Ordered mesoporous materials for water pollution treatment:Adsorption and catalysis

To meet the growing emission of water contaminants,the development of new materials that enhance the efficiency of the water treatment system is urgent.Ordered mesoporous materials provide opportunities in environmental processing applications due to their exceptionally high surface areas,large pore sizes,and enough pore volumes.These properties might enhance the performance of materials concerning adsorption/catalysis capability,durability,and stability.In this review,we enumerate the ordered mesoporous materials as adsorbents/catalysts and their modifications in water pollution treatment from the past decade,including heavy metals(Hg^(2+),Pb^(2+),Cd^(2+),Cr^(6+),etc.),toxic anions(nitrate,phosphate,fluoride,etc.),and organic contaminants(organic dyes,antibiotics,etc.).These contributions demonstrate a deep understanding of the synergistic effect between the incorporated framework and homogeneous active centers.Besides,the challenges and perspectives of the future developments of ordered mesoporous materials in wastewater treatment are proposed.This work provides a theoretical basis and complete summary for the application of ordered mesoporous materials in the removal of contaminants from aqueous solutions.

Hybrid constructed wetlands for highly polluted river water treatment and comparison of surface-and subsurface-flow cells

A series of large pilot constructed wetland （CW） systems were constructed near the confluence of an urban stream to a larger fiver in Xi＇an, a northwestern megacity in China, for treating polluted stream water before it entered the receiving water body. Each CW system is a combination of surface- and subsurface-flow cells with local gravel, sand or slag as substrates and Phragmites australis and Typha orientalis as plants. During a one-year operation with an average surface loading of 0.053 m3/（m2.day）, the overall COD, BOD, NH3-N, total nitrogen （TN） and total phosphorus （TP） removals were 72.7% ~ 4.5%, 93.4% ＋ 2.1%, 54.0% ＋ 6.3%, 53.9% ~ 6.0% and 69.4% ：t： 4.6%, respectively, which brought about an effective improvement of the fiver water quality. Surface-flow cells showed better NH3-N removal than their TN removal while subsurface-flow cells showed better TN removal than their NH3-N removal. Using local slag as the substrate, the organic and phosphorus removal could be much improved. Seasonal variation was also found in the removal of all the pollutants and autumn seemed to be the best season for pollutant removal due to the moderate water temperature and well grown plants in the CWs.

Kinetic Adsorption of Cd onto Nanometer Al_2O_3/Carbon Fibre

A new nanometer material, nano-Al2O3 with carbon fibre as the carrier, was employed for the removal of Cd with low concentrations from polluted water. The characterization of the material was carried out by means of SEM and TEM. Batch adsorption and elution experiments were carried out to determine the adsorption properties of Cd on the new adsorbent. The classical Thomas model was applied to estimating the equilibrium coefficients of Cd adsorption and the saturated adsorption ability. The results show that the Thomas model is fit for describing the kinetic adsorption process, and the maximum adsorption capacity of the nanometer Al2O3/carbon is 69.29 mg/g. The resulting information also indicates that the desorption of Cd eluted with de-ionized water at a rate of 9.8 mL/min can be neglected. With the advantage of a high adsorption capacity for removing low concentration Cd, the Al2O3/carbon fibre possesses the potentiality to be an effective adsorbent for the removal of Cd from polluted water.

Charge transfer between biogenic jarosite derived Fe^3＋ and TiO2 enhances visible light photocatalytic activity of TiO2

In this work, we have shown that mining waste derived Fe^3＋can be used to enhance the photocatalytic activity of TiO2. This will allow us to harness a waste product from the mines, and utilize it to enhance TiO2 photocatalytic waste water treatment efficiency. An organic linker mediated route was utilized to create a composite of TiO2 and biogenic jarosite. Evidence of Fe／O／Ti bonding in the TiO2/jarosite composite was apparent from the FTIR, EFTEM, EELS and ELNEFS analysis. The as prepared material showed enhanced photocatalytic activity compared to pristine TiO2, biogenic jarosite and mechanically mixed sample of jarosite and TiO2 under both simulated and natural solar irradiation. The prepared material can reduce the electrical energy consumption by 4 times compared to pristine P25 for degradation of organic pollutant in water. The material also showed good recyclability. Results obtained from sedimentation experiments showed that the larger sized jarosite material provided the surface to TiO2 nanoparticles, which increases the settling rate of the materials. This allowed simple and efficient recovery of the catalyst from the reaction system after completion of photocatalysis. Enhanced photocatalytic activity of the composite material was due to effective charge transfer between TiO2 and jarosite derived Fe^3＋as was shown from the EELS and ELNEFS. Generation of OHU was supported by photoluminesence（PL） experiments.