Shale gas transport in nanopores with mobile water films and water bridge

Gas flow properties in nanopores are significantly determined by the flow patterns. Slug flow pattern is a potential water–gas two phase flow pattern, in which gas molecules flow in form of gas slugs and water molecules separate gas slugs. Considering water slippage, a portion of water molecules accumulates at the wall with lower mobility, while the remaining water molecules take the shape of a water bridge. Adopting foam apparent viscosity model to represent slug rheological behavior, how water bridge disturbs on gas flow capacity is estimated. The results are compared with the water–gas two phase flow model that assumes annular flow pattern as well as the single gas flow model without the consideration of water. The comparison illustrates that gas molecular movement is significantly hindered by flow space reduction and loss of gas slippage. The impact from water phase of slug flow pattern is more significant than that of annular flow pattern on gas flow capacity. It is discovered that larger nanopores improve gas flow capacity while maintaining bulk water layer thickness and increasing water bridge thickness tend to reduce gas transport ability. A better understanding of the structure and transport of water and gas molecules is conducive to figure out the specific gas–water flow behavior and predict shale gas production.

Micro–Nano Water Film Enabled High‑Performance Interfacial Solar Evaporation

Interfacial solar evaporation holds great promise to address the freshwater shortage.However,most interfacial solar evaporators are always filled with water throughout the evaporation process,thus bringing unavoidable heat loss.Herein,we propose a novel interfacial evaporation structure based on the micro–nano water film,which demonstrates significantly improved evaporation performance,as experimentally verified by polypyrrole-and polydopamine-coated polydimethylsiloxane sponge.The 2D evaporator based on the as-prepared sponge realizes an enhanced evaporation rate of 2.18 kg m^(−2)h^(−1)under 1 sun by fine-tuning the interfacial micro–nano water film.Then,a homemade device with an enhanced condensation function is engineered for outdoor clean water production.Throughout a continuous test for 40 days,this device demonstrates a high water production rate(WPR)of 15.9–19.4 kg kW^(−1)h^(−1)m^(−2).Based on the outdoor outcomes,we further establish a multi-objective model to assess the global WPR.It is predicted that a 1 m^(2)device can produce at most 7.8 kg of clean water per day,which could meet the daily drinking water needs of 3 people.Finally,this technology could greatly alleviate the current water and energy crisis through further large-scale applications.

Quantitative research of the liquid film characteristics in upward vertical gas, oil and water flows

The study of liquid film characteristics in multiphase flow is a very important research topic, however,the characteristics of the liquid film around Taylor bubble structure in gas, oil and water three-phase flow are not clear. In the present study, a novel liquid film sensor is applied to measure the distributed signals of the liquid film in three-phase flow. Based on the liquid film signals, the liquid film characteristics including the structural characteristics and the nonlinear dynamics characteristics in three-phase flows are investigated for the first time. The structural characteristics including the proportion, the appearance frequency and the thickness of the liquid film are obtained and the influences of the liquid and gas superficial velocities and the oil content on them are investigated. To investigate the nonlinear dynamics characteristics of the liquid film with the changing flow conditions, the entropy analysis is introduced to successfully uncover and quantify the dynamic complexity of the liquid film behavior.

Rice Cultivation under Film Mulching Can Improve Soil Environment and Be Beneficial for Rice Production in China

Rice cultivation under film mulching is an integrated management technology that can conserve water, increase soil temperature, improve yield, and enhance water and nitrogen use efficiencies. Despite these advantages, the system does have its drawbacks, such as soil organic matter reduction and microplastic pollution, which impede the widespread adoption of film mulching cultivation in China. Nonetheless, the advent of degradable film, controlled-release fertilizer, organic fertilizer, and film mulching machinery is promoting the development of rice film mulching cultivation. This review outlines the impact of rice cultivation under film mulching on soil moisture, soil temperature, soil fertility, greenhouse gas emissions, weed control, and disease and pest management. It also elucidates the mechanism of changes in rice growth, yield and quality, water use efficiency, and nitrogen use efficiency. This paper incorporates a review of published research articles and discusses some uncertainties and shortcomings associated with rice cultivation under film mulching. Consequently, prospective research directions for the technology of rice film mulching cultivation are outlined, and recommendations for future research into rice cultivation under film mulching are proposed.

Electrodeposition of Cu_2O/g-C_3N_4 heterojunction film on an FTO substrate for enhancing visible light photoelectrochemical water splitting

An immobilized Cu2O/g-C3N4 heterojunction film was successfully made on an FTO substrate by electrophoretic deposition of g-C3N4 on a Cu2O thin film.The photoelectrochemical（PEC） performance for water splitting by the Cu2O/g-C3N4 film was better than pure g-C3N4 and pure Cu2O film.Under-0.4 V external bias and visible light irradiation,the photocurrent density and PEC hydrogen evolution efficiency of the optimized Cu2O/g-C3N4 film was-1.38 mA/cm^2 and 0.48 mL h^-1 cm^-2,respectively.The enhanced PEC performance of Cu2O/g-C3N4 was attributed to the synergistic effect of light coupling and a matching energy band structure between g-C3N4 and Cu2O as well as the external bias.

Application of ultra-smooth composite diamond film coated WC-Co drawing dies under water-lubricating conditions

A specific revised HFCVD apparatus and a novel process combining HFCVD and polishing technique were presented to deposit the micro-and nano-crystalline multilayered ultra-smooth diamond（USCD） film on the interior-hole surface of WC-Co drawing dies with aperture ranging from d1.0 mm to 60 mm.Characterization results indicate that the surface roughness values（Ra） in the entry zone,drawing zone and bearing zone of as-fabricated USCD coated drawing die were measured as low as 25.7,23.3 and 25.5 nm,respectively.Furthermore,the friction properties of USCD films were examined in both dry sliding and water-lubricating conditions,and the results show that the USCD film presents much superior friction properties.Its friction coefficients against ball-bearing steel,copper and silicon nitride balls（d4 mm）,is always lower than that of microcrystalline diamond（MCD） or WC-Co sample,regardless of the lubricating condition.Meanwhile,it still presents competitive wear resistance with the MCD films.Finally,the working lifetime and performance of as-fabricated USCD coated drawing dies were examined under producing low-carbon steel pipes in dry-sliding and water-lubricating conditions.Under the water-lubricating drawing condition,its production significantly increases by about 20 times compared with the conventional WC-Co drawing dies.

Removal of NO and SO2 in Corona Discharge Plasma Reactor with Water Film

In this paper, a novel type of a corona discharge plasma reactor was designed, which consists of needle-plate-combined electrodes, in which a series of needle electrodes are placed in a glass container filled with flue gas, and a plate electrode is immersed in the water. Based on this model, the removal of NO and SO2 was tested experimentally. In addition, the effect of streamer polarity on the reduction of SO2 and NO was investigated in detail. The experimental results show that the corona wind formed between the high-voltage needle electrode and the water by corona discharge enhances the cleaning efficiency of the flue gas because of the presence of water, and the cleaning efficiency will increase with the increase of applied dc voltage within a definite range. The removal efficiency of SO2 up to 98%, and about 85% of NOx removal under suitable conditions is obtained in our experiments.

Effects of film mulching regime on soil water status and grain yield of rain-fed winter wheat on the Loess Plateau of China

Shortages and fluctuations in precipitation are influential limiting factors for the sustainable cultivation of rain-fed winter wheat on the Loess Plateau of China. Plastic film mulching is one of the most effective water management practices to improve soil moisture, and may be useful in the Loess Plateau for increasing soil water storage. A field experiment was conducted from July 2010 to June 2012 on the Loess Plateau to investigate the effects of mulching time and rates on soil water storage, evapotranspiration （ET）, water use efficiency （WUE）, and grain yield. Six treatments were conducted： （1） early mulching （starting 30 days after harvest） with whole mulching （EW）; （2） early mulching with half mulching （EH）; （3） early mulching with no mulching （EN）; （4） late mulching （starting 60 days after harvest） with whole mulching （LW）; （5） late mulching with half mulching （LH）; and （6） late mulching with no mulching （LN）. EW increased precipitation storage efficiency during the fallow periods of each season by 18.4 and 17.8%, respectively. EW improved soil water storage from 60 days after harvest to the booting stage and also outperformed LN by 13.8 and 20.9% in each growing season. EW also improved spike number per ha by 13.8 and 20.9% and grain yield by 11.7 and 17.4% during both years compared to LN. However, EW decreased WUE compared with LN. The overall results of this study demonstrated that EW could be a productive and efficient practice to improve wheat yield on the Loess Plateau of China.

Electric-Field-Treated Ni/Co_(3)O_(4) Film as High-Performance Bifunctional Electrocatalysts for Efficient Overall Water Splitting

Rational design of bifunctional electrocatalysts for oxygen evolution reaction(OER)and hydrogen evolution reaction(HER)with excellent activity and stability is of great significance,since overall water splitting is a promising technology for sustainable conversion of clean energy.However,most electrocatalysts do not simultaneously possess optimal HER/OER activities and their electrical conductivities are intrinsically low,which limit the development of overall water splitting.In this paper,a strategy of electric field treatment is proposed and applied to Ni/Co_(3)O_(4) film to develop a novel bifunctional electrocatalyst.After treated by electric field,the conductive channels consisting of oxygen vacancies are formed in the Co_(3)O_(4) film,which remarkably reduces the resistance of the system by almost 2×10^(4) times.Meanwhile,the surface Ni metal electrode is partially oxidized to nickel oxide,which enhances the catalytic activity.The electric-field-treated Ni/Co_(3)O_(4) material exhibits super outstanding performance of HER,OER,and overall water splitting,and the catalytic activity is significantly superior to the state-of-the-art noble metal catalysts(Pt/C,RuO_(2),and RuO_(2)‖Pt/C couple).This work provides an effective and feasible method for the development of novel and efficient bifunctional electrocatalyst,which is also promising for wide use in the field of catalysis.

Prediction for asphalt pavement water film thickness based on artificial neural network

In order to study the variation o f the asphalt pavement water film thickness influenced by multi-factors,anew method for predicting water film thickness was developed by the combination o f the artificial neural network(ANN)a d two-dimensional shallow water equations based on hydrodynamic theory.Multi-factors included the rainfall intensity,pavement width,cross slope,longitudinal slope a d pavement roughness coefficient.The two-dimensional hydrodynamic method was validated by a natural rainfall event.Based on the design scheme o f Shen-Sha expressway engineering project,the limited training data obtained by the two-dimensional hydrodynamic simulation model was used to predict water film thickness.Furthermore,the distribution of the water film thickness influenced by multi-factors on the pavement was analyzed.The accuracy o f the ANN model was verified by the18sets o f data with a precision o f0.991.The simulation results indicate that the water film thickness increases from the median strip to the edge o f the pavement.The water film thickness variation is obviously influenced by rainfall intensity.Under the condition that the pavement width is20m and t e rainfall intensity is3m m/h,t e water film thickness is below10mm in the fast lane and20mm in t e lateral lane.Athough there is fluctuation due to the amount oftraining data,compared with the calculation on the basis o f the existing criterion and theory,t e ANN model exhibits a better performance for depicting the macroscopic distribution of the asphalt pavement water film.

Friction Behaviors of the Hot Filament Chemical Vapor Deposition Diamond Film under Ambient Air and Water Lubricating Conditions

The friction behavior of the hot filament chemical vapor deposition（HFCVD） diamond film plays a critical role on its applications in mechanical fields and largely depends on the environment. Studies on the tribological properties of HFCVD diamond films coated on Co-cemented tungsten carbide （WC-Co） substrates are rarely reported in available literatures, especially in the water lubricating conditions. In this paper, conventional microcrystalline diamond（MCD） and fine-grained diamond（FGD） films are deposited on WC-Co substrates and their friction properties are evaluated on a reciprocating ball-on-plate tribometer, where they are brought to slide against ball-bearing steel and copper balls in dry and water lubricating conditions. Scanning electron microscopy（SEM）, atomic force microscopy（AFM）, surface profilometer and Raman spectroscopy are adopted to characterize as-deposited diamond films; SEM and energy dispersive X-ray（EDX） are used to investigate the worn region on the surfaces of both counterface balls and diamond films. The research results show that the friction coefficient of HFCVD diamond films always starts with a high initial value, and then gradually transits to a relative stable state. For a given counterface and a sliding condition, the FGD film presents lower stable friction coefficients by 0.02-0.03 than MCD film. The transferred materials adhered on sliding interface are supposed to have predominate effect on the friction behaviors of HFCVD diamond films. Furthermore, the effect of water lubricating on reducing friction coefficient is significant. For a given counterpart, the stable friction coefficients of MCD or FGD films reduce by about 0.07-0.08 while sliding in the water lubricating condition, relative to in dry sliding condition. This study is beneficial for widespread applications of HFCVD diamond coated mechanical components and adopting water lubricating system, replacing ofoil lubricating, in a variety of mechanical processing fields to implement the green production process.

Cotton's Water Demand and Water-Saving Benefits under Drip Irrigation with Plastic Film Mulch

The primary purpose of this research was to give suitable irrigation program according to the growth period and water requirement.A cotton field experiment with mulched drip irrigation was conducted at the National Field Observation and Research Station for Oasis Farmland Ecosystem in Aksu of Xinjiang in 2008.Water balance method was adopted to study the water requirement and water consumption law of cotton under mulched drip irrigation in Tarim Irrigated Area.Statistical analysis of experimental data of irrigation indicates that the relationship between yield of cotton and irrigation presents a quadratic parabola.We fit the model of cotton water production on the basis of field experimental data of cotton.And the analysis on water saving benefit of cotton under mulched drip irrigation was done.Results indicate that water requirements for the irrigated cotton are 543 mm in Tarim Irrigated Area.The water requirements of seedling stage is 252 mm,budding stage is 186 mm,bolling stage is 316 mm and wadding stage is 139 mm.the irrigation amount determines the spatial distribution of soil moisture and water consumption during cotton life cycle.However,water consumption at different growth stages was inconsistent with irrigation.Quantitatively,the water consumed by cotton decreases upon the increase of irrigation amount.From the perspective of water saving,the maximal water use efficiency can reach 3 091 m3/ha.But the highest cotton yield needs 3464 m3/ha irrigation water.In summary,compared to the conventional drip irrigation,a number of benefits in water saving and yield increase were observed when using plastic mulch.At the same amount of irrigation,the cotton yield with plastic mulch was 30.2% higher than conventional approaches,and the efficiency of water utilization increased by30.2%.While at the same yield level,29.3% water was saved by using plastic mulch,and the efficiency increased by 41.5%.

Bioinspired Adaptive,Elastic,and Conductive Graphene Structured Thin-Films Achieving High-Efficiency Underwater Detection and Vibration Perception

Underwater exploration has been an attractive topic for understanding the very nature of the lakes and even deep oceans.In recent years,extensive efforts have been devoted to developing functional materials and their integrated devices for underwater information capturing.However,there still remains a great challenge for water depth detection and vibration monitoring in a high-efficient,controllable,and scalable way.Inspired by the lateral line of fish that can sensitively sense the water depth and environmental stimuli,an ultrathin,elastic,and adaptive underwater sensor based on Ecoflex matrix with embedded assembled graphene sheets is fabricated.The graphene structured thin film is endowed with favourable adaptive and morphable features,which can conformally adhere to the structural surface and transform to a bulged state driven by water pressure.Owing to the introduction of the graphene-based layer,the integrated sensing system can actively detect the water depth with a wide range of 0.3-1.8 m.Furthermore,similar to the fish,the mechanical stimuli from land(e.g.knocking,stomping)and water(e.g.wind blowing,raining,fishing)can also be sensitively captured in real time.This graphene structured thin-film system is expected to demonstrate significant potentials in underwater monitoring,communication,and risk avoidance.

Initiation and Development of Water Film by Seepage

When water seeps upwards through a saturated soil layer,the soil layer may become instability and water films occur and develop.Water film serves as a natural sliding surface because of its very small friction.Accordingly,debris flow may happen.To investigate this phenomenon,a pseudothree-phase media is presented first.Then discontinuity method is used to analyze the expansion velocity of water film.Finally,perturbation method is used to analyze the case that a water flow is forced to seep upwards through the soil layer while the movement of the skeleton may be neglected relative to that of water.The theoretical evolutions of pore pressure gradient,effective stress,water velocity,the porosity and the eroded fine grains are obtained.It can be seen clearly that with the erosion and redeposited of fine grains,permeability at some positions in the soil layer becomes smaller and smaller and,the pore pressure gradient becomes bigger and bigger,while the effective stress becomes smaller and smaller.When the effective stress equals zero,e.f.liquefaction,the water film occurs.It is shown also that once a water film occurs,it will be expanded in a speed of U(t)(1-ε).

Simulation of Unsteady Water Film Flow on Pelton Bucket

In order to simulate the complicated unsteady flow in Pelton bucket, it is necessary to apply the animated cartoon approach. In this paper, a free jet and the inner surface of a bucket is described by boundary fitted grid (BFG) with non-orthogonal curvilinear coordinates. The water flow is discretized in space and time for CFD (computational fluid dynamics). The moving grids of water film are successfully projected onto the bucket’s inner surface by a projection algorithm. The visualization result of the jet landing on bucket’s surface and the unsteady flow in the rotating buckets in 3D verifies the effectiveness of the proposed method.

Bioinspired Nanostructured Superwetting Thin-Films in a Self-supported form Enabled“Miniature Umbrella”for Weather Monitoring and Water Rescue

Two-dimensional(2D)soft materials,especially in their self-supported forms,demonstrate attractive properties to realize biomimetic morphing and ultrasensitive sensing.Although extensive efforts on design of self-supported functional membranes and integrated systems have been devoted,there still remains an unexplored regime of the combination of mechanical,electrical and surface wetting properties for specific functions.Here,we report a self-supported film featured with elastic,thin,conductive and superhydrophobic characteristics.Through a well-defined surface modification strategy,the surface wettability and mechanical sensing can be effectively balanced.The resulted film can function as a smart umbrella to achieve real-time simulated raining with diverse frequencies and intensity.In addition,the integrated umbrella can even response sensitively to the sunlight and demonstrate a positively correlation of current signals with the intensity of sun illumination.Moreover,the superhydrophobic umbrella can be further employed to realize water rescue,which can take the underwater object onto water surface,load and rapidly transport the considerable weight.More importantly,the whole process of loaded objects and water flow velocity can be precisely detected.The self-supported smart umbrella can effectively monitor the weather and realize a smart water rescue,demonstrating significant potentials in multifunctional sensing and directional actuation in the presence of water.

Study on water treatment effect of dispersion discharge plasma based on flowing water film electrode

To improve the utilization rate of plasma active species,in this study,a closed non-uniform air gap is formed by a flowing water film electrode and a sawtooth insulating dielectric layer to realize the diffuse glow discharge in the atmosphere.Firstly,the electric field distribution characteristics of non-uniform air gap in the sawtooth dielectric layer are studied,and the influence of aspect ratio on the characteristics of diffuse discharge plasma is discussed.Subsequently,the effects of wire mesh,the inclination angle of the dielectric plate,and liquid inlet velocity on the flow characteristics of the water film electrode are analyzed.The results show that the non-uniform electric field distribution formed in the sawtooth groove can effectively inhibit the filamentous discharge,and the 1 mm flowing water film is directly used as the electrode,and high-active plasma is formed directly on the lower surface of the water film.In addition,a plasma flowing water treatment device is built to treat the methyl orange solution and observe its decolorization effect.The experimental results show that after 50 min of treatment,the decolorization rate of the methyl orange solution reaches 96%,which provides a new idea for industrial applications of wastewater treatment.

Optimized water vapor permeability of sodium alginate films using response surface methodology

The water vapor permeability （WVP） of films is important when developing pharmaceutical applications. Films are frequently used as coatings, and as such directly influence the quality of the medicine. The optimization of processing conditions for sodium alginate films was investigated using response surface methodology. Single-factor tests and Box-Behnken experimental design were employed. WVP was selected as the response variable, and the operating parameters for the single-factor tests were sodium alginate concentration, carboxymethyl cellulose （CMC） concentration and CaClz solution immersion time. The coefficient of determination （R2） was 0.97, indicating statistical significance. A minimal WVP of 0.389 8 g-mm/（m^2.h.kPa） was achieved under the optimum conditions. These were found to be a sodium alginate concentration, CMC concentration and CaCl2 solution immersion time at 8.04%, 0.13%, and 12 min, respectively. This provides a reference for potential applications in manufacturing film-coated hard capsule shells.

Permeability evolution and gas flow in wet coal under non-equilibrium state:Considering both water swelling and process-based gas swelling

Accurate knowledge of gas flow within the reservoir and related controlling factors will be important for enhancing the production of coal bed methane.At present,most studies focused on the permeability evolution of dry coal under gas adsorption equilibrium,gas flow and gas diffusion within wet coal under the generally non-equilibrium state are often ignored in the process of gas recovery.In this study,an improved apparent permeability model is proposed which accommodates the water and gas adsorption,stress dependence,water film thickness and gas flow regimes.In the process of modeling,the water adsorption is only affected by water content while the gas adsorption is time and water content dependent;based on poroelastic mechanics,the effective fracture aperture and effective pore radius are derived;and then the variation in water film thickness for different pore types under the effect of water content,stress and adsorption swelling are modeled;the flow regimes are considered based on Beskok’s model.Further,after validation with experimental data,the proposed model was applied to numerical simulations to investigate the evolution of permeability-related factors under the effect of different water contents.The gas flow in wet coal under the non-equilibrium state is explicitly revealed.

Zeolite A enhanced chitosan films with high water absorption ability and antimicrobial activity

Zeolite A/CS xerogel hybrid films were prepared by in-situ crystallization method with uniform structure and good strength.The hybrid films prepared from the precursor films dried at 50℃showed zeolite A was well crystallized.The hybrid films show high water absorption,good elastic strength and Young modulus.The antimicrobial ability of the hybrid films was investigated after Ag^(+)-ion exchanged.The Ag^(+)-exchanged hybrid films with 35%(mass)content of zeolite A showed the highest antimicrobial activity,which could reduce the concentration of the microbial to zero after 7 h.