Development and application of a two-dimensional water quality model for the Daqinghe River Mouth of the Dianchi Lake

Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.

Assessment of Point and Nonpoint Sources Pollution in Songhua River Basin,Northeast China by Using Revised Water Quality Model

Individual participation of pollutants in the pollution load should be estimated even if roughly for the appropriate environmental management of a river basin.It is difficult to identify the sources and to quantify the load, especially in modeling nonpoint source.In this study a revised model was established by integrating point and nonpoint sources into one-dimensional Streeter-Phelps(S-P) model on the basis of real-time hydrologic data and surface water quality monitoring data in the Jilin Reach of the Songhua River Basin.Chemical oxygen demand(COD) and ammonia nitrogen(NH 3-N) loads were estimated.Results showed that COD loads of point source and nonpoint source were 134 958 t/yr and 86 209 t/yr, accounting for 61.02% and 38.98% of total loads, respectively.NH 3-N loads of point source and nonpoint source were 16 739 t/yr and 14 272 t/yr, accounting for 53.98% and 46.02%, respectively.Point source pollution was stronger than nonpoint source pollution in the study area at present.The water quality of upstream was better than that of downstream of the rivers and cities.It is indispensable to treat industrial wastewater and municipal sewage out of point sources, to adopt the best management practices to control diffuse pollutants from agricultural land and urban surface runoff in improving water quality of the Songhua River Basin.The revised S-P model can be successfully used to identify pollution source and quantify point source and nonpoint source loads by calibrating and validating.

Water Quality Model Establishment for Middle and Lower Reaches of Hanshui River,China

With the development of industry and agriculture,nitrogen,phosphorus and other nutrients in the Hanshui River greatly increase and eutrophication has become an important threat to the water quality of the Hanshui River,especially in the middle and lower reaches.The primary objective of this study was to establish the water quality model for the middle and lower reaches of the Hanshui River based on the model of MIKE 11.The main pollutants migration and transformation process could be simulated using the water quality model.The rainfall-runoff model,hy-drodynamic model and water quality model were established using MIKE 11.The pollutants,such as chemical oxygen demand(COD),biochemical oxygen demand(BOD),ammonia nitrogen,nitrate nitrogen,phosphorus,dissolved oxy-gen(DO),were simulated and predicted using the above three models.A set of methods computing non-point source pollution load of the Hanshui River Basin was proposed in this study.The simulated and observed values of COD,BOD5,ammonia,nitrate,DO,and total phosphorus were compared after the parameter calibration of the water quality model.The simulated and observed results match better,thus the model can be used to predict water quality in the fu-ture for the Hanshui River.The pollution trend could be predicted using the water quality model according pollution load generation.It is helpful for government to take effective measures to prevent the water bloom and protect water quality in the river.

Application of a water quality model for determining instream aeration station location and operational rules:A case study

Instream aeration has been used as a supplement to secondary treatment or a substitute for tertiary treatment for meeting dissolved oxygen （DO） standards in rivers. Many studies have used water quality models to determine the number, location, and capacity of instream aeration stations （IASs） needed to meet DO standards in combination with other pollution control measures. DO concentrations have been improved in the North Shore Channel and North Branch Chicago River by the Devon Avenue IAS for more than 35 years. A study was initiated to determine whether it was better to rehabilitate or relocate this station and to determine appropriate operational guidance for the IAS at the selected location. A water quality model capable of simulating DO concentrations during unsteady flow was used to evaluate the proper location for an IAS and operational guidance for this IAS. Three test years, a dry year, a wet year, and an extreme year, were considered in the evaluation. The study found that the Devon Avenue IAS should be rehabilitated as this location performed as well as or better than any of 10 alternative locations. According to the new operational guidance for this IAS, the amount of time with blowers operating could be substantially reduced compared to traditional operations while at the same time the attainment of the DO standards could be increased. This study shows that a carefully designed modeling study is key to effective selection, location, and operation of IASs such that attainment of DO standards can be maximized while operation hours of blowers can be minimized.

A Three-Dimensional Water Quality Model and Its Application to Jiaozhou Bay, China

A three-dimensional coupled physical and water quality model was developed and applied to the Jiaozhou Bay to study water quality involving nutrients, biochemical oxygen demand, dissolved oxygen, and phytoplankton that are closely related to eutrophication process. The physical model is a modified ECOM-si version with inclusion of flooding/draining processes over the intertidal zone. The water quality model is based on WASP5 which quantifies processes governing internal nutrients cycling, dissolved oxygen balance and phytoplankton growth. The model was used to simulate the spatial distribution and the temporal variation of water quality in the Jiaozhou Bay for the period of May 2005 to May 2006. In addition, the effect of reduction of riverine nutrients load was simulated and evaluated. The simulated results show that under the influence of nutrients discharged from river, the concentrations of nutrients and phytoplankton were higher in the northwest and northeast of the bay, and decreased from the inner bay to the outer. Affected by strong tidal mixing, the concentrations of all state variables were vertically homogeneous except in the deeper regions where a small gradient was found. Obvious seasonal variation of phytoplankton biomass was found, which exhibited two peaks in March and July, respectively. The variation of riverine waste loads had remarkable impact on nutrients concentration in coastal areas, but slightly altered the distribution in the center of the bay.

Inversion of dispersion coeffcient in water quality model using optimal perturbation algorithm

As a primary parameter in the water quality model for shallow bays, the dispersion coefficient is traditionally determined with a trial-and-error method, which is time-consuming and requires much experience. In this paper, based on the measured data of chemical oxygen demand （COD）, the dispersion coefficient is calculated using an inversion method. In the process, the regularization method is applied to treat the ill-posedness, and an operator identity perturbation method is used to obtain the solu- tion. Using the model with an inverted dispersion coefficient, the distributions of COD, inorganic nitrogen （IN）, and inorganic phosphorus （IP） in Bohai Bay are predicted and compared with the measured data. The results indicate that the method is feasible and the inverted dispersion coefficient can be used to predict other pollutant distribution. This method may also be further extended to the inversion of other parameters in the water quality model.

Discharge Water Quality Models of Storm Runoff in a Catchment

The relationships between the water qualities of nitrogen and phosphorous contents in the discharge water and the discharge of storm runoff of an experimental catchment including terraced paddy field are analyzed based on experiment results of the catchment. By summarizing the currently related research on water quality models, the water quality models of different components of storm runoff of the catchment are presented and verified with the experiment data of water quality analyses and the corresponding discharge of the storm runoffs during 3 storms. Through estimating the specific discharge of storm runoff, the specific load of different components of nitrogen and phosphorus in the discharge water of the catchment can be forecasted by the models. It is found that the mathematical methods of linear regression are very useful for analysis of the relationship between the concentrations of nitrogen and phosphorus and the water discharge of storm runoff. It is also found that the most content of the nitrogen (75%) in the discharge water is organic, while half of the content (49%) of phosphorus in the discharge water is inorganic.

Three-Dimensional Water Quality Model Based on FVCOM for Total Load Control Management in Guan River Estuary,Northern Jiangsu Province

Guan River Estuary and adjacent coastal area(GREC) suffer from serious pollution and eutrophicational problems over the recent years.Thus,reducing the land-based load through the national pollutant total load control program and developing hydrodynamic and water quality models that can simulate the complex circulation and water quality kinetics within the system,including longitudinal and lateral variations in nutrient and COD concentrations,is a matter of urgency.In this study,a three-dimensional,hydrodynamic,water quality model was developed in GREC,Northern Jiangsu Province.The complex three-dimensional hydrodynamics of GREC were modeled using the unstructured-grid,finite-volume,free-surface,primitive equation coastal ocean circulation model(FVCOM).The water quality model was adapted from the mesocosm nutrients dynamic model in the south Yellow Sea and considers eight compartments:dissolved inorganic nitrogen,soluble reactive phosphorus(SRP),phytoplankton,zooplankton,detritus,dissolved organic nitrogen(DON),dissolved organic phosphorus(DOP),and chemical oxygen demand.The hydrodynamic and water quality models were calibrated and confirmed for 2012 and 2013.A comparison of the model simulations with extensive dataset shows that the models accurately simulate the longitudinal distribution of the hydrodynamics and water quality.The model can be used for total load control management to improve water quality in this area.

Application of QUAL2K for Water Quality Modeling of River Ghataprabha （India）

River Ghataprabha, during its course through Belgaum district in Karnataka state （India）, receives untreated domestic waste from Gokak town and other neighboring villages situated on the bank of the river. The present study involves the application of water quality model QUAL2K to predict the water quality of this polluted segment of the river. The model was calibrated and validated for biochemical oxygen demand （BOD）, dissolved oxygen （DO） and total nitrogen （TN） in pre-monsoon season. Data for calibration and validation were obtained after the field and laboratory measurements. The performance of the model was evaluated using statistics based on standard errors （SE） and mean multiplicative errors （MME）. The model represented the field data quite well with some exceptions. In spite of some differences between the measured and simulated data sets at some points, the calibration and validation results are acceptable especially for the developing countries where the financial resources are often limited for frequent monitoring campaigns and higher accuracy data analysis.

Incorporating sorption/desorption of organic pollutants into river water quality model

Preliminary research was conducted about how to incorporate sorption/desorption of organic pollutants with suspended solids and sediments into single-chemical and one-dimensional water quality model of Jinghang Canal. Sedimentation-resuspension coefficient k 3 was deduced; characteristics of organic pollutants, concentrations and components of suspended solids/sediments and hydrological and hydraulic conditions were integrated into k 3 and further into river water quality model; impact of sorption/desorption of organic pollutants with suspended solids and sediments on prediction function of the model was discussed. Results demonstrated that this impact is pronounced for organic pollutants with relatively large K oc and K ow, especially when they are also conservative and f oc of river suspended solids/sediments is high, and that incorporation of sorption/ desorption of organic pollutants into river water quality model can improve its prediction accuracy.

River Water Quality Model Based on Remote Sensing Information Methods——A Case Study of Lijing River in Guilin City

River water quality models based on remote sensing information models are superior to pure water quality models because they combine the inevitability and risk of geographical phenomena and can take complex geographical characteristics into account. A water quality model for forecasting COD has been established with remote sensing in- formation modeling methods by monitoring and analyzing water quantity and water quality of the Lijing River reach which flows through a complicated Karst mountain area. This model provides a good tool to predict water quality of complex rivers. It is validated by simulating contaminant concentrations of the study area. The results show that remote sensing information models are suitable for complex geography. It is not only a combined model of inevitability and risk of the geographical phenomena, but also a semi-theoretical and semi-empirical formula, providing a good tool to study organic contaminants in complicated rivers. The coefficients and indices obtained have limited value and the model is not suitable for all situations. Some improvements are required.

Sensitivity Analysis of Parameters in Water Quality Models and Water Environment Management

The impacts of changes of various parameters and stochastic factors on water quality models were studied. The impact of deviation of the degradation coefficient on the model results was investigated. The degradation coefficient was decomposed into the exact part and the deviation part, and the relationship between the errors of the water quality model results and the deviation of the degradation coefficient was derived. The impact of changes in the initial concentration on the model results was discussed. A linear relationship between the initial concentration changes and errors in the model results was obtained, and relevant recommendations to the water quality management were made based on the results. The impacts of stochastic factors in the water environment on the water quality model were analyzed. A variety of random factors which may affect the water quality conditions were attributed to one stochastic factor and it was further assumed to be the white noise. The solutions to the water quality model including the stochastic process were obtained by solving the stochastic differential equation. Simulation results showed that the decay trend of the concentration of the solute would not be changed, and that the results would fluctuate around the expectation centered at each corresponding displacement

Application of Water Quality Model QUAL2K to Model the Dispersion of Pollutants in River Ndarugu, Kenya

Ndarugu River, Kenya, during its course through the different agricultural and industrial areas of Gatundu, Gachororo and Juja farms, receives untreated industrial, domestic and agricultural waste of point source discharges from coffee and tea factories. During wet season the water is also polluted by non-point (diffuse) sources created by runoff carrying soil, fertilizer and pesticide residues from the catchment area. This study involved the calibration of water quality model QUAL2K to predict the water quality of this segment of the river. The model was calibrated and validated for flow discharge (Q), temperature (T&deg), flow velocity (V), biochemical oxygen demand (BOD5), dissolved oxygen (DO) and nitrate (NO3-N), using data collected and analyzed during field and laboratory measurements done in July and November-December 2013. The model was then used in simulation and its performance was evaluated using statistical criteria based on correlation coefficient (R2) and standard errors (SE) between the observed and simulated data. The model reflected the field data quite well with minor exceptions. In spite of these minor differences between the measured and simulated data set at some points, the calibration and validation results are acceptable especially for developing countries where the financial resources for frequent monitoring works and higher accuracy data analysis are very limited. The water is being polluted by the human activities in the catchment. There is need for proper control of wastewater by various techniques, and preliminary treatment of waste discharges prior to effluent disposal. Management of the watershed is necessary so as to protect the river from the adverse impacts of agricultural activities and save it from further deterioration.

A GIS Integrated Water Quality Model System Based on SWMM,ECOM,and RCA

Water Quality Model System( WQMS) is an important approach to analyzing aquatic situation and supporting environmental decision. However,the usage and promotion of WQMS is largely limited by amounts of parameters,complex conditions and enormous operations. A GIS integrated system of urban water environment coupled with SWMM( storm runoff model),ECOM( hydrodynamic model) and RCA( water quality model) was constructed in this study,with the production and transformation of contaminants in large scale taken into consideration. This integrated system guaranteed an independent calculation and multi-model coupling calculation,including convenient pre-processing,fast and efficient model running and results visualization in different spatial and temporal scales,in the purpose of simplifying the usage and promotion of complex models and providing necessary understanding required in water resource managing and water pollution controlling,and ultimately improving decision making capability. The functionality of the proposed system was illustrated by a case of Wuhan city.

PARAMETER ESTIMATION OF MULTI-CONSTITUENT WATER QUALITY MODEL FOR THE LIANGXI RIVER BY MARQUARDT METHOD

A multi-constituent water quality model is presented,Which relates carbonaceous biochemical oxygen demand (CBOD),amonia (NH3-N), nitrite(NO2-N), nitrate(NO3-N) and dissolvedoxygen(DO). The parameters are solved by Marquardt Method (i. e.,Dampled Least Square Method) while initial values inoptimization are produced by Monte-Carlo Method. The Potential ofthe method as a parameter estimation aid is demonstrated for theapplication to the Liangyi Rver, JiangSu Province of China and by aspecial comparison with Gauss Method.

Identification of Water Quality Model Parameter Based on Finite Difference and Monte Carlo

Identification results of water quality model parameter directly affect the accuracy of water quality numerical simulation. To overcome the difficulty of parameter identification caused by the measurement’s uncertainty, a new method which is the coupling of Finite Difference Method and Markov Chain Monte Carlo is developed to identify the parameters of water quality model in this paper. Taking a certain long distance open channel as an example, the effects to the results of parameters identification with different noise are discussed under steady and un-steady non-uniform flow scenarios. And also this proposed method is compared with finite difference method and Nelder Mead Simplex. The results show that it can give better results by the new method. It has good noise resistance and provides a new way to identify water quality model parameters.

Linking Numerical Water Quality Models in an Environmental Information System for Integrated Environmental Assessments

Decision makers involved in prevention of water contamination often lack the technical knowledge of water quality evaluation or the comprehension of complex software for environmental information management required to make effective decisions. Providing information about the environment is not an easy task due to its complex structure, relationships, and dynamic processes. Because environmental models play an important role in environmental decision support systems, the integration of models into user-friendly integrated information systems is a key factor in the support of such users. This paper presents an environmental information system which supports water protection of Coatzacoalcos River in Mexico, having as a main building block water quality assessments supported by mathematical modeling through the two-dimensional Saint Venant and Advection-Diffusion-Reaction equations to calculate the river hydrodynamics and the contaminant transport, respectively. The mathematical modeling solution yields appropriate results representing the river contaminant distribution when compared with field measurements. But the direct use of these models by decision makers is difficult at best, meaning they are not likely to be used in making practical decisions. The system described in this paper integrates these models, and several other tools, into a seamless, user-centered application, improving model usability, initial configuration, and results visualization.

Water Quality Model for Streams: A Review

Six main public domain water quality models which are presently available for Rivers and streams are being captured in this article. These main models could produce important results if they are used in the correct manner, because they are different in terms of assumptions, strength and weaknesses, processes they represent, modeling capability and data in-put requirements. The Model review discussed includes, water quality analysis simulation program (WASP7), simulation catchment (SIMCAT), quality simulation along Rivers (QUASAR), and the temporal overall model for catchment (TOMCAT), QUAL2KW, QUAL2EU. The models are described individually according to a consistent set of criteria-conceptualization, model capability, model strengths, limitations, input data and how it utilized. The outcome showed that TOMCAT and SIMCAT are important in ASSESSING effect of point sources in a very simple way. The QUAL2KW, unlike the QUAL2EU where macrophytes play a major interaction, it can convert algal death to carbonaceous Bio-chemical Oxygen Demand (CBOD), thereby making it more suitable. In addition to the extensive requirement of data, it is expensive and time consuming to set up these complex models such as QUASAR and WASP7. Therefore, one model cannot be used for all the required functionalities. Choosing a model would depend on a specific application, financial cost and time availability. This article may be of help in choosing a suitable model for a specific water quality problem.

Early Water Quality Modeling with Minimal Data to Support Management Decisions： A Case Study of Aguamilpa Reservoir

This paper presents a case study that demonstrates how models can be used to support water management decisions before sufficient data to verify the model are available. In developing areas, and for new reservoirs, extensive data for model calibration and validation are often not available. As a case study we developed a CE-QUAL-W2 model of Aguamilpa Reservoir using minimal data and used the model to create a data acquisition plan to support early planning decisions. We based the model on a two-year period and compared the model results to data recently collected with our acquisition plan. We present how we developed and used the model to design the data acquisition plan which identifies and collects data to update and calibrate the model to support future decisions. We show that a minimally calibrated model based on scarce data can support management decisions and be the first step in a spiral engineering approach to system management. Spiral engineering uses models and data to both support early decisions and to iteratively improve this information to support subsequent decisions and models. This case study can be used as a guide for developing water quality models with minimal data and uses the models to support early decision requirements.

Underground water quality model inversion of genetic algorithm

The underground water quality model with non-linear inversion problem is ill-posed, and boils down to solving the minimum of nonlinear function. Genetic algorithms are adopted in a number of individuals of groups by iterative search to find the optimal solution of the problem, the encoding strings as its operational objective, and achieving the iterative calculations by the genetic operators. It is an effective method of inverse problems of groundwater, with incomparable advantages and practical significances.