Structural health monitoring of long-span suspension bridges using wavelet packet analysis

During the service life of civil engineering structures such as long-span bridges, local damage at key positions may continually accumulate, and may finally result in their sudden failure. One core issue of global vibration-based health monitoring methods is to seek some damage indices that are sensitive to structural damage, This paper proposes an online structural health monitoring method for long-span suspension bridges using wavelet packet transform （WPT）. The WPT- based method is based on the energy variations of structural ambient vibration responses decomposed using wavelet packet analysis. The main feature of this method is that the proposed wavelet packet energy spectrum （WPES） has the ability to detect structural damage from ambient vibration tests of a long-span suspension bridge. As an example application, the WPES-based health monitoring system is used on the Runyang Suspension Bridge under daily environmental conditions. The analysis reveals that changes in environmental temperature have a long-term influence on the WPES, while the effect of traffic loadings on the measured WPES of the bridge presents instantaneous changes because of the nonstationary properties of the loadings. The condition indication indices VD reflect the influences of environmental temperature on the dynamic properties of the Runyang Suspension Bridge. The field tests demonstrate that the proposed WPES-based condition indication index VD is a good candidate index for health monitoring of long-span suspension bridges under ambient excitations.

HYBRID WAVELET PACKET-TEAGER ENERGY OPERATOR ANALYSIS AND ITS APPLICATION FOR GEARBOX FAULT DIAGNOSIS

Based on wavelet packet decomposition （WPD） algorithm and Teager energy operator （TEO）, a novel gearbox fault detection and diagnosis method is proposed. Its process is expatiated after the principles of WPD and TEO modulation are introduced respectively. The preprocessed sigaaal is interpolated with the cubic spline function, then expanded over the selected basis wavelets. Grouping its wavelet packet components of the signal based on the minimum entropy criterion, the interpolated signal can be decomposed into its dominant components with nearly distinct fault frequency contents. To extract the demodulation information of each dominant component, TEO is used. The performance of the proposed method is assessed by means of several tests on vibration signals collected from the gearbox mounted on a heavy truck. It is proved that hybrid WPD-TEO method is effective and robust for detecting and diagnosing localized gearbox faults.

A NOVEL METHOD FOR NETWORK WORM DETECTION BASED ON WAVELET PACKET ANALYSIS

Objective To detect unknown network worm at its early propagation stage. Methods On the basis of characteristics of network worm attack, the concept of failed connection flow (FCT) was defined. Based on wavelet packet analysis of FCT time series, this method computed the energy associated with each wavelet packet of FCT time series, transformed the FCT time series into a series of energy distribution vector on frequency domain, then a trained K-nearest neighbor (KNN) classifier was applied to identify the worm. Results The experiment showed that the method could identify network worm when the worm started to scan. Compared to theoretic value, the identification error ratio was 5.69%. Conclusion The method can detect unknown network worm at its early propagation stage effectively.

Diagnosis of Vocal Cord Paralysis in Anaesthesia

Vocal cord paralysis can occur as a complication o surgery or anaesthesia,if permanent is a significant clinica problem.Early detection is important to optimize the chance o repair,and avoid complications associated with an impaired swallow.An algorithm to detect altered vocal cord function was presented based on wavelet packet analysis(WPA) and suppor vector machines(SVM),and compared with the Hoarseness Diagram method(HDm),which was reported as an objective voice quality evaluation approach and could be used for pathological voice discrimination.Experiments using voice signals recorded from subjects before and after the procedure show high classification accuracy with the new algorithm,whereas HDm fails in the detection of a hoarse voice.This finding would help to develop a screening tool to detect the vocal structure damage during surgery.

Orthogonal Wavelet Packet Analysis Based Chaos Recognition Method

The chaotic motion characteristics are expounded by taking the Duffing equation system as an example.The frequency band segmentation ability and the frequency resolution of the orthogonal multiresolution analysis and the orthogonal wavelet packet analysis are compared.A new orthogonal wavelet packet analysis-based chaos recognition method for chaotic motion characteristics is put forward.The chaotic,random,and periodic motions are identified effectively by use of the subfrequency band energy distribution in the signal spectrum.The characteristic frequency of chaotic motion is thus extracted.

Quantitative Diagnosis of Fault Severity Trend of Rolling Element Bearings

The condition monitoring and fault diagnosis of rolling element bearings are particularly crucial in rotating mechanical applications in industry. A bearing fault signal contains information not only about fault condition and fault type but also the severity of the fault. This means fault severity quantitative analysis is one of most active and valid ways to realize proper maintenance decision. Aiming at the deficiency of the research in bearing single point pitting fault quantitative diagnosis, a new back-propagation neural network method based on wavelet packet decomposition coefficient entropy is proposed. The three levels of wavelet packet coefficient entropy（WPCE） is introduced as a characteristic input vector to the BPNN. Compared with the wavelet packet decomposition energy ratio input vector, WPCE shows more sensitive in distinguishing from the different fault severity degree of the measured signal. The engineering application results show that the quantitative trend fault diagnosis is realized in the different fault degree of the single point bearing pitting fault. The breakthrough attempt from quantitative to qualitative on the pattern recognition of rolling element bearings fault diagnosis is realized.