This paper presents a superhydrophobic melamine(ME)sponge(ME-g-PLMA)prepared via high-energy radiation-induced in situ covalent grafting of long-alkyl-chain dodecyl methacrylate(LMA)onto an ME sponge for efficient oil...This paper presents a superhydrophobic melamine(ME)sponge(ME-g-PLMA)prepared via high-energy radiation-induced in situ covalent grafting of long-alkyl-chain dodecyl methacrylate(LMA)onto an ME sponge for efficient oil–water separation.The obtained ME-g-PLMA sponge had an excellent pore structure with superhydrophobic(water contact angle of 154°)and superoleophilic properties.It can absorb various types of oils up to 66–168 times its mass.The ME-g-PLMA sponge can continuously separate oil slicks in water by connecting a pump or separating oil underwater with a gravity-driven device.In addition,it maintained its highly hydrophobic properties even after long-term immersion in different corrosive solutions and repeated oil adsorption.The modified ME-g-PLMA sponge exhibited excellent separation properties and potential for oil spill cleanup.展开更多
In this paper, the superhydrophobic polyurethane sponge(SS-PU) was facilely fabricated by etching with Jones reagent to bind the nanoparticles of Ni-Co double layered oxides(LDOs) on the surface, and following modific...In this paper, the superhydrophobic polyurethane sponge(SS-PU) was facilely fabricated by etching with Jones reagent to bind the nanoparticles of Ni-Co double layered oxides(LDOs) on the surface, and following modification with n-dodecyl mercaptan(DDT). This method provides a new strategy to fabricate superhydrophobic PU sponge with a water contact angle of 157° for absorbing oil with low cost and in large scale. It exhibits the strong absorption capacity and highly selective characteristic for various kinds of oils which can be recycled by simple squeezing. Besides, the as-prepared sponge can deal with the floating and underwater oils, indicating its application value in handling oil spills and domestic oily wastewater. The good self-cleaning ability shows the potential to clear the pollutants due to the ultralow adhesion to water. Especially, the most important point is that the superhydrophobic sponge can continuously and effectively separate the oil/water mixture against the condition of turbulent disturbance by using our designed device system, which exhibit its good superhydrophobicity, strong stability.Furthermore, the SS-PU still maintained stable absorption performance after 150 cycle tests without losing capacity obviously, showing excellent durability in long-term operation and significant potential as an efficient absorbent in large-scale dispose of oily water.展开更多
The membrane method based on adaptive wettability shows great advantages in oil-water separation.At present,researches focus on the excellent application performance of the membrane material,while the quantitative ana...The membrane method based on adaptive wettability shows great advantages in oil-water separation.At present,researches focus on the excellent application performance of the membrane material,while the quantitative analysis of interactions in oil-water separation is rarely recognized.Herein,we constructed an adaptable wettability membrane with multiple polymer networks by polydopamine(PDA)and mussel-inspired amphiphilic polymer.Based on the Owens three-probe liquid method,the surface energy of the modified membrane was verified to meet the adaptive wettability conditions,with surface energies(γ-8)of 147.6 mJ m^(−2)(superhydrophilic/underwater superoleophobic)and 49.87 mJ m^(−2)(superhydrophobic/superoleophobic),respectively.The adhesion or repulsion of the membrane to the oil phase under different conditions during the separation process was quantified by the chemical probe AFM technique.In addition,the oil-water selective separation mechanism was further analyzed in a simplified membrane microchannel model.The results show that the different wetting produces capillary additional pressure in opposite directions,resulting in different energies to be overcome when the oil or water passes through the microchannels,thus achieving selective separation.展开更多
Industrial production and domestic discharge produce a large amount of oily wastewater, which seriously affects the stability of the ecological environment. Membrane separation technology provides another path to trea...Industrial production and domestic discharge produce a large amount of oily wastewater, which seriously affects the stability of the ecological environment. Membrane separation technology provides another path to treating oily wastewater. And appropriate surface modification of the membrane helps to achieve high efficiency of treating oily wastewater. With green, economy and stability been more concerned.The focal research reports a completely biodegradable all cellulose composite filter paper(ACCFP) composed of Ⅰ-cellulose macrofibers and Ⅱ-cellulose matrix. It is a simple one-step impregnation method to adjust the surface microstructure of the pristine filter paper(PFP), and it does not involve with chemical reaction. The pre-wetted ACCFP consist of Ⅱ-cellulose hydrogel and Ⅰ-cellulose reinforcement in the process of oil-water separation. This layer of hydrogel is the fundamental to underwater superoleophobicity, which determines their eligibility for applications of efficient oil-water mixture or oil-in-water(oil/water) emulsion separation. The separation efficiency of oil-water mixture and oil/water emulsion exceed 95% and 99.9%, respectively. In addition, excellent mechanical properties of ACCFP in dry and wet conditions ensure its stability in service and prolong service life in applications. The focal study provides a new method for high-performance oil-water separation and it is more in line with sustainable chemistry.展开更多
Nowadays, oil spills have led to a serious environmental crisis of the world. To deal with this problem, inspired from super-hydrophobic lotus leaf, this study fabricated super-hydrophobic and super-lipophilic functio...Nowadays, oil spills have led to a serious environmental crisis of the world. To deal with this problem, inspired from super-hydrophobic lotus leaf, this study fabricated super-hydrophobic and super-lipophilic functionalized graphene oxide/polyurethane (FGP) sponge by a simple and inexpensive dip coating method. The resulting FGP sponge was characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy and water contact angle. The results expressed that FGP sponge exhibited a similar surface structure to that of a lotus leaf, and possessed the super-hydrophobic characteristic with the water contact angle (WAC) of 152°± 1 °. The absorption capacity and reusability were also investigated. It can be seen that, the FGP sponge can remove a wide range of oils and organic solvents from water with good absorption capacities (up to 35 times of its own mass). Significantly, after 10 cycles the absorption capacity of the oils and organic solvents was higher than 90°; for the reused FGP sponge, demonstrating the good reusability of the FGP sponge. Therefore, this study probably provided a simole way to remove the pollutions ofoil spills and toxic organism from water.展开更多
It is of great necessity yet still a challenge to develop superwetting functional interfacial materials for simultaneously separating insoluble oil and degrading soluble dye pollutants in practical wastewater.In this ...It is of great necessity yet still a challenge to develop superwetting functional interfacial materials for simultaneously separating insoluble oil and degrading soluble dye pollutants in practical wastewater.In this work,a Ag-CuO heterostructure-decorated mesh was fabricated via facile alkali etchingcalcination and photoreduction approaches.The as-synthesized mesh with superhydrophilicity and underwater superoleophobicity displayed high separation efficiency(>99.998%)for diverse oil/water mixtures.Besides,it demonstrated more superior photocatalytic performance in dye degradation than those of bare CuO nanostructure-coated materials,which is primarily attributed to the intensive visible light harvesting and efficient electron-holes separation occurred on noble metal-semiconductor heterostructures.Furthermore,on account of the tenacity of Cu substrate as well as enhanced structural stability,this binary composite-decorated mesh exhibited highly reliable durability and robustness after 10 cycles of photocatalytic degradation tests,and even being ultrasonic worn for 30 min.More importantly,our developed mesh was capable of in situ catalytic degrading water-soluble organic dyes during oil/water separation under visible light irradiation.Therefore,such a dexterous and feasible strategy may afford a new route to construct bifunctional and predurable materials for actual sewage purification.展开更多
The size of pores or the grille spacing of water–sediment separation structures directly affects their regulation effect on the debris flow performance.A suitable pore size or grille spacing can effectively improve t...The size of pores or the grille spacing of water–sediment separation structures directly affects their regulation effect on the debris flow performance.A suitable pore size or grille spacing can effectively improve the water–sediment separation ability of the structure.The new funnel-type grating water–sediment separation structure(FGWSS)combines vertical and horizontal structures and provides a satisfactory water–sediment separation effect.However,the regulation effect of the grille spacing of the structure on the debris flow performance has not been studied.The regulation effect of the structure grille spacing on the debris flow performance is studied through a flume test,and the optimal structure grille spacing is obtained.An empirical equation of the relationship between the relative grille spacing of the structure and the sediment separation rate is established.Finally,the influence of the water–sediment separation structure on the regulation effect of debris flows is examined from two aspects:external factors(properties of debris flows)and internal factors(structural factors).The experimental results show that the gradation characteristics of solid particles in debris flows constitute a key factor affecting the regulation effect of the structure on the debris flow performance.The optimum grille spacing of the FGWSS matches the particle size corresponding to the material distribution curves d85~d90 of the debris flow.The total separation rate of debris flow particles is related to the grille spacing of the structure and the content of coarse and fine particles in the debris flow.展开更多
In recent years,numerous studies have been reported for oil/water separation,such as superoleophilic materials for oil absorption and underwater superoleophobic membranes for continuous separation.However,for the reco...In recent years,numerous studies have been reported for oil/water separation,such as superoleophilic materials for oil absorption and underwater superoleophobic membranes for continuous separation.However,for the recovery of oil slick pollution on near-shore ocean surface caused by various reasons,large area and fast availability of used materials are needed to be considered.Herein,we report an efficient and environmentally friendly method to fast process nylon mesh by surface diffuse atmospheric plasma(SDAP)for large-area oil/water separation.Nylon mesh is funcionalized by atmospheric plasma to generate micro/nano composite structures on the surface,resulting in superhydrophilicity and underwater superoleophobicity within only seconds.The pre-wetted modified nylon mesh can achieve high efficiency(>99.9%)and circulating water flux(~30,000 L·m^(-2)·h^(-1)),with high intrusion pressure(~3 kPa)and universality in oil/water separation.Regular plasma unconditionally generated in the atmosphere with the merit of efficiently functionalizing surface has the potential of large-area materials treatment.This study might take one step further for large-area industrial oily wastewater recovery and even oil slicks collection in near-shore water bodies.展开更多
Currently,most of the materials for oil-water separation membranes are limited to fluorine-based polymers with low surface energy.However,it is not biodegradable and requires large amounts of organic and toxic solvent...Currently,most of the materials for oil-water separation membranes are limited to fluorine-based polymers with low surface energy.However,it is not biodegradable and requires large amounts of organic and toxic solvents in the membrane manufacturing process.Therefore,interest in the development of a new eco-friendly oil-water separation membrane that does not cause secondary pollution and exhibits selective wettability characteristics in water or oil is increasing.The biopolymeric nanofibrous membranes inspired by fish skin can provide specific underwater oleophobicity,which is effective for excellent oil-water separation efficiency and prevention of secondary contamination.Fish gelatin,which is highly soluble in water and has a low gelation temperature,can be electrospun in an aqueous solution and has the same polar functional groups as the hydrophilic mucilage of fish skin.In addition,the micro/nanostructure of fish skin,which induces superoleophobicity in water,introduces a bead-on-string structure using the Rayleigh instability of electrospinning.The solubility of fish gelatin in water was removed using an eco-friendly crosslinking method using reducing sugars.Fish skin-mimicking materials successfully separated suspended oil and emulsified oil,with a maximum flux of 2086 Lm^(−2) h^(−1) and a separation efficiency of more than 99%.The proposed biopolymeric nanofibrous membranes use fish gelatin,which can be extracted from fish waste and has excellent biodegradability with excellent oil-water separation performance.In addition,polymer material processing,including membrane manufacturing and crosslinking,can be realized through eco-friendly processes.Therefore,fish skin-inspired biopolymeric membrane is expected to be a promising candidate for a sustainable and effective oil-water separation membrane in the future.展开更多
Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of ...Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of gravity.W-MEL membranes were grown on stainless steel (SS) meshes through in-situ hydrothermal growth method facilitated with (3-aminopropyl)triethoxysilane (APTES) modification of stainless steel meshes,which promote the heterogeneous nucleation and crystal growth of W-MEL zeolites onto the mesh surface.W-MEL membranes were grown on different mesh size supports to investigate the effect of mesh size on the separation performance of the membrane.The assynthesized W-MEL membrane supported on 500 mesh (25μm)(W-MEL-500) exhibit the hydrophilic nature with a water contact angle of 11.8°and delivers the best hexane/water mixture separation with a water flux and separation efficiency of 46247 L·m^(-2)·h^(-1)and 99.5%,respectively.The wettability of W-MEL membranes was manipulated from hydrophilic to hydrophobic nature by chemically modifying with the fluorine-free compounds (hexadecyltrimethoxysilane (HDTMS) and dodecyltrimethoxysilane(DDTMS)) to achieve efficient oil-permselective separation of heavy oils from water.Among the hydrophobically modified W-MEL membranes,W-MEL-500-HDTMS having a water contact angle of146.4°delivers the best separation performance for dichloromethane/water mixtures with a constant oil flux and separation efficiency of 61490 L·m^(-2)·h^(-1)and 99.2%,respectively along with the stability tested up to 20 cycles.Both W-MEL-500-HDTMS and W-MEL-500-DDTMS membranes also exhibit similar separation performances for the separation of heavy oil from sea water along with a 20-fold lower corrosion rate in comparison with the bare stainless-steel mesh,indicating their excellent stability in seawater.Compared to the reported zeolite membranes for oil/water separation,the as-synthesized and hydrophobically modified W-MEL membranes shows competitive separation performances in terms of flux and separation efficiency,demonstrating the good potentiality for oil/water separation.展开更多
Because of the increasing amount of oily wastewater produced each day,it is important to develop superhydrophilic/underwater superoleophobic oil/water separation membranes with ultrahigh flux and high separation effic...Because of the increasing amount of oily wastewater produced each day,it is important to develop superhydrophilic/underwater superoleophobic oil/water separation membranes with ultrahigh flux and high separation efficiency.In this paper,a superhydrophilic/underwater superoleophobic N-isopropylacrylamide-coated stainless steel mesh was prepared through a simple and convenient graft polymerization approach.The obtained mesh was able to separate oil/water mixtures only by gravity.In addition,the mesh showed high-efficiency separation ability(99.2%)and ultrahigh flux(235239 L·m^(−2)·h^(−1)).Importantly,due to the complex cross-linked bilayer structure,the prepared mesh exhibited good recycling performance and chemical stability in highly saline,alkaline and acidic environments.展开更多
The oil/water separation in a liquid-liquid cylindrical cyclone is experimentally studied in this article.The effects of the flow split-ratio and the flow rate on the oil/water separation performance are determined.Fr...The oil/water separation in a liquid-liquid cylindrical cyclone is experimentally studied in this article.The effects of the flow split-ratio and the flow rate on the oil/water separation performance are determined.From the experimental results,it is shown that with the increase of the flow split-ratio,the oil/water separation efficiency is enhanced at first,and an optimal flow split-ratio exists,beyond that optimal split-ratio,the watercut in the underflow keeps constant,while the oil content in the overflow begins to decrease.The process of the oil core structure formation and the phase distribution in the cyclone are determined by numerical simulations.Furthermore,the dependence of the separation efficiency on the Reynolds number and the flow split-ratio is investigated based on a dimensional analysis.A comparison between the predicted values and the experimental data shows a good agreement.展开更多
Fouling-resistant ceramic-supported polymer composite membranes were developed for removal of oil-in-water (O/W) mieroemulsions. The composite membranes were featured with an asymmetric three-layer structure, i.e., ...Fouling-resistant ceramic-supported polymer composite membranes were developed for removal of oil-in-water (O/W) mieroemulsions. The composite membranes were featured with an asymmetric three-layer structure, i.e., a porous ceramic membrane substrate, a polyvinylidene fluoride (PVDF) ultrafiltration sub-layer, and a polyamide/polyvinyl alcohol (PVA) composite thin top-layer. The PVDF polymer was east onto the tubular porous ceramic membranes with an immersion precipitation method, and the polyamide/PVA composite thin top-layer was fabricated with an inteffaeial polymerization method. The effects of the sub-layer composition and the recipe in the inteffaeial polymerization for fabricating the top-layer on the structure and performance of composite membranes were systematically investigated. The prepared composite membranes showed a good performance for treating the O/W microemulsions with a mean diameter of about 2.41μm. At the operating pressure of 0.4MPa, the hydraulic permeability remained steadily about 190L·m^-2·h^-1, the oil concentration in the permeate was less than 1.6mg·L^-1, and the oil rejection coefficient was always higher than 98.5% throughout the operation from the beginning.展开更多
The frequent occurrence of crude oil leakage accidents and the massive discharge of industrial oily wastewater not only caused huge damage and pollution to the ecosystem but also wasted a lot of precious resources.The...The frequent occurrence of crude oil leakage accidents and the massive discharge of industrial oily wastewater not only caused huge damage and pollution to the ecosystem but also wasted a lot of precious resources.Therefore,it is urgent to solve the worldwide problem of oil/water separation.As a leader in advanced fiber materials,nanofibrous materials prepared by electrospinning have the advantages of high permeability,high separation efficiency,large specific surface area,adjustable wettability,simple preparation process,and low cost,making it attracted more attention of researchers in oil/water separation.This article mainly reviews the recent progress of various electrospun nanofibrous materials for oil/water separation field.The preparation and synthesis of nanofibrous adsorbents,nanofibrous membranes,and nanofibrous aerogels in recent years based on different applications,design principles,and separation approaches are systematically summarized.Finally,this review discusses the challenges and future development directions in oil/water separation.展开更多
Discharging untreated oily wastewater into the environment disrupts the ecological balance,which is a global problem that requires urgent solutions.Superhydrophilic and superoleophilic fibrous medium(FM)effectively se...Discharging untreated oily wastewater into the environment disrupts the ecological balance,which is a global problem that requires urgent solutions.Superhydrophilic and superoleophilic fibrous medium(FM)effectively separated oil–water emulsion as it was hydrophobic underwater.But its separation efficiencies(SEs)first increased to 98.9%,then dropped to 97.6%in 10 min because of oil-fouling.To tackle this problem,FM deposited with 0%–10%silica nanoparticle(NPsFMs),then coated by fluorocarbon polymer(X-[CH_(2)CH_(2)O]nCH_(2)CH_(2)O-Y-NH-COOCH_(2)C4F9)(FCNPs FMs),was used to enhance its roughness and regulate its initial wettability to improve the anti-fouling property.FCFM and FCNPs FMs were hydrophobic and oleophobic in air and oleophobic underwater.Their water contact angles,oil contact angles and oil contact angles were 115.3°–121.1°,128.8°–136.5°,and 131.6°–136.7°,respectively,meeting the requirement of 90°–140°for coalescence separation.FCNPs FM-5 had the best separation performance with a constant value of 99.8%in 10 min,while that of FCNPs FM-10 slightly decreased to 99.5%.Theoretical released droplet(TRD)diameter,calculated by the square root of the product of pore radius and fiber diameter,was used for the evaluation of coalescence performance.Analyzed by two ideal models,TRD diameter and fiber diameter showed a parabola type relationship,proving that the separation efficiency was a collaborative work of wettability,pore size and fiber diameter.Also,it explained the SEs reduction from FCNPs FM-5 to FCNPs FM-10 was revelent to the three parameters.Moreover,FCNPsFMs effectively separated emulsions stabilized by cationic surfactant CTAB(SEs:97.3%–98.4%)and anionic surfactant SDBS(SEs:91.3%–93.4%).But they had an adverse effect on nonionic surfactant Tween-80 emulsion separation(SEs:94.0%–71.76%).Emulsions made by diverse oils can be effectively separated:octane(SEs:99.4%–100%),rapeseed oil(SEs:97.3%–98.8%),and diesel(SEs:95.2%–97.0%).These findings provide new insights for designing novel materials for oil–water separation by coalescence mechanism.展开更多
Superwetting surfaces have the potential to address oil pollution in water,through their ability to separate the two.However,it remains a great challenge to fabricate stable and efficient separation structures using c...Superwetting surfaces have the potential to address oil pollution in water,through their ability to separate the two.However,it remains a great challenge to fabricate stable and efficient separation structures using conventional manufacturing techniques.Furthermore,the materials traditionally used for oil-water separation are not stable at high temperature.Therefore,there is a need to develop stable,customizable structures to improve the performance of oil-water separation devices.In recent years,3D printing technology has developed rapidly,and breakthroughs have been made in the fabrication of complicated ceramic structures using this technology.Here,a ceramic material with a gradient pore structure and superhydrophobic/superoleophilic properties was prepared using 3D printing for high-efficiency oil-water separation.The gradient pore structure developed here can support a flux of up to 25434 L/m^(2)h,which is nearly 40%higher than that an analogous structure with straight pores.At 200℃,the oil-water separation performance was maintained at 97.4%.Furthermore,samples of the material exhibited outstanding mechanical properties,and chemical stability in a variety of harsh environments.This study provides an efficient,simple,and reliable method for manufacturing oil-water separation materials using 3D printing,and may have broader implications for both fundamental research and industrial applications.展开更多
Stimuli-responsive materials with switchable wettability have promising practical applications in oil/water separation.A novel CO_(2)-responsive cotton fabric for controlled oil/water separation was fabricated based o...Stimuli-responsive materials with switchable wettability have promising practical applications in oil/water separation.A novel CO_(2)-responsive cotton fabric for controlled oil/water separation was fabricated based on mussel-inspired reaction and polymerized with 2-(dimethylamino)ethyl methacrylate(DMAEMA).As expected,the modified fabric exhibited switchable hydrophilicity and hydrophobicity after CO_(2)/N_(2) alternation,and it could be used for gravity-driven CO_(2)-controlled oil/water separation.Water was selectively penetrated through the fabric and separated from oil after treating by CO_(2).A reversed wettability could be generated through simply treated with N2.It is expected that the as-prepared fabrics could be applied in smart oil/water separation due to the attractive properties of CO_(2)-switchable system.展开更多
The design and development of new advanced superwetting porous membranes with antioil-fouling performance are still rare and highly desirable because of their potential widespread applications.A metallic phosphate nan...The design and development of new advanced superwetting porous membranes with antioil-fouling performance are still rare and highly desirable because of their potential widespread applications.A metallic phosphate nanoflower-covered mesh membrane with superhydrophilic and unprecedented antioil-fouling properties is prepared by an exceptionally simple and effective in-situ solution corrosion method.As demonstrated,the outstanding antioil-fouling property of the resulting mesh membrane is connected with the special phosphate group and the three-dimensional(3 D) nanoflower structure.Owing to the antioil-fouling property,upon to water,the oil-fouled mesh membrane can keep the surface free of various kinds of oils,including viscous crude oil to light n-hexane.Thanks to its unprecedented self-cleaning property,the superhydrophilic mesh membrane can effectively separate different oil/water mixtures without prior wetted by water,exhibiting great potential for practical spilled oil remediation.展开更多
Surface deposition based on metal-phenolic networks(MPNs) has received increasing interest in recent years. The catechol structure is generally considered to be essential to the formation of MPNs. Our most recent resu...Surface deposition based on metal-phenolic networks(MPNs) has received increasing interest in recent years. The catechol structure is generally considered to be essential to the formation of MPNs. Our most recent results have demonstrated that some kinds of monophenols can form MPNs on substrate surfaces.Herein, we report a fast and effective surface-coating system based on the coordination of 3-(4-hydroxy-3-methoxyphenyl)-2-propenoic acid, a kind of monophenol, with Fe^(3+). Compared with other metal ions such as Cu^(2+)and Ni^(2+), Fe^(3+)with stronger electron acceptability can coordinate with the monophenol more strongly to form MPNs, and moreover, the deposition time significantly decreases to 40 min from generally 24 h. It is demonstrated that the deposition process is controlled by the coordination, Fe^(3+)hydrolysis, and deprotonation of the monophenol. The coatings endow substrates such as polypropylene microfiltration membrane with underwater superoleophobicity, which can be applied in oil/water separation with high separation efficiency and great long-term stability. In addition, the coated membranes are positively charged and thus are useful in selective adsorption of dyes. The present work not only provides a novel, fast, and one-step deposition method to fabricate MPNs, but also demonstrates that the fabrication efficiency of monophenol-based MPNs is comparable with that of polyphenol-based MPNs.展开更多
The increasing applications of seawater desalination technology have led to the wide usage of polyamide reverse osmosis membranes,resulting in a large number of wasted reverse osmosis membranes.In this work,the base n...The increasing applications of seawater desalination technology have led to the wide usage of polyamide reverse osmosis membranes,resulting in a large number of wasted reverse osmosis membranes.In this work,the base nonwoven layer of the wasted reverse osmosis membrane was successfully modified into the hydrophobic membrane via surface deposition strategy including TiO_(2) and 1H,1H,2H,2H-perfluorooctyltrichlorosilane(PFOTS),respectively.Various techniques were applied to characterize the obtained membranes,which were then used to separate the oil–water system.The optimally modified membrane displayed good hydrophobicity with a contact angle of 135.2°±0.3°,and its oil–water separation performance was as high as 97.8%.After 20 recycle tests,the oil–water separation performance remained more than 96%,which was attributed to the film adhesion of the anchored TiO_(2) and PFOTS layer on the surface.This work might provide a new avenue for recycling the wasted reverse osmosis membrane used in oily wastewater purification.展开更多
文摘This paper presents a superhydrophobic melamine(ME)sponge(ME-g-PLMA)prepared via high-energy radiation-induced in situ covalent grafting of long-alkyl-chain dodecyl methacrylate(LMA)onto an ME sponge for efficient oil–water separation.The obtained ME-g-PLMA sponge had an excellent pore structure with superhydrophobic(water contact angle of 154°)and superoleophilic properties.It can absorb various types of oils up to 66–168 times its mass.The ME-g-PLMA sponge can continuously separate oil slicks in water by connecting a pump or separating oil underwater with a gravity-driven device.In addition,it maintained its highly hydrophobic properties even after long-term immersion in different corrosive solutions and repeated oil adsorption.The modified ME-g-PLMA sponge exhibited excellent separation properties and potential for oil spill cleanup.
基金the financial support from National Key Research & Development Program of China (2017B0602702)。
文摘In this paper, the superhydrophobic polyurethane sponge(SS-PU) was facilely fabricated by etching with Jones reagent to bind the nanoparticles of Ni-Co double layered oxides(LDOs) on the surface, and following modification with n-dodecyl mercaptan(DDT). This method provides a new strategy to fabricate superhydrophobic PU sponge with a water contact angle of 157° for absorbing oil with low cost and in large scale. It exhibits the strong absorption capacity and highly selective characteristic for various kinds of oils which can be recycled by simple squeezing. Besides, the as-prepared sponge can deal with the floating and underwater oils, indicating its application value in handling oil spills and domestic oily wastewater. The good self-cleaning ability shows the potential to clear the pollutants due to the ultralow adhesion to water. Especially, the most important point is that the superhydrophobic sponge can continuously and effectively separate the oil/water mixture against the condition of turbulent disturbance by using our designed device system, which exhibit its good superhydrophobicity, strong stability.Furthermore, the SS-PU still maintained stable absorption performance after 150 cycle tests without losing capacity obviously, showing excellent durability in long-term operation and significant potential as an efficient absorbent in large-scale dispose of oily water.
基金We gratefully acknowledge the financial support from National Key Research and Development Project,China(2019YFA0708700)the National Natural Science Foundation of China(52222403,52074333)the Innovation Fund Project for graduate students of China University of Petroleum(East China)(22CX04049A).
文摘The membrane method based on adaptive wettability shows great advantages in oil-water separation.At present,researches focus on the excellent application performance of the membrane material,while the quantitative analysis of interactions in oil-water separation is rarely recognized.Herein,we constructed an adaptable wettability membrane with multiple polymer networks by polydopamine(PDA)and mussel-inspired amphiphilic polymer.Based on the Owens three-probe liquid method,the surface energy of the modified membrane was verified to meet the adaptive wettability conditions,with surface energies(γ-8)of 147.6 mJ m^(−2)(superhydrophilic/underwater superoleophobic)and 49.87 mJ m^(−2)(superhydrophobic/superoleophobic),respectively.The adhesion or repulsion of the membrane to the oil phase under different conditions during the separation process was quantified by the chemical probe AFM technique.In addition,the oil-water selective separation mechanism was further analyzed in a simplified membrane microchannel model.The results show that the different wetting produces capillary additional pressure in opposite directions,resulting in different energies to be overcome when the oil or water passes through the microchannels,thus achieving selective separation.
基金the financial support from the National Key R&D Program of China (no. 2018YFB1501602)Science Foundation of Shanxi Province, China (Grant no. 201901D111006ZD)+1 种基金Fund for Shanxi “1331 project”Shanxi Province Platform Base and Talent Special Fund (no. 201705D211023)。
文摘Industrial production and domestic discharge produce a large amount of oily wastewater, which seriously affects the stability of the ecological environment. Membrane separation technology provides another path to treating oily wastewater. And appropriate surface modification of the membrane helps to achieve high efficiency of treating oily wastewater. With green, economy and stability been more concerned.The focal research reports a completely biodegradable all cellulose composite filter paper(ACCFP) composed of Ⅰ-cellulose macrofibers and Ⅱ-cellulose matrix. It is a simple one-step impregnation method to adjust the surface microstructure of the pristine filter paper(PFP), and it does not involve with chemical reaction. The pre-wetted ACCFP consist of Ⅱ-cellulose hydrogel and Ⅰ-cellulose reinforcement in the process of oil-water separation. This layer of hydrogel is the fundamental to underwater superoleophobicity, which determines their eligibility for applications of efficient oil-water mixture or oil-in-water(oil/water) emulsion separation. The separation efficiency of oil-water mixture and oil/water emulsion exceed 95% and 99.9%, respectively. In addition, excellent mechanical properties of ACCFP in dry and wet conditions ensure its stability in service and prolong service life in applications. The focal study provides a new method for high-performance oil-water separation and it is more in line with sustainable chemistry.
基金Supported by the National Natural Science Foundation of China(21776319)
文摘Nowadays, oil spills have led to a serious environmental crisis of the world. To deal with this problem, inspired from super-hydrophobic lotus leaf, this study fabricated super-hydrophobic and super-lipophilic functionalized graphene oxide/polyurethane (FGP) sponge by a simple and inexpensive dip coating method. The resulting FGP sponge was characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy and water contact angle. The results expressed that FGP sponge exhibited a similar surface structure to that of a lotus leaf, and possessed the super-hydrophobic characteristic with the water contact angle (WAC) of 152°± 1 °. The absorption capacity and reusability were also investigated. It can be seen that, the FGP sponge can remove a wide range of oils and organic solvents from water with good absorption capacities (up to 35 times of its own mass). Significantly, after 10 cycles the absorption capacity of the oils and organic solvents was higher than 90°; for the reused FGP sponge, demonstrating the good reusability of the FGP sponge. Therefore, this study probably provided a simole way to remove the pollutions ofoil spills and toxic organism from water.
基金supported by the National Natural Science Foundation of China(21303232)the China Postdoctoral Science Foundation(2018M632610)
文摘It is of great necessity yet still a challenge to develop superwetting functional interfacial materials for simultaneously separating insoluble oil and degrading soluble dye pollutants in practical wastewater.In this work,a Ag-CuO heterostructure-decorated mesh was fabricated via facile alkali etchingcalcination and photoreduction approaches.The as-synthesized mesh with superhydrophilicity and underwater superoleophobicity displayed high separation efficiency(>99.998%)for diverse oil/water mixtures.Besides,it demonstrated more superior photocatalytic performance in dye degradation than those of bare CuO nanostructure-coated materials,which is primarily attributed to the intensive visible light harvesting and efficient electron-holes separation occurred on noble metal-semiconductor heterostructures.Furthermore,on account of the tenacity of Cu substrate as well as enhanced structural stability,this binary composite-decorated mesh exhibited highly reliable durability and robustness after 10 cycles of photocatalytic degradation tests,and even being ultrasonic worn for 30 min.More importantly,our developed mesh was capable of in situ catalytic degrading water-soluble organic dyes during oil/water separation under visible light irradiation.Therefore,such a dexterous and feasible strategy may afford a new route to construct bifunctional and predurable materials for actual sewage purification.
基金supported by the National Natural Science Foundation of China(Grant Nos.42027806 and 42041006)。
文摘The size of pores or the grille spacing of water–sediment separation structures directly affects their regulation effect on the debris flow performance.A suitable pore size or grille spacing can effectively improve the water–sediment separation ability of the structure.The new funnel-type grating water–sediment separation structure(FGWSS)combines vertical and horizontal structures and provides a satisfactory water–sediment separation effect.However,the regulation effect of the grille spacing of the structure on the debris flow performance has not been studied.The regulation effect of the structure grille spacing on the debris flow performance is studied through a flume test,and the optimal structure grille spacing is obtained.An empirical equation of the relationship between the relative grille spacing of the structure and the sediment separation rate is established.Finally,the influence of the water–sediment separation structure on the regulation effect of debris flows is examined from two aspects:external factors(properties of debris flows)and internal factors(structural factors).The experimental results show that the gradation characteristics of solid particles in debris flows constitute a key factor affecting the regulation effect of the structure on the debris flow performance.The optimum grille spacing of the FGWSS matches the particle size corresponding to the material distribution curves d85~d90 of the debris flow.The total separation rate of debris flow particles is related to the grille spacing of the structure and the content of coarse and fine particles in the debris flow.
基金This work was financially funded by the National Natural Science Foundation of China(Nos.22205247 and 21988102).
文摘In recent years,numerous studies have been reported for oil/water separation,such as superoleophilic materials for oil absorption and underwater superoleophobic membranes for continuous separation.However,for the recovery of oil slick pollution on near-shore ocean surface caused by various reasons,large area and fast availability of used materials are needed to be considered.Herein,we report an efficient and environmentally friendly method to fast process nylon mesh by surface diffuse atmospheric plasma(SDAP)for large-area oil/water separation.Nylon mesh is funcionalized by atmospheric plasma to generate micro/nano composite structures on the surface,resulting in superhydrophilicity and underwater superoleophobicity within only seconds.The pre-wetted modified nylon mesh can achieve high efficiency(>99.9%)and circulating water flux(~30,000 L·m^(-2)·h^(-1)),with high intrusion pressure(~3 kPa)and universality in oil/water separation.Regular plasma unconditionally generated in the atmosphere with the merit of efficiently functionalizing surface has the potential of large-area materials treatment.This study might take one step further for large-area industrial oily wastewater recovery and even oil slicks collection in near-shore water bodies.
基金supported by the Technology Innovation Program(20018540)funded by the Ministry of Trade,Industry and Energy(MOTIE,Korea)+1 种基金supported by the Basic Science Research Program of the National Research Foundation of Korea(NRF)funded by the Ministry of Education(NRF-2021R1A4A2001403).
文摘Currently,most of the materials for oil-water separation membranes are limited to fluorine-based polymers with low surface energy.However,it is not biodegradable and requires large amounts of organic and toxic solvents in the membrane manufacturing process.Therefore,interest in the development of a new eco-friendly oil-water separation membrane that does not cause secondary pollution and exhibits selective wettability characteristics in water or oil is increasing.The biopolymeric nanofibrous membranes inspired by fish skin can provide specific underwater oleophobicity,which is effective for excellent oil-water separation efficiency and prevention of secondary contamination.Fish gelatin,which is highly soluble in water and has a low gelation temperature,can be electrospun in an aqueous solution and has the same polar functional groups as the hydrophilic mucilage of fish skin.In addition,the micro/nanostructure of fish skin,which induces superoleophobicity in water,introduces a bead-on-string structure using the Rayleigh instability of electrospinning.The solubility of fish gelatin in water was removed using an eco-friendly crosslinking method using reducing sugars.Fish skin-mimicking materials successfully separated suspended oil and emulsified oil,with a maximum flux of 2086 Lm^(−2) h^(−1) and a separation efficiency of more than 99%.The proposed biopolymeric nanofibrous membranes use fish gelatin,which can be extracted from fish waste and has excellent biodegradability with excellent oil-water separation performance.In addition,polymer material processing,including membrane manufacturing and crosslinking,can be realized through eco-friendly processes.Therefore,fish skin-inspired biopolymeric membrane is expected to be a promising candidate for a sustainable and effective oil-water separation membrane in the future.
基金Financial support from the Science Fund for Creative Research Groups of the National Science Foundation of China (22021005)the National Natural Science Foundation of China (21776032)the Innovation Team of Dalian University of Technology (DUT2017TB01)。
文摘Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of gravity.W-MEL membranes were grown on stainless steel (SS) meshes through in-situ hydrothermal growth method facilitated with (3-aminopropyl)triethoxysilane (APTES) modification of stainless steel meshes,which promote the heterogeneous nucleation and crystal growth of W-MEL zeolites onto the mesh surface.W-MEL membranes were grown on different mesh size supports to investigate the effect of mesh size on the separation performance of the membrane.The assynthesized W-MEL membrane supported on 500 mesh (25μm)(W-MEL-500) exhibit the hydrophilic nature with a water contact angle of 11.8°and delivers the best hexane/water mixture separation with a water flux and separation efficiency of 46247 L·m^(-2)·h^(-1)and 99.5%,respectively.The wettability of W-MEL membranes was manipulated from hydrophilic to hydrophobic nature by chemically modifying with the fluorine-free compounds (hexadecyltrimethoxysilane (HDTMS) and dodecyltrimethoxysilane(DDTMS)) to achieve efficient oil-permselective separation of heavy oils from water.Among the hydrophobically modified W-MEL membranes,W-MEL-500-HDTMS having a water contact angle of146.4°delivers the best separation performance for dichloromethane/water mixtures with a constant oil flux and separation efficiency of 61490 L·m^(-2)·h^(-1)and 99.2%,respectively along with the stability tested up to 20 cycles.Both W-MEL-500-HDTMS and W-MEL-500-DDTMS membranes also exhibit similar separation performances for the separation of heavy oil from sea water along with a 20-fold lower corrosion rate in comparison with the bare stainless-steel mesh,indicating their excellent stability in seawater.Compared to the reported zeolite membranes for oil/water separation,the as-synthesized and hydrophobically modified W-MEL membranes shows competitive separation performances in terms of flux and separation efficiency,demonstrating the good potentiality for oil/water separation.
基金supported by the National Natural Science Foundation of China(Grant No.51473070).
文摘Because of the increasing amount of oily wastewater produced each day,it is important to develop superhydrophilic/underwater superoleophobic oil/water separation membranes with ultrahigh flux and high separation efficiency.In this paper,a superhydrophilic/underwater superoleophobic N-isopropylacrylamide-coated stainless steel mesh was prepared through a simple and convenient graft polymerization approach.The obtained mesh was able to separate oil/water mixtures only by gravity.In addition,the mesh showed high-efficiency separation ability(99.2%)and ultrahigh flux(235239 L·m^(−2)·h^(−1)).Importantly,due to the complex cross-linked bilayer structure,the prepared mesh exhibited good recycling performance and chemical stability in highly saline,alkaline and acidic environments.
基金supported by the Knowledge Innovation Program of the Chinese Academy of Sciences(Grant No.KJCX1-YW-21)
文摘The oil/water separation in a liquid-liquid cylindrical cyclone is experimentally studied in this article.The effects of the flow split-ratio and the flow rate on the oil/water separation performance are determined.From the experimental results,it is shown that with the increase of the flow split-ratio,the oil/water separation efficiency is enhanced at first,and an optimal flow split-ratio exists,beyond that optimal split-ratio,the watercut in the underflow keeps constant,while the oil content in the overflow begins to decrease.The process of the oil core structure formation and the phase distribution in the cyclone are determined by numerical simulations.Furthermore,the dependence of the separation efficiency on the Reynolds number and the flow split-ratio is investigated based on a dimensional analysis.A comparison between the predicted values and the experimental data shows a good agreement.
基金Supported by the Trans-century Training Programme Foundation for the Talents by the Ministry of Education of China (No.2002-48).
文摘Fouling-resistant ceramic-supported polymer composite membranes were developed for removal of oil-in-water (O/W) mieroemulsions. The composite membranes were featured with an asymmetric three-layer structure, i.e., a porous ceramic membrane substrate, a polyvinylidene fluoride (PVDF) ultrafiltration sub-layer, and a polyamide/polyvinyl alcohol (PVA) composite thin top-layer. The PVDF polymer was east onto the tubular porous ceramic membranes with an immersion precipitation method, and the polyamide/PVA composite thin top-layer was fabricated with an inteffaeial polymerization method. The effects of the sub-layer composition and the recipe in the inteffaeial polymerization for fabricating the top-layer on the structure and performance of composite membranes were systematically investigated. The prepared composite membranes showed a good performance for treating the O/W microemulsions with a mean diameter of about 2.41μm. At the operating pressure of 0.4MPa, the hydraulic permeability remained steadily about 190L·m^-2·h^-1, the oil concentration in the permeate was less than 1.6mg·L^-1, and the oil rejection coefficient was always higher than 98.5% throughout the operation from the beginning.
基金supported by the National Natural Science Foundation of China(51973100)the China Postdoctoral Science Foundation(2020M682125)+1 种基金the National Key Research and Development Project of China(2019YFC0121402)State Key Laboratory of Bio-Fibers and Eco-Textiles,Qingdao University(RZ2000003334).
文摘The frequent occurrence of crude oil leakage accidents and the massive discharge of industrial oily wastewater not only caused huge damage and pollution to the ecosystem but also wasted a lot of precious resources.Therefore,it is urgent to solve the worldwide problem of oil/water separation.As a leader in advanced fiber materials,nanofibrous materials prepared by electrospinning have the advantages of high permeability,high separation efficiency,large specific surface area,adjustable wettability,simple preparation process,and low cost,making it attracted more attention of researchers in oil/water separation.This article mainly reviews the recent progress of various electrospun nanofibrous materials for oil/water separation field.The preparation and synthesis of nanofibrous adsorbents,nanofibrous membranes,and nanofibrous aerogels in recent years based on different applications,design principles,and separation approaches are systematically summarized.Finally,this review discusses the challenges and future development directions in oil/water separation.
基金supported by the National Key Research and Development Program of China under the contract number of 2017YFB0308000Program of Innovation Academy for Green Manufacture,CAS(IAGM2020C04)+1 种基金the State Key Laboratory of Heavy Oil Processing(SKLOP201903001)Key Research and Development Program of Hebei Province,China(20374001D)。
文摘Discharging untreated oily wastewater into the environment disrupts the ecological balance,which is a global problem that requires urgent solutions.Superhydrophilic and superoleophilic fibrous medium(FM)effectively separated oil–water emulsion as it was hydrophobic underwater.But its separation efficiencies(SEs)first increased to 98.9%,then dropped to 97.6%in 10 min because of oil-fouling.To tackle this problem,FM deposited with 0%–10%silica nanoparticle(NPsFMs),then coated by fluorocarbon polymer(X-[CH_(2)CH_(2)O]nCH_(2)CH_(2)O-Y-NH-COOCH_(2)C4F9)(FCNPs FMs),was used to enhance its roughness and regulate its initial wettability to improve the anti-fouling property.FCFM and FCNPs FMs were hydrophobic and oleophobic in air and oleophobic underwater.Their water contact angles,oil contact angles and oil contact angles were 115.3°–121.1°,128.8°–136.5°,and 131.6°–136.7°,respectively,meeting the requirement of 90°–140°for coalescence separation.FCNPs FM-5 had the best separation performance with a constant value of 99.8%in 10 min,while that of FCNPs FM-10 slightly decreased to 99.5%.Theoretical released droplet(TRD)diameter,calculated by the square root of the product of pore radius and fiber diameter,was used for the evaluation of coalescence performance.Analyzed by two ideal models,TRD diameter and fiber diameter showed a parabola type relationship,proving that the separation efficiency was a collaborative work of wettability,pore size and fiber diameter.Also,it explained the SEs reduction from FCNPs FM-5 to FCNPs FM-10 was revelent to the three parameters.Moreover,FCNPsFMs effectively separated emulsions stabilized by cationic surfactant CTAB(SEs:97.3%–98.4%)and anionic surfactant SDBS(SEs:91.3%–93.4%).But they had an adverse effect on nonionic surfactant Tween-80 emulsion separation(SEs:94.0%–71.76%).Emulsions made by diverse oils can be effectively separated:octane(SEs:99.4%–100%),rapeseed oil(SEs:97.3%–98.8%),and diesel(SEs:95.2%–97.0%).These findings provide new insights for designing novel materials for oil–water separation by coalescence mechanism.
基金supported by a National Science and Technology Major Project(2017-VI-0007-0077)the National Defense Basic Scientific Research Program of China(JCIKYS2019607001)+3 种基金the National Defense S&T Pre-Research Foundation of China(6142905192509)the National Natural Science Foundation of China(51772246,51272210,50902112,and U1737209)the National Key R&D Program of China(2017YFB1103500 and 2017YFB1103501)Fundamental Research Funds for the Central Universities(3102019PJ008 and 3102018jcc002)。
文摘Superwetting surfaces have the potential to address oil pollution in water,through their ability to separate the two.However,it remains a great challenge to fabricate stable and efficient separation structures using conventional manufacturing techniques.Furthermore,the materials traditionally used for oil-water separation are not stable at high temperature.Therefore,there is a need to develop stable,customizable structures to improve the performance of oil-water separation devices.In recent years,3D printing technology has developed rapidly,and breakthroughs have been made in the fabrication of complicated ceramic structures using this technology.Here,a ceramic material with a gradient pore structure and superhydrophobic/superoleophilic properties was prepared using 3D printing for high-efficiency oil-water separation.The gradient pore structure developed here can support a flux of up to 25434 L/m^(2)h,which is nearly 40%higher than that an analogous structure with straight pores.At 200℃,the oil-water separation performance was maintained at 97.4%.Furthermore,samples of the material exhibited outstanding mechanical properties,and chemical stability in a variety of harsh environments.This study provides an efficient,simple,and reliable method for manufacturing oil-water separation materials using 3D printing,and may have broader implications for both fundamental research and industrial applications.
基金The authors gratefully acknowledge the financial support of the National Natural Science Foundation of China(Grant no.51703130)Zhejiang Provincial Natural Science Foundation of China(Grant no.LY18E080018)+1 种基金Shaoxing Public Welfare Project(Grant no.2017B70042)the International Science and Technology Cooperation Project of Shaoxing University(Grant no.2019LGGH1004).
文摘Stimuli-responsive materials with switchable wettability have promising practical applications in oil/water separation.A novel CO_(2)-responsive cotton fabric for controlled oil/water separation was fabricated based on mussel-inspired reaction and polymerized with 2-(dimethylamino)ethyl methacrylate(DMAEMA).As expected,the modified fabric exhibited switchable hydrophilicity and hydrophobicity after CO_(2)/N_(2) alternation,and it could be used for gravity-driven CO_(2)-controlled oil/water separation.Water was selectively penetrated through the fabric and separated from oil after treating by CO_(2).A reversed wettability could be generated through simply treated with N2.It is expected that the as-prepared fabrics could be applied in smart oil/water separation due to the attractive properties of CO_(2)-switchable system.
基金supported by the Scientific Research Funding Project of the Education Department of Liaoning Province (Grant No.LJ2020QNL002)。
文摘The design and development of new advanced superwetting porous membranes with antioil-fouling performance are still rare and highly desirable because of their potential widespread applications.A metallic phosphate nanoflower-covered mesh membrane with superhydrophilic and unprecedented antioil-fouling properties is prepared by an exceptionally simple and effective in-situ solution corrosion method.As demonstrated,the outstanding antioil-fouling property of the resulting mesh membrane is connected with the special phosphate group and the three-dimensional(3 D) nanoflower structure.Owing to the antioil-fouling property,upon to water,the oil-fouled mesh membrane can keep the surface free of various kinds of oils,including viscous crude oil to light n-hexane.Thanks to its unprecedented self-cleaning property,the superhydrophilic mesh membrane can effectively separate different oil/water mixtures without prior wetted by water,exhibiting great potential for practical spilled oil remediation.
基金Financial support from the National Natural Science Foundation of China (No. 51873192)Zhejiang Provincial Natural Science Foundation of China (No. LZ20E030002)。
文摘Surface deposition based on metal-phenolic networks(MPNs) has received increasing interest in recent years. The catechol structure is generally considered to be essential to the formation of MPNs. Our most recent results have demonstrated that some kinds of monophenols can form MPNs on substrate surfaces.Herein, we report a fast and effective surface-coating system based on the coordination of 3-(4-hydroxy-3-methoxyphenyl)-2-propenoic acid, a kind of monophenol, with Fe^(3+). Compared with other metal ions such as Cu^(2+)and Ni^(2+), Fe^(3+)with stronger electron acceptability can coordinate with the monophenol more strongly to form MPNs, and moreover, the deposition time significantly decreases to 40 min from generally 24 h. It is demonstrated that the deposition process is controlled by the coordination, Fe^(3+)hydrolysis, and deprotonation of the monophenol. The coatings endow substrates such as polypropylene microfiltration membrane with underwater superoleophobicity, which can be applied in oil/water separation with high separation efficiency and great long-term stability. In addition, the coated membranes are positively charged and thus are useful in selective adsorption of dyes. The present work not only provides a novel, fast, and one-step deposition method to fabricate MPNs, but also demonstrates that the fabrication efficiency of monophenol-based MPNs is comparable with that of polyphenol-based MPNs.
基金We gratefully acknowledge the financial support from the National Natural Science Foundation of China(Grant No.21576205)the Tianjin Natural Science Foundation(Grant No.18JCTPJC48600)the Training Project of Innovation Team of Colleges and Universities in Tianjin(GrantNo.TD13-5020).
文摘The increasing applications of seawater desalination technology have led to the wide usage of polyamide reverse osmosis membranes,resulting in a large number of wasted reverse osmosis membranes.In this work,the base nonwoven layer of the wasted reverse osmosis membrane was successfully modified into the hydrophobic membrane via surface deposition strategy including TiO_(2) and 1H,1H,2H,2H-perfluorooctyltrichlorosilane(PFOTS),respectively.Various techniques were applied to characterize the obtained membranes,which were then used to separate the oil–water system.The optimally modified membrane displayed good hydrophobicity with a contact angle of 135.2°±0.3°,and its oil–water separation performance was as high as 97.8%.After 20 recycle tests,the oil–water separation performance remained more than 96%,which was attributed to the film adhesion of the anchored TiO_(2) and PFOTS layer on the surface.This work might provide a new avenue for recycling the wasted reverse osmosis membrane used in oily wastewater purification.