Gas injection is the second largest enhanced oil recovery process, next only to the thermal method used in heavy oil fields. To increase the extent of the reservoir contacted by the injected gas, the gas is generally ...Gas injection is the second largest enhanced oil recovery process, next only to the thermal method used in heavy oil fields. To increase the extent of the reservoir contacted by the injected gas, the gas is generally injected intermittently with water. This mode of injection is called water-alternating-gas (WAG). This study deals with a new immiscible water alternating gas (IWAG) EOR technique, “hot IWAG” which includes combination of thermal, solvent and sweep techniques. In the proposed method CO2 will be superheated above the reservoir temperature and instead of normal temperature water, hot water will be used. Hot CO2 and hot water will be alternatively injected into the sand packs. A laboratory test was conducted on the fractured and conventional sand packs. Slugs of water and CO2 with a low and constant rate were injected into the sand packs alternatively; slug size was 0.05 PV. Recovery from each sand pack was monitored and after that hot water and hot CO2 were injected alternatively under the same conditions and increased oil recovery from each sand pack and breakthrough were measured. Experimental results showed that the injection of hot WAG could significantly recover residual oil after WAG injection in conventional and fractured sand packs.展开更多
CO2 flooding is a process whereby carbon dioxide is injected into an oil reservoir in order to increase output when extracting oil. Since 1952, Wharton obtained the patent concern CO2 flooding, CO2-EOR （CO2 flooding ...CO2 flooding is a process whereby carbon dioxide is injected into an oil reservoir in order to increase output when extracting oil. Since 1952, Wharton obtained the patent concern CO2 flooding, CO2-EOR （CO2 flooding enhance oil recovery） has been one of research hot-spot around the world. According to the statistical data of 2006, there are total of 94 global CO2-EOR projects, including 65 low permeability oilfield projects （79% of the total）. Daqing Oilfield is the largest one of China, after more than 50 years of continuous development, oilfield comprehensive water cut has reached over 90%, and the difficulty of oilfield development has been gradually increasing. In recent years, low and ultra-low permeability reservoirs development have played a more and more important role accompany with low permeability reserves in proportion of the total reserves have been increasing year by year. But water-flooding recovery of low permeability reservoir is very low under the influence of reservoir poor properties and heterogeneity. As a kind of greenhouse gas, CO2 flooding can obtain good results for the low permeability reservoir in which the water flooding has proven ineffective. CO2 flooding Pilot Test was conducted under such background since Dec. 2002, over 10 years of practice has proved that CO2 flooding is an effective method to improve the development effect of low permeability reservoir, all experience during the mechanism study and field test should present important references for further larger-scale CO2 flooding projects.展开更多
文摘Gas injection is the second largest enhanced oil recovery process, next only to the thermal method used in heavy oil fields. To increase the extent of the reservoir contacted by the injected gas, the gas is generally injected intermittently with water. This mode of injection is called water-alternating-gas (WAG). This study deals with a new immiscible water alternating gas (IWAG) EOR technique, “hot IWAG” which includes combination of thermal, solvent and sweep techniques. In the proposed method CO2 will be superheated above the reservoir temperature and instead of normal temperature water, hot water will be used. Hot CO2 and hot water will be alternatively injected into the sand packs. A laboratory test was conducted on the fractured and conventional sand packs. Slugs of water and CO2 with a low and constant rate were injected into the sand packs alternatively; slug size was 0.05 PV. Recovery from each sand pack was monitored and after that hot water and hot CO2 were injected alternatively under the same conditions and increased oil recovery from each sand pack and breakthrough were measured. Experimental results showed that the injection of hot WAG could significantly recover residual oil after WAG injection in conventional and fractured sand packs.
文摘CO2 flooding is a process whereby carbon dioxide is injected into an oil reservoir in order to increase output when extracting oil. Since 1952, Wharton obtained the patent concern CO2 flooding, CO2-EOR （CO2 flooding enhance oil recovery） has been one of research hot-spot around the world. According to the statistical data of 2006, there are total of 94 global CO2-EOR projects, including 65 low permeability oilfield projects （79% of the total）. Daqing Oilfield is the largest one of China, after more than 50 years of continuous development, oilfield comprehensive water cut has reached over 90%, and the difficulty of oilfield development has been gradually increasing. In recent years, low and ultra-low permeability reservoirs development have played a more and more important role accompany with low permeability reserves in proportion of the total reserves have been increasing year by year. But water-flooding recovery of low permeability reservoir is very low under the influence of reservoir poor properties and heterogeneity. As a kind of greenhouse gas, CO2 flooding can obtain good results for the low permeability reservoir in which the water flooding has proven ineffective. CO2 flooding Pilot Test was conducted under such background since Dec. 2002, over 10 years of practice has proved that CO2 flooding is an effective method to improve the development effect of low permeability reservoir, all experience during the mechanism study and field test should present important references for further larger-scale CO2 flooding projects.
