Towards high-performance and robust anion exchange membranes(AEMs)for water electrolysis:Super-acid-catalyzed synthesis of AEMs

The increasing demand for hydrogen energy to address environmental issues and achieve carbon neutrality has elevated interest in green hydrogen production,which does not rely on fossil fuels.Among various hydrogen production technologies,anion exchange membrane water electrolyzer(AEMWE)has emerged as a next-generation technology known for its high hydrogen production efficiency and its ability to use non-metal catalysts.However,this technology faces significant challenges,particularly in terms of the membrane durability and low ionic conductivity.To address these challenges,research efforts have focused on developing membranes with a new backbone structure and anion exchange groups to enhance durability and ionic conductivity.Notably,the super-acid-catalyzed condensation(SACC)synthesis method stands out due to its user convenience,the ability to create high molecular weight(MW)polymers,and the use of oxygen-tolerant organic catalysts.Although the synthesis of anion exchange membranes(AEMs)using the SACC method began in 2015,and despite growing interest in this synthesis approach,there remains a scarcity of review papers focusing on AEMs synthesized using the SACC method.The review covers the basics of SACC synthesis,presents various polymers synthesized using this method,and summarizes the development of these polymers,particularly their building blocks including aryl,ketone,and anion exchange groups.We systematically describe the effects of changes in the molecular structure of each polymer component,conducted by various research groups,on the mechanical properties,conductivity,and operational stability of the membrane.This review will provide insights into the development of AEMs with superior performance and operational stability suitable for water electrolysis applications.

Development of advanced anion exchange membrane from the view of the performance of water electrolysis cell

Green hydrogen produced by water electrolysis combined with renewable energy is a promising alternative to fossil fuels due to its high energy density with zero-carbon emissions.Among water electrolysis technologies,the anion exchange membrane(AEM) water electrolysis has gained intensive attention and is considered as the next-generation emerging technology due to its potential advantages,such as the use of low-cost non-noble metal catalysts,the relatively mature stack assembly process,etc.However,the AEM water electrolyzer is still in the early development stage of the kW-level stack,which is mainly attributed to severe performance decay caused by the core component,i.e.,AEM.Here,the review comprehensively presents the recent progress of advanced AEM from the view of the performance of water electrolysis cells.Herein,fundamental principles and critical components of AEM water electrolyzers are introduced,and work conditions of AEM water electrolyzers and AEM performance improvement strategies are discussed.The challenges and perspectives are also analyzed.

Electrochemical synthesis of trimetallic nickel-iron-copper nanoparticles via potential-cycling for high current density anion exchange membrane water-splitting applications

Hydrogen is known for its elevated energy density and environmental compatibility and is a promising alternative to fossil fuels.Alkaline water electrolysis utilizing renewable energy sources has emerged as a means to obtain high-purity hydrogen.Nevertheless,electrocatalysts used in the process are fabricated using conventional wet chemical synthesis methods,such as sol-gel,hydrothermal,or surfactantassisted approaches,which often necessitate intricate pretreatment procedures and are vulnerable to post-treatment contamination.Therefore,this study introduces a streamlined and environmentally conscious one-step potential-cycling approach to generate a highly efficient trimetallic nickel-iron-copper electrocatalyst in situ on nickel foam.The synthesized material exhibited remarkable performance,requiring a mere 476 mV to drive electrochemical water splitting at 100 mA cm^(-2)current density in alkaline solution.Furthermore,this material was integrated into an anion exchange membrane watersplitting device and achieved an exceptionally high current density of 1 A cm^(-2)at a low cell voltage of2.13 V,outperforming the noble-metal benchmark(2.51 V).Additionally,ex situ characterizations were employed to detect transformations in the active sites during the catalytic process,revealing the structural transformations and providing inspiration for further design of electrocatalysts.

Electrochemical reconstruction of non-noble metal-based heterostructure nanorod arrays electrodes for highly stable anion exchange membrane seawater electrolysis

Direct seawater electrolysis for hydrogen production has been regarded as a viable route to utilize surplus renewable energy and address the climate crisis.However,the harsh electrochemical environment of seawater,particularly the presence of aggressive Cl^(-),has been proven to be prone to parasitic chloride ion oxidation and corrosion reactions,thus restricting seawater electrolyzer lifetime.Herein,hierarchical structure(Ni,Fe)O(OH)@NiCoS nanorod arrays(NAs)catalysts with heterointerfaces and localized oxygen vacancies were synthesized at nickel foam substrates via the combination of hydrothermal and annealing methods to boost seawater dissociation.The hiera rchical nanostructure of NiCoS NAs enhanced electrode charge transfer rate and active surface area to accelerate oxygen evolution reaction(OER)and generated sulfate gradient layers to repulsive aggressive Cl^(-).The fabricated heterostructure and vacancies of(Ni,Fe)O(OH)tuned catalyst electronic structure into an electrophilic state to enhance the binding affinity of hydroxyl intermediates and facilitate the structural transformation into amorphousγ-NiFeOOH for promoting OER.Furthermore,through operando electrochemistry techniques,we found that theγ-NiFeOOH possessing an unsaturated coordination environment and lattice-oxygen-participated OER mechanism can minimize electrode Cl^(-)corrosion enabled by stabilizing the adsorption of OH*intermediates,making it one of the best OER catalysts in the seawater medium reported to date.Consequently,these catalysts can deliver current densities of 100 and 500 mA cm-2for boosting OER at minimal overpotentials of 245and 316 mV,respectively,and thus prevent chloride ion oxidation simultaneously.Impressively,a highly stable anion exchange membrane(AEM)seawater electrolyzer based on the non-noble metal heterostructure electrodes reached a record low degradation rate under 100μV h-1at constant industrial current densities of 400 and 600 mA cm-2over 300 h,which exhibits a promising future for the nonprecious and stable AEMWE in the direct seawater electrolysis industry.

Spatiotemporal characteristics of water exchange between the Andaman Sea and the Bay of Bengal

A high-resolution customized numerical model is used to analyze the water transport in the three major water passages between the Andaman Sea(AS)and the Bay of Bengal,i.e.,the Preparis Channel(PC),the Ten Degree Channel(TDC),and the Great Channel(GC),based on the daily averaged simulation results ranging from 2010 to 2019.Spectral analysis and Empirical Orthogonal Function(EOF)methods are employed to investigate the spatiotemporal variability of the water exchange and controlling mechanisms.The results of model simulation indicate that the net average transports of the PC and GC,as well as their linear trend,are opposite to that of the TDC.This indicates that the PC and the GC are the main inflow channels of the AS,while the TDC is the main outflow channel of the AS.The transport variability is most pronounced at surface levels and between 100 m and 200 m depth,likely affected by monsoons and circulation.A 182.4-d semiannual variability is consistently seen in all three channels,which is also evident in their second principal components.Based on sea level anomalies and EOF analysis results,this is primarily due to equatorial winds during the monsoon transition period,causing eastward movement of Kelvin waves along the AS coast,thereby affecting the spatiotemporal characteristics of the flow in the AS.The first EOF of the PC flow field section shows a split at 100 m deep,likely due to topography.The first EOF of the TDC flow field section is steady but has potent seasonal oscillations in its time series.Meanwhile,the first EOF of the GC flow field section indicates a stable surface inflow,probably influenced by the equatorial Indian Ocean’s eastward current.

A comparative study of the land-atmosphere energy and water exchanges over the Tibetan Plateau and the Yangtze River Region

正确认识不同区域能量和水分循环特征是研究局地地气相互作用及准确预测区域天气,气候变化的关键.为了研究属于干旱/半干旱气候的青藏高原(TP)和湿润/半湿润气候的长江流域(YRR)之间地表能量和水分交换的异同,本文对比分析了两个区域8个不同地表类型(包括高山荒漠,高山草地,(平原)城市和(平原)草地等)观测站点的地表辐射和能量通量数据.结果显示:(1)TP由于高原大气层稀薄且空气洁净,年平均入射短波辐射为251.3W m^(-2),是YRR的1.7倍.加之高原地表反照率高导致反射辐射(59.6 W m^(-2))是YRR的2.87倍.入射及出射的长波辐射为231.5和338.0 W m^(-2),分别为YRR的0.64和0.83.而两个区域的净辐射差异不大;(2)草地站更多的潜热释放使得地表总加热效率高于城市和高山荒漠,TP和YRR的草地站的年平均潜热分别为35.0和38.8 W m^(-2),而植被稀疏且土壤干燥的高山荒漠地区感热最大,年平均感热为42.1 W m^(-2);其次是城市下垫面,其年平均感热为37.7 W m^(-2).研究结果揭示了不同气候背景下典型下垫面地气相互作用特征,为地气相互作用过程深入分析奠定了基础.

The fate of carbon resulting from pore water exchange in a mangrove and Spartina alterniflora ecozone

Mangrove and salt-marsh wetlands are important coastal carbon sinks.In order to quantify carbon export via pore water exchange and to evaluate subsequent fate of the exported carbon,we carried out continuous observations in a mangrove-Spartina alterniflora ecozone in the Zhangjiang River Estuary,China.The carbon fluxes via pore water exchange were estimated using^(222)Rn and^(228)Ra as tracers to be(2.15±0.63)mol/(m^(2)∙d)for dissolved inorganic carbon(DIC)and(-0.008±0.07)mol/(m^(2)∙d)for dissolved organic carbon(DOC)in the wet season and(3.02±0.65)mol/(m^(2)∙d)for DIC and(-0.15±0.007)mol/(m^(2)∙d)for DOC in the dry season in the mangrove-dominated creek(M-creek),while(2.52±0.82)mol/(m^(2)∙d)for DIC and(0.02±0.09)mol/(m^(2)∙d)for DOC in the dry season in the S.alterniflora-dominated creek(SA-creek).The negative value means that pore water was a sink of DOC in the creek.The total carbon via pore water exchange in the tidal creeks in the mangroves accounted for 41%-55%of the net carbon fixed by mangrove vegetation and was 3-4 times as much as the soil carbon accretion in the mangroves.The exported carbon in the form of DIC contributed all of the carbon outwelling from the M-creek and 79%of the carbon outwelling from the SA-creek,implying effective fixation of carbon by the wetland ecosystem.Moreover,it resulted in 54%in the dry season,75%in the wet season of the carbon dioxide released from the M-creek to the atmosphere,and 84%of the release from the SA-creek.Therefore,quantification of pore water exchange and related soil carbon loss is essential to trace the fate of carbon fixed in intertidal wetlands.

Technical factors affecting the performance of anion exchange membrane water electrolyzer

Anion exchange membrane(AEM)electrolysis is a promising membrane-based green hydrogen production technology.However,AEM electrolysis still remains in its infancy,and the performance of AEM electrolyzers is far behind that of well-developed alkaline and proton exchange membrane electrolyzers.Therefore,breaking through the technical barriers of AEM electrolyzers is critical.On the basis of the analysis of the electrochemical performance tested in a single cell,electrochemical impedance spectroscopy,and the number of active sites,we evaluated the main technical factors that affect AEM electrolyzers.These factors included catalyst layer manufacturing(e.g.,catalyst,carbon black,and anionic ionomer)loadings,membrane electrode assembly,and testing conditions(e.g.,the KOH concentration in the electrolyte,electrolyte feeding mode,and operating temperature).The underlying mechanisms of the effects of these factors on AEM electrolyzer performance were also revealed.The irreversible voltage loss in the AEM electrolyzer was concluded to be mainly associated with the kinetics of the electrode reaction and the transport of electrons,ions,and gas-phase products involved in electrolysis.Based on the study results,the performance and stability of AEM electrolyzers were significantly improved.

Pore-Scale Investigation of Coupled Two-Phase and Reactive Transport in the Cathode Electrode of Proton Exchange Membrane Fuel Cells

A three-dimensional multicomponent multiphase lattice Boltzmann model(LBM)is established to model the coupled two-phase and reactive transport phenomena in the cathode electrode of proton exchange membrane fuel cells.The gas diff usion layer(GDL)and microporous layer(MPL)are stochastically reconstructed with the inside dynamic distribution of oxygen and liquid water resolved,and the catalyst layer is simplifi ed as a superthin layer to address the electrochemical reaction,which provides a clear description of the fl ooding eff ect on mass transport and performance.Diff erent kinds of electrodes are reconstructed to determine the optimum porosity and structure design of the GDL and MPL by comparing the transport resistance and per-formance under the fl ooding condition.The simulation results show that gradient porosity GDL helps to increase the reactive area and average concentration under fl ooding.The presence of the MPL ensures the oxygen transport space and reaction area because liquid water cannot transport through micropores.Moreover,the MPL helps in the uniform distribution of oxygen for an effi cient in-plane transport capacity.Crack and perforation structures can accelerate the water transport in the assembly.The systematic perforation design yields the best performance under fl ooding by separating the transport of liquid water and oxygen.

Relation Matrix of Water Exchange for Sea Bays and Its Application

Water exchange is an important hydrodynamic character of sea bays, and it is the basis for the study of the environmental capacity of sea bays. In this paper, a relation matrix is set up to describe the interaction among different areas of a sea bay, and to predict the water quality of those areas. The relation matrix is calculated based on the numerical results from a water quality model. This method is applied to the study of water exchange and the prediction of water quality of the Bohai Sea. The Bohai Sea is divided into five areas, and the effect of seasonal wind is taken into consideration. The results show a） the relation matrix can be used to study the water exchange among different areas and predict water quality of different areas at the respective characteristic time, b） the reduction of pollutant is dependent on both water exchange and initial distribution of the pollutant, and c） the half-life time of the pollutant is longer than the half-exchange time of the sea water.

Evidence for water exchange between the South China Sea and the Pacific Ocean through the Luzon Strait

An analysis of historical oxygen data provides evidence on the water exchange between theSouth China Sea (SCS) and the Pacific Ocean (PO). In the vicinity of the Luzon Strait (LS) , the dissolved oxygen concentration of sea water is found to be lower on the Pacific side than on the SCS side at depths between 700 and 1500 m (intermediate layer) , while the situation is reversed above 700 m (upper layer) and below 1 500 m (deep layer). The evidence suggests that water exits the SCS in the intermediate layer but enters it from the Pacific in both the upper and the deep layers, supporting the earlier speculation that the Luzon Strait transport has a sandwiched structure in the vertical. Within the SCS basin, the oxygen distribution indicates widespread vertical movement, including the upwelling in the intermediate layer and the downwelling in the deep layer.

Numerical Simulation of Water Exchange Characteristics of the Jiaozhou Bay Based on A Three-Dimensional Lagrangian Model

Based on theory of three-dimensional hydrodynamics, an Euler-Lagrangian particle model is established to study the transport and water exchange capability in the Jiaozhou Bay. The three-dimensional hydrodynamic model, driven by tide and wind, is used to study the effects of wetting and drying of estuarine intertidal flats by the dry-wet grid technology based on the Estuarine, Coastal and Ocean Model （ECOM）. The particle model includes the advection and the diffusion processes, of which the advection process is simulated with a certain method, and the diffusion process is simulated with the random walk method. The effect of the intertidal zone, the turbulent diffusion and the timescales of the water exchange are also discussed. The results show that a moving boundary model can simulate the transport process of the particle in the intertidal zone, where the particles are transported for a longer distance than that of the stationary result. Simulations with and without the turbulent random walk show that the effect of turbulent diffusion is very effective at spreading particles throughout the estuary and speeding up the particle movement. The spatial distribution of residence time is given to quantify the water exchange capability that has very important ramifications to water quality. The effect of wind on the water exchange is also examined and the southeasterly wind in summer tends to block the water exchange near the northeast coast, while the northerly wind in winter speeds up the transport process. These results indicate that the Lagrangian particle model is applicable and has a large potential to help understanding the water exchange capability in estuaries, which can also be useful to simulate the transport process of contaminant.

Several characteristics of water exchange in the Luzon Strait

Using the hydrographic data obtained from two sectional observations crossing the Luzon strait in the summer of 1994 and in the winter of 1998, the volume transport through this strait is calculated. It is found that in winter the volume transport (4.45×106 m3/s) is far larger than that in the summer (2.0 ×106 m3/s), respectively being about equal to 15.0% and 6.9% of the Kuroshio.And the paths of water in and out of the section of the strait vary distinctly with the season. In summer, the water flows in and out of the South China Sea (SCS) three times: that is, the inlet passages almost appear on the southern sides of the three deep troughs,the outlet passages are all located on the northern sides of the troughs,and the in-out volume transports through the channel are not lower than 4.0×106 m3/s. The highest velocity (>80 cm/s) and the largest entering water capacity (6.6×106 m3/s) all occur in the Balintang Channel. Except for the north outlet passage in the section, all the higher velocities over 10 cm/s are mainly distributed on the layer above 500 m. In winter,the water flows in and out of the strait two times:the southern sides of the second and third deep troughs are the main passages of the Kuroshio water running into the SCS,while the whole section of the first deep trough and the bottom section of the second deep trough are the outlet passages.The higher velocities over 10 cm/s are almost distributed on the layer above 300 m. Numerical calculation shows that the northern side of the third trough may be the outlet passage.

Role of Kuroshio frontal eddy in exchange between shelf water and Kuroshio water in East China Sea

Basic patterns of the reversal of the Kuroshio water toward the shelf, intrusion of the shelf mixed water into the Kuroshio and uplifting of the near-bottom nutrient-rich water into the upper layer by the pumping of the frontal eddy are analyzed on the basis of satellite infrared images and hydrologic, chemical and biological observations. Results show that the Kuroshio frontal eddies play a very important role in the exchange between the shelf water and the Kuroshio water. The estimation of the average volume transports for three frontal eddy events indicates that the shelf mixed water entrained by an eddy into Kuroshio is 0.44×10~6 m3/s and the reversal Kuroshio water onto the shelf region only 0.04×10~6 m3/s. Along the whole shelf edge, the volume transport of the shelf mixed water entrained by the eddies into the Kuroshio is 1.8×10~6 m3/s. The nutrient (NO3-N) flux pumped to the euphotic zone and input to the continental shelf through a column with 1 m wide is 974 μmol/(s·m) when there is frontal eddy and only 79 μmol/(s·m) in the case of no frontal eddy. Yearly nutrient (NO3-N) flux input to the shelf area caused by the frontal eddy is 1.7×10~5 t/a.

Numerical analysis on water exchange and its response to the coastal engineering in the Yueqing Bay in China

On the basis of a numerical model of tidal current using Delft3D , the distribution of the semi-exchange time of water was simulated in the Yueqing Bay here. The result showed that the semi-exchange time was about more than 6 d in the bay end, and about 1~2 d in the bay mouth. Besides, based on the calculation of the semi-exchange time before and after the Xuanmen Dam project, a comparison between them was further carried out. And the same work was also done with the recent reclamation projects in the Yueqing Bay as well. The results showed that the change in semi-exchange time caused by the Xuanmen Dam project was about 6 d increase near the dam and 4.5 d increase at the bay end. And it was about 5 d increase at the bay end and 1 d increase at the mouth of the bay caused by the recent reclamation projects.

An improved ion-exchange/diffusion method for ～(15)N isotope tracing analysis of nitrate in surface waters from watersheds

An improved method,suitable for collecting nitrate from surface waters in the watershed for 15 N isotope tracing analysis,was developed on the basis of the anion exchange coupled with diffusion through systematic simulation and comparison experiments.The results showed that the nitrate could be separated and enriched from the waters efficiently by using the improved method.Being simple and practical in operation principle and procedures,cost-economic,and highly efficient in nitrate separation/enrichment,the method met the requirements of δ 15 N mass spectrum analysis and would lay a foundation for the application of 15 N isotope tracing approach to the research on non-point source pollution in watershed.

Water Distribution and Removal along the Flow Channel in Proton Exchange Membrane Fuel Cells

Distribution expressions of total gas pressure and partial water vapor pressure along the channel direction were established based on lumped model by analyzing pressure loss in the channel and gas diffusion in the layer. The mechanism of droplet formation in the flow channel was also analyzed. Effects of the relative humidity, working temperature and stoichiometry on liquid water formation were discussed in detail. Moreover, the force equilibrium equation of the droplet in the flow channel was deduced, and the critical flow velocity for the water droplet removal was also addressed. The experimental results show that the threshold position of the liquid droplet is far from the inlet with the increase of temperature, and it decreases with the increase of the inlet total pressure. The critical flow velocity decreases with the increase of the radius and the working pressure.

Evidence to suggest adoption of water exchange deservesbroader consideration:Its pain alleviating impact occurs in90%of investigators

AIM: To determine variations in colonoscopy real-time insertion pain among investigators using three different insertion techniques.METHODS: From March 2013 through June 2014, 18-85-year-old diagnostic and 50-70-year-old screening patients were enrolled at each center to on-demand sedation colonoscopy with water exchange(WE), water immersion(WI) and insufflation with air or CO2 for insertion and withdrawal [air or carbon dioxide(AICD)]. Data were aggregated for analysis. Primary outcome: Variations in real-time maximum insertion pain(0 = none, 1-2 = discomfort, 10 = worst).RESULTS: One thousand and ninety-one cases analyzed: WE(n = 371); WI(n = 338); AICD(n = 382). Demographics and indications were comparable. The WE group had the lowest real-time maximum insertion pain score, mean(95%CI): WE 2.8(2.6-3.0), WI 3.8(3.5-4.1) and AICD 4.4(4.1-4.7), P < 0.0005. Ninety percent of the colonoscopists were able to use water exchange to significantly decrease maximum insertion pain scores. One investigator had high insertion pain in all groups, nonetheless WE achieved the lowest real-time maximum insertion pain score. WE had the highest proportions of patients with painless unsedated colonoscopy(vs WI, P = 0.013; vs AICD, P < 0.0005); unsedated colonoscopy with only minor discomfort(vs AICD, P < 0.0005), and completion without sedation(vs AICD, P < 0.0005).CONCLUSION: Aggregate data confirm superiority of WE in lowering colonoscopy real-time maximum insertion pain and need for sedation. Ninety percent of investigators were able to use water exchange to significantly decrease maximum insertion pain scores. Our results suggest that the technique deserves consideration in a broader scale.

Net water vapour exchange over a mixed needle and broad-leaved forest in Changbai Mountain during autumn

Water vapour and CO2 fluxes were measured by the eddy-covariance technique above a mixed needle and broad-leaved forest with affiliated meteorological measurements in Changbai Mountain as part of China's FLUX projects since late August in 2002. Net water vapour exchange and environmental control over the forest were examined from September 1 to October 31 in 2002. To quantify the seasonal dynamics, the transition period was separated into leafed, leaf falling and leafless stages according to the development of leaf area. The results showed that (a) seasonal variation of water vapour exchange was mainly controlled by net radiation (Rn) which could account for 78.5%, 63.4% and 56.6% for leafed, leaf falling and leafless stages, respectively, while other environmental factors' effects varied evidently; (b) magnitude of water vapour flux decreased remarkably during autumn and daily mean of water vapour exchange was 24.2 mg m-2 s-1 (100%), 14.8 mg m-2 s-1 (61.2%) and 10.3 mg m-2 s-1 (42.6%) for leafed, leaf falling and leafless stage, respectively; and (c) the budget of water vapour exchange during autumn was estimated to be 87.1 kg H2O m-2, with a mean of 1427.2 g H2O d-1' varying markedly from 3104.0 to 227.5 g H2O m-2d-1.

Morphological Characteristics of Cambodia Mekong Delta and Tonle Sap Lake and Its Response to River-Lake Water Exchange Pattern

Tonle Sap Lake is the largest river-connected lake, buffer area and ecological zone of Mekong River, which plays a huge role in dispelling flood peak and compensating water, and the conservation of biological diversity. The river-lake relationship between Mekong River and Tonle Sap Lake is unique and has always been a major focus in the international community. The land terrain and under-water topography were used to analyze the morphological characteristics of Cambodia Mekong Delta and Tonle Sap Lake. Long series of hydrological data of river-lake controlling stations were used to analyze the water level variation characteristics and water volume exchange pattern between Mekong River and Tonle Sap Lake, and the response relationship to river-lake morphological characteristics were also researched. The results show that: Cambodia Mekong Delta and Tonle Sap Lake Area is low-lying and flat with gentle channel gradient and water surface gradient, making the relationship between water level and area (or volume) smooth. The channel storage capacity of Mekong River and Tonle Sap River is not enough compared to the inflow, so vast flooding plain is extremely prone to be inundated, making the flood relationships between the left and right banks become very complicated. Tonle Sap Lake is a seasonal freshwater lake with water flowing in and flowing out, and the timing and intensity of water exchange with Mekong River are closely related to the water flow resistance at the exit section of Tonle Sap Lake and the cross-sectional area of Tonle Sap River, which can be reflected by the river-lake water level difference and the water level of Tonle Sap River. Affected by the river-lake morphological characteristics, the water exchange intensity between Mekong River and Tonle Sap Lake is great. Tonle Sap Lake not only stores 14.4% of flood volume (39.7 billion m3) from the Mekong River every year, but also supplies 29.7% of dry water (69.4 billion m3) to the Mekong River. Influenced by the adjustment of the floodplain, the water level fluctuation of Mekong River and Tonle Sap Lake is slow, and the rising and droop rates of water level are positively correlated with the floodplain storage area. The research results will help to understand the relationship mechanism between Mekong River and Tonle Sap Lake and provide a scientific basis for the comprehensive governance of Cambodia Mekong Delta and Tonle Sap Lake Area.