基于YOLOv5_4layers的PCB小目标缺陷识别方法

针对PCB表面缺陷分辨率低、小目标性以及多样性等问题,提出了一种基于YOLOv5_4layers的PCB小目标缺陷识别方法。该方法在YOLOv5架构的基础上,通过新增采样层的方式添加小目标检测层,优化特征金字塔模型,提升小目标特征提取性能,实现小目标缺陷识别。在调整合适的锚框规格后,改进后的模型在输入640像素×640像素图像时,相较原模型识别精确率提升了7.5%。在输入736像素×736像素图像时,识别精确率提升了1.3%,有效地提升了对PCB小目标缺陷的识别能力,对提高PCB制造过程的质量控制和产品可靠性具有实际意义。

Quantum dynamics within curved thin layers with deviation

Combining the deviation between thin layers' adjacent surfaces with the confining potential method applied to the quantum curved systems,we derive the effective Schr?dinger equation describing the particle constrained within a curved layer,accompanied by a general geometric potential V_(gq) composed of a compression-corrected geometric potential V_(gq)~*and a novel potential V_(gq)~(**) brought by the deviation.Applying this analysis to the cylindrical layer emerges two types of deviation-induced geometric potential,resulting from the the cases of slant deviation and tangent deviation,respectively,which strongly renormalizes the purely geometric potential and contribute to the energy spectrum based on a very substantial deepening of bound states they offer.

Indispensable gutter layers in thin-film composite membranes for carbon capture

Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing.However,the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity,while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers.This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance.We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results.Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed,and the strategies to improve their compatibility with the selective layer are highlighted,such as oxygen plasma treatment,polydopamine deposition,and surface grafting.Finally,we present the opportunities of the gutter layer design for practical applications.

FlowBreakdown of Hybrid Nanofluid on a Rigid Surface with Power Law Fluid as Lubricated Layers

Thiswork investigates an oblique stagnation point flowof hybrid nanofluid over a rigid surface with power lawfluidas lubricated layers. Copper (Cu) and Silver (Ag) solid particles are used as hybrid particles acting in water H2O asa base fluid. The mathematical formulation of flow configuration is presented in terms of differential systemthat isnonlinear in nature. The thermal aspects of the flow field are also investigated by assuming the surface is a heatedsurface with a constant temperature T. Numerical solutions to the governing mathematical model are calculatedby the RK45 algorithm. The results based on the numerical solution against various flow and thermal controllingparameters are presented in terms of line graphs. The specific results depict that the heat flux increases over thelubricated-indexed parameter.

Coated boron layers by boronization and a real-time boron coating using an impurity powder dropper in the LHD

In the Large Helical Device(LHD),diborane(B2H6)is used as a standard boron source for boronization,which is assisted by helium glow discharges.In 2019,a new Impurity Powder Dropper(IPD)system was installed and is under evaluation as a real-time wall conditioning technique.In the LHD,which is a large-sized heliotron device,an additional helium(He)glow discharge cleaning(GDC)after boronization was operated for a reduction in hydrogen recycling from the coated boron layers.This operational time of 3 h was determined by spectroscopic data during glow discharges.A flat hydrogen profile is obtained on the top surface of the coated boron on the specimen exposed to boronization.The results suggest a reduction in hydrogen at the top surface by He-GDC.Trapped oxygen in coated boron was obtained by boronization,and the coated boron,which has boron-oxide,on the first wall by B-IPD was also shown.Considering the difference in coating areas between B2H6 boronization and B-IPD operation,it would be most effective to use the IPD and B2H6 boronization coating together for optimized wall conditioning.

Effect of carbon material and surfactant on ink property and resulting surface cracks of fuel-cell microporous layers

Ensuring the consistency of electrode structure in proton-exchange-membrane fuel cells is highly desired yet challenging because of wide-existing and unguided cracks in the microporous layer(MPL). The first thing is to evaluate the homogeneity of MPL with cracks quantitatively. This paper proposes the homogeneity index of a full-scale MPL with an area of 50 cm~2, which is yet to be reported in the literature to our knowledge. Besides, the effects of the carbon material and surfactant on the ink and resulting MPL structure have been studied. The ink with a high network development degree produces an MPL with low crack density, but the ink with high PDI produces an MPL with low crack homogeneity. The polarity of the surfactant and the non-polarity of polytetrafluoroethylene(PTFE) are not mutually soluble,resulting in the heterogeneous PTFE distribution. The findings of this study provide guidelines for MPL fabrication.

Graphene effectively activating "dead" water molecules between manganese dioxide layers in potassium-ion battery

Aqueous potassium-ion batteries(APIBs),recognized as safe and reliable new energy devices,are considered as one of the alternatives to traditional batteries.Layered MnO_(2),serving as the main cathode,exhibits a lower specific capacity in aqueous electrolytes compared to organic systems and operates through a different reaction mechanism.The application of highly conductive graphene may effectively enhance the capacity of APIBs but could complicate the potassium storage environment.In this study,a MnO_(2) cathode pre-intercalated with K~+ions and grown on graphene(KMO@rGO) was developed using the microwave hydrothermal method for APIBs.KMO@rGO achieved a specific capacity of 90 mA h g^(-1) at a current density of 0.1 A g^(-1),maintaining a capacity retention rate of>90% after 5000 cycles at 5 A g^(-1).In-situ and exsitu characterization techniques revealed the energy-storage mechanism of KMO@rGO:layered MnO_(2)traps a large amount of "dead" water molecules during K~+ions removal.However,the introduction of graphene enables these water molecules to escape during K~+ ions insertion at the cathode.The galvanostatic intermittent titration technique and density functional theory confirmed that KMO@rGO has a higher K~+ions migration rate than MnO_(2).Therefore,the capacity of this cathode depends on the interaction between dead water and K~+ions during the energy-storage reaction.The optimal structural alignment between layered MnO_(2) and graphene allows electrons to easily flow into the external circuit.Rapid charge compensation forces numerous low-solvent K~+ions to displace interlayer dead water,enhancing the capacity.This unique reaction mechanism is unprecedented in other aqueous battery studies.

Boosting the cycling stability of all-solid-state lithium metal batteries through MOF-based polymeric protective layers

Solid-state electrolytes(SSEs)play a pivotal role in advancing next-generation lithium metal battery technology.However,they commonly encounter substantial interfacial resistance and poor stability when interfacing with lithium metal,hindering practical applications.Herein,we introduce a flexible metal-organic framework(MOF:NUS-6)-incorporated polymeric layer,denoted as NP,designed to protect the sodium superionic conductor(NASICON)-type Li_(1.3)Al_(0.3)Ti_(1.7)(PO_(4))_(3)(LATP)electrolyte from Li metal anodes.The NP matrix establishes a soft interface with the LATP surface,effectively reducing voids and gaps that may arise between the LATP electrolyte and Li metal.Moreover,the MOF component in NP enhances ionic conductivity,offers abundant Li^(+)transport sites,and provides hierarchical ion channels,ensuring a homogeneous Li^(+)flow and thus effectively inhibiting Li dendrite formation.Utilizing NP,we fabricate Li symmetrical cells cycled for over 1600 h at 0.2 mA cm^(-2)and all-solid-state LiINP-LATPI LiFePO_(4)batteries,achieving a remarkable 99.3%capacity retention after 200 cycles at 0.2 C.This work outlines a general strategy for designing long-lasting and stable solid-state Li metal batteries.

Engineering hydrophobic protective layers on zinc anodes for enhanced performance in aqueous zinc-ion batteries

Aqueous zinc-ion batteries possess substantial potential for energy storage applications;however,they are hampered by challenges such as dendrite formation and uncontrolled side reactions occurring at the zinc anode.In our investigation,we sought to mitigate these issues through the utilization of in situ zinc complex formation reactions to engineer hydrophobic protective layers on the zinc anode surface.These robust interfacial layers serve as effective barriers,isolating the zinc anode from the electrolyte and active water molecules and thereby preventing hydrogen evolution and the generation of undesirable byproducts.Additionally,the presence of numerous zincophilic sites within these protective layers facilitates uniform zinc deposition while concurrently inhibiting dendrite growth.Through comprehensive evaluation of functional anodes featuring diverse functional groups and alkyl chain lengths,we meticulously scrutinized the underlying mechanisms influencing performance variations.This analysis involved precise modulation of interfacial hydrophobicity,rapid Zn^(2+)ion transport,and ordered deposition of Zn^(2+)ions.Notably,the optimized anode,fabricated with octadecylphosphate(OPA),demonstrated exceptional performance characteristics.The Zn//Zn symmetric cell exhibited remarkable longevity,exceeding 4000 h under a current density of 2 mA cm^(-2)and a capacity density of 2 mA h cm^(-2),Furthermore,when integrated with a VOH cathode,the complete cell exhibited superior capacity retention compared to anodes modified with alternative organic molecules.

Preserving the Ozone Layers: Battling Illegal Trade in Ozone-Depleting Substances

The depletion of the ozone layer, a vital shield protecting the Earth from harmful ultraviolet (UV) radiation, is now a worldwide environmental concern. Human activities, particularly the release of ozone depleting substances (ODS), have led to the thinning of this protective layer over recent decades. Simultaneously, illegal trade has emerged as a global challenge, giving rise to economic issues, losses of tax revenue, heightened criminal activities, health risks, and environmental hazards. The depletion of the ozone layer, a critical shield protecting the Earth from harmful ultraviolet (UV) radiation, has become a global environmental concern. This paper delves into the legal dimensions surrounding ozone-depleting substances (ODS), their impact on the ozone layer, and the subsequent risk of skin cancer. As countries navigate international agreements, domestic regulations, and enforcement mechanisms, the intricate interplay between legal frameworks and the health implications of ozone layer depletion comes to the forefront. The paper highlights particular instances of illegal trade in ozone depleting substances, drawing from data reported by the parties to the Montreal Protocol. Notably, China stands out as a significant source of contraband ODS, with other countries such as Bulgaria, Lithuania, Poland, and France reporting numerous cases. Analyzing these case instances offers insights into the efficacy of legal frameworks and enforcement measures. The paper offers a comprehensive set of recommendations to strengthen global control and enforcement against the illegal trade of ozone depleting substances. These recommendations span diverse aspects such as production monitoring, customs collaboration, mutual verification, cross-border agreements, public-private partnerships, international cooperation, detection equipment, global regulatory standards, resource allocation, public awareness campaigns, alternative substance development, and controlling the trade at its source. By applying these recommendations and enhancing enforcement measures, we aim to protect the ozone layer and create a healthier and safer world for future generations and achieve sustainable development goals.

Dynamic and electrical responses of a curved sandwich beam with glass reinforced laminate layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact

The dynamic responses and generated voltage in a curved sandwich beam with glass reinforced laminate(GRL)layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact(LVI)are investigated.The current study aims to carry out a dynamic analysis on the sandwich beam when the impactor hits the top face sheet with an initial velocity.For the layer analysis,the high-order shear deformation theory(HSDT)and Frostig's second model for the displacement fields of the core layer are used.The classical non-adhesive elastic contact theory and Hunter's principle are used to calculate the dynamic responses in terms of time.In order to validate the analytical method,the outcomes of the current investigation are compared with those gained by the experimental tests carried out by other researchers for a rectangular composite plate subject to the LVI.Finite element(FE)simulations are conducted by means of the ABAQUS software.The effects of the parameters such as foam modulus,layer material,fiber angle,impactor mass,and its velocity on the generated voltage are reviewed.

Fabrication of Graphene/Cu Composite by Chemical Vapor Deposition and Effects of Graphene Layers on Resultant Electrical Conductivity

Graphene(Gr)has unique properties including high electrical conductivity;Thus,graphene/copper(Gr/Cu)composites have attracted increasing attention to replace traditional Cu for electrical applications. However,the problem of how to control graphene to form desired Gr/Cu composite is not well solved. This paper aims at exploring the best parameters for preparing graphene with different layers on Cu foil by chemical vapor deposition(CVD)method and studying the effects of different layers graphene on Gr/Cu composite’s electrical conductivity. Graphene grown on single-sided and double-sided copper was prepared for Gr/Cu and Gr/Cu/Gr composites. The resultant electrical conductivity of Gr/Cu composites increased with decreasing graphene layers and increasing graphene volume fraction. The Gr/Cu/Gr composite with monolayer graphene owns volume fraction of less than 0.002%,producing the best electrical conductivity up to59.8 ×10^(6)S/m,equivalent to 104.5% IACS and 105.3% pure Cu foil.

Strength prediction model for water-bearing sandstone based on nearinfrared spectroscopy

The strength of water-bearing rock cannot be obtained in real time and by nondestructive experiments,which is an issue at cultural relics protection sites such as grotto temples.To solve this problem,we conducted a near-infrared spectrum acquisition experiment in the field and laboratory uniaxial compression strength tests on sandstone that had different water saturation levels.The correlations between the peak height and peak area of the nearinfrared absorption bands of the water-bearing sandstone and uniaxial compressive strength were analyzed.On this basis,a strength prediction model for water-bearing sandstone was established using the long short-term memory full convolutional network(LSTM-FCN)method.Subsequently,a field engineering test was carried out.The results showed that:(1)The sandstone samples had four distinct characteristic absorption peaks at 1400,1900,2200,and 2325 nm.The peak height and peak area of the absorption bands near 1400 nm and 1900 nm had a negative correlation with uniaxial compressive strength.The peak height and peak area of the absorption bands near 2200 nm and 2325 nm had nonlinear positive correlations with uniaxial compressive strength.(2)The LSTM-FCN method was used to establish a strength prediction model for water-bearing sandstone based on near-infrared spectroscopy,and the model achieved an accuracy of up to 97.52%.(3)The prediction model was used to realize non-destructive,quantitative,and real-time determination of uniaxial compressive strength;this represents a new method for the non-destructive testing of grotto rock mass at sites of cultural relics protection.

Design of self-healing PEO-based protective layers containing in-situ grown LDH loaded with inhibitor on the MA8 magnesium alloy

The high corrosion rate of magnesium and its alloys in chloride-containing solution significantly reduces the potential of this material for diverse applications.Therefore,the formation of a smart protective coating was achieved in this work to prevent degradation of the MA8 magnesium alloy.A porous ceramic-like matrix was obtained on the material by plasma electrolytic oxidation(PEO).Further surface functionalization was performed using layered double hydroxides(LDH) served as nanocontainers for the corrosion inhibitor.Several methods of LDH intercalation with benzotriazole(BTA) were proposed.The composition and morphology of the formed coating were studied using SEM-EDX analysis,XRD,XPS,and Raman microspectroscopy.The corrosion behavior of the coated samples was evaluated using electrochemical impedance spectroscopy and potentiodynamic polarization.The corrosion rate was estimated using volumetry and gravimetry methods.The formed composite coating provides the Mg alloy with the lowest corrosion activity(|Z|_(f)=0.1 Hz)=8.48·10^(5) Ω·cm^(2),I_(c)=1.4·10^(-8)A/cm^(2),P_(H)=0.21 mm/year) and improves the protective properties of the PEO-coated sample(|Z|_(f)=0.1 Hz)=8.37·10^(3) Ω·cm^(2),I_(c)=4.1·10^(-7)A/cm^(2),P_(H)=0.31 mm/year).The realization of the self-healing effect of the inhibitor-containing LDH/PEO-coated system was studied using localized electrochemical methods(SVET and SIET) with two artificial defects on the surface.A mechanism involving three stages for the active corrosion protection of the alloy was proposed.These findings contribute to the follow-up work of developing modified LDH/PEO-based structures that promote the Mg alloy with high corrosion resistance,superior electrochemical performance for applications in various fields of industry and medicine.

Mechanical behaviors of deep pillar sandwiched between strong and weak layers

A variety of coal room and pillar mining methods have been efficiently practiced at depths of up to 500 m with least strata mechanics issues.However,for the first time,this method was trialled at depths of 850 e900 m in CSM mine of Czech Republic.The rhomboid-shaped coal pillars with acute corners of 70,surrounded with 5.2 m wide and 3.5e4.5 m high mine roadways,were used.Pillars were developed in a staggered manner with their size variation in the Panel II from 83 m×25 m to 24 m×20 m(corner to corner)and Panel V from 35 m×30 m to 26 m×16 m.Coal seam inclined at 12was affected by the unusual slippery slickenside roof bands and sometimes in the floor levels with high vertical stress below strong and massive sandstone roof.In order to ensure safety,pillars in both the panels were continuously monitored using various geotechnical instruments measuring the induced stresses,side spalling and roof sagging.Both panels suffered high amounts of mining induced stress and pillar failure with side-spalling up to 5 m from all sides.Heavy fracturing of coal pillar sides was controlled by fully encapsulated steel bolts.Mining induced stress kept increasing with the progress of development of pillars and galleries.Instruments installed in the pillar failed to monitor actual induced stress due to fracturing of coal mass around it which created an apprehension of pillar failure up to its core due to high vertical mining induced stress.This risk was reduced by carrying out scientific studies including the three-dimensional numerical models calibrated with data from the instrumented pillar.An attempt has been made to study the behavior of coal pillars and their yielding characteristics at deeper cover based on field and simulation results.

High‑Entropy Layered Oxide Cathode Enabling High‑Rate for Solid‑State Sodium‑Ion Batteries

Na-ion O3-type layered oxides are prospective cathodes for Na-ion batteries due to high energy density and low-cost.Nevertheless,such cathodes usually suffer from phase transitions,sluggish kinetics and air instability,making it difficult to achieve high performance solid-state sodium-ion batteries.Herein,the high-entropy design and Li doping strategy alleviate lattice stress and enhance ionic conductivity,achieving high-rate performance,air stability and electrochemically thermal stability for Na_(0.95)Li_(0.06)Ni_(0.25)Cu_(0.05)Fe_(0.15)Mn_(0.49)O_(2).This cathode delivers a high reversible capacity(141 mAh g^(−1)at 0.2C),excellent rate capability(111 mAh g^(−1)at 8C,85 mAh g^(−1)even at 20C),and long-term stability(over 85%capacity retention after 1000 cycles),which is attributed to a rapid and reversible O3–P3 phase transition in regions of low voltage and suppresses phase transition.Moreover,the compound remains unchanged over seven days and keeps thermal stability until 279℃.Remarkably,the polymer solid-state sodium battery assembled by this cathode provides a capacity of 92 mAh g^(−1)at 5C and keeps retention of 96%after 400 cycles.This strategy inspires more rational designs and could be applied to a series of O3 cathodes to improve the performance of solid-state Na-ion batteries.

Influence of layer thickness on formation quality,microstructure,mechanical properties,and corrosion resistance of WE43 magnesium alloy fabricated by laser powder bed fusion

Laser powder bed fusion(L-PBF)of Mg alloys has provided tremendous opportunities for customized production of aeronautical and medical parts.Layer thickness(LT)is of great significance to the L-PBF process but has not been studied for Mg alloys.In this study,WE43 Mg alloy bulk cubes,porous scaffolds,and thin walls with layer thicknesses of 10,20,30,and 40μm were fabricated.The required laser energy input increased with increasing layer thickness and was different for the bulk cubes and porous scaffolds.Porosity tended to occur at the connection joints in porous scaffolds for LT40 and could be eliminated by reducing the laser energy input.For thin wall parts,a large overhang angle or a small wall thickness resulted in porosity when a large layer thicknesses was used,and the porosity disappeared by reducing the layer thickness or laser energy input.A deeper keyhole penetration was found in all occasions with porosity,explaining the influence of layer thickness,geometrical structure,and laser energy input on the porosity.All the samples achieved a high fusion quality with a relative density of over 99.5%using the optimized laser energy input.The increased layer thickness resulted to more precipitation phases,finer grain sizes and decreased grain texture.With the similar high fusion quality,the tensile strength and elongation of bulk samples were significantly improved from 257 MPa and 1.41%with the 10μm layer to 287 MPa and 15.12%with the 40μm layer,in accordance with the microstructural change.The effect of layer thickness on the compressive properties of porous scaffolds was limited.However,the corrosion rate of bulk samples accelerated with increasing the layer thickness,mainly attributed to the increased number of precipitation phases.

Simulation Study of CuO-Based Solar Cell with Different Buffer Layers Using SCAPS-1D

In copper oxide (CuO) based solar cells, various buffer layers such as CdS, In2S3, WS2 and IGZO have been investigated by solar cell capacitance simulator (SCAPS) in this work. By varying absorber and buffer layer thickness, photovoltaic parameters (open circuit voltage, fill factor, short-circuit current density and efficiency) are determined. The highest efficiency achieved is 19.6% with WS2 buffer layer. The impact of temperature on all CuO-based solar cells is also investigated.

Variation in the permafrost active layer over the Tibetan Plateau during 1980–2020

The active layer,acting as an intermediary of water and heat exchange between permafrost and atmosphere,greatly influences biogeochemical cycles in permafrost areas and is notably sensitive to climate fluctuations.Utilizing the Chinese Meteorological Forcing Dataset to drive the Community Land Model,version 5.0,this study simulates the spatial and temporal characteristics of active layer thickness(ALT)on the Tibetan Plateau(TP)from 1980 to 2020.Results show that the ALT,primarily observed in the central and western parts of the TP where there are insufficient station observations,exhibits significant interdecadal changes after 2000.The average thickness on the TP decreases from 2.54 m during 1980–1999 to 2.28 m during 2000–2020.This change is mainly observed in the western permafrost region,displaying a sharp regional inconsistency compared to the eastern region.A persistent increasing trend of ALT is found in the eastern permafrost region,rather than an interdecadal change.The aforementioned changes in ALT are closely tied to the variations in the surrounding atmospheric environment,particularly air temperature.Additionally,the area of the active layer on the TP displays a profound interdecadal change around 2000,arising from the permafrost thawing and forming.It consistently decreases before 2000 but barely changes after 2000.The regional variation in the permafrost active layer over the TP revealed in this study indicates a complex response of the contemporary climate under global warming.

Significantly Improved High-Temperature Energy Storage Performance of BOPP Films by Coating Nanoscale Inorganic Layer

Biaxially oriented polypropylene(BOPP)is one of the most commonly used commercial capacitor films,but its upper operating temperature is below 105℃due to the sharply increased electrical conduction loss at high temperature.In this study,growing an inorganic nanoscale coating layer onto the BOPP film's surface is proposed to suppress electrical conduction loss at high temperature,as well as increase its upper operating temperature.Four kinds of inorganic coating layers that have different energy band structure and dielectric property are grown onto the both surface of BOPP films,respectively.The effect of inorganic coating layer on the high-temperature energy storage performance has been systematically investigated.The favorable coating layer materials and appropriate thickness enable the BOPP films to have a significant improvement in high-temperature energy storage performance.Specifically,when the aluminum nitride(AIN)acts as a coating layer,the AIN-BOPP-AIN sandwich-structured films possess a discharged energy density of 1.5 J cm^(-3)with an efficiency of 90%at 125℃,accompanying an outstandingly cyclic property.Both the discharged energy density and operation temperature are significantly enhanced,indicating that this efficient and facile method provides an important reference to improve the high-temperature energy storage performance of polymer-based dielectric films.