Based on the effective medium approximation theory of composites, the whitecap-covered sea surface is treated as a medium layer of dense seawater droplets and air. Two electromagnetic scattering models of randomly rough surface are applied to the investigation of microwave backscattering of breaking waves driven by strong wind. The shapes of seawater droplets are considered by calculating the effective dielectric constant of the whitecap layer. The responses of seawater droplets shapes, such as sphere and ellipsoid, to the backscattering coefficient are discussed. Numerical results of the models are in good agreement with the experimental measurements of horizontally and vertically polarized backscattering at microwave frequency 13.9GHz and different incidence angles.