The scale and characteristics of rock mass are important indexes of the rock mass structural plane classification. This paper firstly analyzes the spatial distribution characteristics, the structural plane types （ori...The scale and characteristics of rock mass are important indexes of the rock mass structural plane classification. This paper firstly analyzes the spatial distribution characteristics, the structural plane types （original structural plane, tectonic structural plane and hypergenic structural plane） and the associated features of the Emeishan basalts and then studies the classification schemes of the built hydropower structure planes of different rock areas （the east district, the central district and the west district） in the Emeishan basalt distribution area, Southwest China. Based on the analysis and comparison of the scale and the engineering geological characteristics of the typical structure planes in the basalt hydroelectric Stations, the types of structural planes are used in the first order classification. The secondary order classification is made by considering the impact factors of rock mass quality, e.g., the state of the structural planes, infilling, joint opening, extending length, the grade of weathering and strength. The engineering geological classification for Emeishan basalt is proposed. Because there are no evidences of a large structure presenting in study area, the first-order （Ⅰ） controlling structural planes do not appear in the classification, there only appear Ⅱ, Ⅲ, Ⅳ and Ⅴ grade structural planes influencing the rock-mass quality. According to the different rock-block types in bedding fault zone, the second-grade （Ⅱ） structural planes consisted of bedding fault zone is further classified into Ⅱ1, Ⅱ2 and Ⅱ3. The third-grade （Ⅲ） structural planes constructed by intraformational faulted zones are not subdivided. According to the different characteristics of intrusion, alteration and weathering unloading structural planes, the Ⅳ grade structure plane is divided into Ⅳ1, Ⅳ2 and Ⅳ3. According to the development characteristics of joints and fractures, the V grade structure plane is divided into fracture Ⅴ1 and columnar joint Ⅴ2. In all, the structural planes are classified into four groups with nine subsets. The research proposes the engineering geological classification of the structural plane for the hydropower project in the Emishan basalts, and the result of the study has a potential application in similar regions.展开更多
According to the structural characteristics of gently inclined thin layer rock mass in which lots of weak interlayer existed,the concept of gently inclined thin layer weakness structure was proposed.If single-borehole...According to the structural characteristics of gently inclined thin layer rock mass in which lots of weak interlayer existed,the concept of gently inclined thin layer weakness structure was proposed.If single-borehole measuring method of the acoustic along the conventional arrangement mode was used in measuring the broken rock zone in this structure,the change of the relationship curves (Vp-L) between acoustic p-wave velocity (Vp) and borehole depth (L) would present the irregular feature due to the mechanical characteristics of layered rock mass and harmful effects of weak interlayers,and the scope of broken rock zone couldn't be defined quickly.Based on the analysis of the me- chanical characteristics of layered rock mass,the propagation rule of acoustic and distri- butions characteristics of plastic zone and slip zone in layered rock mass,new arrange- ment mode of acoustic measuring boreholes for broken rock zone in gently inclined thin layer weakness structure was proposed.Namely,the measuring boreholes in two sides were parallel to the strata,the measuring boreholes in the roof and floor perpendicular to the strata.Besides the controlling depth of the measuring boreholes in the scope of the large plastic zones or the large slip zones should be increased.Engineering example showed that new acoustic measuring boreholes arrangement mode had the better appli- cability and could determine the scope of the broken rock zone in the gently inclined thin layer weakness structure quickly.展开更多
Rod element and shell element were used in finite element software ABAQUS to establish dynamic elastic-plastic analysis model of the structure,the seismic performance of an irregular plane complex overrun structure nu...Rod element and shell element were used in finite element software ABAQUS to establish dynamic elastic-plastic analysis model of the structure,the seismic performance of an irregular plane complex overrun structure numerical simulation,the structure was calculated under different input level and displacement response of the acceleration response,and analyses the force of the wear layer column and the floor of the open hole stress level.The results were compared with the shaking table test to verify the accuracy of the numerical simulation results.The results of numerical calculation were basically consistent with the experimental results,and the finite element model basically reflected the response of the structure under the simulated earthquake.展开更多
剪切破坏区域是岩体结构面上下盘相对运动的主要接触区域,对抗剪强度具有重要影响。鉴于结构面剪切破坏区域与形貌特征的高度非线性关系,本文在分析结构面表面形貌特征及剪切机制的基础上,以粗糙度参数倾向、倾角、曲率、高差和孔径分...剪切破坏区域是岩体结构面上下盘相对运动的主要接触区域,对抗剪强度具有重要影响。鉴于结构面剪切破坏区域与形貌特征的高度非线性关系,本文在分析结构面表面形貌特征及剪切机制的基础上,以粗糙度参数倾向、倾角、曲率、高差和孔径分布来描述结构面表面形貌特征。对结构面试样开展法向应力为1.0 MPa的直剪试验,通过图像分割技术提取剪切破坏区域,利用多种机器学习方法构建结构面剪切破坏区域预测模型,建立结构面粗糙度参数与破坏状态之间的非线性关系,并采用训练准确率和AUC(Area Under Curve)值等指标对模型预测性能进行评估。结果表明所建立的模型中集成装袋树预测性能最好,其次是K最近邻,其训练准确率最高分别可达98.02%和97.38%,AUC值最高分别可达0.78和0.74。通过敏感性分析发现孔径分布对剪切破坏区域的影响最大。本研究对有效分析结构面的剪切破坏机理和准确评价抗剪强度具有重要意义。展开更多
基金funded by the National Natural Science Foundation of China (Grant No.41072228)
文摘The scale and characteristics of rock mass are important indexes of the rock mass structural plane classification. This paper firstly analyzes the spatial distribution characteristics, the structural plane types （original structural plane, tectonic structural plane and hypergenic structural plane） and the associated features of the Emeishan basalts and then studies the classification schemes of the built hydropower structure planes of different rock areas （the east district, the central district and the west district） in the Emeishan basalt distribution area, Southwest China. Based on the analysis and comparison of the scale and the engineering geological characteristics of the typical structure planes in the basalt hydroelectric Stations, the types of structural planes are used in the first order classification. The secondary order classification is made by considering the impact factors of rock mass quality, e.g., the state of the structural planes, infilling, joint opening, extending length, the grade of weathering and strength. The engineering geological classification for Emeishan basalt is proposed. Because there are no evidences of a large structure presenting in study area, the first-order （Ⅰ） controlling structural planes do not appear in the classification, there only appear Ⅱ, Ⅲ, Ⅳ and Ⅴ grade structural planes influencing the rock-mass quality. According to the different rock-block types in bedding fault zone, the second-grade （Ⅱ） structural planes consisted of bedding fault zone is further classified into Ⅱ1, Ⅱ2 and Ⅱ3. The third-grade （Ⅲ） structural planes constructed by intraformational faulted zones are not subdivided. According to the different characteristics of intrusion, alteration and weathering unloading structural planes, the Ⅳ grade structure plane is divided into Ⅳ1, Ⅳ2 and Ⅳ3. According to the development characteristics of joints and fractures, the V grade structure plane is divided into fracture Ⅴ1 and columnar joint Ⅴ2. In all, the structural planes are classified into four groups with nine subsets. The research proposes the engineering geological classification of the structural plane for the hydropower project in the Emishan basalts, and the result of the study has a potential application in similar regions.
基金the National Natural Science Foundation of China(50490274)National Key Project of Scientific and Technical Supporting Programs of China(2006BAB02A02)Guangxi University Research Foundation(X061068)
文摘According to the structural characteristics of gently inclined thin layer rock mass in which lots of weak interlayer existed,the concept of gently inclined thin layer weakness structure was proposed.If single-borehole measuring method of the acoustic along the conventional arrangement mode was used in measuring the broken rock zone in this structure,the change of the relationship curves (Vp-L) between acoustic p-wave velocity (Vp) and borehole depth (L) would present the irregular feature due to the mechanical characteristics of layered rock mass and harmful effects of weak interlayers,and the scope of broken rock zone couldn't be defined quickly.Based on the analysis of the me- chanical characteristics of layered rock mass,the propagation rule of acoustic and distri- butions characteristics of plastic zone and slip zone in layered rock mass,new arrange- ment mode of acoustic measuring boreholes for broken rock zone in gently inclined thin layer weakness structure was proposed.Namely,the measuring boreholes in two sides were parallel to the strata,the measuring boreholes in the roof and floor perpendicular to the strata.Besides the controlling depth of the measuring boreholes in the scope of the large plastic zones or the large slip zones should be increased.Engineering example showed that new acoustic measuring boreholes arrangement mode had the better appli- cability and could determine the scope of the broken rock zone in the gently inclined thin layer weakness structure quickly.
文摘Rod element and shell element were used in finite element software ABAQUS to establish dynamic elastic-plastic analysis model of the structure,the seismic performance of an irregular plane complex overrun structure numerical simulation,the structure was calculated under different input level and displacement response of the acceleration response,and analyses the force of the wear layer column and the floor of the open hole stress level.The results were compared with the shaking table test to verify the accuracy of the numerical simulation results.The results of numerical calculation were basically consistent with the experimental results,and the finite element model basically reflected the response of the structure under the simulated earthquake.
文摘剪切破坏区域是岩体结构面上下盘相对运动的主要接触区域,对抗剪强度具有重要影响。鉴于结构面剪切破坏区域与形貌特征的高度非线性关系,本文在分析结构面表面形貌特征及剪切机制的基础上,以粗糙度参数倾向、倾角、曲率、高差和孔径分布来描述结构面表面形貌特征。对结构面试样开展法向应力为1.0 MPa的直剪试验,通过图像分割技术提取剪切破坏区域,利用多种机器学习方法构建结构面剪切破坏区域预测模型,建立结构面粗糙度参数与破坏状态之间的非线性关系,并采用训练准确率和AUC(Area Under Curve)值等指标对模型预测性能进行评估。结果表明所建立的模型中集成装袋树预测性能最好,其次是K最近邻,其训练准确率最高分别可达98.02%和97.38%,AUC值最高分别可达0.78和0.74。通过敏感性分析发现孔径分布对剪切破坏区域的影响最大。本研究对有效分析结构面的剪切破坏机理和准确评价抗剪强度具有重要意义。
