Effect of Water Washing Pre-treatment on the Properties of Glass-ceramics from Incinerator Fly Ash Using Electronic Arc Furnace

Production of glass-ceramics by sintering the molten slag obtained from electric arc furnace treatment of fly ash was investigated. The effect of washing pretreatment prior to melting the fly ash on the microstructure and properties of the glass-ceramics was examined. The results show that washing pretreatment of fly ash can decrease alkali metal chloride and increase network former in fly ash, which results in the increase of peak crystallization temperature of parent glass and strengthening of properties of bending strength and chemical stability of the glass-ceramics. The optimal heat treatment temperature for parent glass of washed fly ash is 1 173 K, at which the crystalline phase of glass-ceramics is composed of gelignite （Ca2A12SiO7） and akermanite （Ca2MgSi207）. Glass-ceramics produced at optimal heat treatment temperature are excellent in term of the physical and chemical properties and leaching characteristics, indicating attractive potential as substitute of nature materials.

Method Development and Validation of the Simultaneous Analysis of Methylisothiazolinone, Methylchloroisothiazolinone, Benzisothiazolinone and Bronopol in Washing-Up Liquid

A method of analysis for the simultaneous determination of methylisothiazolinone (MI), methylchloroisothiazolinone (CMI), benzisothiazolinone (BIT) and Bronopol (BNP) in washing-up liquid was established. The method consisted of a gradient HPLC analysis at three different wavelengths. The four compounds could be analyzed with good precision and accuracy.

Effects of thrombopoietin pre-treatment on peri-liver transplantation thrombocytopenia in a mouse model of cirrhosis with hypersplenism

BACKGROUND During cirrhosis,the liver is impaired and unable to synthesize and clear thrombopoietin properly.At the same time,the spleen assumes the function of hemofiltration and storage due to liver dysfunction,resulting in hypersplenism and excessive removal of platelets in the spleen,further reducing platelet count.When liver function is decompensated in cirrhotic patients,the decrease of thrombopoietin(TPO)synthesis is the main reason for the decrease of new platelet production.This change of TPO leads to thrombocytopenia and bleeding tendency in cirrhotic patients with hypersplenism.AIM To investigate the clinical efficacy of recombinant human TPO(rhTPO)in the treatment of perioperative thrombocytopenia during liver transplantation in cirrhotic mice with hypersplenism.METHODS C57BL/6J mice and TPO receptor-deficient mice were used to establish models of cirrhosis with hypersplenism.Subsequently,these mice underwent orthotopic liver transplantation(OLT).The mice in the experimental group were given rhTPO treatment for 3 consecutive days before surgery and 5 consecutive days after surgery,while the mice in the control group received the same dose of saline at the same frequency.Differences in liver function and platelet counts were determined between the experimental and control groups.Enzyme-linked immunosorbent assay was used to assess the expression of TPO and TPO receptor(c-Mpl)in the blood.RESULTS Preoperative administration of rhTPO significantly improved peri-OLT thrombocytopenia in mice with cirrhosis and hypersplenism.Blocking the expression of TPO receptors exacerbated peri-OLT thrombocytopenia.The concentration of TPO decreased while the concentration of c-Mpl increased in compensation in the mouse model of cirrhosis with hypersplenism.TPO pre-treatment significantly increased the postoperative TPO concentration in mice,which in turn led to a decrease in the c-Mpl concentration.TPO pre-treatment also significantly enhanced the Janus kinase(Jak)/signal transducers and activators of transcription pathway protein expressions in bone marrow stem cells of the C57BL/6J mice.Moreover,the administration of TPO,both before and after surgery,regulated the levels of biochemical indicators,such as alanine aminotransferase,alkaline phosphatase,and aspartate aminotransferase in the C57BL/6J mice.CONCLUSION Pre-treatment with TPO not only exhibited therapeutic effects on perioperative thrombocytopenia in the mice with cirrhosis and hypersplenism,who underwent liver transplantation but also significantly enhanced the perioperative liver function.

Orientational Separation of Sulfur in Petroleum Coke by Alkali Calcining and Reflux Washing

The application of high-sulfur petroleum coke after desulfurization in aluminum electrolysis anodes is an important development trend. However, removing sulfur from high-sulfur petroleum coke is still a significant challenge.This study proposes alkali calcining and reflux washing to examine the impacts of temperature, particle size, the mass ratio of Na_(2)CO_(3) to NaOH, and total sodium addition on the desulfurization efficiency and mechanism. The results show that the desulfurization rate increases with increasing temperature, increasing total sodium content, and decreasing particle size. The addition of alkali can significantly reduce the opening-ring reaction temperature of thiophene and convert organic sulfur into inorganic sulfur(Na_(2)S). Three washing methods were compared, and reflux washing was selected to separate inorganic sulfur(Na_(2)S) from calcined petroleum coke. The sulfur content in petroleum coke decreased from 7.29% to 1.90%, with a desulfurization rate of 80.13% under optimal conditions. The petroleum coke was analyzed before and after desulfurization using X-Ray diffraction(XRD), Scanning Electron Microscopy(SEM), Infrared Spectroscopy(IR), Thermogravimetric Analysis and Differential Scanning Calorimetry(TG-DSC), Gaschromatography-mass Spectrometry(GC-MS). The results show that thiophene and benzothiophene in petroleum coke are decomposed and converted into octane and ethyl cyclohexane. These new observations are expected to provide further understanding and guidance for the utilization of highsulfur petroleum coke.

Discussion on the Treatment of Palmoplantar Keratosis by TCM Soaking and Washing

By combing the mechanism and advantages of traditional Chinese medicine(TCM)soaking and washing and combining TCM syndrome differentiation with western medicine differentiation of diseases,guided by the view that"the principle of external treatment is that of internal treatment",this article discusses the differentiation and treatment ideas of palmoplantar keratosis by TCM soaking and washing,which will provide a reference for clinical treatment.

High corrosion resistance of electroless Ni-P with chromium-free conversion pre-treatments on AZ91D magnesium alloy

Phosphate-manganese, tannic acid and vanadium conversion coatings were proposed as an effective pre-treatment layer between electroless Ni-P coating and AZ91D magnesium alloy substrate to replace the traditional chromate plus HF pre-treatment. The electrochemical results show that the chrome-free coatings plus electroless Ni-P coating on the magnesium alloy has the lowest corrosion current density and most positive corrosion potential compared with chromate plus electroless Ni-P coating on the magnesium alloy. These proposed pre-treatment layers on the substrate reduce the corrosion of magnesium during plating process, and reduce the potential difference between the matrix and the second phase. Thus, an electroless Ni-P coating with fine crystalline and dense structure was obtained, with preferential phosphorus content, low porosity, good corrosion-resistance and strengthened adhesion than the chromate plus electroless Ni-P.

Coal washing scenario in India and future prospects

Coal Washing Exploration in India dates back to 1900s; though, first coking coal washeries in India were installed after independence. At present, most of the coking coal washeries are owned by Public Sector Companies; whereas, most of the non-coking coal washeries are owned by Private Sector. Even after six decades of coal washing practices, there has not been significant development in the coal washing intelligentsia. Indian Coal Washing industry is still dependent on imported equipment, which has been designed to treat coal that is significantly different from Indian coal of drift origin. In this paper, authors have ventured into evolution of Indian Coal Washing Industry （with a focus on coking coal washing sector）, its present condition and future prospect for growth. The paper emphasizes need for developing indigenous solutions to industrial challenges and highlights importance of increased coordination among academia-research institutions and coal industry.

Efficient Extraction of Astaxanthin from Phaffia rhodozyma with Polar and Non-polar Solvents after Acid Washing

method of extracting astaxanthin from Phaffia rhodozyma with various solvents after acid washing was investigated. The extraction efficiency was distinctly increased after acid washing of P. rhodozyma cells. When the concentration of HCl was 0.4 mol.L^-1, the highest extraction efficiency of astaxanthin was achieved which was about three times higher than the control. Acetone or benzene as single polar or non-polar solvent was the most ef- fective solvent in our research. With a combination of isopropanol and n-hexane （volume ratio of 2 ： 1）, the maxi- mal extraction efficiency was achieved, approximately 60% higher than that obtained with a single solvent. The liquid-solid ratio and the extracting time were also optimized. Under the optimum extraction conditions, the extraction yield of astaxanthin exceeded 98%.

Comparison of pre-treatment and post-treatment use of selenium in retinal ischemia reperfusion injury

AIM: To investigate the effects of selenium in rat retinal ischemia reperfusion(IR) model and compare pretreatment and post-treatment use.METHODS: Selenium pre-treatment group(n =8) was treated with intraperitoneal(i.p.) selenium 0.5 mg/kg for7 d and terminated 24 h after the IR injury. Selenium posttreatment group( n = 8) was treated with i. p. selenium0.5 mg/kg for 7d after the IR injury with termination at the end of the 7d period. Sham group(n =8) received i.p.saline injections identical to the selenium volume for 7d with termination 24 h after the IR injury. Control group(n =8) received no intervention. Main outcome measures were retina superoxide dismutase(SOD), glutathione(GSH),total antioxidant status(TAS), malondialdehyde(MDA),DNA fragmentation levels, and immunohistological apoptosis evaluation.RESULTS: Compared to the Sham group, selenium pre-treatment had a statistical difference in all parameters except SOD. Post-treatment selenium also resulted in statistical differences in all parameters except the MDA levels. When comparing selenium groups, the pre-treatment selenium group had a statistically higher success in reduction of markers of cell damage such as MDA and DNA fragmentation. In contrast, the post-selenium treatment group had resulted in statisticallyhigher levels of GSH. Histologically both selenium groups succeeded to limit retinal thickening and apoptosis. Pre-treatment use was statistically more successful in decreasing apoptosis in ganglion cell layer compared to post-treatment use.CONCLUSION: Selenium was successful in retinal protection in IR injuries. Pre-treatment efficacy was superior in terms of prevention of tissue damage and apoptosis.

Effect of Cross-flow Velocity on the Critical Flux of Ceramic Membrane Filtration as a Pre-treatment for Seawater Desalination

Pre-treatment, which supplies a stable, high-quality feed for reverse osmosis （RO） membranes, is a criti- cal step for successful operation in a seawater reverse osmosis plant. In this study, ceramic membrane systems were employed as pre-treatment for seawater desalination. A laboratory experiment was performed to investigate the effect of the cross-flow velocity on the critical flux and consequently to optimize the permeate flux. Then a pilot test was performed to investigate the long-term performance. The result shows that there is no significant effect of the cross-flow velocity on the critical flux when the cross-flow velocity varies in laminar flow region only or in turbulent flow region only, but the effect is distinct when the cross-flow velocity varies in the transition region. The membrane fouling is slight at the permeate flux of 150 L·m^-2·h^-1 and the system is stable, producing a high-quality feed （the turbidity and silt density index are less than 0.1 NTU and 3.0, respectively） for RO to run for 2922.4 h without chemical cleaning. Thus the ceramic membranes are suitable to filtrate seawater as the pre-treatment for RO.

CO_2 Removal from Biogas by Water Washing System

CO2 removal from biogas by water washing system was investigated with various parameters, including liquid/ gas ratio, pressure, temperature, and CO2 content. The results indicate that CO2 removal ratio could reach 34.6%- 94.2% as liquid/gas ratio increased from 0.14 to 0.50. Increasing pressure （from 0.8 to 1.2 MPa） could improve gas purification with a constant inflow rate of gas. Temperature played a key role in the process and lower temper- ature in absorption tower was beneficial for reducing CO2 content. CO2 removal ratio could reach 24.4%-83.2% when CO2 content in the simulated gas was 25%-45%. The lowest CO2 content after absorption was 2.6% at 1.2 MPa with 400 L·h-1 gas flow and 200 L·h-1 water flow, which meets the requirement of CO2 content in natural Ras for vehicle fuel.

Application of Electrocoagulation and Electrolysis on the Precipitation of Heavy Metals and Particulate Solids in Washwater from the Soil Washing

Soil washing, ex situ mechanical technique, is one of the few permanent treatment alternatives to remove metal contaminants from soils by employing physical separation based on mineral processing technologies to remove discrete particles or metal-bearing particles and/or chemical extraction based on leaching or dissolving process to extract the metals from the soils into an aqueous solution. However, washwater remained from soil washing process contains discrete particulate particles along with heavy metals as solution phase to be treated separately, as well as this process can produce large amount of sludge that requires further treatment, slow metal precipitation, poor settling, the aggregation of metal precipitates. Electrical treatments including electrocoagulation and electrolysis can be effective in removing these substances from washwater. This paper reviews the theoretical models in applying electrocoagulation and electrolysis to remove heavy metals and discrete particulate particles in washwater by examining and comparing the status of washwater treatment technologies which have been undertaken, mostly in the US and EU for the period 1990-2012.

Effect of microwave pre-treatment on physical quality,bioactive compounds,safety risk factor,and storage stability of peanut butter

Microwave,as a new heat treatment technology,has the characteristics of uniform and fast heating speed.It is an energy-saving technology known for improving oilseed product quality.Its efficiency mainly depends on the roasting power and time.However,the production of high-quality peanut butter using short-time roasting con-ditions are limited.Herein,we determined an appropriate microwave roasting power and time for peanuts and evaluated its impacts on the quality of peanut butter.Different roasting powers(400 W,800 W and 1200 W)and times(4,4.5,5,and 5.5 min)were preliminarily tested.Among them,800 W at 5 min was the most suitable.The roasting efficiency was further evaluated using color,sensory,bioactive compounds,storage stability,and safety risk factors of peanut butter produced from four peanut cultivars(Silihong,Baisha-1016,Yuanza-9102,and Yuhua-9414).The pre-treated butter obtained from three cultivars(Silihong,Yuanza-9102,and Yuhua-9414)with moisture content between 5%and 7.2%had a similar sensory score(6-7)as the commercial on a 9-point hedonic scale compare to the other.The color of the pre-treated peanut butter varies statistically with the commercial but remained in the recommended range of Hunter L*values of 51-52,respectively,for high initial moisture peanut cultivars.The total polyphenol(35.20-31.59±0.59μmol GAE/g)and tocopherol(19.05±0.35 mg/100 g)content in the butter obtained from three cultivars(Yuahua-9102,Yuhua,and Baisha-1016)and Silihong respectively,were significantly(P<0.05)higher than those in the commercial butter.The induction times of all pre-treated butter(19.80±0.99-7.84±0.07 h)were significantly(P<0.05)longer during storage at accelerated temperature than commercial samples.In addition,no benzo[a]pyrene was found in the pre-treated samples.Collectively,the microwave pretreated peanut butter was superior to the commercial one.These findings provided data support and a reference basis to promote microwave use for peanut butter production.

Bronchial Washing to Diagnose Smear-Negative Pulmonary Tuberculosis

Introduction: Bronchoscopy with bronchial washing is useful for the diagnosis of pulmonary tuberculosis (TB) when sputum smears are negative. However, its indication has not been standardized. Therefore, we conducted a retrospective study to assess the diagnostic value of bronchial washing in patients suspected with pulmonary TB. Methodology: A retrospective analysis was performed on patients diagnosed with pulmonary TB in Kosin university gospel hospital, a tertiary hospital with 969 beds in South Korea, from March 2017 to December 2018. We obtained three serial sputum samples for acid-fast bacilli (AFB) smear and culture, and all patients underwent bronchoscopy with bronchial washing for AFB smear and culture. Results: Fifty-six patients were enrolled in the study. Smear-negative pulmonary TB (SNPT) was diagnosed in 42/56 (75%) patients. Among the patients with smear-positive sputum, 14/14 (100%) showed culture-positive sputum, while smear- and culture-positive bronchial washing were seen in 7/14 (50%) and 12/14 (85.7%) patients, respectively. Among the patients with SNPT, 17/42 (40.47%) had culture-negative sputum and were diagnosed using the bronchoscopic washing. Conclusions: For patients with smear-negative sputum, it is necessary to perform bronchoscopic washing to increase the diagnostic rate of pulmonary TB. To control the transmission of pulmonary TB, it is necessary to use a fast and accurate examination method.

Washing effect on properties of Li Ni_(0.8)Co_(0.15)Al_(0.05)O_2 cathode material by ethanol solvent

Different LiNi0.8Co0.15Al0.05O2 cathode materials were washed by ethanol solvent. Inductively coupled plasma atomic emission spectroscopy（ICP-AES）, Fourier transformed infrared（FTIR） spectrum, X-ray diffraction（XRD）, scanning electron microscopy（SEM）, charge-discharge test and electrochemical impedance spectroscopy（EIS） were used to evaluate the elemental contents, structures, morphologies and electrochemical properties of samples. The results show that ethanol washing can remove effectively the synthetic residues LiOH/Li2 O on the freshly-prepared LiNi0.8Co0.15Al0.05O2 and make the sample much more resistant to H2O and CO2, without destroying its bulk structure, surface morphology and electrochemical performances. Moreover, the discharge specific capacity and cycle performance of LiNi0.8Co0.15Al0.05O2 after storage in air with a relative humidity of 80% for three months are improved by immediate ethanol washing.

Washing and Dyeing Wastewater Treatment by Combined Nano Flocculation and Photocatalysis Processes

The research investigated the performance of combined process (flocculation pretreatment-pho- to catalysis). The characteristics of nano flocculation and photocataly were evaluated by simulated dye and surfactant wastewater. In the coagulation and settling period, decolorization rate of five dyes wastewater by nano flocculant was higher than 95%. In the photocatalytic period, degradation of twelve sodium dodecyl benzene sulfonate reached 33%. Washing and dyeing wastewater treated by combined process conformed to the “textile dyeing and finishing industry back to the water quality standard” (FZ/T 01107-2011). The results showed that the combined process was highly advanced treatment for washing and dying wastewater.

Surfactant-Enhanced Washing of Soils Contaminated with Wasted-Automotive Oils and the Quality of the Produced Wastewater

An old automotive industrial site located at Mexico City with many years of operation and contaminated with heavy oil hydrocarbons, particularly spent oils, was assessed for restoration using the surfactant enhanced soil washing (SESW) process. The main goal of this study was to characterize the contaminated soil in terms of TPHs, BTEX, PAHs, and metals contents as well as microbiologically (total heterotrophs and specific degrading microorganisms). We also aimed to determine the surfactant type and concentration to be used in the SESW process for the automotive waste oil contaminated soil. At the end, sixteen kg of contaminated soil were washed and the produced wastewater (approximately 40 L) was characterized in terms of COD, BOD;solids, and other physico-chemical parameters. The soil contained about 14,000 mg of TPH/kg soil (heavy fraction), 0.13 mg/kg of benzo (k) fluoranthene and 0.07 mg/kg of benzo (a) pyrene as well as traces of some metals. Metals concentrations were always under the maximum concentration levels suggested by Mexican regulations. 15 different surfactants were used to identify the one with the capability to achieve the highest TPH removal. Surfactants included 5 anionics, 2 zwitterionic, 5 nonionics and 3 natural gums. Sulfopon 30 at a concentration of 0.5% offered the best surfactant performance. The TPH removals employing the different surfactants were in the range from 38% to 68%, in comparison to the soil washing with water (10% of TPH removal). Once the surfactant was selected, 70 kg of soil were washed and the resulting water contained approximately 1300 mg/L of COD, 385 mg/L of BOD (BOD/COD = 0.29), 122 mg/L of MBAS, and 212 mg/L of oil and greases, among other contaminants.

Investigation of Different Washing Effects on Physical and Mechanical Properties of Cotton Knitted Garments

This paper deals with three types of washing (enzyme, softener, Silicone) effects on 100% cotton Single Jersey T-shirt, Slub Single Jersey T-shirt, Double Lacoste (5% Lycra) Polo shirt, Single jersey CVC (T-shirt) and PC single Jersey (T-shirt). Typical industrial washing procedures and techniques were followed and then physico-mechanical properties were analyzed under standard condition. It is observed that after washing, weight of each garments has increased from 5% to 36%;stitch length of the constituted fabric has decreased from 1% to 10% approximately;CPI has increased 23% for CVC fabric only for enzyme treatment and for other process it has a little bit or no wash effects. Same effects found for WPI except 100% cotton and Double Lacoste. Shrinkage property both for lengthwise and widthwise remains the same except CVC and Double Lacoste knitted garments and spirality has almost unchanged except 100% cotton and slub fabric. Both the dry and wet rubbing properties have improved after any types of wash except 100% cotton on Silicone wash. Water absorbency property has increased;pH of all the samples is under controlled and lies between 4.5 and 5.0. But there is no significant change of colorfastness to wash and stain after these washing treatments.

Isolation of Iron Bacteria from Washing Sludge Filters Kolda (Senegal) Water Treatment Station and Study of the Kinetics of Biological Degradation of the Iron (II)

In the present work, the treatment of synthetic waters doped with iron (II) has been studied. The treatment mechanism used in this study is the biological oxidation which consists, in test tubes, of bringing bacteria isolated on Petri dishes into contact with water containing divalent iron (II). These de-ironing bacteria (non-specific bacteria) are used to carry out laboratory biological oxidation experiments on iron (II) under different pH conditions (pH = 3.4 - 3.6, pH = 7.3 - 7.5 and pH = 9.8 - 10) and variable concentration of iron (II). Biological treatment trials included different concentrations of iron during time intervals of a day. Examination of the elimination kinetics of Iron (II) indicates a removal rate of 59.453% for an initial iron concentration in the synthetic solution of 1 mg&middot;L&minus;1 at basic pH (pH = 9.8 - 10). Therefore, the degradation of divalent iron by this method seems to be quite effective, but it should be noted that biological nitrification is impaired by the presence of high iron concentrations above 5 mg&middot;L&minus;1.

Quantitative assessment and significance of gas washing of oil in Block 9 of the Tahe Oilfield,Tarim Basin,NW China

Some Ordovician and Triassic oils in Block 9 are characterized by light oils,which have distinctly differentiated from heavy oils in other blocks in the Tahe Oilfield,Tarim Basin.Based on the whole oil gas chroma- tograms,this paper estimates the effect of oil migration and fractionation and the amount of depletion(Q)in terms of the n-alkanes depletion model.The results showed that the amount of depletion in the Ordovician reservoir is highest in the east of this block,e.g.the depletion is 97% in Well T904.The amount of Q gets lower to the west,e.g.the depletion is 53.4%in Well T115 and there is no sign of depletion in Well S69.It is suggested that the direction of gas washing is from the east to the west.The compositions and isotopic characteristics of associated gas in Ordovician oils indicated that the gas might be derived from Cambrian source rocks of the Caohu Depression which lies to the east of Block 9.In contrast,no obvious depletion of n-alkanes in Triassic oils was found,suggesting that the migration pathway of natural gas has been limited to the Ordovician karst fracture system formed in the Early Hercynian Orogeny.Different depletions of the Ordovician and Triassic oils can reveal fault activities in this region.