Dispersion characteristics of clayey soils containing waste rubber particles

The rubber-containing waste materials have been widely used to improve the engineering properties of soils in recent years.Among others,granular rubbers are utilized in various ways to increase the bearing capacity and shear strength and to reduce the settlement and liquefaction potential of soils.The granular rubbers have many advantages such as temperature resistance,flexibility,tear-resistance,non-slip,and thermal and electrical insulation.This study presents the distribution characteristics of five different types of clayey soils with different engineering properties containing waste rubber particles(WRPs).On the other hand,determining and controlling the dispersion characteristics of clayey soils is two significant engineering problems.The study aims to solve these two remarkable and problematic issues in an eco-friendly and safe way.The role of WRP treatment in the investigation of soil dispersion behavior,which can cause dangerous problems such as piping,erosion,and dispersion,reflects the original and different perspectives of this study.Within this scope,geotechnical parameters of the clayey soils were determined.Subsequently,pinhole test,crumb test,double hydrometer test,and scanning electron microscopy(SEM)analysis were performed on the Na-activated bentonite,refined ball clay,Ukrainian kaolin,Avanos kaolin,and Afyon clay samples with different percentages of WRPs(0%,5%,10%,and 15%).Consequently,Avanos and Ukrainian kaolin clays gave the most limited response to the dispersion behavior with the addition of WRP.Also,WRP treatment on the ball clay and bentonite samples showed limited efficiency.Afyon clay,which was defined as dispersive by the three tests that determined its dispersion potential,showed 3 level changes in the pinhole tests and 2 level changes in the crumb tests,and gave the most effective results in terms of WRP efficiency.

Workability and Durability of Concrete Incorporating Waste Tire Rubber:A Review

Environmental problems caused by waste tires are becoming increasingly prominent.There is an urgent need to find a green way to dispose of waste tires,and scholars have made considerable efforts in this regard.In the construction industry,rubber extracted from waste tires can be added to concrete to alleviate environmental problems to a certain extent.As a new building material,rubber concrete has superior properties compared to ordinary concrete and has been widely used in many fields.Numerous studies have been conducted worldwide to investigate the effect of waste tire rubber on the performance of concrete.It has been reported that the addition of waste tire rubber has a significant influence on the performance of concrete.Workability influences the hardened performance of rubber concrete,especially the durability.Based on the current research results,the workability and durability of concrete manufactured with waste tire rubber,including water absorption and permeability,carbonation resistance,chloride ion permeability resistance,and freeze-thaw resistance,are summarized in this paper.It is concluded that the addition of waste tires has a negative effect on the workability of concrete.In terms of durability,concrete exhibits better chloride ion penetration resistance and frost resistance,with a higher water absorption rate,and lower anti-permeability and carbonation resistance owing to the addition of waste tire rubber.

Determination of the Sound Absorption Capacity of Hydraulic Concrete Mixtures Added with Waste Tire Rubber

There are different types of pollutants that are harmful to the environment, including smog, chemicals that are dumped into rivers, scrap tires, etc. The latter have the particularity that it is not possible to recycle them to manufacture new tires. In the present work, hydraulic concrete plates added with waste tire rubber were manufactured to modify their sound absorption capacity. It was found that the rubber additions produce changes in the density of the material and in the sound absorption capacity. When the material is exposed to high-frequency sounds that correspond to high-pitched sounds, its absorption capacity increases. On the contrary, when the test frequency is low, that is, bass sounds, the sound absorption capacity decreases. The results obtained in this work suggest that the proposed mixtures are suitable for the possible manufacture of acoustic insulating shields.

Diffusion Kinetics of Components of Asphalt Into Waste Rubber

The use of waste crumb rubber powder as a modifier for modified asphalt can recycle waste rubber to ease pressure on the environment and improve the performance of asphalt. Diffusion of components of asphalt into waste rubber is of vital importance to improve the performance of rubber modified asphalt,while the related researches are scarce. Diffusion of components of asphalt into waste rubber at different temperatures has been investigated in this work. Rectangle rubber was immersed in asphalt at certain temperature for a period of time. And the mass increment of rubber was measured to determine the diffusion rate of components of asphalt into rubber. The experimental results indicated that the diffusion rate of components of asphalt into waste rubber increases along the temperature,but the diffusion rate of components of fractions oil which is distillated from catalytic cracking slurry is much higher than that of components of asphalt. Compared with asphalt,fractions oil enjoys lower viscosity and better permeability with higher content of saturates and aromatics. All the characteristics are contributed to the efficient diffusion of components of fractions into waste rubber.

Mechanical Test and Meso-Model Numerical Study of Composite Rubber Concrete under Salt-Freezing Cycle

A composite rubber concrete(CRC)was designed by combining waste tire rubber particles with particle sizes of 3~5 mm,1~3 mm and 20 mesh.Taking the rubber content of different particle sizes as the influencing factors,the range and variance analysis of the mechanical and impermeability properties of CRC was carried out by orthogonal test.Through analysis,it is concluded that the optimal proportion of 3~5 mm,1~3 mm,and 20 mesh particle size composite rubber is 1:2.5:5.5 kinds of CRC and 3 kinds of ordinary single-mixed rubber concrete(RC)with a total content of 10%~20%were designed under this ratio,and the salt-freezing cycle test was carried out with a concentration of 5%Na 2 SO4 solution.The physical and mechanical damage laws during 120 salt-freezing cycles are obtained,and the corresponding damage prediction model is established according to the experimental data.The results show that:on the one hand,the composite rubber in CRC produces a more uniform“graded”structure,forms a retractable particle group,and reduces the loss of mechanical properties of CRC.On the other hand,colloidal particles with different particle sizes are used as air entraining agent to improve the pore structure of concrete and introduce evenly dispersed bubbles,which fundamentally improves the durability of concrete.Under the experimental conditions,the CRC performance is the best when the overall content of composite rubber is 15%.

Sustainable Practice in Pavement Engineering through Value-Added Collective Recycling of Waste Plastic and Waste Tyre Rubber

Waste plastics,such as waste polyethylene terephthalate(PET)beverage bottles and waste rubber tyres are major municipal solid wastes,which may lead to various environmental problems if they are not appropriately recycled.In this study,the feasibility of collectively recycling the two types of waste into performance-increasing modifiers for asphalt pavements was analyzed.This study aimed to investigate the recycling mechanisms of waste PET-derived additives under the treatment of two amines,triethylenetetramine(TETA)and ethanolamine(EA),and characterize the performances of these additives in modifying rubberized bitumen,a bitumen modified by waste tyre rubber.To this end,infrared spectroscopy and thermal analyses were carried out on the two PET-derived additives(PET–TETA and PET–EA).In addition,infrared spectroscopy,viscosity,dynamic shear rheology,and multiple stress creep recovery tests were performed on the rubberized bitumen samples modified by the two PET-derived additives.We concluded that waste PET can be chemically upcycled into functional additives,which can increase the overall performance of the rubberized bitumen.The recycling method developed in this study not only helps alleviate the landfilling problems of both waste PET plastic and scrap tyres,but also turns these wastes into value-added new materials for building durable pavements.

Rheological properties and microscopic mechanism of waste cooking oil activated waste crumb rubber modified asphalt

In this paper,the surface activated crumb rubber with waste cooking oil(WCO)was studied to improve the performance of crumb rubber modified asphalt.The activated waste crumb rubber modified asphalt(OCRMA)with different amount of crumb rubber was prepared to study the microscopic appearance of OCRMA by scanning electron microscope and fluorescence microscope and analyze the surface performance.The rheological properties and microscopic mechanism of OCRMA were characterized by dynamic shear rheological test,multiple stress creep recovery(MSCR)test,BBR test and infrared spectroscopy.The results show that the dissolution degree of waste crumb rubber is improved after WCO activation,and the compatibility with asphalt components is enhanced,and the stable cross-linking structure is formed,which improves the asphalt performance.The several new absorption peaks,which were obvious,were all caused by the composition of WCO,that is,there was no significant chemical change during the interaction between the activated crumb rubber and base asphalt.Compared with the common waste crumb rubber modified asphalt(CRMA),activation with WCO can significantly reduce the viscosity of CRMA,decrease the difference of segregation softening point by 27%,and enhance the low temperature performance by 30%.The aging degree is greatly reduced,and the anti-aging performance of OCRMA is increased by about 20%with the same dosage.The high temperature performance,though higher than that of base asphalt,decreases to some extent.After comprehensive analysis,the optimal dosage of crumb rubber for OCRMA is 30%.

Study of the Properties of Polyurethane-waste Rubber Granulate Composites

1 Results The production of rubber is very high and rises every year. Among other things it is directly connected with the growth of car production. Therefore, the processing of waste rubber and its management must be treated as a global problem. Used rubber may replace conventional fuel and, owing to its low price, can improve the economic effectiveness of combustion. Energy recovery by combustion of car tyres allows for rapid management of rubber waste. However, it is well-known that all kinds of wast...

Advances in Aging and Anti-Aging Research on Rubber-Modified Asphalt and Asphalt Mixtures

Waste rubber-modified asphalt has good anti-aging properties and can significantly improve the service life of asphalt pavements. For domestic and foreign scholars of rubber modified asphalt thermal oxygen aging, photo-oxidative aging and water aging some behavioural research, and rubber asphalt aging after the characteristics of the research progress are reviewed. Especially rubber-modified asphalt after light, water and other multi-factor agingsituations, the aging situation is more serious, for rubber-modified asphalt mixture aging, rubber asphalt anti-aging process research and analysis means are still very few, the future research must have more thinking.

Effect of Rubber Particle Modifi cation on Properties of Rubberized Concrete

To improve the combination of cement matrix and waste tire rubber particles in concrete, the rubber particles were treated with acrylic acid（ACA） and polyethylene glycol（PEG） for grafting hydrophilic groups on their surfaces. The X-Ray photoelectron spectroscopy（XPS） and surface contact angle were used to characterize the hydrophilicity and surface functional group of rubber particles. The effect of rubber particle modifi cation on fresh/hardened properties of rubberized concrete was studied. The experimental results show that the contact angle between rubber particle surface and water decreases when rubber particle is modifi ed. Compared with the unmodifi ed rubberized concrete（RC）, the unit weight of modifi ed rubberized concrete（MRC） changes slightly. However, the slump, air-entrainment, compressive strength, flexural strength, and impact performance of MRC are obviously improved. Under good condition of slump, the water-cement ratio of the MRC can be reduced from 0.4 to 0.38. And the compressive strength and fl exural strength of the MRC（10% rubber particle content） can be increased by 25.9% and 26.4%, respectively.

Waste Tire Rubber-based Refrigerants for Solid-state Cooling Devices

Management of discarded tires is a compelling environmental issue worldwide.Although there are several approaches developed to recycle waste tire rubbers,their application in solid-state cooling is still unexplored.Considering the high barocaloric potential verified for elastomers,the use of waste tire rubber(WTR)as a refrigerant in solid-state cooling devices is very promising.Herein,we investigated the barocaloric effects in WTR and polymer blends made of vulcanized natural rubber(VNR)and WTR,to evaluate its feasibility for solid-state cooling technologies.The adiabatic temperature changes and the isothermal entropy changes reach giant values,as well as the performance parameters,being comparable or even better than most barocaloric materials in literature.Moreover,pure WTR and WTR-based samples also present a faster thermal exchange than VNR,consisting of an additional advantage of using these discarded materials.Thus,the present findings evidence the encouraging perspectives of employing waste rubbers in solid-state cooling based on barocaloric effects,contributing to both the recycling of polymers and the sustainable energy technology field.

Review on laboratory preparation processes of polymer modified asphalt binder

Several previous studies have documented the progress in polymer modified asphalt binder with respect to materials'types and properties.However,limited or no effort was made to document findings on the laboratory preparation practices of polymer modified asphalt binder.Full and clear disclosure of asphalt blend preparation method is necessary for research continuity,reproducibility,and accurate adaptation by future studies for analogy and reliable conclusions.The laboratory preparation processes of various modified asphalt binders have been reviewed in this study.Factors affecting the optimal mixing of asphalt-polymer blends were summarized.The optimal mixing conditions associated with different asphalt modifiers were documented.Gap in the literature on the current practice for the preparation and reporting of various modified asphalt binder was discussed.Modifiers include styrene butadiene styrene(SBS),polyethylene(PE),waste tire rubber or crumb rubber(CR),ethylene vinyl acetate(EVA),sulfur,polyphosphoric acid(PPA),epoxy,polyurethane,nano-materials,etc.Currently,there is lack of modern innovative approached in the preparation of modified asphalt towards better performance.There is no clear standardized definition of term associated with asphalt binder preparation process.Given the limited and common types of polymers utilized for the modification of asphalt binder,it is possible to standardize the mixing procedure for several polymers.Doing so could ease research continuity and facilitates accurate comparison of new studies with earlier ones.

Mechanism insight into the formation of H_(2)S from thiophene pyrolysis: A theoretical study

Pyrolysis is an efficient and economical method for the utilization of waste rubber,but the high sulfur content limits its industrial application.Currently,the migration and transformation of the element S during pyrolysis of waste rubber is far from well known.In this work,a density functional theory(DFT)method was employed to explore the possible formation pathways of H_(2)S and its precursors(radicals HS·and S·)during the pyrolysis of thiophene,which is an important primary pyrolytic product of rubber.In particular,the influence of reactive hydrogen radicals was carefully investigated in the thiophene pyrolysis process.The calculation results indicate that the decomposition of thiophene tends to be initiated by hydrogen transfer between adjacent carbon atoms,which needs to overcome an energy barrier of 312.4 kJ/mol.The optimal pathway to generate H_(2)S in thiophene pyrolysis involves initial H migration and S-C bond cleavage,with an overall energy barrier of 525.8 kJ/mol.In addition,a thiol intermediate that bears unsaturated C-C bonds is essential for thiophene pyrolysis to generate H_(2)S,which exists in multiple critical reaction pathways.Moreover,the presence of hydrogen radicals significantly changes the decomposition patterns and reduces the energy barriers for thiophene decomposition,thus promoting the formation of H_(2)S.The current work on H_(2)S formation from thiophene can provide some theoretical support to explore clean utilization technologies for waste rubber.