The combined well pattern has been widely used in reservoir development, with a common pattern being a horizontal well in the center for oil production and multiple vertical wells around for water injection. For this ...The combined well pattern has been widely used in reservoir development, with a common pattern being a horizontal well in the center for oil production and multiple vertical wells around for water injection. For this type of well pattern, determining the horizontal well is affected by which injection wells, especially when the injecting water breaks through, accurately determining the direction of water inflow will provide an important basis for targeted water well measures. Based on the production performance data of horizontal wells, the semi logarithmic relationship curves of water-oil ratio, derivative water-oil ratio, and cumulative production were used for the first time to determine the breakthrough problem of water injection in the surrounding water injection wells of horizontal wells based on their response characteristics. The adaptability of this method under different influencing factors was analyzed. Introducing the parameter of cumulative production not only preserves the variation trend of the derivative of water-oil ratio with time, but also facilitates the processing of actual production data.展开更多
In the fractured water drive reservoirs of China, because of the complex geological conditions, almost all the active water invasions appear to be water breakthrough along fractures, especially along macrofraetures. T...In the fractured water drive reservoirs of China, because of the complex geological conditions, almost all the active water invasions appear to be water breakthrough along fractures, especially along macrofraetures. These seal the path of gas flow, thus the remaining gas in the pores mixes into water, and leads to gas-water interactive distribution in the fractured gas reservoir. These complicated fraetured systems usually generate some abnormal flowing phenomena such as the crestal well produces water while the downdip well in the same gas reservoir produces gas, or the same gas well produces water intermittently. It is very difficult to explain these phenomena using existing fracture models because of their simple handling macrofractures without considering nonlinear flowing in the macrofractures and the low permeability matrix. Therefore, a nonlinear combined-flowing multimedia simulation model was successfully developed in this paper by introducing the equations of macrofractures and considering nonlinear flow in the macrofractures and the matrix. This model was then applied to actual fractured bottom water gas fields. Sensitivity studies of gas produetion by water drainage in fractured gas reservoirs were completed and the effect of different water drainage intensity and ways on actual gas production using this model were calculated. This model has been extensively used to predict the production performance in various fractured gas fields and proven to be reliable.展开更多
An understanding of nutrient movement in soil is important for developing management strategies to minimize nutrient leaching and surface movement, thus improving nutrient uptake by plants, maintaining a sustainable s...An understanding of nutrient movement in soil is important for developing management strategies to minimize nutrient leaching and surface movement, thus improving nutrient uptake by plants, maintaining a sustainable soil system, and even protecting groundwater quality. Polyacrylamide (PAM) is known as one of soil conditioner that functions to stabilize soil structure, increase infiltration, and reduce surface runoff. This study assesses the effects of PAM on the vertical movement of soil-water and major/minor nutrients (NO3-N, NH3-N, T-N, PO4-P, T-P, K, Ca, Mg, and Fe) in soils. Saturated hydraulic conductivity (Ksat) increases with increasing PAM concen- trations up to 10 mg·L-1 for sand and 20 mg·L-1 for a mixture of sand and clay. Decreases in the loss of soluble nutrients, particularly NH3-N, PO4-P and T-P, are observed as PAM concentrations increase. In contrast, PAM concentration has no effect on nitrate and minor nutrient levels. These results indicate that the application of PAM may be a viable method for protecting water bodies from excessive nutrients and improving nutrient availability for plants.展开更多
In the oil and gas industry, water is essential element since it exists in most of the stages, starting from drilling operations, then production processes including injecting in the reservoir to maintain the pressure...In the oil and gas industry, water is essential element since it exists in most of the stages, starting from drilling operations, then production processes including injecting in the reservoir to maintain the pressure, and finally disposing the produced water from the reservoir. Therefore, it is very important to understand the water in the petroleum industry with its different types and study its effects on the reservoirs as well as the downhole and surface equipment. Most of the studies and literature reviews focused on the oil and gas properties. In fact, understanding the properties of the water is as important as the oil and gas properties. Water is always present in the oil and gas fields during production, injection or disposal. Therefore, it has a direct impact on the productivity and overall efficiency of the field and the entire development project. This paper is going to illustrate and focus on several objectives. First, it elaborates the importance of the water in the oil and gas fields. Then, it includes a comprehensive overview of different types of water in the petroleum industry including a summary about of their properties. The main two types that the paper focuses on are the produced water and the injected water. It clarifies the effects of both of them on the reservoir, well completions and facilities. After that, the paper touches bases on the common problems and issues caused by water along with a brief summary of steps needed by the operators to follow in order to solve them. In addition to that, the common monitoring procedures and tests that are usually followed to observe the quality of the water are going to be presented. Finally, couples of solutions used by operators are reviewed to solve the problem of excessive water production after the water breakthrough in the field.展开更多
The breakthrough curves of benzene and water on modified activated carbons（ACs） were investigated.Temperature-programmed desorption（TPD） experiments were conducted to measure the TPD curves of benzene and water on...The breakthrough curves of benzene and water on modified activated carbons（ACs） were investigated.Temperature-programmed desorption（TPD） experiments were conducted to measure the TPD curves of benzene and water on modified and unmodified ACs and to estimate the activation energy for the desorption of benzene on the modified ACs.Starting with unmodified ACs,two modified ACs were prepared by using two different types of silane,designated by KH560 and 1706.The results showed that the activation energy for the desorption of benzene on KH560/AC and 1706/AC was higher than that on unmodified AC.In addition,the activation energy for the desorption of water on KH560/AC and 1706/AC was lower than that on unmodified AC.The breakthrough curves of benzene obtained from the experimental observations under different humidity conditions were compared with the results of the TPD experiments.The results show that the modified ACs are less affected by water,whereas the unmodified ACs are more affected by water,indicating that surface modification by organosilane compounds can improve the adsorption of benzene on the activated carbo,which weakens the adsorption of water.展开更多
This use of biomass-based adsorbent has been explored for the column study of the adsorptive dehydration of water in ethanol-water mixtures. The column study was carried out using enzyme modified corn starch and the b...This use of biomass-based adsorbent has been explored for the column study of the adsorptive dehydration of water in ethanol-water mixtures. The column study was carried out using enzyme modified corn starch and the breakthrough curve parameters were used to design the packed bed column. The effect of flow rate on the breakthrough curves revealed that adsorption efficiency decreased with increased inflow rate. The empty bed contact time (τ) of the pilot plant packed column was 35.35 min while the breakthrough time is 40.78 min. 66.7% was the fraction of capacity left unused for the pilot plant from the design.展开更多
文摘The combined well pattern has been widely used in reservoir development, with a common pattern being a horizontal well in the center for oil production and multiple vertical wells around for water injection. For this type of well pattern, determining the horizontal well is affected by which injection wells, especially when the injecting water breaks through, accurately determining the direction of water inflow will provide an important basis for targeted water well measures. Based on the production performance data of horizontal wells, the semi logarithmic relationship curves of water-oil ratio, derivative water-oil ratio, and cumulative production were used for the first time to determine the breakthrough problem of water injection in the surrounding water injection wells of horizontal wells based on their response characteristics. The adaptability of this method under different influencing factors was analyzed. Introducing the parameter of cumulative production not only preserves the variation trend of the derivative of water-oil ratio with time, but also facilitates the processing of actual production data.
基金Project supported by the Teaching and Research Award Programfor Outstanding Young Teachers for Higher Educa-tion Institutions of Ministry of Education of China and the Fund of Ph.D.Student Supervisor of Ministry of Education of China(Grant No :20040615004) .
文摘In the fractured water drive reservoirs of China, because of the complex geological conditions, almost all the active water invasions appear to be water breakthrough along fractures, especially along macrofraetures. These seal the path of gas flow, thus the remaining gas in the pores mixes into water, and leads to gas-water interactive distribution in the fractured gas reservoir. These complicated fraetured systems usually generate some abnormal flowing phenomena such as the crestal well produces water while the downdip well in the same gas reservoir produces gas, or the same gas well produces water intermittently. It is very difficult to explain these phenomena using existing fracture models because of their simple handling macrofractures without considering nonlinear flowing in the macrofractures and the low permeability matrix. Therefore, a nonlinear combined-flowing multimedia simulation model was successfully developed in this paper by introducing the equations of macrofractures and considering nonlinear flow in the macrofractures and the matrix. This model was then applied to actual fractured bottom water gas fields. Sensitivity studies of gas produetion by water drainage in fractured gas reservoirs were completed and the effect of different water drainage intensity and ways on actual gas production using this model were calculated. This model has been extensively used to predict the production performance in various fractured gas fields and proven to be reliable.
文摘An understanding of nutrient movement in soil is important for developing management strategies to minimize nutrient leaching and surface movement, thus improving nutrient uptake by plants, maintaining a sustainable soil system, and even protecting groundwater quality. Polyacrylamide (PAM) is known as one of soil conditioner that functions to stabilize soil structure, increase infiltration, and reduce surface runoff. This study assesses the effects of PAM on the vertical movement of soil-water and major/minor nutrients (NO3-N, NH3-N, T-N, PO4-P, T-P, K, Ca, Mg, and Fe) in soils. Saturated hydraulic conductivity (Ksat) increases with increasing PAM concen- trations up to 10 mg·L-1 for sand and 20 mg·L-1 for a mixture of sand and clay. Decreases in the loss of soluble nutrients, particularly NH3-N, PO4-P and T-P, are observed as PAM concentrations increase. In contrast, PAM concentration has no effect on nitrate and minor nutrient levels. These results indicate that the application of PAM may be a viable method for protecting water bodies from excessive nutrients and improving nutrient availability for plants.
文摘In the oil and gas industry, water is essential element since it exists in most of the stages, starting from drilling operations, then production processes including injecting in the reservoir to maintain the pressure, and finally disposing the produced water from the reservoir. Therefore, it is very important to understand the water in the petroleum industry with its different types and study its effects on the reservoirs as well as the downhole and surface equipment. Most of the studies and literature reviews focused on the oil and gas properties. In fact, understanding the properties of the water is as important as the oil and gas properties. Water is always present in the oil and gas fields during production, injection or disposal. Therefore, it has a direct impact on the productivity and overall efficiency of the field and the entire development project. This paper is going to illustrate and focus on several objectives. First, it elaborates the importance of the water in the oil and gas fields. Then, it includes a comprehensive overview of different types of water in the petroleum industry including a summary about of their properties. The main two types that the paper focuses on are the produced water and the injected water. It clarifies the effects of both of them on the reservoir, well completions and facilities. After that, the paper touches bases on the common problems and issues caused by water along with a brief summary of steps needed by the operators to follow in order to solve them. In addition to that, the common monitoring procedures and tests that are usually followed to observe the quality of the water are going to be presented. Finally, couples of solutions used by operators are reviewed to solve the problem of excessive water production after the water breakthrough in the field.
基金Funded by the National Natural Science Foundation of China (No.20576041)
文摘The breakthrough curves of benzene and water on modified activated carbons（ACs） were investigated.Temperature-programmed desorption（TPD） experiments were conducted to measure the TPD curves of benzene and water on modified and unmodified ACs and to estimate the activation energy for the desorption of benzene on the modified ACs.Starting with unmodified ACs,two modified ACs were prepared by using two different types of silane,designated by KH560 and 1706.The results showed that the activation energy for the desorption of benzene on KH560/AC and 1706/AC was higher than that on unmodified AC.In addition,the activation energy for the desorption of water on KH560/AC and 1706/AC was lower than that on unmodified AC.The breakthrough curves of benzene obtained from the experimental observations under different humidity conditions were compared with the results of the TPD experiments.The results show that the modified ACs are less affected by water,whereas the unmodified ACs are more affected by water,indicating that surface modification by organosilane compounds can improve the adsorption of benzene on the activated carbo,which weakens the adsorption of water.
文摘This use of biomass-based adsorbent has been explored for the column study of the adsorptive dehydration of water in ethanol-water mixtures. The column study was carried out using enzyme modified corn starch and the breakthrough curve parameters were used to design the packed bed column. The effect of flow rate on the breakthrough curves revealed that adsorption efficiency decreased with increased inflow rate. The empty bed contact time (τ) of the pilot plant packed column was 35.35 min while the breakthrough time is 40.78 min. 66.7% was the fraction of capacity left unused for the pilot plant from the design.
