A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-bu...A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.展开更多
Rice husk powder was used as a carbon source in a high-temperature carbonization reaction for the production of rice husk ash(RHA).Under the catalysis of ferric nitrate,onion-like carbon(OLC)nanomaterial with a partic...Rice husk powder was used as a carbon source in a high-temperature carbonization reaction for the production of rice husk ash(RHA).Under the catalysis of ferric nitrate,onion-like carbon(OLC)nanomaterial with a particle size of approximately 200 nm was successfully prepared and incorporated into waterborne polyurethane(WPU).The tribological properties of the coatings were determined using a controlled-atmosphere tribometer(WMT-2E)under dry-friction conditions.Following the friction test,the friction mechanism was investigated by characterizing the abrasive spot surfaces of the test samples using 3D laser microscopy and scanning electron microscopy/energy dispersive spectrometer.The final results demonstrated that the thermal stability of WPU composite coatings containing various concentrations of OLC nanoparticles was significantly enhanced,binding forces between coatings and steel sheets increased,and hardness improved compared to pure WPU coatings.Tribological tests revealed a notable enhancement in the anti-wear properties of WPU coatings due to the presence of OLC particles.Specifically,the wear rate of the 1.5%OLC/WPU coating was reduced by 45.3%.The coating’s anti-wear mechanism was attributed to the improvement in the mechanical properties of WPU due to OLC,as well as OLC’s participation in the formation of a transfer film under induced friction,which protected the matrix.展开更多
Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub&...Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> was determined by nano-particle size analyzer, and the effects of nano-α-Al<sub>2</sub>O<sub>3</sub> content, ethanol-aqueous solution ratio and KH560 dosage on the dispersion and particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> were investigated. The material structure before and after modification was determined by Fourier transform infrared spectroscopy (FTIR). Aqueous polyurethane resin and inorganic components are combined with modified nano-α-Al<sub>2</sub>O<sub>3</sub> dispersion to form chromium-free passivation solution. The solution is coated on the galvanized sheet, the adhesion and surface hardness are tested, the bonding strength of the coating and the surface hardness of the substrate are discussed. The corrosion resistance and surface morphology of the matrix were investigated by electrochemical test, neutral salt spray test and scanning electron microscope test. The chromium-free passivation film formed after the modification of nano-α-Al<sub>2</sub>O<sub>3</sub> increases the surface hardness of galvanized sheet by about 85%. The corrosion resistance of the film is better than that of a single polyurethane film. The results show that the surface hardness and corrosion resistance of polyurethane resin composite passivation film are significantly improved by the introduction of nano-α-Al<sub>2</sub>O<sub>3</sub>.展开更多
To improve the performance of polyurethane films,small amounts of cellulose nanofibrils(CNF)were physically blended with a waterborne polyurethane(WPU)emulsion,and then CNF/WPU composite films were prepared by cast-co...To improve the performance of polyurethane films,small amounts of cellulose nanofibrils(CNF)were physically blended with a waterborne polyurethane(WPU)emulsion,and then CNF/WPU composite films were prepared by cast-coating and drying.The particle size of the emulsions and the chemical structure,micromorphology,thermal stability,mechanical properties,and water resistance of the composite films were characterized using a Malvern laser particle size analyzer,Fourier transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM),thermogravimetric analysis(TGA),an electronic strength machine,water contact angle analysis(WCA),and water absorption tests,respectively.The results showed that at a low CNF content of 0.3 wt%,the particle size of the WPU emulsion and chemical structure of the film did not change significantly.In addition,the tensile strength of the composite film increased by up to 108%compared to the neat WPU film,and the thermal stability and water resistance were slightly improved.The addition of CNF greatly enhanced the tensile strength while maintaining the other original properties of the WPU film,which may greatly improve the service life and tear resistance of commercial coatings in the future.展开更多
Currently,polymer nanosponges have received extensive attention.However,developing new synthetic techniques for novel nanosponges remains a challenge.Furthermore,to date,composite nanosponge adsorbents based on waterb...Currently,polymer nanosponges have received extensive attention.However,developing new synthetic techniques for novel nanosponges remains a challenge.Furthermore,to date,composite nanosponge adsorbents based on waterborne polyurethane(WPU)andβ-cyclodextrin(β-CD)have not been reported.Herein,a novel green method,ion condensation method,was developed in this study for the preparation of polymer nanosponge adsorbents for efficient removal of dyes from wastewater.Based on the principle of charge repulsion between nanoparticles to maintain emulsion stability,waterborne polyurethane/β-cyclodextrin composite nanosponges(WPU-x,y)were prepared by coagulating the emulsions synthesized from 2,2-dimethylolpropionic acid,polypropylene glycol and hexamethylene diisocyanate as raw materials in a mixture of hydrochloric acid and anhydrous ethanol.The structure and appearance of WPU-x,y were characterized by attenuated total reflectance Fourier transform infrared spectroscopy,thermal gravimetric analyzer,scanning electron microscope and mercury intrusion porosimetry.The adsorption capacity of WPU-x,y was tested by parameters such as cross-linking degree,β-CD dosage,contact time,initial dye concentration and p H value.The study found that WPU-4,4.62 had the best adsorption effect on methylene blue(MB),the maximum removal rate was 93.42%,and the maximum adsorption capacity was 136.03 mg·g^(-1).Moreover,the Sips isotherm and pseudo-second-order-model were suitable for MB adsorption.Therefore,this study provides some perspectives for the fabrication of nanosponge adsorbents.展开更多
In this study,acrylic acid was used as a neutralizer to prepare bio-based WPU with an interpenetrating polymer network structure by thermally induced free radical emulsion polymerization.The effects of the content of ...In this study,acrylic acid was used as a neutralizer to prepare bio-based WPU with an interpenetrating polymer network structure by thermally induced free radical emulsion polymerization.The effects of the content of acrylic acid on the properties of the resulting waterborne polyurethane-poly(acrylic acid)(WPU-PAA)dispersion and the films were systematically investigated.The results showed that the cross-linking density of the interpenetrating network polymers was increased and the interlocking structure of the soft and hard phase dislocations in the molecular segments of the double networks was tailored with increasing the content of acrylic acid,leading to enhancement of the mechanical properties and water resistance of WPU-PAA films.Notably,with the increase in content of acrylic acid,the tensile strength,Young’s modulus,and toughness of the WPU-PAA-110 film increased by 3 times,and 8 times,and 2.4 times compared with WPU-PAA-80,respectively.The WPU-PAA-100 film showed the best water resistance,and the water absorption rate at 96 h was only 3.27%.This work provided a new design scheme for constructing bio-based WPU materials with excellent properties.展开更多
A series of nano silica/silicone modified waterborne polyurethane(WPU) have been synthesized from polytetramethylene glycol and isophorone diisocyanate, dihydroxymethyl propionic acid and triethylamine, ethylenediamin...A series of nano silica/silicone modified waterborne polyurethane(WPU) have been synthesized from polytetramethylene glycol and isophorone diisocyanate, dihydroxymethyl propionic acid and triethylamine, ethylenediamine, trimethylolpropane, nano-SiO2 and the silane coupling agent KH550. The effect of the dosage of nano-SiO2 on the WPU-Si membrane and the coated RDX(cyclotrimethylenetrinitramine) particles have been studied in terms of their surface properties, mechanical properties, and thermal stability. The results showed that with the increase of Si content, the stability of the emulsion reduced gradually. The material with more Si content displayed an increased thermodynamic stability, an increased high temperature resistance, an increased tensile strength and a decreased elongation at break. With the increase of Si content, the surface tension of the material decreased, the bibulous rate reduced, and the contact angle increased gradually, so that the surface tension of the polyurethane and RDX are close to each other which could improve the performance of coating.展开更多
In order to prepare hydrophobic waterborne polyurethane coatings with better performances, the silicon-containing waterborne polyurethane(SiWPU) with functional chain extender hydroxyethyl acrylate(HEA) was prepar...In order to prepare hydrophobic waterborne polyurethane coatings with better performances, the silicon-containing waterborne polyurethane(SiWPU) with functional chain extender hydroxyethyl acrylate(HEA) was prepared first, and then a series of silicon&fluorine-containing polyurethane/acrylate(FSiPUA) emulsions were obtained with flourine containing acrylic monomer by seed emulsion polymerization, introducing micro-nano SiO2 into FSiPUA emulsion to make the final hybrid emulsion. The properties of Si WPU, FSiPUA and SiO2/FSiPUA were investigated by fourier transform infrared spectra(FTIR), transmission electron microscope(TEM), Scanning Electron Microscope(SEM) and some other analytical methods. The results revealed that FSiPUA emulsion particles possessed composite core-shell structure and FSiPUA films with suitable ratio performed better than Si WPU films in hardness, water resistance and solvent resistance. The SiO2/FSiPUA films with micro-nano dual roughness structure showed a water contact angle of 136° with good resistance to acid and alkali.展开更多
Composite polymer electrolytes based on mixing soft-segment waterborne polyurethane (WPU) and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMImTFSI) have been prepared and characterized. The ...Composite polymer electrolytes based on mixing soft-segment waterborne polyurethane (WPU) and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMImTFSI) have been prepared and characterized. The addition of BMImTFSI results in an increase of the ionic conductivity. At high BMImTFSI concentration (BMImTFSI/WPU = 3 in weight ratio), the ionic conductivity reaches 4.27 × 10^-3 S/cm at 30 ℃. These composite polymer electrolytes exhibit good thermal and electrochemical stability, which are high enough to be applied in lithium batteries.展开更多
Cellulose plays a key role in abundant organic natural materials meeting the increasing demand for green and biocompatible products.The highly crystalline nanoscale component of cellulose nanocrystals has recently att...Cellulose plays a key role in abundant organic natural materials meeting the increasing demand for green and biocompatible products.The highly crystalline nanoscale component of cellulose nanocrystals has recently attracted great attention due to the versatile performance as filler or matrix in producing functional materials.In this work,we prepared the waterborne polyurethane via a prepolymer process,and obtained cellulose and cellulose nanocrystals from waste paper via a facile acid hydrolysis process.After that,the cellulose nanocrystals were assembled into film and mixed with polyurethane to prepare flexible polyurethane/cellulose nanocrystals composite membrane with different soaking time.The correlation between the bulk structure and applied properties including thermal resistance and mechanical property was investigated by using Fourier transform infrared spectroscopy(FTIR),X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),scanning electron microscopy(SEM),thermogravimetric analysis(TGA),differential scanning calorimetry(DSC)and folding test.The structure analysis indicates that cellulose nanocrystals prepared from used paper have a quality similar to that of commercial cellulose.Meanwhile,the cellulose nanocrystals have been mixed with polyurethane uniformly.Polyurethane can significantly benefit to the thermal resistance and mechanical property of the cellulose nanocrystals film.The polyurethane/cellulose nanocrystals composite membrane present good flexibility and may hold a significantly potential application as visual and flexible material.展开更多
A two-component waterborne polyurethane(2K-WPU) was prepared by mixing water-soluble acrylic resin and hexamethylene diisocyanate biuret, and then diluted for phase inversion with water. Compared with water-soluble ac...A two-component waterborne polyurethane(2K-WPU) was prepared by mixing water-soluble acrylic resin and hexamethylene diisocyanate biuret, and then diluted for phase inversion with water. Compared with water-soluble acrylic resin, the phase inversion of 2K-WPU occurs at lower water content. It is indicated by TEM that 2K-WPU parti-cles show a core-shell structure, in which HDI biuret is encapsulated by hydrophilic acrylic resin. 2K-WPU emulsion with HDI biuret has larger particle size and narrower distribution index, while for 2K-WPU emulsion with HDI iso-cyanurate, the latex not only has large particle size, but also has two-peak distribution. FTIR shows that the reaction be-tween HDI biuret and acrylic resin can complete in 12h. In addition, studies on effect of composition of acrylic resin on performance of 2K-WPU show that narrowing the polar difference between water-soluble acrylic resin and HDI biuret and improving the miscibility of two components are the key to prepare the transparent and high gloss films with high crosslinking density.展开更多
Castor oil-based cationic waterborne polyurethane(CWPU)was synthesized by pre-polymer process using castor oil(CO),poly(adipic acid-1,4-succinate diol)(PBA),isophorone diisocyanate(IPDI),and N-methyldiethanolamine(MDE...Castor oil-based cationic waterborne polyurethane(CWPU)was synthesized by pre-polymer process using castor oil(CO),poly(adipic acid-1,4-succinate diol)(PBA),isophorone diisocyanate(IPDI),and N-methyldiethanolamine(MDEA).The influences of the content of CO and MDEA on comprehensive performance and finished fabric properties of cationic waterborne polyurethane was investigated,especially the antibacterial properties of finished fabric.The CWPU latex particle size and its distribution decrease as the content of CO increased from 0wt%to 16.8wt%,and increases afterwards.The CWPU films show much higher thermal stability than cationic waterborne polyurethane without CO.The surface of fabrics was characterized by scanning electron microscope(SEM).The finished fabric surface is much smoother.In addition,the finished fabric with CWPU emulsion has better antibacterial property against E.coli and S.aureus.When MDEA content is 8%,the antibacterial rates of the two kinds of bacteria are 77.3%and 82.2%,respectively.展开更多
Waterborne polyurethane(WBPU)with controlled biodegradability and biocompatibility was synthesized by using poly(ε-caprolactone)(PCL)as the polyglycol,isophorone diisocyanate(IPDI)as the isocyanate,2,2-bishydroxymeth...Waterborne polyurethane(WBPU)with controlled biodegradability and biocompatibility was synthesized by using poly(ε-caprolactone)(PCL)as the polyglycol,isophorone diisocyanate(IPDI)as the isocyanate,2,2-bishydroxymethylbutyric acid(DMPA)as the chain extender and 1,4-butanediol(BDO)as the hard-segment regulating agent.We found that BDO content significantlyinfluencedmechanicalproperties,degradable performances and cyto-biocompatibility of PCL-WBPUs.Increasing the BDO content in PCL-WBPU enhanced its tensile strength and decreases strain.Enzymolysis and hydrolysis properties were also regulated by BDO content,but with different mechanisms.Cytobiocompatibility was evaluated with ATDC5 cells.The results show that the biodegradability of PCL-WBPU is significantly determined by BDO content,which exerts a serious influence on its polymer structure,leading to resultant degradable properties.展开更多
The increasing pressure from consumers and policy makers to reduce the use of synthetic polymers,whose production contributes to the depletion of non-renewable resources and are usually non-biodegradable,has prompted ...The increasing pressure from consumers and policy makers to reduce the use of synthetic polymers,whose production contributes to the depletion of non-renewable resources and are usually non-biodegradable,has prompted the efforts to find suitable bio-based sources for the production of polymers.Vegetable oils have been a frequently spotted in this search because they are versatile,highly available and a low cost liquid biosource,which can be used in the synthesis of a wide plethora of different polymers and reactive monomers.Following the same idea of reducing the environmental stress,the traditional polyurethanes that are soluble in organic solvents have been targeted for replacement,particularly in applications such as adhesives and coatings,in which the solvent is released to the atmosphere increasing the air pollution.Instead,waterborne polyurethanes(WBPU),which are polyurethane dispersions(PUD)prepared in aqueous media,release benign water to the atmosphere during use as supported or self-standing films for different applications.In this brief review,the contributions to the development of WBPUs based on vegetable oils are discussed,focusing mainly on the contributions of the last decade.The synthesis of ionic and nonionic PUDs,their characterization and the properties of the resulting dried materials,as well as derived composite materials are considered.展开更多
Incorporation of photochromic compounds to the polymer through chemical bonding will result in an enhancement of photoactivity and stabilization of optical properties.Here,spiropyran(SP)was introduced into polyurethan...Incorporation of photochromic compounds to the polymer through chemical bonding will result in an enhancement of photoactivity and stabilization of optical properties.Here,spiropyran(SP)was introduced into polyurethane(PU)through semi-continuous emulsion copolymerization to get waterborne polyurethane dispersion(SPU).Studies on photochromic properties by UV-vis technique demonstrated the absorption intensity increased with the increasing of SP concentration and the colorless film turned to purple under UV irradiation.The kinetics for ring-opening and ring-closing reaction against SP were both first order,but the rate constants decreased with the increasing of SP concentration.The prepared SPU films showed reasonable photostability and photoreversibility according to the convenient test methods under UV-vis irradiation.Temperature dependence studies demonstrated that the photobleaching rate increased at higher temperatures with the same SP concentration.The chemical combination between SP and isocyanate(NCO)end group of polyurethane was confirmed through swelling experiments.Morphology studies were conducted by scanning electron microscope(SEM)micrographs and showed good compatibility between SP and PU.展开更多
Wool keratin(WK)and silk sericin(SS)have the ability to interact with metal ions.In order to take advantage of this potential,a novel environmentally friendly waterborne polyurethane(WPU)/WK/SS membrane named as WPU&a...Wool keratin(WK)and silk sericin(SS)have the ability to interact with metal ions.In order to take advantage of this potential,a novel environmentally friendly waterborne polyurethane(WPU)/WK/SS membrane named as WPU&WK&SS membrane with crosslinked structure was constructed by freeze-drying via self-assembly style.Surface morphology and chemical structure characterization were investigated by scanning electron microscopy(SEM)and Fourier transform infrared spectroscopy(FT-IR).In addition,the adsorption experiments of Cu2+and Cr6+were performed to evaluate the adsorption of WPU&WK&SS membrane,including adsorption kinetics,adsorption isotherm models and various factors affecting adsorption.Further investigation indicates that the maximum adsorption capacity of Cu2+and Cr6+can reach 54.21 mg·g-1and 85.21 mg·g-1,respectively,which are higher than most of the reported adsorbents.Through adsorption kinetics and thermodynamic analysis,it is find that the pseudo-second-order kinetic equation and the Langmuir adsorption isotherm model are more suitable for the static adsorption of Cu2+and Cr6+by WPU&WK&SS membrane.展开更多
The main purpose of this research work is to improve anti-static properties of Cashmere fabric by introducing application comprising anti-static agent by foaming which was made with cationic waterborne polyurethane an...The main purpose of this research work is to improve anti-static properties of Cashmere fabric by introducing application comprising anti-static agent by foaming which was made with cationic waterborne polyurethane and graphene-CNC. Cashmere fabric was cut into 10 pieces of sample cloth of 5 cm * 5 cm size, washed with acetone solution, and then dried in an oven at 60℃. Three forms of waterborne polyurethanes such as two forms of Cationic waterborne polyurethane (CWPU) and a form of Anionic waterborne polyurethane (AWPU) were synthesized. Cellulose nanocrystalline (CNC)/graphite powder solution with the ratio of 0.5/1, 1/1, 2/1 was prepared by ultrasonic probe stripping method, and the concentration of graphite powder was ensured to be 1 mg/ml. The fabric was treated with anionic and cationic WPUs foaming solution until the weight gain reached 2.5 - 3.5 wt%. After drying, the elastic cloth was foamed with graphene solution until the graphite content of the cloth was close to 10%, 20%, 40%, 60% respectively, and then dried for reserving. Characterization properties of pure graphite powder, pure CNC and graphene solution with different proportions of three components were tested by Fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), Thermalgravitimetric analysis (TGA) and scanning electron microscopy (SEM). Take the original cloth, only WPU treated cloth and four clothes with different graphite content for the fabric performance test.展开更多
Environmentally friendly, polyacrylic-based polyurethane dispersion (PUD) was synthesised using various molar ratios of polycaprolactone, dimethylolpropionic acid and tetramethyl xylene diisocyanate. Synthesis was car...Environmentally friendly, polyacrylic-based polyurethane dispersion (PUD) was synthesised using various molar ratios of polycaprolactone, dimethylolpropionic acid and tetramethyl xylene diisocyanate. Synthesis was carried out in flowing nitrogen atmosphere. The PUD’s preparations are free of NMP (n-methyl pyrrolidone), a toxic processing solvent generally used during the preparation of PUD’s. The performance of the synthesised polyurethane dispersions with varying NCO/OH molar ratio was tested on wood surface. The physical, chemical, thermal and mechanical properties such as viscosity, particle size, chemical resistance, thermal stability and taber abrasion of applied polyurethane dispersion were carried out as a function of NCO/OH molar ratio. The PUD’s preparation with NCO/OH ratio of 1.4 or 1.6 showed better performance as a wood finish and the results are described in the present study.展开更多
Polyurethane dispersions (PUD) have diversified into a myriad of applications over the years. This has led to extensive research on both industrial and laboratory fronts as polyurethane dispersions provide liberty to ...Polyurethane dispersions (PUD) have diversified into a myriad of applications over the years. This has led to extensive research on both industrial and laboratory fronts as polyurethane dispersions provide liberty to interplay at the molecular level to diversify the properties of the product which has also led to the development of eco-friendly waterborne dispersions. Yet, waterborne PUDs are limited in their mechanical and physical properties as compared to solvent-based products. The incorporation of crosslinkers in the PUD further bolsters these properties thus improving water and solvent resistance. The incorporation of silanols increases solvent resistance and adhesion of the resultant PUD. In this work, a post crosslinking system based on the ketone-hydrazine mechanism was incorporated into the PUD thus providing the required structural reinforcement for construction application. The targeted application for this work is the use of PUDs for waterproofing.展开更多
文摘A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.
基金the National Natural Science Foundation of China(52075144)the Anhui Province Natural Science Foundation of China(2008085ME167)+3 种基金the Anhui University Outstanding Young Talents Programs(gxyqZD2020051)is gratefully acknowledged.The Talent Research Fund of Hefei University(21-22RC33)the Open Project of Anhui Province Engineering Laboratory of Intelligent Demolition Equipment(APELIDE2021B003)the Open Project of Anhui Province Key Laboratory of Critical Friction Pair for Advanced Equipment(LCFP-2404)the Excellent Scientific Research and Innovation Team of Anhui University(2022AH010096)are also gratefully acknowledged.
文摘Rice husk powder was used as a carbon source in a high-temperature carbonization reaction for the production of rice husk ash(RHA).Under the catalysis of ferric nitrate,onion-like carbon(OLC)nanomaterial with a particle size of approximately 200 nm was successfully prepared and incorporated into waterborne polyurethane(WPU).The tribological properties of the coatings were determined using a controlled-atmosphere tribometer(WMT-2E)under dry-friction conditions.Following the friction test,the friction mechanism was investigated by characterizing the abrasive spot surfaces of the test samples using 3D laser microscopy and scanning electron microscopy/energy dispersive spectrometer.The final results demonstrated that the thermal stability of WPU composite coatings containing various concentrations of OLC nanoparticles was significantly enhanced,binding forces between coatings and steel sheets increased,and hardness improved compared to pure WPU coatings.Tribological tests revealed a notable enhancement in the anti-wear properties of WPU coatings due to the presence of OLC particles.Specifically,the wear rate of the 1.5%OLC/WPU coating was reduced by 45.3%.The coating’s anti-wear mechanism was attributed to the improvement in the mechanical properties of WPU due to OLC,as well as OLC’s participation in the formation of a transfer film under induced friction,which protected the matrix.
文摘Silane coupling agent KH560 was used to modify the surface of nano-α-Al<sub>2</sub>O<sub>3</sub> in ethanol-aqueous solution with different proportions. The particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> was determined by nano-particle size analyzer, and the effects of nano-α-Al<sub>2</sub>O<sub>3</sub> content, ethanol-aqueous solution ratio and KH560 dosage on the dispersion and particle size of nano-α-Al<sub>2</sub>O<sub>3</sub> were investigated. The material structure before and after modification was determined by Fourier transform infrared spectroscopy (FTIR). Aqueous polyurethane resin and inorganic components are combined with modified nano-α-Al<sub>2</sub>O<sub>3</sub> dispersion to form chromium-free passivation solution. The solution is coated on the galvanized sheet, the adhesion and surface hardness are tested, the bonding strength of the coating and the surface hardness of the substrate are discussed. The corrosion resistance and surface morphology of the matrix were investigated by electrochemical test, neutral salt spray test and scanning electron microscope test. The chromium-free passivation film formed after the modification of nano-α-Al<sub>2</sub>O<sub>3</sub> increases the surface hardness of galvanized sheet by about 85%. The corrosion resistance of the film is better than that of a single polyurethane film. The results show that the surface hardness and corrosion resistance of polyurethane resin composite passivation film are significantly improved by the introduction of nano-α-Al<sub>2</sub>O<sub>3</sub>.
文摘To improve the performance of polyurethane films,small amounts of cellulose nanofibrils(CNF)were physically blended with a waterborne polyurethane(WPU)emulsion,and then CNF/WPU composite films were prepared by cast-coating and drying.The particle size of the emulsions and the chemical structure,micromorphology,thermal stability,mechanical properties,and water resistance of the composite films were characterized using a Malvern laser particle size analyzer,Fourier transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM),thermogravimetric analysis(TGA),an electronic strength machine,water contact angle analysis(WCA),and water absorption tests,respectively.The results showed that at a low CNF content of 0.3 wt%,the particle size of the WPU emulsion and chemical structure of the film did not change significantly.In addition,the tensile strength of the composite film increased by up to 108%compared to the neat WPU film,and the thermal stability and water resistance were slightly improved.The addition of CNF greatly enhanced the tensile strength while maintaining the other original properties of the WPU film,which may greatly improve the service life and tear resistance of commercial coatings in the future.
基金supported by the National Natural Science Foundation of China(21704047,21801145)the Natural Science Foundation of Shandong Province(ZR2017BB078,ZR2021QE137)+1 种基金the Foundation(ZZ20190407)of State Key Laboratory of Biobased Material and Green Papermakingthe Major Scientific and Technological Innovation Projects of Shandong Province(2019JZZY020230)。
文摘Currently,polymer nanosponges have received extensive attention.However,developing new synthetic techniques for novel nanosponges remains a challenge.Furthermore,to date,composite nanosponge adsorbents based on waterborne polyurethane(WPU)andβ-cyclodextrin(β-CD)have not been reported.Herein,a novel green method,ion condensation method,was developed in this study for the preparation of polymer nanosponge adsorbents for efficient removal of dyes from wastewater.Based on the principle of charge repulsion between nanoparticles to maintain emulsion stability,waterborne polyurethane/β-cyclodextrin composite nanosponges(WPU-x,y)were prepared by coagulating the emulsions synthesized from 2,2-dimethylolpropionic acid,polypropylene glycol and hexamethylene diisocyanate as raw materials in a mixture of hydrochloric acid and anhydrous ethanol.The structure and appearance of WPU-x,y were characterized by attenuated total reflectance Fourier transform infrared spectroscopy,thermal gravimetric analyzer,scanning electron microscope and mercury intrusion porosimetry.The adsorption capacity of WPU-x,y was tested by parameters such as cross-linking degree,β-CD dosage,contact time,initial dye concentration and p H value.The study found that WPU-4,4.62 had the best adsorption effect on methylene blue(MB),the maximum removal rate was 93.42%,and the maximum adsorption capacity was 136.03 mg·g^(-1).Moreover,the Sips isotherm and pseudo-second-order-model were suitable for MB adsorption.Therefore,this study provides some perspectives for the fabrication of nanosponge adsorbents.
基金by the Research and Development Program in Key Areas of Guangdong Province(Grant No.2020B0202010008)Guangdong Province Science&Technology Program(2018B030306016)+1 种基金Guangdong Provincial Innovation Team for General Key Technologies in Modern Agricultural Industry(2019KJ133)Key Projects of Basic Research and Applied Basic Research of the Higher Education Institutions of Guangdong Province(2018KZDXM014).
文摘In this study,acrylic acid was used as a neutralizer to prepare bio-based WPU with an interpenetrating polymer network structure by thermally induced free radical emulsion polymerization.The effects of the content of acrylic acid on the properties of the resulting waterborne polyurethane-poly(acrylic acid)(WPU-PAA)dispersion and the films were systematically investigated.The results showed that the cross-linking density of the interpenetrating network polymers was increased and the interlocking structure of the soft and hard phase dislocations in the molecular segments of the double networks was tailored with increasing the content of acrylic acid,leading to enhancement of the mechanical properties and water resistance of WPU-PAA films.Notably,with the increase in content of acrylic acid,the tensile strength,Young’s modulus,and toughness of the WPU-PAA-110 film increased by 3 times,and 8 times,and 2.4 times compared with WPU-PAA-80,respectively.The WPU-PAA-100 film showed the best water resistance,and the water absorption rate at 96 h was only 3.27%.This work provided a new design scheme for constructing bio-based WPU materials with excellent properties.
基金the financial support by the National Natural Science Foundation of China(No.20973022 and No.11472048)
文摘A series of nano silica/silicone modified waterborne polyurethane(WPU) have been synthesized from polytetramethylene glycol and isophorone diisocyanate, dihydroxymethyl propionic acid and triethylamine, ethylenediamine, trimethylolpropane, nano-SiO2 and the silane coupling agent KH550. The effect of the dosage of nano-SiO2 on the WPU-Si membrane and the coated RDX(cyclotrimethylenetrinitramine) particles have been studied in terms of their surface properties, mechanical properties, and thermal stability. The results showed that with the increase of Si content, the stability of the emulsion reduced gradually. The material with more Si content displayed an increased thermodynamic stability, an increased high temperature resistance, an increased tensile strength and a decreased elongation at break. With the increase of Si content, the surface tension of the material decreased, the bibulous rate reduced, and the contact angle increased gradually, so that the surface tension of the polyurethane and RDX are close to each other which could improve the performance of coating.
基金Funded by the National High Technology Research and Development Program("863"Program)(No.2003AA305071)
文摘In order to prepare hydrophobic waterborne polyurethane coatings with better performances, the silicon-containing waterborne polyurethane(SiWPU) with functional chain extender hydroxyethyl acrylate(HEA) was prepared first, and then a series of silicon&fluorine-containing polyurethane/acrylate(FSiPUA) emulsions were obtained with flourine containing acrylic monomer by seed emulsion polymerization, introducing micro-nano SiO2 into FSiPUA emulsion to make the final hybrid emulsion. The properties of Si WPU, FSiPUA and SiO2/FSiPUA were investigated by fourier transform infrared spectra(FTIR), transmission electron microscope(TEM), Scanning Electron Microscope(SEM) and some other analytical methods. The results revealed that FSiPUA emulsion particles possessed composite core-shell structure and FSiPUA films with suitable ratio performed better than Si WPU films in hardness, water resistance and solvent resistance. The SiO2/FSiPUA films with micro-nano dual roughness structure showed a water contact angle of 136° with good resistance to acid and alkali.
基金financially supported by the National 863 Program(No.2007AA03Z226)the National Key Program for Basic Research of China(No.2002CB211800 and 2009CB220100).
文摘Composite polymer electrolytes based on mixing soft-segment waterborne polyurethane (WPU) and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMImTFSI) have been prepared and characterized. The addition of BMImTFSI results in an increase of the ionic conductivity. At high BMImTFSI concentration (BMImTFSI/WPU = 3 in weight ratio), the ionic conductivity reaches 4.27 × 10^-3 S/cm at 30 ℃. These composite polymer electrolytes exhibit good thermal and electrochemical stability, which are high enough to be applied in lithium batteries.
基金support provided by the National Natural Science Foundation of China[Grant No.51802259]China Postdoctoral Science Foundation Funded Project[Grant No.2019M663785]+4 种基金the Natural Science Foundation of Shaanxi[Grant No.2019JQ-510]the Natural Science Basic Research Plan in Shaanxi Province of China[Grant No.2018JM5053],Xi’an and Xi’an Beilin District Programs for Science and Technology Plan[Grant No.201805037YD15CG21(18)and GX1913]the Promotion Program for Youth of Shaanxi University science and technology association[Grant No.20190415]Fund of Key laboratory of Processing and Quality Evaluation Technology of Green Plastics of China National Light Industry council[Grant No.PQETGP2019003]the Ph.D.Start-up fund project[Grant No.108-451118001]of Xi’an University of Technology.
文摘Cellulose plays a key role in abundant organic natural materials meeting the increasing demand for green and biocompatible products.The highly crystalline nanoscale component of cellulose nanocrystals has recently attracted great attention due to the versatile performance as filler or matrix in producing functional materials.In this work,we prepared the waterborne polyurethane via a prepolymer process,and obtained cellulose and cellulose nanocrystals from waste paper via a facile acid hydrolysis process.After that,the cellulose nanocrystals were assembled into film and mixed with polyurethane to prepare flexible polyurethane/cellulose nanocrystals composite membrane with different soaking time.The correlation between the bulk structure and applied properties including thermal resistance and mechanical property was investigated by using Fourier transform infrared spectroscopy(FTIR),X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),scanning electron microscopy(SEM),thermogravimetric analysis(TGA),differential scanning calorimetry(DSC)and folding test.The structure analysis indicates that cellulose nanocrystals prepared from used paper have a quality similar to that of commercial cellulose.Meanwhile,the cellulose nanocrystals have been mixed with polyurethane uniformly.Polyurethane can significantly benefit to the thermal resistance and mechanical property of the cellulose nanocrystals film.The polyurethane/cellulose nanocrystals composite membrane present good flexibility and may hold a significantly potential application as visual and flexible material.
文摘A two-component waterborne polyurethane(2K-WPU) was prepared by mixing water-soluble acrylic resin and hexamethylene diisocyanate biuret, and then diluted for phase inversion with water. Compared with water-soluble acrylic resin, the phase inversion of 2K-WPU occurs at lower water content. It is indicated by TEM that 2K-WPU parti-cles show a core-shell structure, in which HDI biuret is encapsulated by hydrophilic acrylic resin. 2K-WPU emulsion with HDI biuret has larger particle size and narrower distribution index, while for 2K-WPU emulsion with HDI iso-cyanurate, the latex not only has large particle size, but also has two-peak distribution. FTIR shows that the reaction be-tween HDI biuret and acrylic resin can complete in 12h. In addition, studies on effect of composition of acrylic resin on performance of 2K-WPU show that narrowing the polar difference between water-soluble acrylic resin and HDI biuret and improving the miscibility of two components are the key to prepare the transparent and high gloss films with high crosslinking density.
文摘Castor oil-based cationic waterborne polyurethane(CWPU)was synthesized by pre-polymer process using castor oil(CO),poly(adipic acid-1,4-succinate diol)(PBA),isophorone diisocyanate(IPDI),and N-methyldiethanolamine(MDEA).The influences of the content of CO and MDEA on comprehensive performance and finished fabric properties of cationic waterborne polyurethane was investigated,especially the antibacterial properties of finished fabric.The CWPU latex particle size and its distribution decrease as the content of CO increased from 0wt%to 16.8wt%,and increases afterwards.The CWPU films show much higher thermal stability than cationic waterborne polyurethane without CO.The surface of fabrics was characterized by scanning electron microscope(SEM).The finished fabric surface is much smoother.In addition,the finished fabric with CWPU emulsion has better antibacterial property against E.coli and S.aureus.When MDEA content is 8%,the antibacterial rates of the two kinds of bacteria are 77.3%and 82.2%,respectively.
基金National Natural Science Foundation of China(No.51173144)International Science&Technology Cooperation Program Supported by Ministry of Science and Technology of China and Shaanxi Province,China(No.2013KW14-02)+3 种基金Program for the Key Science and Technology Innovative Team of Shaanxi Province,China(No.2013KCT-05)China Postdoctoral Science Foundation(No.2014M562405)Natural Science Foundation of Shaanxi Province,China(No.2015JQ5137)Collaborative Innovation Center of Suzhou Nano Science and Technology,Suzhou Research Institute,China(No.BY2013036)
文摘Waterborne polyurethane(WBPU)with controlled biodegradability and biocompatibility was synthesized by using poly(ε-caprolactone)(PCL)as the polyglycol,isophorone diisocyanate(IPDI)as the isocyanate,2,2-bishydroxymethylbutyric acid(DMPA)as the chain extender and 1,4-butanediol(BDO)as the hard-segment regulating agent.We found that BDO content significantlyinfluencedmechanicalproperties,degradable performances and cyto-biocompatibility of PCL-WBPUs.Increasing the BDO content in PCL-WBPU enhanced its tensile strength and decreases strain.Enzymolysis and hydrolysis properties were also regulated by BDO content,but with different mechanisms.Cytobiocompatibility was evaluated with ATDC5 cells.The results show that the biodegradability of PCL-WBPU is significantly determined by BDO content,which exerts a serious influence on its polymer structure,leading to resultant degradable properties.
基金the Consejo Nacional de Investigaciones Científicas y Técnicas(CONICET,Argentina)(PIP 20170100677)the Fondo para la Investigación Científica y Tecnológica(FONCYT)(PICT-2017-1318)the Universidad Nacional de Mar del Plata(UNMdP,15/G557,ING561/19)and to the Comisión de Investigaciones Científicas de la Provincia de Buenos Aires(CIC)and the Universidad Tecnológica Nacional(UTN)for their financial support.
文摘The increasing pressure from consumers and policy makers to reduce the use of synthetic polymers,whose production contributes to the depletion of non-renewable resources and are usually non-biodegradable,has prompted the efforts to find suitable bio-based sources for the production of polymers.Vegetable oils have been a frequently spotted in this search because they are versatile,highly available and a low cost liquid biosource,which can be used in the synthesis of a wide plethora of different polymers and reactive monomers.Following the same idea of reducing the environmental stress,the traditional polyurethanes that are soluble in organic solvents have been targeted for replacement,particularly in applications such as adhesives and coatings,in which the solvent is released to the atmosphere increasing the air pollution.Instead,waterborne polyurethanes(WBPU),which are polyurethane dispersions(PUD)prepared in aqueous media,release benign water to the atmosphere during use as supported or self-standing films for different applications.In this brief review,the contributions to the development of WBPUs based on vegetable oils are discussed,focusing mainly on the contributions of the last decade.The synthesis of ionic and nonionic PUDs,their characterization and the properties of the resulting dried materials,as well as derived composite materials are considered.
基金Construction of High-Level Teachers of Beijing Institute of Fashion Technology,China(No.BIFT201808)。
文摘Incorporation of photochromic compounds to the polymer through chemical bonding will result in an enhancement of photoactivity and stabilization of optical properties.Here,spiropyran(SP)was introduced into polyurethane(PU)through semi-continuous emulsion copolymerization to get waterborne polyurethane dispersion(SPU).Studies on photochromic properties by UV-vis technique demonstrated the absorption intensity increased with the increasing of SP concentration and the colorless film turned to purple under UV irradiation.The kinetics for ring-opening and ring-closing reaction against SP were both first order,but the rate constants decreased with the increasing of SP concentration.The prepared SPU films showed reasonable photostability and photoreversibility according to the convenient test methods under UV-vis irradiation.Temperature dependence studies demonstrated that the photobleaching rate increased at higher temperatures with the same SP concentration.The chemical combination between SP and isocyanate(NCO)end group of polyurethane was confirmed through swelling experiments.Morphology studies were conducted by scanning electron microscope(SEM)micrographs and showed good compatibility between SP and PU.
基金National Key Research and Development of China(No.2016YFC0802802)。
文摘Wool keratin(WK)and silk sericin(SS)have the ability to interact with metal ions.In order to take advantage of this potential,a novel environmentally friendly waterborne polyurethane(WPU)/WK/SS membrane named as WPU&WK&SS membrane with crosslinked structure was constructed by freeze-drying via self-assembly style.Surface morphology and chemical structure characterization were investigated by scanning electron microscopy(SEM)and Fourier transform infrared spectroscopy(FT-IR).In addition,the adsorption experiments of Cu2+and Cr6+were performed to evaluate the adsorption of WPU&WK&SS membrane,including adsorption kinetics,adsorption isotherm models and various factors affecting adsorption.Further investigation indicates that the maximum adsorption capacity of Cu2+and Cr6+can reach 54.21 mg·g-1and 85.21 mg·g-1,respectively,which are higher than most of the reported adsorbents.Through adsorption kinetics and thermodynamic analysis,it is find that the pseudo-second-order kinetic equation and the Langmuir adsorption isotherm model are more suitable for the static adsorption of Cu2+and Cr6+by WPU&WK&SS membrane.
文摘The main purpose of this research work is to improve anti-static properties of Cashmere fabric by introducing application comprising anti-static agent by foaming which was made with cationic waterborne polyurethane and graphene-CNC. Cashmere fabric was cut into 10 pieces of sample cloth of 5 cm * 5 cm size, washed with acetone solution, and then dried in an oven at 60℃. Three forms of waterborne polyurethanes such as two forms of Cationic waterborne polyurethane (CWPU) and a form of Anionic waterborne polyurethane (AWPU) were synthesized. Cellulose nanocrystalline (CNC)/graphite powder solution with the ratio of 0.5/1, 1/1, 2/1 was prepared by ultrasonic probe stripping method, and the concentration of graphite powder was ensured to be 1 mg/ml. The fabric was treated with anionic and cationic WPUs foaming solution until the weight gain reached 2.5 - 3.5 wt%. After drying, the elastic cloth was foamed with graphene solution until the graphite content of the cloth was close to 10%, 20%, 40%, 60% respectively, and then dried for reserving. Characterization properties of pure graphite powder, pure CNC and graphene solution with different proportions of three components were tested by Fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), Thermalgravitimetric analysis (TGA) and scanning electron microscopy (SEM). Take the original cloth, only WPU treated cloth and four clothes with different graphite content for the fabric performance test.
文摘Environmentally friendly, polyacrylic-based polyurethane dispersion (PUD) was synthesised using various molar ratios of polycaprolactone, dimethylolpropionic acid and tetramethyl xylene diisocyanate. Synthesis was carried out in flowing nitrogen atmosphere. The PUD’s preparations are free of NMP (n-methyl pyrrolidone), a toxic processing solvent generally used during the preparation of PUD’s. The performance of the synthesised polyurethane dispersions with varying NCO/OH molar ratio was tested on wood surface. The physical, chemical, thermal and mechanical properties such as viscosity, particle size, chemical resistance, thermal stability and taber abrasion of applied polyurethane dispersion were carried out as a function of NCO/OH molar ratio. The PUD’s preparation with NCO/OH ratio of 1.4 or 1.6 showed better performance as a wood finish and the results are described in the present study.
文摘Polyurethane dispersions (PUD) have diversified into a myriad of applications over the years. This has led to extensive research on both industrial and laboratory fronts as polyurethane dispersions provide liberty to interplay at the molecular level to diversify the properties of the product which has also led to the development of eco-friendly waterborne dispersions. Yet, waterborne PUDs are limited in their mechanical and physical properties as compared to solvent-based products. The incorporation of crosslinkers in the PUD further bolsters these properties thus improving water and solvent resistance. The incorporation of silanols increases solvent resistance and adhesion of the resultant PUD. In this work, a post crosslinking system based on the ketone-hydrazine mechanism was incorporated into the PUD thus providing the required structural reinforcement for construction application. The targeted application for this work is the use of PUDs for waterproofing.