Drought-resistant plants exhibit strong water retention capability.In this regard,the autotetraploid sour jujube leaves exhibit better water retention than diploid leaves.Morphological comparisons and physiological co...Drought-resistant plants exhibit strong water retention capability.In this regard,the autotetraploid sour jujube leaves exhibit better water retention than diploid leaves.Morphological comparisons and physiological comparisons of diploid and autotetraploid leaves showed that the autotetraploid leaves had thicker leaf cuticles and more leaf wax accumulation than the diploid leaves,which could reduce cuticle permeability and improve the drought tolerance of leaves.In this study,the cuticular wax crystalloids on the adaxial and abaxial sides of young and mature jujube leaves were observed in the two ploidy types,and unique cuticular wax crystalloids covering a large area of the cuticle on autotetraploid sour jujube leaves may provide an advantage in reducing leaf non-stomata transpiration and improving plant drought tolerance.Based on the transcriptome,115 differentially expressed genes between diploids and autotetraploids were further analyzed and found to be involved in the accumulation of cuticular wax components,including terpenoids,fatty acids,and lipids,as well as ABC transporter and wax biosynthetic process.Finally,14 genes differentially expressed between glossy autotetraploid leaves and nonglossy diploid leaves,such as LOC107414787,LOC107411574 and LOC107413721,were screened as candidate genes by qRT-PCR analysis.This findings provided insights into how polyploidization improved drought tolerance.展开更多
The cuticular wax,acting as the ultimate defense barrier,is essential for the normal morphogenesis of plant organs.Despite this importance,the connection between wax composition and leaf development has not been thoro...The cuticular wax,acting as the ultimate defense barrier,is essential for the normal morphogenesis of plant organs.Despite this importance,the connection between wax composition and leaf development has not been thoroughly explored.In this study,we characterized a new maize mutant,ragged leaf4(rgd4),which exhibits crinkled and ragged leaves starting from the sixth leaf stage.The phenotype of rgd4 is conferred by ZmCER1,which encoding an aldehyde decarbonylase involved in wax biosynthesis.ZmCER1 function deficient mutant displayed reduced cuticular wax density and disordered bulliform cells(BCs),while ZmCER1 overexpressing plants exhibited the opposite effects,indicating that ZmCER1 regulates cuticular wax biosynthesis and BCs development.Additionally,as the density of cuticular wax increased,the water loss rate of detached leaf decreases,suggesting that ZmCER1 is positively correlated with plant drought tolerance.展开更多
A hard problem that hinders the movement of waxy crude oil is wax deposition in oil pipelines.To ensure the safe operation of crude oil pipelines,an accurate model must be developed to predict the rate of wax depositi...A hard problem that hinders the movement of waxy crude oil is wax deposition in oil pipelines.To ensure the safe operation of crude oil pipelines,an accurate model must be developed to predict the rate of wax deposition in crude oil pipelines.Aiming at the shortcomings of the ENN prediction model,which easily falls into the local minimum value and weak generalization ability in the implementation process,an optimized ENN prediction model based on the IRSA is proposed.The validity of the new model was confirmed by the accurate prediction of two sets of experimental data on wax deposition in crude oil pipelines.The two groups of crude oil wax deposition rate case prediction results showed that the average absolute percentage errors of IRSA-ENN prediction models is 0.5476% and 0.7831%,respectively.Additionally,it shows a higher prediction accuracy compared to the ENN prediction model.In fact,the new model established by using the IRSA to optimize ENN can optimize the initial weights and thresholds in the prediction process,which can overcome the shortcomings of the ENN prediction model,such as weak generalization ability and tendency to fall into the local minimum value,so that it has the advantages of strong implementation and high prediction accuracy.展开更多
Efforts to improve crop yields with efficient use of fertilizers are needed to guarantee global food security.Enhanced slow-release fertilizer systems(SRFs)encapsulated in biodegradable matrices are being developed to...Efforts to improve crop yields with efficient use of fertilizers are needed to guarantee global food security.Enhanced slow-release fertilizer systems(SRFs)encapsulated in biodegradable matrices are being developed to address this global concern.From a wide range of strategies for SRFs development,we explored a natureinspired solution based on the plant cuticle model and its function as a membrane for water and nutrient transport control.Here,Candelilla wax,extracted from Candelilla wild plants(Euphorbia antisyphilitica),is studied as a renewable slow-release matrix for fertilizers encapsulated by a modified spray chilling process.From this process,microencapsulates containing 40 wt%of phosphorus fertilizer are obtained with distinctive sizes and chemical characteristics,presenting a slow-release behavior.Considering the abovementioned features,novel insights into fertilizer release mechanisms based on plant cuticle models are discussed.展开更多
This paper investigated the effects of pre-heating treatment temperatures(T_(pre))on the flowability and wax deposition characteristics of a typical waxy crude oil after adding wax inhibitors.It is found that there is...This paper investigated the effects of pre-heating treatment temperatures(T_(pre))on the flowability and wax deposition characteristics of a typical waxy crude oil after adding wax inhibitors.It is found that there is little difference in wax precipitation exothermic characteristics of crude oils at different T_(pre),as well as the wax crystal solubility coefficient in the temperature range of 25-30℃.For the undoped crude oil,the flowability after wax precipitation gets much improved and the wax deposition is alleviated as T_(pre)increasing.At T_(pre)=50℃,the viscosity and wax deposition rate of crude oil adding wax inhibitors are higher than those of the undoped crude oil.When the T_(pre)increases to 60,70,and 80℃,the flowability of the doped crude oil are largely improved and the wax deposition is suppressed with the T_(pre)increase,but the wax content of wax deposit increases gradually.It is speculated that,on the one hand,the T_(pre)increase helps the dispersion of asphaltenes into smaller sizes,which facilitates the co-crystallization with paraffin waxes and generates more aggregated wax crystal flocs.This weakens the low-temperature gel structure and increases the solid concentration required for the crosslink to form the wax deposit.On the other hand,the decrease in viscosity increases the diffusion rate of wax molecules and accelerates the aging of wax deposits.The experimental results have important guiding significance for the pipeline transportation of doped crude oils.展开更多
Drought and heat stresses cause yield losses in alfalfa,a forage crop cultivated worldwide.Improving its drought and heat tolerance is desirable for maintaining alfalfa productivity in hot,arid regions.Cuticular wax f...Drought and heat stresses cause yield losses in alfalfa,a forage crop cultivated worldwide.Improving its drought and heat tolerance is desirable for maintaining alfalfa productivity in hot,arid regions.Cuticular wax forms a protective barrier on aerial surfaces of land plants against environmental stresses.ABCG11encodes an ATP binding cassette(ABC) transporter that functions in the cuticular wax transport pathway.In this study,Zx ABCG11 from the xerophyte Zygophyllum xanthoxylum was introduced into alfalfa by Agrobacterium tumefaciens-mediated transformation.Compared to the wild type(WT),transgenic alfalfa displayed faster growth,higher wax crystal density,and thicker cuticle on leaves under normal condition.Under either drought or heat treatment in greenhouse conditions,the plant height and shoot biomass of transgenic lines were significantly higher than those of the WT.Transgenic alfalfa showed excellent growth and 50% greater hay yield than WT under field conditions in a hot,arid region.Overexpression of Zx ABCG11 up-regulated wax-related genes and resulted in more cuticular wax deposition,which contributed to reduction of cuticle permeability and thus increased water retention and photosynthesis capacity of transgenic alfalfa.Thus,overexpression of Zx ABCG11 can simultaneously improve biomass yield,drought and heat tolerance in alfalfa by increasing cuticular wax deposition.Our study provides a promising avenue for developing novel forage cultivars suitable for planting in hot,arid,marginal lands.展开更多
Over the past half-century, plastic consumption has grown rapidly due to its versatility, low cost, and unrivaled functional properties. Among the diff erent implemented strategies for recycling waste plastics, pyroly...Over the past half-century, plastic consumption has grown rapidly due to its versatility, low cost, and unrivaled functional properties. Among the diff erent implemented strategies for recycling waste plastics, pyrolysis is deemed the most economical option. Currently, the wax obtained from the pyrolysis of waste plastics is mainly used as a feedstock to manufacture chemicals and fuels or added to asphalt for pavement construction, with no other applications of wax being reported. Herein, the thermal pyrolysis of three common waste polyolefin plastics: high-density polyethylene(HDPE), low-density polyethylene(LDPE), and polypropylene(PP), was conducted at 450 ℃. The waste plastics-derived waxes were characterized and studied for a potential new application: phase change materials(PCMs) for thermal energy storage(TES). Gas chromatography–mass spectrometry analysis showed that paraffin makes up most of the composition of HDPE and LDPE waxes, whereas PP wax contains a mixture of naphthene, isoparaffin, olefin, and paraffin. Diff erential scanning calorimetry(DSC) analysis indicated that HDPE and LDPE waxes have a peak melting temperature of 33.8 ℃ and 40.3 ℃, with a relatively high latent heat of 103.2 J/g and 88.3 J/g, respectively, whereas the PP wax was found to have almost negligible latent heat. Fourier transform infrared spectroscopy and DSC results revealed good chemical and thermal stability of HDPE and LDPE waxes after 100 cycles of thermal cycling. Performance evaluation of the waxes was also conducted using a thermal storage pad to understand their thermoregulation characteristics for TES applications.展开更多
Thermal interface materials(TIMs) play a vital role in the thermal management of electronic devices and can significantly reduce thermal contact resistance(TCR). The TCR between the solid–liquid contact surface is mu...Thermal interface materials(TIMs) play a vital role in the thermal management of electronic devices and can significantly reduce thermal contact resistance(TCR). The TCR between the solid–liquid contact surface is much smaller than that of the solid–solid contact surface, but conventional solid–liquid phase change materials are likely to cause serious leakage. Therefore, this work has prepared a new formstable phase change thermal interface material. Through the melt blending of paraffin wax(PW) and low-density polyethylene(LDPE), the stability is improved and it has an excellent coating effect on PW. The addition of aluminum(Al) powder improves the low thermal conductivity of PW/LDPE, and the addition of 15wt% Al powder improves the thermal conductivity of the internal structure of the matrix by 67%. In addition, the influence of the addition of Al powder on the internal structure, thermal properties, and phase change behavior of the PW/LDPE matrix was systematically studied. The results confirmed that the addition of Al powder improved the thermal conductivity of the material without a significant impact on other properties, and the thermal conductivity increased with the increase of Al addition. Therefore, morphologically stable PW/LDPE/Al is an important development direction for TIMs.展开更多
To produce low olefin gasoline with high octane number by Fischer-Tropsch (F-T) wax fluid catalytic cracking (FCC) process, operating conditions optimization were carried out in the pilot-scale riser and turbulent flu...To produce low olefin gasoline with high octane number by Fischer-Tropsch (F-T) wax fluid catalytic cracking (FCC) process, operating conditions optimization were carried out in the pilot-scale riser and turbulent fluidized bed (TFB) FCC unit. The experimental results in the riser indicated that under the condition of low reaction temperature and regenerated catalyst temperature, large catalyst-to-oil weight ratio (C/O) and long reaction time, the gasoline olefin content could be reduced to 20.28 wt%, but there is large octane number loss owing to a great loss in high octane number olefin. Therefore, a novel FCC process using the TFB reactor was proposed to strengthen the aromatization reaction. The reaction performance of TFB reactor were investigated. The result demonstrated that the TFB reactor has more significant effect in reducing olefins and improving aromatics. At the expense of certain gasoline yield, the gasoline olefin content reduced to 23.70 wt%, aromatics content could increase to 26.79 wt% and the RON was up to 91.0. The comparison of reactor structure and fluidization demonstrated that the TFB reactor has higher catalyst bed density. The reaction heat and coke combustion heat was calculated indicating the feasibility of its industrial application of the TFB process.展开更多
In situ mRNA hybridization(ISH)is a powerful tool for examining the spatiotemporal expression of genes in shoot apical meristems and flower buds of cucumber.The most common ISH protocol uses paraffin wax;however,embed...In situ mRNA hybridization(ISH)is a powerful tool for examining the spatiotemporal expression of genes in shoot apical meristems and flower buds of cucumber.The most common ISH protocol uses paraffin wax;however,embedding tissue in paraffin wax can take a long time and might result in RNA degradation and decreased signals.Here,we developed an optimized protocol to simplify the process and improve RNA sensitivity.We combined embedding tissue in low melting-point Steedman’s wax with processing tissue sections in solution,as in the whole-mount ISH method in the optimized protocol.Using the optimized protocol,we examined the expression patterns of the CLAVATA3(CLV3)and WUSCHEL(WUS)genes in shoot apical meristems and floral meristems of Cucumis sativus(cucumber)and Arabidopsis thaliana(Arabidopsis).The optimized protocol saved 4–5 days of experimental period compared with the standard ISH protocol using paraffin wax.Moreover,the optimized protocol achieved high signal sensitivity.The optimized protocol was successful for both cucumber and Arabidopsis,which indicates it might have general applicability to most plants.展开更多
Wax deposition in oil-water stratified flow is commonly encountered onshore and offshore oil production pipe systems,and typically reduces transportation capacity of oil.The accurate predicted model of wax deposition ...Wax deposition in oil-water stratified flow is commonly encountered onshore and offshore oil production pipe systems,and typically reduces transportation capacity of oil.The accurate predicted model of wax deposition has becomes an indispensable approach to design effective remediation strategies.However,a reliable mechanistic model for wax deposition prediction in oil-water two-phase stratified pipe flow is lacking to validate the deposition process.In this work,a three-dimensional(axial,radial,and angular)robust wax deposit model for oil-water stratified circular pipe flow was developed.The model of formation of a gel deposit based on the first principles of rheology was developed,associated with the results obtained from hydrodynamics and heat/mass transfer simulations.The predictions for wax deposition are found to compare satisfactorily with experimental data with two different oils for single phase and four different water cuts for oil-water stratified pipe flow.It can be seen from the wax gelation mechanism that an increase in water cut can help to reduce the wall/oil-deposit interface shear stress,thereby leading to an increase in the degree of gelation as well as the deposit rate.Furthermore,a local deposit analysis in the circumferential direction was conducted,for water cut 75%and total flow rate 5 m3/h,which provided insights to understand that the thickness on pipe wall was roughly uniformly distributed locates near the top of the pipe and the nearer the position gets close to two points,where the oil-water interface contacts the inner wall,the deposition thickness quickly dropped to 0.It was attributed to the fact that a roughly uniformly thickness far away from the oil-water interface contact the inner wall resulted in the slowly changes temperature along the circumferential pipe wall wetted by oil.展开更多
The coupled formation of wax crystals and hydrates is a critical issue for the safety of deep-sea oil and gas exploration and subsea transport pipeline flow.Therefore,this paper conducts an experimental study on the c...The coupled formation of wax crystals and hydrates is a critical issue for the safety of deep-sea oil and gas exploration and subsea transport pipeline flow.Therefore,this paper conducts an experimental study on the characteristics of methane hydrate formation in a water-in-oil(W/O)system with different wax crystal contents and explores the influence of different initial experimental pressures on the induction period and maximum rate of hydrate formation.The wavelet function was introduced to process the reaction rate and calculate the maximum speed of hydrate formation.Notably,the higher the pressure,the smaller the maximum rate of hydrate formation.We observed that wax crystal precipitation increases the viscosity of the emulsion,which limits the diffusion of gas in the liquid phase during hydrate nucleation and thus delays the hydrate nucleation.The methane gas precipitation also affects the remaining fraction’s wax content and therefore affects the wax precipitation.Secondary hydrate formation was observed several times during the experiment,increasing the risk of pipeline blockage.Overall,this work provides insights into the effect of wax crystal precipitation on hydrate behaviour that could facilitate flow assurance applications in subsea multiphase pipelines and inform the safe transportation of oil and gas pipelines.展开更多
Objective: To investigate the effect of wax therapy in pain care of patients with rheumatoid arthritis. Methods: Convenience sampling method was used to select inpatients with rheumatoid arthritis admitted to the rheu...Objective: To investigate the effect of wax therapy in pain care of patients with rheumatoid arthritis. Methods: Convenience sampling method was used to select inpatients with rheumatoid arthritis admitted to the rheumatology and immunology department of a 3A hospital in Jingzhou City. 75 patients from January 2021 to June 2021 were selected as the control group, and 75 patients from January 2022 to June 2022 were selected as the observation group. The control group was given routine nursing, and the observation group was implemented wax therapy nursing on the basis of the control group. The relief of clinical symptoms (morning stiffness time, pain score) and quality of life score of the two groups were observed. Results: After intervention, there was statistical significance between the two groups (P Conclusion: Wax therapy can improve the time of morning stiffness, the degree of pain and the quality of life of patients with rheumatoid arthritis.展开更多
Natural wax gelators have different compositions of compounds(hydrocarbons,wax esters,free fatty alcohols,and free fatty acids),which results in oleogels with varying properties.To maintain a consistent composition,th...Natural wax gelators have different compositions of compounds(hydrocarbons,wax esters,free fatty alcohols,and free fatty acids),which results in oleogels with varying properties.To maintain a consistent composition,the individual components can be added to the original wax gelator.The content of hydrocarbons and wax esters greatly affects the structuring process of liquid edible oils with waxes.The aim of this study was to evaluate the possibility of modifying the properties of beeswax as a gelling agent by adding hydrocarbons or monoesters to obtain oleogels with specific properties.Various tests were conducted to assess the changes in the oleogel properties,such as color,microstructure,oil-binding capacity,thermal and textural properties.The research results have shown that the addition of the studied fractions has led to a significant change in all properties of oleogels.The initial size of oleogel crystals(7.29±1.80μm)changed after adding fractions,varying from 5.28μm to 12.58μm with hydrocarbons and from 9.95μm to 30.41μm with wax esters.The addition of 30%–50% hydrocarbons decreased the ability of the oleogels to bind oil and made them less firm compared to samples with 10%-20% hydrocarbons.Adding 10%-20% monoesters increased the firmness of the oleogels,but this indicator decreased when their content was increased to 50%.The obtained data indicate that hydrocarbons and wax esters can be used for targeted correction of the gelling properties of beeswax.展开更多
The present study investigated the wax deposition tendencies of a light Malaysian crude oil(42.4° API), and the wax inhibiting potential of some surfactants and their blends with nanoparticles. With the knowled...The present study investigated the wax deposition tendencies of a light Malaysian crude oil(42.4° API), and the wax inhibiting potential of some surfactants and their blends with nanoparticles. With the knowledge that the majority of the wax inhibition research revolved around polymeric wax inhibitors, which cause environmental issues, we highlighted the potential of surfactants and their blend with SiO2 nanoparticles as wax deposition inhibitors. Different surfactants including oil-based, silane-based, Gemini and bio-surfactants were considered as primary surfactants. The primary surfactants and their respective blends at a concentration of 400 ppm were screened as wax inhibitor candidates using cold finger apparatus. The screening results showed a significant influence on the paraffin inhibition efficiency on wax deposition by using 400 ppm of silane-based surfactant, which decreased the wax deposition up to 53.9% as compared to that of the untreated crude oil. The inhibition efficiency among the silane-based surfactant(highest) and bio-surfactant(lowest)revealed an appreciable difference up to 36.5%. Furthermore, the wax from the treated sample was found to deposit in a thin gel-like form, which adhered inadequately to the surface of the cold finger. A further investigation by blending the 400 ppm silane-based surfactant with a 400 ppm SiO2 nanoparticle suspension in a load ratio of 3:1 found that the wax inhibition decreased up to 81% as compared to the scenario when they were not added. However, we have shown that the synergy between the silane-based surfactant and the nanoparticles is influenced by the concentration and load ratio of surfactant and nanoparticles, residence time, differential temperature and rotation rate.展开更多
基金supported by grants from the Fundamental Research Funds for the Central Universities(Grant No.2021JD02)the National Key Research and Development Program of China(Grant No.2018YFD1000607)。
文摘Drought-resistant plants exhibit strong water retention capability.In this regard,the autotetraploid sour jujube leaves exhibit better water retention than diploid leaves.Morphological comparisons and physiological comparisons of diploid and autotetraploid leaves showed that the autotetraploid leaves had thicker leaf cuticles and more leaf wax accumulation than the diploid leaves,which could reduce cuticle permeability and improve the drought tolerance of leaves.In this study,the cuticular wax crystalloids on the adaxial and abaxial sides of young and mature jujube leaves were observed in the two ploidy types,and unique cuticular wax crystalloids covering a large area of the cuticle on autotetraploid sour jujube leaves may provide an advantage in reducing leaf non-stomata transpiration and improving plant drought tolerance.Based on the transcriptome,115 differentially expressed genes between diploids and autotetraploids were further analyzed and found to be involved in the accumulation of cuticular wax components,including terpenoids,fatty acids,and lipids,as well as ABC transporter and wax biosynthetic process.Finally,14 genes differentially expressed between glossy autotetraploid leaves and nonglossy diploid leaves,such as LOC107414787,LOC107411574 and LOC107413721,were screened as candidate genes by qRT-PCR analysis.This findings provided insights into how polyploidization improved drought tolerance.
基金supported by Professor Zhukuan Cheng from Institute of Genetics and Developmental Biology,Chinese Academy of Sciencessupported by the Funds of Key R&D Program of Shandong Province(2022LZGC006)Key R&D Program of Shandong Province(2023LZGC006)。
文摘The cuticular wax,acting as the ultimate defense barrier,is essential for the normal morphogenesis of plant organs.Despite this importance,the connection between wax composition and leaf development has not been thoroughly explored.In this study,we characterized a new maize mutant,ragged leaf4(rgd4),which exhibits crinkled and ragged leaves starting from the sixth leaf stage.The phenotype of rgd4 is conferred by ZmCER1,which encoding an aldehyde decarbonylase involved in wax biosynthesis.ZmCER1 function deficient mutant displayed reduced cuticular wax density and disordered bulliform cells(BCs),while ZmCER1 overexpressing plants exhibited the opposite effects,indicating that ZmCER1 regulates cuticular wax biosynthesis and BCs development.Additionally,as the density of cuticular wax increased,the water loss rate of detached leaf decreases,suggesting that ZmCER1 is positively correlated with plant drought tolerance.
文摘A hard problem that hinders the movement of waxy crude oil is wax deposition in oil pipelines.To ensure the safe operation of crude oil pipelines,an accurate model must be developed to predict the rate of wax deposition in crude oil pipelines.Aiming at the shortcomings of the ENN prediction model,which easily falls into the local minimum value and weak generalization ability in the implementation process,an optimized ENN prediction model based on the IRSA is proposed.The validity of the new model was confirmed by the accurate prediction of two sets of experimental data on wax deposition in crude oil pipelines.The two groups of crude oil wax deposition rate case prediction results showed that the average absolute percentage errors of IRSA-ENN prediction models is 0.5476% and 0.7831%,respectively.Additionally,it shows a higher prediction accuracy compared to the ENN prediction model.In fact,the new model established by using the IRSA to optimize ENN can optimize the initial weights and thresholds in the prediction process,which can overcome the shortcomings of the ENN prediction model,such as weak generalization ability and tendency to fall into the local minimum value,so that it has the advantages of strong implementation and high prediction accuracy.
文摘Efforts to improve crop yields with efficient use of fertilizers are needed to guarantee global food security.Enhanced slow-release fertilizer systems(SRFs)encapsulated in biodegradable matrices are being developed to address this global concern.From a wide range of strategies for SRFs development,we explored a natureinspired solution based on the plant cuticle model and its function as a membrane for water and nutrient transport control.Here,Candelilla wax,extracted from Candelilla wild plants(Euphorbia antisyphilitica),is studied as a renewable slow-release matrix for fertilizers encapsulated by a modified spray chilling process.From this process,microencapsulates containing 40 wt%of phosphorus fertilizer are obtained with distinctive sizes and chemical characteristics,presenting a slow-release behavior.Considering the abovementioned features,novel insights into fertilizer release mechanisms based on plant cuticle models are discussed.
基金The authors thank the financial support from the National Natural Science Foundation of China(51904327,U19B2012)China University of Petroleum Innovation Project(22CX06050A).
文摘This paper investigated the effects of pre-heating treatment temperatures(T_(pre))on the flowability and wax deposition characteristics of a typical waxy crude oil after adding wax inhibitors.It is found that there is little difference in wax precipitation exothermic characteristics of crude oils at different T_(pre),as well as the wax crystal solubility coefficient in the temperature range of 25-30℃.For the undoped crude oil,the flowability after wax precipitation gets much improved and the wax deposition is alleviated as T_(pre)increasing.At T_(pre)=50℃,the viscosity and wax deposition rate of crude oil adding wax inhibitors are higher than those of the undoped crude oil.When the T_(pre)increases to 60,70,and 80℃,the flowability of the doped crude oil are largely improved and the wax deposition is suppressed with the T_(pre)increase,but the wax content of wax deposit increases gradually.It is speculated that,on the one hand,the T_(pre)increase helps the dispersion of asphaltenes into smaller sizes,which facilitates the co-crystallization with paraffin waxes and generates more aggregated wax crystal flocs.This weakens the low-temperature gel structure and increases the solid concentration required for the crosslink to form the wax deposit.On the other hand,the decrease in viscosity increases the diffusion rate of wax molecules and accelerates the aging of wax deposits.The experimental results have important guiding significance for the pipeline transportation of doped crude oils.
基金supported by the National Key Research and Development Program of China (2022YFF1003200)the National Natural Science Foundation of China (31730093)。
文摘Drought and heat stresses cause yield losses in alfalfa,a forage crop cultivated worldwide.Improving its drought and heat tolerance is desirable for maintaining alfalfa productivity in hot,arid regions.Cuticular wax forms a protective barrier on aerial surfaces of land plants against environmental stresses.ABCG11encodes an ATP binding cassette(ABC) transporter that functions in the cuticular wax transport pathway.In this study,Zx ABCG11 from the xerophyte Zygophyllum xanthoxylum was introduced into alfalfa by Agrobacterium tumefaciens-mediated transformation.Compared to the wild type(WT),transgenic alfalfa displayed faster growth,higher wax crystal density,and thicker cuticle on leaves under normal condition.Under either drought or heat treatment in greenhouse conditions,the plant height and shoot biomass of transgenic lines were significantly higher than those of the WT.Transgenic alfalfa showed excellent growth and 50% greater hay yield than WT under field conditions in a hot,arid region.Overexpression of Zx ABCG11 up-regulated wax-related genes and resulted in more cuticular wax deposition,which contributed to reduction of cuticle permeability and thus increased water retention and photosynthesis capacity of transgenic alfalfa.Thus,overexpression of Zx ABCG11 can simultaneously improve biomass yield,drought and heat tolerance in alfalfa by increasing cuticular wax deposition.Our study provides a promising avenue for developing novel forage cultivars suitable for planting in hot,arid,marginal lands.
基金financial support from Individual Research Grant (Grant reference No.: A20E7c0109) of the Agency for Science,Technology and Research of Singapore (A*STAR)。
文摘Over the past half-century, plastic consumption has grown rapidly due to its versatility, low cost, and unrivaled functional properties. Among the diff erent implemented strategies for recycling waste plastics, pyrolysis is deemed the most economical option. Currently, the wax obtained from the pyrolysis of waste plastics is mainly used as a feedstock to manufacture chemicals and fuels or added to asphalt for pavement construction, with no other applications of wax being reported. Herein, the thermal pyrolysis of three common waste polyolefin plastics: high-density polyethylene(HDPE), low-density polyethylene(LDPE), and polypropylene(PP), was conducted at 450 ℃. The waste plastics-derived waxes were characterized and studied for a potential new application: phase change materials(PCMs) for thermal energy storage(TES). Gas chromatography–mass spectrometry analysis showed that paraffin makes up most of the composition of HDPE and LDPE waxes, whereas PP wax contains a mixture of naphthene, isoparaffin, olefin, and paraffin. Diff erential scanning calorimetry(DSC) analysis indicated that HDPE and LDPE waxes have a peak melting temperature of 33.8 ℃ and 40.3 ℃, with a relatively high latent heat of 103.2 J/g and 88.3 J/g, respectively, whereas the PP wax was found to have almost negligible latent heat. Fourier transform infrared spectroscopy and DSC results revealed good chemical and thermal stability of HDPE and LDPE waxes after 100 cycles of thermal cycling. Performance evaluation of the waxes was also conducted using a thermal storage pad to understand their thermoregulation characteristics for TES applications.
基金supported by the National Natural Science Foundation of China, China (No. 51874047)the Key Science and Technology Project of Changsha City, China (No. kq2102005)+1 种基金the Special Fund for the Construction of Innovative Province in Hunan Province, China (No. 2020RC3038)the Changsha City Fund for Distinguished and Innovative Young Scholars, China (No. kq1802007)。
文摘Thermal interface materials(TIMs) play a vital role in the thermal management of electronic devices and can significantly reduce thermal contact resistance(TCR). The TCR between the solid–liquid contact surface is much smaller than that of the solid–solid contact surface, but conventional solid–liquid phase change materials are likely to cause serious leakage. Therefore, this work has prepared a new formstable phase change thermal interface material. Through the melt blending of paraffin wax(PW) and low-density polyethylene(LDPE), the stability is improved and it has an excellent coating effect on PW. The addition of aluminum(Al) powder improves the low thermal conductivity of PW/LDPE, and the addition of 15wt% Al powder improves the thermal conductivity of the internal structure of the matrix by 67%. In addition, the influence of the addition of Al powder on the internal structure, thermal properties, and phase change behavior of the PW/LDPE matrix was systematically studied. The results confirmed that the addition of Al powder improved the thermal conductivity of the material without a significant impact on other properties, and the thermal conductivity increased with the increase of Al addition. Therefore, morphologically stable PW/LDPE/Al is an important development direction for TIMs.
基金supported by the National Key Research and Development Program of China(2017YFB0602504)the General Program of National Natural Science Foundation of China(22178385).
文摘To produce low olefin gasoline with high octane number by Fischer-Tropsch (F-T) wax fluid catalytic cracking (FCC) process, operating conditions optimization were carried out in the pilot-scale riser and turbulent fluidized bed (TFB) FCC unit. The experimental results in the riser indicated that under the condition of low reaction temperature and regenerated catalyst temperature, large catalyst-to-oil weight ratio (C/O) and long reaction time, the gasoline olefin content could be reduced to 20.28 wt%, but there is large octane number loss owing to a great loss in high octane number olefin. Therefore, a novel FCC process using the TFB reactor was proposed to strengthen the aromatization reaction. The reaction performance of TFB reactor were investigated. The result demonstrated that the TFB reactor has more significant effect in reducing olefins and improving aromatics. At the expense of certain gasoline yield, the gasoline olefin content reduced to 23.70 wt%, aromatics content could increase to 26.79 wt% and the RON was up to 91.0. The comparison of reactor structure and fluidization demonstrated that the TFB reactor has higher catalyst bed density. The reaction heat and coke combustion heat was calculated indicating the feasibility of its industrial application of the TFB process.
基金supported by the National Natural Science Foundation of China(32002036)。
文摘In situ mRNA hybridization(ISH)is a powerful tool for examining the spatiotemporal expression of genes in shoot apical meristems and flower buds of cucumber.The most common ISH protocol uses paraffin wax;however,embedding tissue in paraffin wax can take a long time and might result in RNA degradation and decreased signals.Here,we developed an optimized protocol to simplify the process and improve RNA sensitivity.We combined embedding tissue in low melting-point Steedman’s wax with processing tissue sections in solution,as in the whole-mount ISH method in the optimized protocol.Using the optimized protocol,we examined the expression patterns of the CLAVATA3(CLV3)and WUSCHEL(WUS)genes in shoot apical meristems and floral meristems of Cucumis sativus(cucumber)and Arabidopsis thaliana(Arabidopsis).The optimized protocol saved 4–5 days of experimental period compared with the standard ISH protocol using paraffin wax.Moreover,the optimized protocol achieved high signal sensitivity.The optimized protocol was successful for both cucumber and Arabidopsis,which indicates it might have general applicability to most plants.
基金The work received the support of by National Natural Science Foundation of China(52272338)Major Project of Science and Technology Research Program of Chongqing Education Commission of China(KJZD-M202212901,KJZD-K202012903)Young Elite Scientists Sponsorship Program(2020-JCJQ-QT-005).
文摘Wax deposition in oil-water stratified flow is commonly encountered onshore and offshore oil production pipe systems,and typically reduces transportation capacity of oil.The accurate predicted model of wax deposition has becomes an indispensable approach to design effective remediation strategies.However,a reliable mechanistic model for wax deposition prediction in oil-water two-phase stratified pipe flow is lacking to validate the deposition process.In this work,a three-dimensional(axial,radial,and angular)robust wax deposit model for oil-water stratified circular pipe flow was developed.The model of formation of a gel deposit based on the first principles of rheology was developed,associated with the results obtained from hydrodynamics and heat/mass transfer simulations.The predictions for wax deposition are found to compare satisfactorily with experimental data with two different oils for single phase and four different water cuts for oil-water stratified pipe flow.It can be seen from the wax gelation mechanism that an increase in water cut can help to reduce the wall/oil-deposit interface shear stress,thereby leading to an increase in the degree of gelation as well as the deposit rate.Furthermore,a local deposit analysis in the circumferential direction was conducted,for water cut 75%and total flow rate 5 m3/h,which provided insights to understand that the thickness on pipe wall was roughly uniformly distributed locates near the top of the pipe and the nearer the position gets close to two points,where the oil-water interface contacts the inner wall,the deposition thickness quickly dropped to 0.It was attributed to the fact that a roughly uniformly thickness far away from the oil-water interface contact the inner wall resulted in the slowly changes temperature along the circumferential pipe wall wetted by oil.
基金supported by National Natural Science Foundation of China(Major Program No.U19B200052)Science and Technology Innovation Seedling Project of Sichuan Province,China(No.2021079)+2 种基金NationalNatural Science Foundation Young Scientists Fund of China(No.51904259)School-Level Key Program of Chengdu Technological University,China(Nos.2021ZR0062022ZR019).
文摘The coupled formation of wax crystals and hydrates is a critical issue for the safety of deep-sea oil and gas exploration and subsea transport pipeline flow.Therefore,this paper conducts an experimental study on the characteristics of methane hydrate formation in a water-in-oil(W/O)system with different wax crystal contents and explores the influence of different initial experimental pressures on the induction period and maximum rate of hydrate formation.The wavelet function was introduced to process the reaction rate and calculate the maximum speed of hydrate formation.Notably,the higher the pressure,the smaller the maximum rate of hydrate formation.We observed that wax crystal precipitation increases the viscosity of the emulsion,which limits the diffusion of gas in the liquid phase during hydrate nucleation and thus delays the hydrate nucleation.The methane gas precipitation also affects the remaining fraction’s wax content and therefore affects the wax precipitation.Secondary hydrate formation was observed several times during the experiment,increasing the risk of pipeline blockage.Overall,this work provides insights into the effect of wax crystal precipitation on hydrate behaviour that could facilitate flow assurance applications in subsea multiphase pipelines and inform the safe transportation of oil and gas pipelines.
文摘Objective: To investigate the effect of wax therapy in pain care of patients with rheumatoid arthritis. Methods: Convenience sampling method was used to select inpatients with rheumatoid arthritis admitted to the rheumatology and immunology department of a 3A hospital in Jingzhou City. 75 patients from January 2021 to June 2021 were selected as the control group, and 75 patients from January 2022 to June 2022 were selected as the observation group. The control group was given routine nursing, and the observation group was implemented wax therapy nursing on the basis of the control group. The relief of clinical symptoms (morning stiffness time, pain score) and quality of life score of the two groups were observed. Results: After intervention, there was statistical significance between the two groups (P Conclusion: Wax therapy can improve the time of morning stiffness, the degree of pain and the quality of life of patients with rheumatoid arthritis.
基金supported by the Russian Science Foundation under grant(Project No.19-16-00113).
文摘Natural wax gelators have different compositions of compounds(hydrocarbons,wax esters,free fatty alcohols,and free fatty acids),which results in oleogels with varying properties.To maintain a consistent composition,the individual components can be added to the original wax gelator.The content of hydrocarbons and wax esters greatly affects the structuring process of liquid edible oils with waxes.The aim of this study was to evaluate the possibility of modifying the properties of beeswax as a gelling agent by adding hydrocarbons or monoesters to obtain oleogels with specific properties.Various tests were conducted to assess the changes in the oleogel properties,such as color,microstructure,oil-binding capacity,thermal and textural properties.The research results have shown that the addition of the studied fractions has led to a significant change in all properties of oleogels.The initial size of oleogel crystals(7.29±1.80μm)changed after adding fractions,varying from 5.28μm to 12.58μm with hydrocarbons and from 9.95μm to 30.41μm with wax esters.The addition of 30%–50% hydrocarbons decreased the ability of the oleogels to bind oil and made them less firm compared to samples with 10%-20% hydrocarbons.Adding 10%-20% monoesters increased the firmness of the oleogels,but this indicator decreased when their content was increased to 50%.The obtained data indicate that hydrocarbons and wax esters can be used for targeted correction of the gelling properties of beeswax.
基金UCSI Universitythe Universiti Malaysia Pahang for their continuous support
文摘The present study investigated the wax deposition tendencies of a light Malaysian crude oil(42.4° API), and the wax inhibiting potential of some surfactants and their blends with nanoparticles. With the knowledge that the majority of the wax inhibition research revolved around polymeric wax inhibitors, which cause environmental issues, we highlighted the potential of surfactants and their blend with SiO2 nanoparticles as wax deposition inhibitors. Different surfactants including oil-based, silane-based, Gemini and bio-surfactants were considered as primary surfactants. The primary surfactants and their respective blends at a concentration of 400 ppm were screened as wax inhibitor candidates using cold finger apparatus. The screening results showed a significant influence on the paraffin inhibition efficiency on wax deposition by using 400 ppm of silane-based surfactant, which decreased the wax deposition up to 53.9% as compared to that of the untreated crude oil. The inhibition efficiency among the silane-based surfactant(highest) and bio-surfactant(lowest)revealed an appreciable difference up to 36.5%. Furthermore, the wax from the treated sample was found to deposit in a thin gel-like form, which adhered inadequately to the surface of the cold finger. A further investigation by blending the 400 ppm silane-based surfactant with a 400 ppm SiO2 nanoparticle suspension in a load ratio of 3:1 found that the wax inhibition decreased up to 81% as compared to the scenario when they were not added. However, we have shown that the synergy between the silane-based surfactant and the nanoparticles is influenced by the concentration and load ratio of surfactant and nanoparticles, residence time, differential temperature and rotation rate.