Seismic performance evaluation of water supply pipes installed in a full-scale RC frame structure based on a shaking table test

As an important part of nonstructural components,the seismic response of indoor water supply pipes deserves much attention.This paper presents shaking table test research on water supply pipes installed in a full-scale reinforced concrete(RC)frame structure.Different material pipes and different methods for penetrating the reinforced concrete floors are combined to evaluate the difference in seismic performance.Floor response spectra and pipe acceleration amplification factors based on test data are discussed and compared with code provisions.A seismic fragility study of displacement demand is conducted based on numerical simulation.The acceleration response and displacement response of different combinations are compared.The results show that the combination of different pipe materials and different passing-through methods can cause obvious differences in the seismic response of indoor riser pipes.

Importance of Proficiency Testing in Water Quality Monitoring

The monitoring data is undoubtedly important to the water quality monitor- ing department. The proficiency testing is an important way to improve the monitor- ing capacity and enhance the quality management of laboratories. It plays an impor- tant role in ensuring the accuracy, integrity and comparability of monitoring data. In this paper, the positive role of proficiency testing in the water quality monitoring was analyzed. In addition, how to improve the water quality monitoring capacity and the quality management level of laboratories through the proficiency testing was also discussed.

Test system of the front-end readout for an application-specific integrated circuit for the water Cherenkov detector array at the large high-altitude air shower observatory

The water Cherenkov detector array(WCDA) is an important part of the large high-altitude air shower observatory(LHAASO),which is in a research and development phase.The central scientific goal of LHAASO is to explore the origin of high-energy cosmic rays of the universe and to push forward the frontier of new physics.To simplify the WCDA's readout electronics,a prototype of a front-end readout for an application-specific integrated circuit(ASIC) is designed based on the timeover-threshold method to achieve charge-to-time conversion.High-precision time measurement and charge measurement are necessary over a full dynamic range[1-4000photoelectrons(P.E.)].To evaluate the performance of this ASIC,a test system is designed that includes the front-end ASIC test module,digitization module,and test software.The first module needs to be customized for different ASIC versions,whereas the digitization module and test software are tested for general-purpose use.In the digitization module,a field programmable gate array-based time-todigital converter is designed with a bin size of 333 ps,which also integrates an inter-integrated circuit to configure the ASIC test module,and a universal serial bus interface is designed to transfer data to the remote computer.Test results indicate that the time resolution is better than 0.5 ns,and the charge resolution is better than 30%root mean square(RMS) at 1 P.E.and 3%RMS at 4000 P.E.,which are beyond the application requirements.

Model test of the influence of cyclic water level fluctuations on a landslide

Many landslides in reservoir areas continuously deform under cyclic water level fluctuations due to reservoir operations. In this paper,a landslide model, developed for a typical colluvial landslide in the Three Gorges Reservoir area, is used to study the effect of cyclic water level fluctuations on the landslide. Five cyclic water level fluctuations were implemented in the test, and the fluctuation rate in the last two fluctuations doubled over the first three fluctuations. The pore water pressure and lateral landslide profiles were obtained during the test. A measurement of the landslide soil loss was proposed to quantitatively evaluate the influence of water level fluctuations. The test results show that the first water level rising is most negative to the landslide among the five cycles. The fourth drawdown with a higher drawdown rate caused further large landslide deformation. An increase of the water level drawdown rate is much more unfavorable to the landslide than an increase of the water level rising rate. In addition, the landslide was found to have an adaptive ability to resist subsequent water level fluctuations after undergoing large deformation during a water level fluctuation. The landslide deformation and observations in the field were found to support the test results well.

Hybrid Model Testing Technique for Deep-Sea Platforms Based on Equivalent Water Depth Truncation

In this paper, an inner turret moored FPSO which works in the water of 320 m depth, is selected to study the socalled ＂passively-truncated ＋ numerical-simulation＂ type of hybrid model testing technique while the tnmcated water depth is 160 m and the model scale ）, = 80. During the investigation, the optimization design of the equivalent-depth truncated system is performed by using the similarity of the static characteristics between the truncated system and the full depth one as the objective function. According to the truncated system, the corresponding physical test model is made. By adopting the coupling time domain simulation method, the tnmcated system model test is numerically reconstructed to carefully verify the computer simulation software and to adjust the corresponding hydrodynamic parameters. Based on the above work, the numerical extrapolation to the full depth system is performed by using the verified computer software and the adjusted hydrodyrmmic parameters. The full depth system model test is then performed in the basin and the results are compared with those from the numerical extrapolation. At last, the implementation procedure and the key technique of the hybrid model testing of the deep-sea platforms are summarized and printed. Through the above investigations, some beneficial conclusions are presented.

Centrifugal model test on a riverine landslide in the Three Gorges Reservoir induced by rainfall and water level fluctuation

Frequent soil landslide events are recorded in the Three Gorges Reservoir area,China,making it necessary to investigate the failure mode of such riverside landslides.Geotechnical centrifugal test is considered to be the most realistic laboratory model,which can reconstruct the required geo-stress.In this study,the Liangshuijing landslide in the Three Gorgers Reservoir area is selected for a scaled centrifugal model experiment,and a water pump system is employed to retain the rainfall condition.Using the techniques of digital photography and pore water pressure transducers,water level fluctuation is controlled,and multi-physical data are thus obtained,including the pore water pressure,earth pressure,surface displacement and deep displacement.The analysis results indicate that:Three stages were set in the test(waterflooding stage,rainfall stage and drainage stage).Seven transverse cracks with wide of 1–5 mm appeared during the model test,of which 3 cracks at the toe landslide were caused by reservoir water fluctuation,and the cracks at the middle and rear part were caused by rainfall.During rainfall process,the maximum displacement of landslide model reaches 3 cm.And the maximum deformation of the model exceeds 12 cm at the drainage stage.The failure process of the slope model can be divided into four stages:microcracks appearance and propagation stage,thrust-type failure stage,retrogressive failure stage,and holistic failure stage.When the thrust-type zone caused by rainfall was connected or even overlapped with the retrogressive failure zone caused by the drainage,the landslide would start,which displayed a typical composite failure pattern.The failure mode and deformation mechanism under the coupling actions of water level fluctuation and rainfall are revealed in the model test,which could appropriately guide for the analysis and evaluation of riverside landslides.

Soil-water characteristics and shear strength in constant water content triaxial tests on Yunnan red clay

The shear strength parameters for geotechnical designs are obtained mainly from consolidated drained （CD） or consolidated undrained （CU） triaxial tests. However, during construction, the excess pore-air pressure generally dissipates instantaneously while the excess pore-water pressure dissipates with time. This condition needs to be simulated in a constant water content （CW） triaxial test. The study on Yunnan red clay is carried out to investigate the soil-water characteristics and the shear strength characteristics under the constant water content condition. Osmotic technique is used to obtain the soil-water characteristic curve. A series of CW triaxial tests are conducted on statically compacted specimens. The experimental results show that the soil-water characteristic curve has a low air entry value of 7 kPa due to large pores in non-uniform pore size distribution, and a high residual value exceeding 10 MPa. In addition, the initial degree of saturation and net confining stress play an important role in affecting the shear characteristics under the constant water content condition. Finally, a new semi-empirical shear strength model in terms of degree of saturation is proposed and then applied to Yuunan red clay. Simulation result shows that the model is capable of capturing some key features of soils. The model can be used in whole engineering practice range, covering both unsaturmed and saturated soils.

Right recumbent position on gastric emptying of water evidenced by ^(13)C breath testing

AIM:To compare the impact of the right recumbent position with the sitting position on gastric emptying of water. METHODS:In eight healthy male volunteers,the 13C acetate breath test was performed twice to assess gastric emptying of 100 mL tap water.Subjects were seated in one test and lying on their right side in the other.In both positions,pulmonary 13CO2 exhalation curves were obtained by plotting breath data against time.Percent gastric retention curves were created by analyzing data using the Wagner-Nelson protocol. RESULTS:No significant posture effect was found in pulmonary 13CO2 output curves(P=0.2150),whereas a significant effect was seen in gastric retention curves (P=0.0315).The percent retention values at 10 min and 15 min were significantly smaller when subjects were in the right recumbent position compared with the seated position(P<0.05).Our results verified the accelerating effect of the right recumbent position on gastric emptying of non-nutritive solutions.Concerning clinical implications,this study suggests that placing patients with acute pain on their right side after oral administration of analgesic drugs in solution is justified as an effective practice for rapid pain relief.For patients with gastrointestinal reflux symptoms,sleeping in the right recumbent position may reduce nocturnal symptoms,as delayed gastric emptying can cause reflux symptoms. CONCLUSION:Gastric emptying of water occurs more quickly when a subject lies on the right side compared with sitting.

Water shutoff model test in water-rich sandy stratum by phosphoric acid-water glass grout

The rheological behavior of phosphoric acid-water glass grout in different mixing ratios was studied. Grout made of water glass with Baume degree of 20° and 13.4% phosphoric acid by 1:1 volume ratio is found to be more effective in stopping water. Laboratory model test of water shutoff by grouting was conducted. Test results show that the diffusion length and water cutoff effect of the grout are significantly improved as the grout head is raised, due to the dilution of underground water, and it takes the grout longer than its gel time to cut off water.

Orthogonal Test About Biogas Upgrading by Pressured Water Scrubbing

Biogas is a kind of regenerable energy which is inexpensive and friendly to the environment, but the potential ofbiogas is difficult to develop fully in China, for most biogas have badly qualities and the utilization of it is monotonous. The suitable operation term about biogas upgrading by pressurized water scrubbing was researched through the orthogonal test in this study. Two sorts of scrubber packing included the random multidimensional hollow sphere packing and the structured screen packing were also used, and the effects of experiment factors included packing, water temperature, gas flow speed, water flow speed and washing pressure were studied. The results showed that better effect was got when the screen structured packing was used; all the five test factors affected the processing significantly in the arrange as before and had better and better significant effects.

Effects of water saturation and loading rate on direct shear tests of andesite

For estimating the long-term stability of underground framework,it is vital to learn the mechanical and rheological characteristics of rock in multiple water saturation conditions.However,the majority of previous studies explored the rheological properties of rock in air-dried and water saturated conditions,as well as the water effects on compressive and tensile strengths.In this study,andesite was subjected to direct shear tests under five water saturation conditions,which were controlled by varying the wetting and drying time.The tests were conducted at alternating displacement rates under three vertical stresses.The results reveal that the shear strength decreases exponentially as water saturation increases,and that the increase in shear strength with a tenfold increase in displacement rate is nearly constant for each of the vertical stresses.Based on the findings of the shear tests in this study and the compression and tension tests in previous studies,the influences of both water saturation and loading rate on the Hoek-Brown failure criterion for the andesite was examined.These results indicate that the brittleness index of the andesite,which is defined as the ratio of uniaxial compressive strength to tensile strength,is independent of both water saturation and loading rate and that the influences of the water saturation dependence and the loading rate dependence of the failure criterion can be converted between each other.

Uncertainty Analysis for Ship-Bank Interaction Tests in A Circulating Water Channel

This paper presents a systematic model test program to assess the uncertainty of the ship-bank interaction forces,using the planar motion mechanism(PMM)system in a circulating water channel(CWC).Therefore,the uncertainties due to ship-bank distance and water depth are considered,and they are calculated via the partial differentials of the regression formulae based on the test data.The general part of the uncertainty analysis(UA)is performed according to the ITTC recommended procedure 7.5-02-06.04,while the uncertainty of speed is identified as the bias limit due to the flow velocity maldistribution in the CWC.In each example test for the UA of ship-bank interaction forces,12 repeated measurements were conducted.Results from the UA show that the contribution of water depth error and flow velocity maldistribution to the total uncertainty is noticeable,and the paper explains how they increase with the change of the test conditions.The present study will be useful in understanding the uncertainty regarding the ship-bank interaction force measurement in a CWC.

Fall cone tests considering water content, cone penetration index, and plasticity angle of fine-grained soils

This paper analyzed the consistency of some parameters of soils in the literature and experimental results from fall cone test and its application to soil plasticity classification.Over 500 data from both literatures and experiments using fall cone and Casagrande methods were compiled to assess the relationships among specified water content,cone penetration index ebT,and plasticity angle eaT of finegrained soils.The results indicate that no unique correlation exists among b,liquid limit of the fall cone test(LLc)and a.The water content at 1 mm cone penetration eC0T correlates well with b,plasticity ratio eRpT(i.e.the ratio of plastic limit to liquid limit),and a.Finally,the potential of using the btan a diagram to classify soil plasticity was also discussed.

Tests to evaluate the ecological impact of treated ballast water on three Chinese marine species

Ballast water has been a topic of concern for some time because of its potential to introduce invasive species to new habitats. To comply with the International Convention for the Control and Management of Ships' Ballast Water and Sediments, members of the International Maritime Organization(IMO) must equip their ships with on-board treatment systems to eliminate organism release with ballast water. There are many challenges associated with the implementation of this IMO guideline, one of which is the selection of species for testing the ecological impacts of the treated ballast water. In the United States, ballast water toxicity test methods have been defined by the United States Environmental Protection Agency. However, the test methods had not been finalized in China until the toxicity test methods for ballast water were established in 2008. The Chinese methods have been based on species from three trophic levels: Skeletonema costatum, Neomysis awatschensis, and Ctenogobius gymnauchen. All three species live in broad estuarine and open sea areas of China; they are sensitive to reference toxicants and acclimatize easily to different conditions. In this paper, the biological characteristics, test processes and statistical analysis methods are presented for the three species. Results indicate that the methods for evaluating these three organisms can be included in the ecological toxicity tests for treated ballast water in China.

Model Tests Research on A Float-Over Barge in Shallow Water Under the Undocking Conditions

In this study,the Jinzhou 9-3 CEPD float-over installation project was investigated.During the undocking condition,the water depth of the motion path of the working barge gradually changed from 10.31 m to 9.41 m.The undocking clearance of the HYSY 228 is smaller than 1 m;therefore,the barge shows highly nonlinear hydrodynamic characteristics,and it is difficult to be accurately simulated by numerical analysis.Thus,it is necessary to obtain the hydrodynamic characteristics and laws of the float-over barge at different water depths by using tank model test,to provide some reference and guidance for float-over operations in shallow water.

Prediction of wax precipitation region in wellbore during deep water oil well testing

During deep water oil well testing, the low temperature environment is easy to cause wax precipitation, which affects the normal operation of the test and increases operating costs and risks. Therefore, a numerical method for predicting the wax precipitation region in oil strings was proposed based on the temperature and pressure fields of deep water test string and the wax precipitation calculation model. And the factors affecting the wax precipitation region were analyzed. The results show that: the wax precipitation region decreases with the increase of production rate, and increases with the decrease of geothermal gradient, increase of water depth and drop of water-cut of produced fluid, and increases slightly with the increase of formation pressure. Due to the effect of temperature and pressure fields, wax precipitation region is large in test strings at the beginning of well production. Wax precipitation region gradually increases with the increase of shut-in time. These conclusions can guide wax prevention during the testing of deep water oil well, to ensure the success of the test.

Effect of antidepressant treatment on water load test and cortisol changes in patients with functional dyspepsia

BACKGROUND： It has been demonstrated that patients with functional dyspepsia have experiences social life stress events, and accompanied by psychological disorders, mainly manifested as depression and anxiety.Mental factors can lead to excessive gastrointestinal consensual reaction, and result in different brain-gut axis disturbance, and then cause the gastrointestinal sensorimotor abnormality and endocrine changes.OBJECTIVE： To observe the effect of antidepressant treatment on the changes of water load and serum cortisol in patients with functional dyspepsia, and analyze the therapeutic mechanism.DESIGN： A comparative observation.SETTING： The First Affiliated Hospital o Zhengzhou University.PARTICIPANTS： Forty-five patients with functional dyspepsia accompanied by depression were selected from the Department of Gastroenterology, the First Affiliated Hospital of Zhengzhou University from July 2004 to July 2006, and they were 25 - 65 years of age, and their disease courses ranged 1 - 10 years. They were all accorded with the diagnostic standards for Rome Ⅱ functional dyspepsia functional dyspepsia. As the patients＇ will, they were divided into treatment group （n =30, 12 males and 18 females） and control group （n =15, 6 males and 9 females）, and there were no significant differences in the data between the two groups （P 〉 0.05）. The programs were discussed and agreed by the committee of medical ethics of the First Affiliated Hospital of Zhengzhou University. Informed contents were obtained from all the patients.METHODS： In the treatment group, the patients were treated with venlafaxine sustained release capsule （75 mg per day）, and those with sleep disorder were added by benzodiazepines （alprazolam）. In the control group, the patients were given routine treatments of antacid, prokinetics, etc. Before and after 8-week treatment, the following examinations were performed： ① The gastrointestinal symptoms were assessed according to the symptoms; ② The severity of depression was evaluated with Hamilton depression scale （HAMD）; ③The relaxation of proximal stomach was observed using water load test; ④ The serum level of cortisol was detected.MAIN OUTCOME MEASURES： ① Symptom score; ② HAMD score; ③ Water load amount; ④Serum level of cortisol.RESULTS： All the 45 patients were involved in the analysis of results. ① Symptom score： The scores of gastrointestinal symptoms were decreased as compared with those before treatment in both the treatment group and control group （P 〈 0.05）. ② HAMD scores： The scores of HAMD were decreased as compared with those before treatment in both the treatment group and control group （P 〈 0.05）. ③ Water load amount：The total effective rate was significantly higher in the treatment group than the control group （P 〈 0.05）. ④The serum levels of cortisol after treatment were significantly lower than those before treatment in the patients with severe gastrointestinal symptoms in the treatment group and control group （P 〈 0.05）.CONCLUSION： Antidepressants can normalize the cortisol level of patients with functional dyspepsia, and then decrease gastric sensitivity and ameliorates the receptive relaxation of proximal stomach, also increase the water load amount correspondingly, and finally control the gastrointestinal symptoms of functional dyspepsia.

A Test Model of Water Pressures within a Fault in Rock Slope

This paper introduces model test results of water pressure in a fault, which is located in a slope and 16 different conditions. The results show that the water pressures in fault can be expressed by a linear function, which is similar to the theoretical model suggested by Hoek. Factors affecting water pressures are water level in tension crack, dip angle of fault, the height of filling materials and thickness of fault zone in sequence.

Compression Design and Test of Water Vapor Receiving Data by Beidou Satellite

Water vapor monitoring system by Beidou satellite is a new detection system in meteorological department, which makes receiving amount of detected data and data storage and transmission pressure increase. Here, we try to use data compression to relieve pressure. Compres- sion software of water vapor monitoring system by Beidou satellite can be designed into three components： real-time compression software, check compression software and manual compression software, which respectively completes the compression tasks under real-time receiving, in-time check and separate compression, thereby forming a perfect compression system. Taking the design of manual compression software as guide,and using c language to develop,compression test of original receiving data is conducted. Test result proves that the system can carry out batch auto- matic compression, and compression rate can reach 30% ,which can reach the target of saving space in a degree.

Maximum tolerated volume in drinking tests with water and a nutritional beverage for the diagnosis of functional dyspepsia

AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD patients and controls in a Mexican population. METHODS: Twenty FD-Rome Ⅱ patients were matched by age and gender with 20 healthy controls. All underwent both drinking tests at a 15 mL/min rate, randomly, 7 d apart. Every 5 min within each test, four symptoms were evaluated (satiety, bloating, nausea and pain) by Likert scales. Maximum tolerated volume (MTV) was defined as the ingested volume when a score of 5 was reached for any symptom or when the test had to be stopped because the patients could not tolerate more volume. Sensitivity and specificity were analyzed. RESULTS: FD patients had higher symptom scores for both tests compared to controls (water: t= 4.1, P= 0.001 ＜0.01; Nutren(R): t= 5.2, P= 0.001＜0.01). The MTV forwater and Nutren(R) were significantly lower in FD (water: 1014±288 vs 1749±275 mL; t = 7.9, P = 0.001＜0.01;Nutren(R): 652±168 vs 1278±286 mL; t= 6.7, P = 0.001＜0.01). With the volume tolerated by the controls, the percentile 10 was determined as the lower limit fortolerance. Sensitivity and specificity were 0.90, 0.95 for water and 0.95, 0.95 for Nutren(R) tests.CONCLUSION: A drinking test with water or a nutritional beverage can discriminate between FD patients and healthy subjects in Mexico, with high sensitivity and specificity. These tests could be used as objective, noninvasive, and safe diagnostic approaches for FD patients.