An experimental study was conducted on shock wave turbulent boundary layer interactions caused by a blunt swept fin-plate configuration at Mach numbers of 5.0, 7.8, 9.9 for a Reynolds number range of (1.0.similar to 4...An experimental study was conducted on shock wave turbulent boundary layer interactions caused by a blunt swept fin-plate configuration at Mach numbers of 5.0, 7.8, 9.9 for a Reynolds number range of (1.0.similar to 4.7) x 10(7)/m. Detailed heat transfer and pressure distributions were measured at fin deflection angles of up to 30 degrees for a sweepback angle of 67.6 degrees. Surface oil flow patterns and liquid crystal thermograms as well as schlieren pictures of fin shock shape were taken. The study shows that the flow was separated at deflection of 10 degrees and secondary separation were detected at deflection of theta greater than or equal to 20 degrees. The heat transfer and pressure distributions on flat plate showed an extensive plateau region followed by a distinct dip and local peak close to the fin foot. Measurements of the plateau pressure and heat transfer were in good agreement with existing prediction methods, but pressure and heating peak measurements at M greater than or equal to 6 were significantly lower than predicted by the simple prediction techniques at lower Mach numbers.展开更多
In the case of Autonomous Underwater Vehicle （AUV） navigating with low speed near water surface, a new method for design of roll motion controller is proposed in order to restrain wave disturbance effectively and im...In the case of Autonomous Underwater Vehicle （AUV） navigating with low speed near water surface, a new method for design of roll motion controller is proposed in order to restrain wave disturbance effectively and improve roll stabilizing performance. Robust control is applied, which is based on uncertain nonlinear horizontal motion model of AUV and the principle of zero speed fin stabilizer. Feedback linearization approach is used to transform the complex nonlinear system into a comparatively simple linear system. For parameter uncertainty of motion model, the controller is designed with mixed-sensitivity method based on H-infinity robust control theory. Simulation results show better robustness improved by this control method for roll stabilizing of AUV navigating near water surface.展开更多
In this paper we show thc method of energy in part with which we can get the model of random wave,and predict theroll motion of unstabilized ship and stabilized ship using the wave model.The control parameters of fin ...In this paper we show thc method of energy in part with which we can get the model of random wave,and predict theroll motion of unstabilized ship and stabilized ship using the wave model.The control parameters of fin stabilizer are determinedaccording to the performance index. The simulation of the system is also made in this paper. The comparison of the simulationwith real ship indicates that the method can be used in the prediction of roll motion of a stabilized ship in random wave.展开更多
基金The project supported by China Academy of Launch Vehicle Technology
文摘An experimental study was conducted on shock wave turbulent boundary layer interactions caused by a blunt swept fin-plate configuration at Mach numbers of 5.0, 7.8, 9.9 for a Reynolds number range of (1.0.similar to 4.7) x 10(7)/m. Detailed heat transfer and pressure distributions were measured at fin deflection angles of up to 30 degrees for a sweepback angle of 67.6 degrees. Surface oil flow patterns and liquid crystal thermograms as well as schlieren pictures of fin shock shape were taken. The study shows that the flow was separated at deflection of 10 degrees and secondary separation were detected at deflection of theta greater than or equal to 20 degrees. The heat transfer and pressure distributions on flat plate showed an extensive plateau region followed by a distinct dip and local peak close to the fin foot. Measurements of the plateau pressure and heat transfer were in good agreement with existing prediction methods, but pressure and heating peak measurements at M greater than or equal to 6 were significantly lower than predicted by the simple prediction techniques at lower Mach numbers.
基金supported by the National Natural Science Foundation of China (Grant No. 50879012)State Key Laboratory of Robotics and System (HIT) (Grant No. SKLRS200706)
文摘In the case of Autonomous Underwater Vehicle （AUV） navigating with low speed near water surface, a new method for design of roll motion controller is proposed in order to restrain wave disturbance effectively and improve roll stabilizing performance. Robust control is applied, which is based on uncertain nonlinear horizontal motion model of AUV and the principle of zero speed fin stabilizer. Feedback linearization approach is used to transform the complex nonlinear system into a comparatively simple linear system. For parameter uncertainty of motion model, the controller is designed with mixed-sensitivity method based on H-infinity robust control theory. Simulation results show better robustness improved by this control method for roll stabilizing of AUV navigating near water surface.
文摘In this paper we show thc method of energy in part with which we can get the model of random wave,and predict theroll motion of unstabilized ship and stabilized ship using the wave model.The control parameters of fin stabilizer are determinedaccording to the performance index. The simulation of the system is also made in this paper. The comparison of the simulationwith real ship indicates that the method can be used in the prediction of roll motion of a stabilized ship in random wave.
