Progress in Analytical Methods of Halogenated Disinfection By-Products

Ensuring the health and safety of drinking water is crucial for both nations and their citizens.Since the 20th century,the disinfection of drinking water,effectively controlling pathogens in water sources,has become one of the significant advances in public health.However,the disinfectants used in the process,such as chlorine and chlorine dioxide,react with natural organic matter in the water to produce disinfection by-products(DBPs).Most of these DBPs contain chlorine,and if the source water contains bromine or iodine,brominated or iodinated DBPs,collectively referred to as Halogenated disinfection byproducts(X-DBPs),are formed.Numerous studies have found that X-DBPs pose potential risks to human health and the environment,leading to widespread concern.Mass spectrometry has become an important means of discovering new types of X-DBPs.This paper focuses on the study of methods for analyzing X-DBPs in drinking water using mass spectrometry.

Silver nanoparticles on UiO-66(Zr)metal-organic frameworks for water disinfection application

Drinking water disinfection is an essential process to assure public health all over the world.In this study,silver nanoparticles(AgNPs)on UiO-66(Zr)Metal-Organic Frameworks(Ag@UiO-66)is proposed as a potential water disinfection strategy.AgNPs are synthesized using polyvinyl pyrrolidone(PVP)as stabilizing agent,and sodium borohydride as reducing agent are subsequently embedded on UiO-66,a high-stability organometallic framework.The effect of premixing time,reaction time and reactant concentration on the loading rate of AgNPs on UiO-66 was investigated.The maximum load rate of AgNPs on UiO-66 could reach 13%when the premixing time is 3 h,the reaction time is 45 min and the concentration of AgNO_(3) is10μg/mL.The formation of AgNPs loaded on UiO-66 was observed and confirmed with ultraviolet and visible spectrophotometry(UV-Vis),scanning electron microscopy(SEM),infrared emission spectroscopy(IES)and X-ray diffraction(XRD)analysis.Ag@UiO-66 exhibited strong antibacterial activity against both Gramnegative Escherichia coli and Gram-positive Staphylococcus aureus,with minimum inhibitory concentrations(MIC)of 64 and 128μg/mL,respectively.The germicidal efficacy of Ag@UiO-66 enhanced significantly as the temperature rose from 4℃to 37℃.The results indicate that Ag@UiO-66 is potential candidate as a feasible water disinfection material.

The Disinfection of Drinking Water in Trunk Water Mains

This study aimed to explore the disinfection of drinking water in trunk water mains, based on published conditions denoted within the Irish Republic. The variables within the study were consumer draw-off rates, trunk main length, pipe diameter, and water temperature. All these factors are known to impact the free chlorine residual in operational supply networks. Based on published conditions obtained within the literature review, 60 hypothetical trunk mains were generated for this study. Of primary concern were the variables that affect the chlorine decay rate;total amount of chlorine decay;available amount of chlorine in the periphery of the trunk main;and the costs associated with effective chlorine disinfection of trunk mains. Based on the analysis performed, the following were the salient observations: 1) Low consumer draw-off rates and increased trunk main length and diameter increased the risk of the free chlorine residual in the periphery of the trunk mains not complying with the Environmental Protection Agency’s (EPA) minimum recommended residual value of 0.1 mg/l (EPA Drinking Water Audit Report, 2014). 2) Increasing the diameter of the trunk main from 125 mm to 180 mm had a negligible effect on the chlorine decay rate. However, increasing the trunk main diameter from 125 mm to 180 mm was shown to have a major impact on the total amount of chlorine decay and free chlorine residual available in the periphery of the main. The key parameters that affected disinfection costs associated with trunk mains include length, diameter and the need for chlorine boosting.

Design of Water Disinfection Scheme for Rural Drinking Water Safety Project

As further promotion of the rural drinking water safety project in whole country, small villages in vast countryside have been or will be equipped with safety drinking water project. We analyzed necessity of the rural drinking water disinfection, discussed disinfection method suitable for rural drinking water characteristics, and put forward disinfection schemes for different water supply sources.

Comparison of Anolyte and Chlorine Dioxide for a Continuous Hot Water Disinfection in Nursing Home: A Two Years Legionnaires’ Disease Prevention

Worldwide epidemiological reports assert that drinking water is a source for infections and Legionella control represents a critical issue in healthcare settings. Chemical disinfections of water networks are control measures that need to be fine-tuned to obtain satisfactory results in large buildings over prolonged time periods. Aim of study is the evaluation of the effect of anolyte and chlorine dioxide, applied in two different hot water networks of a nursing home to manage Legionella risk. Nursing home has two buildings (A and B), with the same point of aqueduct water entrance. From June 2016, following a shock chlorination, the continuous disinfections with chlorine dioxide and anolyte were applied in hot networks of building A and B, respectively. Hot water was sampled at the central heating system and at two points of use for Legionella research, while chemical tests of manganese (Mn), iron (Fe), zinc (Zn) and trihalomethanes compounds (THM) were implemented to evaluate the disinfection by-products presence. Before chlorination Legionella pneumophila sg1 was recovered with a mean count of 2.4 × 104 CFU/L, while chemical compounds concentrations were within the law limits (Directive 98/83/EC). Then the disinfections Legionella was not recovered in both hot water plants. After the disinfection with chlorine dioxide (from June 2016 to May 2018), a statistically significant increase of iron, zinc and THM concentrations was detected in building A (p = 0.012;p = 0.004;p = 0.008). Both disinfectants appear effective against Legionella spp. growth in water network, but anolyte ensures a lower disinfection by-products release.

Solar photocatalytic pathogenic disinfection:Fundamentals to state-of-the-art

It is necessary to treat pathogen-infected water before its utilisation.Of conventionally used treatment methods,solar photocatalysis has gained considerable momentum owing to its operational simplicity and capacity to use freely and abundantly available solar energy.This article systematically reviewed the disinfection of water with photocatalysis.It addressed the concerns of microbial infection of water and the fundamentals behind its treatment with photocatalysis.It presented an in-depth description of pathogenic deactivation with powerful reactive oxygen species.Special emphasis was given to process intensification as it is an attractive technique that provides multifunctionality and/or equipment miniaturisation.Solar reactor design regarding mobilised/immobilised photocatalysts and compound parabolic concentrators were elucidated.Finally,key parameters governing photoperformance,corresponding trade-offs,and the need for their optimisation were discussed.Overall,this article is a single point of reference for researchers,environmentalists,and industrialists who address the ever-severing challenge of providing clean water whilst also maintaining energy sustainability.

Disinfection Byproducts and Their Precursors in Drinking Water Sources:Origins,Influencing Factors,and Environmental Insights

Tracing the contamination origins in water sources and identifying the impacts of natural and human processes are essential for ecological safety and public health.However,current analysis approaches are not ideal,as they tend to be laborious,time-consuming,or technically difficult.Disinfection byproducts(DBPs)are a family of well-known secondary pollutants formed by the reactions of chemical disinfectants with DBP precursors during water disinfection treatment.Since DBP precursors have various origins(e.g.,natural,domestic,industrial,and agricultural sources),and since the formation of DBPs from different precursors in the presence of specific disinfectants is distinctive,we argue that DBPs and DBP precursors can serve as alternative indicators to assess the contamination in water sources and identify pollution origins.After providing a retrospective of the origins of DBPs and DBP precursors,as well as the specific formation patterns of DBPs from different precursors,this article presents an overview of the impacts of various natural and anthropogenic factors on DBPs and DBP precursors in drinking water sources.In practice,the DBPs(i.e.,their concentration and speciation)originally present in source water and the DBP precursors determined using DBP formation potential tests—in which water samples are dosed with a stoichiometric excess of specific disinfectants in order to maximize DBP formation under certain reaction conditions—can be considered as alternative metrics.When jointly used with other water quality parameters(e.g.,dissolved organic carbon,dissolved organic nitrogen,fluorescence,and molecular weight distribution)and specific contaminants of emerging concern(e.g.,certain pharmaceuticals and personal care products),DBPs and DBP precursors in drinking water sources can provide a more comprehensive picture of water pollution for better managing water resources and ensuring human health.

Water disinfection:Advances in photocatalysis and piezo/triboelectric catalysis with progressively enhanced energy utilization

Increasing climate-related extreme weather events and conflicts hinder safe water sanitation for vulnerable populations.In developing areas,centralized water systems are impractical due to high costs and poor infrastructure.Thus,technologies utilizing renewable energy like solar and mechanical energy for water treatment hold promise.It is critical to develop photocatalysts and piezo-electric/triboelectric catalysts that capture solar energy as well as mechanical energy to generate disinfectants to maximize energy utilization.The latest advancements in principles,materials,and processes utilizing solar and mechan-ical energy for water disinfection are highlighted in this review.First,we elucidate both direct and indirect mechanisms of sunlight-mediated water dis-infection,discuss the evolution of photocatalysts from simple UV absorption to visible-light utilization,and even near-infrared light exploitation to enhance solar spectrum utilization efficiency.Furthermore,we delve into the fundamen-tal principles of piezoelectricity and triboelectricity relying on mechanical energy conversion as well as summarize the development of piezo/triboelectric cat-alysts from being driven by high-frequency energy to utilizing low-frequency mechanical energy from the environment.Finally,challenges and directions for efficient systems are outlined to inspire rational design strategies and accel-erate the production of superior catalytic systems applicable across a broad range.

Removal of disinfection by-products formation potential by biologically intensified process

The removal of disinfection by-products formation potential(DBPFP) in artificially intensified biological activated carbon(IBAC) process which is developed on the basis of traditional ozone granular activated carbon was evaluated. By IBAC removals of 31% and 68% for THMFP and HAAFP were obtained respectively. Under identical conditions, the removals of the same substances were 4% and 32% respectively only by the granular activated carbon(GAC) process. Compared with GAC, the high removal rates of the two formed potential substances were due to the increasing of bioactivity of the media and the synergistic capabilities of biological degradation cooperating with activated carbon adsorption of organic compounds. A clear linear correlation(R 2=0.9562 and R 2=0.9007) between DOC HAAFP removal rate and Empty Bed Contact Time(EBCT) of IBAC process was observed, while that between THMFP removal rate and EBCT of GAC was R 2=0.9782. In addition certain linear correlations between THMFP, HAAFP and UV 254 (R 2=0.855 and R 2=0.7702) were found for the treated water. For IBAC process there are also more advantages such as long backwashing cycle time, low backwashing intensity and prolonging activated carbon lifetime and so on.

Health Risk Assessment of Employees Exposed to Chlorination By-products of Recreational Water in Large Amusement Parks in Shanghai

Objective Chlorination is often used to disinfect recreational water in large amusement parks;however,the health hazards of chlorination disinfection by-products(DBPs)to occupational populations are unknown.This study aimed to assess the exposure status of chlorinated DBPs in recreational water and the health risks to employees of large amusement parks.Methods Exposure parameters of employees of three large amusement parks in Shanghai were investigated using a questionnaire.Seven typical chlorinated DBPs in recreational water and spray samples were quantified by gas chromatography,and the health risks to amusement park employees exposed to chlorinated DBPs were evaluated according to the WHO's risk assessment framework.Results Trichloroacetic acid,dibromochloromethane,bromodichloromethane,and dichloroacetic acid were detected predominantly in recreational water.The carcinogenic and non-carcinogenic risks of the five DBPs did not exceed the risk thresholds.In addition,the carcinogenic and non-carcinogenic risks of mixed exposure to DBPs were within the acceptable risk limits.Conclusion Typical DBPs were widely detected in recreational water collected from three large amusement parks in Shanghai;however,the health risks of DBPs and their mixtures were within acceptable limits.

Identification of key precursors contributing to the formation of CX_(3)R-type disinfection by-products along the typical full-scale drinking water treatment processes

Identification and characterization of disinfection by-product(DBP)precursors could help optimize drinkingwater treatment processes and improve the quality of finishedwater.This study comprehensively investigated the characteristics of dissolved organic matter(DOM),the hydrophilicity and molecule weight(MW)of DBP precursor and DBP-associated toxicity along the typical full-scale treatment processes.The results showed that dissolved organic carbon and dissolved organic nitrogen content,the fluorescence intensity and the SUVA254 value in raw water significantly decreased after the whole treatment processes.Conventional treatment processes were in favor of the removal of high-MW and hydrophobic DOM,which are important precursors of trihalomethane and haloacetic acid.Compared with conventional treatment processes,Ozone integrated with biological activated carbon(O3-BAC)processes enhanced the removal efficiencies of DOM with different MW and hydrophobic fractions,leading to a further decrease in almost all DBP formation potential and DBP-associated toxicity.However,almost 50%of the detected DBP precursors in raw water has not been removed after the coagulation-sedimentation-filtration integrated with O3-BAC advanced treatment processes.These remaining precursors were found to be mainly hydrophilic and low-MW(<1.0 kDa)organics.Moreover,they would largely contribute to the formation of haloacetaldehydes and haloacetonitriles,which dominated the calculated cytotoxicity.Since current drinking water treatment process could not effectively control the highly toxic DBPs,the removal of hydrophilic and low-MW organics in drinking water treatment plants should be focused on in the future.

Formation and control of disinfection byproducts and toxicity during reclaimed water chlorination： A review

Chlorination is essential to the safety of reclaimed water; however, this process leads to concern regarding the formation of disinfection byproducts（DBPs） and toxicity. This study reviewed the formation and control strategies for DBPs and toxicity in reclaimed water during chlorination.Both regulated and emerging DBPs have been frequently detected in reclaimed water during chlorination at a higher level than those in drinking water, indicating they pose a greater risk to humans. Luminescent bacteria and Daphnia magna acute toxicity, anti-estrogenic activity and cytotoxicity generally increased after chlorination because of the formation of DBPs. Genotoxicity by umu-test and estrogenic activity were decreased after chlorination because of destruction of toxic chemicals. During chlorination, water quality significantly impacted changes in toxicity.Ammonium tended to attenuate toxicity changes by reacting with chlorine to form chloramine,while bromide tended to aggravate toxicity changes by forming hypobromous acid. During pretreatment by ozonation and coagulation, disinfection byproduct formation potential（DBPFP）and toxicity formation potential（TFP） occasionally increase, which is accompanied by DOC removal; thus, the decrease of DOC was limited to indicate the decrease of DBPFP and TFP. It is more important to eliminate the key fraction of precursors such as hydrophobic acid and hydrophilic neutrals. During chlorination, toxicities can increase with the increasing chlorine dose and contact time. To control the excessive toxicity formation, a relatively low chlorine dose and short contact time were required. Quenching chlorine residual with reductive reagents also effectively abated the formation of toxic compounds.

Impact of disinfection on drinking water biofilm bacterial community

Disinfectants are commonly applied to control the growth of microorganisms in drinking water distribution systems. However, the effect of disinfection on drinking water microbial community remains poorly understood. The present study investigated the impacts of different disinfectants（chlorine and chloramine） and dosages on biofilm bacterial community in bench-scale pipe section reactors. Illumina MiS eq sequencing illustrated that disinfection strategy could affect both bacterial diversity and community structure of drinking water biofilm. Proteobacteria tended to predominate in chloraminated drinking water biofilms, while Firmicutes in chlorinated and unchlorinated biofilms. The major proteobacterial groups were influenced by both disinfectant type and dosage. In addition, chloramination had a more profound impact on bacterial community than chlorination.

Identification of unknown disinfection byproducts in drinking water produced from Taihu Lake source water

Although disinfection byproducts(DBPs) in drinking water have been suggested as a cancer causing factor, the causative compounds have not yet been clarified. In this study, we used liquid chromatography quadrupole-time-of-flight spectrometry(LC-QTOF MS) to identify the unknown disinfection byproducts(DBPs) in drinking water produced from Taihu Lake source water, which is known as a convergence point for the anthropogenic pollutants discharged from intensive industrial activities in the surrounding regions. In total, 91 formulas of DBPs were discovered through LC-QTOF MS nontarget screen, 81 of which have not yet been reported. Among the 91 molecules, 56 only contain bromine, 15 only contain chlorine and 20 DBPs have both bromine and chlorine atoms. Finally, five DBPs including 2,4,6-tribromophenol, 2,6-dibromo-4-chlorophenol, 2,6-dichloro-4-bromophenol, 4-bromo-2,6-di-tert-butylphenol and 3,6-dibromocarbazole were confirmed using standards. The former three compounds mainly formed in the predisinfection step(maximum concentration, 0.2-2.6 μg/L), while the latter two formed in the disinfection step(maximum concentration, 18.2-33.6 ng/L). In addition, 19 possible precursors of the discovered DBPs were detected, with the aromatic compounds being a major group. 2,6-di-tert-butylphenol as the precursor of 4-bromo-2,6-di-tert-butylphenol was confirmed with standard, with a concentration of 20.3 μg/L in raw water. The results of this study show that brominated DBPs which are possibly formed from industrial pollutants are relevant DBP species in drinking water produced form Taihu source water, suggesting protection of Taihu Lake source water is important to control the DBP risks.

Nontargeted identification of peptides and disinfection byproducts in water

A broad range of organic compounds are known to exist in drinking water sources and serve as precursors of disinfection byproducts（DBPs）.Epidemiological findings of an association of increased risk of bladder cancer with the consumption of chlorinated water has resulted in health concerns about DBPs.Peptides are thought to be an important category of DBP precursors in water.However,little is known about the actual presence of peptides and their DBPs in drinking water because of their high sample complexity and low concentrations.To address this challenge and identify peptides and non-chlorinated/chlorinated peptide DBPs from large sets of organic compounds in water,we developed a novel high throughput analysis strategy,which integrated multiple solid phase extraction（SPE）,high performance liquid chromatography（HPLC）separation,and non-target identification using precursor ion exclusion（PIE）high resolution mass spectrometry（MS）.After MS analysis,structures of candidate compounds,particularly peptides,were obtained by searching against the Human Metabolome Database（HMDB）.Using this strategy,we successfully detected 625 peptides（out of 17,205 putative compounds）and 617 peptides（out of 13,297）respectively in source and finished water samples.The source and finished water samples had 501 peptides and amino acids in common.The remaining 116 peptides and amino acids were unique to the finished water.From a subset of 30 putative compounds for which standards were available,25 were confirmed using HPLC-MS analysis.By analyzing the peptides identified in source and finished water,we successfully confirmed three disinfection reaction pathways that convert peptides into toxic DBPs.

Changes in soil temperature and water content under mobile soil steam disinfection

The soil steam injection method is one of the most effective disinfection methods,and the determination of the steam pipe structure parameters is very important.The steam capillary diameter(SCD)affects the steam flow field in each pipe,which in turn affects the steam changes in the soil flow range and soil temperature(ST).Larger SCD would make lower ST in clay loam,silt loam,and sandy clay loam.The effectiveness of an SCD of 10 mm was verified by a mobile disinfection test at walking speeds of 10 cm/min and 30 cm/min under soil water content(SWC)of 15%and 35%,respectively.The results showed that when the walking speed was 10 cm/min,the initial SWC was proportional to the ST.However,when the walking speed was 30 cm/min,the law was exactly the opposite;that is,the initial water content is inversely proportional to the ST.The research can provide a theoretical research foundation for increasing soil temperature for efficient soil steam disinfection.

News:The 595^(th) Session of the Xiangshan Science Conferences focused on water disinfection by-products

The 595th session of the Xiangshan Science Conferences was recently held in Fragrant Hill Hotel,Beijing,on May 22-23,2017.The theme of this highly successful session was on＂Health Risk ad Control of Disinfection By-products（DBPs）in China＂.More than fifty prominent scientists from Australia,Canada,China,and the United States actively participated in the two-day meeting and engaged in lively discussions.

News: JES well represented at the recent Gordon Research Conference on Drinking Water Disinfection By-products

The Gordon Research Conference （GRC） on Drinking Water Disinfection By-products （DBPs） was recently held in Mount Holyoke College, South Hadley, Massachusetts, United States, on July 30-August 4, 2017. The theme of this year＇s GRC on DBPs was ＂Disinfection 2100： Linking Engineering, Chemistry, Toxicology, and Epidemiology to Reduce Exposure to Toxicity Drivers while Curtailing Pathogens＂ （GRC, 2017）. More than one hundred and fifty scientists from around the world actively participated in the week-long conference.

Bacteria inactivation by sulfate radical:progress and non-negligible disinfection by-products

Sulfate radicals have been increasingly used for the pathogen inactivation due to their strong redox ability and high selectivity for electron-rich species in the last decade.The application of sulfate radicals in water disinfection has become a very promising technology.However,there is currently a lack of reviews of sulfate radicals inactivated pathogenic microorganisms.At the same time,less attention has been paid to disinfection by-products produced by the use of sulfate radicals to inactivate microorganisms.This paper begins with a brief overview of sulfate radicals’properties.Then,the progress in water disinfection by sulfate radicals is summarized.The mechanism and inactivation kinetics of inactivating microorganisms are briefly described.After that,the disinfection by-products produced by reactions of sulfate radicals with chlorine,bromine,iodide ions and organic halogens in water are also discussed.In response to these possible challenges,this article concludes with some specific solutions and future research directions.

Regulating crystallinity in linear conjugated polymer to boost the internal electric field for remarkable visible-light-driven disinfection

Conjugated linear polymers are promising metal-free photocatalysts for visible-light-driven photocatalytic water disinfection,but it was still bottlenecked by the insufficient photogenerated charge separation and transport(CST)process.Herein,we obtained the highly crystalline imine-linked conjugated linear poly-mer(ODA-BPAH)with a greatly enhanced CST process.The highly crystalline ODA-BPAH exhibited excel-lent broad-spectrum water disinfection efficiency up to 99.99999%in 1 h,which is among the reported highest of state-of-the-art photocatalysts.The crystallinity of ODA-BPAH was regulated by simply turn-ing the solvent and the experiment results revealed that the ODA-BPAH with high crystallinity exhibited higher internal electric field strength and photocatalytic performance than that with low crystallinity,which indicates that higher crystallinity in linear conjugated polymers contributes to superior CST ef-ficiency as well as the generation of reactive oxygen species.This work highlights the impact of poly-mer crystallinity on the internal electric field and proves that linear poly-imine could be a new type of promising metal-free photocatalyst for water treatment.