Development of Prolonged Release Microspheres of Metformin Hydrochloride Using Ion Exchange Resins

Aim To prepare the prolonged-released microspheres of mefformin hydrochloride. Methods Ion-exchange resin-drug mefformin hydrochloride complexes were prepared as core materials, and followed by coating using ethylcellulose （EC） by the emulsion solvent diffusion technique. The release rate of mefformin from the microcapsules was highly dependent on the encapsulating formulation, thus being used as an index for formulation screening. Orthogonal experiments were performed to optimize the coating formulation. Results The final chosen formulation for coating of mefformin microcapsules were as follows： （ 1 ） the ratio of EC （20cps） to EC （45cps） was 50：50; （2） the ratio of plasticizer to coating materials was 20% ;and （3） the ratio of resin-mefformin complexes to coating materials was 5 ： 1. Conclusion The prolonged release microspheres of mefformin hydrochloride were successfully prepared.

Study on the influence of humic acid of different molecular weight on basic ion exchange resin's adsorption capacity

In this paper, humic acid （HA） was ultra-filtered into different molecular weight sections and was characterized by multielement analysis, UV254/TOC, FT-IR and three-dimensional fluorescence spectrometric. Since humic acids of different molecular weights have different hydrophilic and molecular size, the maximum adsorption capacity of basic ion exchange resins appears on the humic acid whose molecular weight ranges from 6000 to 10,000 Da.

Direct extraction of Mo(VI) from acidic leach solution of molybdenite ore by ion exchange resin:Batch and column adsorption studies

The adsorption behavior of ion exchange resin D301 in the extraction of hexavalent molybdenum from high acidic leach solution was investigated. SEM, EDS and Raman spectra analyses were applied to studying the adsorption capacity, reaction kinetics and possible adsorption mechanism in detail. Results showed that the adsorption capacity of D301 resin for molybdenum from high acidic leach solution was up to 463.63 mg/g. Results of the kinetic analysis indicated that the adsorption process was controlled by the particle diffusion with the activation energy 25.47 k J/mol（0.9-1.2 mm） and 20.38 k J/mol（0.6-0.9 mm）. Furthermore, the molybdenum loaded on the resin could be eluted by using 2 mol/L ammonia hydroxide solution. Besides, dynamic continuous column experiments verified direct extraction of molybdenum from acidic leach solutions by ion exchange resin D301 and the upstream flow improved dynamic continuous absorption.

Kinetic Study of Esterification of Lactic Acid with Isobutanol and n-Butanol Catalyzed by Ion-exchange Resins

The esterification reactions of lactic acid with isobutanol and n-butanol have been studied in the presence of acid ion-exchange resin Weblyst D009. The influences of catalyst loading, stirrer speed, catalyst particle size, initial reactant molar ratio and temperature on the reaction rate have been examined. Experimental kinetic data were correlated by using the pseudo-homogeneous, Langnluir-Hinshelwood and Eley-Rideal models. Nonideality of the liquid phase was taken into account by using activities instead of molar fractions. The activity coefficients were calculated according to the group contribution method UNIFAC. Provided that the nonideality of the liquid is taken into account, the esterification kinetics of lactic acid with isobutanol and n-butanol catalyzed by the acid ion-exchange resin can be described using all threemodels with reasonable errors.

Kinetic modeling of adsorption of vanadium and iron from acid solution through ion exchange resins

This study assessed the adsorption process and the reaction kinetics involved in the selective recovery of vanadium from an acid solution containing iron as an impurity.Four commercial resins were studied:Lewatit^(®)MonoPlus TP 209 XL,Lewatit^(®) TP 207,Dowex^(TM)M4195(chelating resin)and Lewatit^(®) MonoPlus S 200 H(strong cationic exchange resin).To investigate the effect of time on the adsorption process,batch experiments were carried out using the following initial conditions:pH 2.0,298 K,and a proportion of 1 g of resin to 50 mL of solution.The variation of pH over time was analyzed.Chelating resin released less H+ions as the adsorption occurred,resulting in a lower drop of pH when compared to S 200 H resin.Ion adsorption by the resins was also evaluated through FT-IR and SEM−EDS before and after the experiments.Among the evaluated kinetic models(pseudo-first order,pseudo-second order,Elovich and intraparticle diffusion models),the pseudo-second order model best fits the experimental data of the adsorption of vanadium and iron by all of the four resins.M4195 resin showed the highest recovery of vanadium and the lowest adsorption of iron.Kinetic data,which are fundamental to industrial processes applications,are provided.

Combination of chlorine and magnetic ion exchange resin for drinking water treatment of algae

The effectiveness of a magnetic ion exchange resin （MIEX） for the treatment of Hongze Lake water in China was evaluated, The kinetics of natural organic matter （NOM） removal at various MIEX doses and contact time, multiple-loading experiments, impacts of MIEX prior to coagulation on coagulant demands and the effectiveness of combination of MIEX, pre-chlorination and coagulation were investigated. Kinetic experimental results show that more than 80% UV254 and 67% dissolved organic carbon （DOC） from raw water can be removed by the use of MIEX alone. 94% sulfate, 69% nitrate and 98% bromide removals are obtained after the first use of MIEX in multiple-loading experiments. It is suggested that MIEX can be loaded up to 1 250 bed volume （BV, volume ratio of tested water to resin） or more without saturation when regarding organics removal as a target. MIEX can remove organics to a greater extend than coagulation and lower the coagulant demand when combining with coagulation. Chlorination experimental results show that MIEX can remove 57% chlorine demand and 77% trihalomethane formation potential （THMFP） for raw water. Pre-chlorination followed by MIEX and coagulation can give additional organic and THMFP removals. The results suggest that MIEX provides a new method to solve thc problem algae reproduction.

Taste masking of ciprofloxacin by ion-exchange resin and sustain release at gastric-intestinal through interpenetrating polymer network

The aim of the study was to taste mask ciprofloxacin(CP)by using ion-exchange resins(IERs)followed by sustain release of CP by forming interpenetrating polymer network(IPN).IERs based on the copolymerization of acrylic acid with different cross linking agents were synthesised.Drug-resin complexes(DRCs)with three different ratios of drug to IERs(1:1,1:2,1:4)were prepared&evaluated for taste masking by following in vivo and in vitro methods.Human volunteers graded ADC 1:4,acrylic acid-divinyl benzene(ADC-3)resin as tasteless.Characterization studies such as FTIR,SEM,DSC,P-XRD differentiated ADC 1:4,from physical mixture(PM 1:4)and confirmed the formation of complex.In vitro drug release of ADC 1:4 showed complete release of CP within 60 min at simulated gastric fluid(SGF)i.e.pH 1.2.IPN beads were prepared with ADC 1:4 by using sodium alginate(AL)and sodium alginate-chitosan(AL-CS)for sustain release of CP at SGF pH and followed by simulated intestinal fluid(SIF i.e.pH 7.4).FTIR spectra confirmed the formation of IPN beads.The release of CP was sustain at SGF pH(<20%)whereas in SIF media it was more(>75%).The kinetic model of IPN beads showed the release of CP was non-Fickian diffusion type.

Thermal Analysis and Immobilisation of Spent Ion Exchange Resin in Borosilicate Glass

The underground disposal of waste arising from the nuclear industry needs constant evaluation in order to improve upon it through minimizing the volume and cost by reducing the amount of glass used without compromising the safety of any leakage from the radioactive waste form. The immobilization of the spent resin (NRW-40) in borosilicate glass was investigated to meet the acceptance criteria for disposal of nuclear waste. The organic mixed bed resin in granular form was used as a waste target. The analysis of surrogate resin doped with radioactive and non-radioactive cesium (Cs) and cobalt (Co) was carried out to investigate their thermal and chemical properties and their compatibility with an alkaline borosilicate glass. The thermal analysis indicates that the structural damage caused by 1 mSv gamma radiation to the radioactive resin has altered its properties in comparison with the non-radioactive resin, same amount of cesium (8.88 wt%) and cobalt (1.88 wt%) were used in both resins. The immobilization of residue shows that the excess sulfur in the residue caused phase crystallization in the final glass matrix. It was found that the volatilization of Cs-137 and Co-60 from the successful radioactive resin-glass matrix (HG-3-IER-500) were more than that in the non-radioactive resin-glass matrix (HG-3-IEX-500). The study demonstrates comprehensive experimental and analytical works and shows that it is possible to minimise the volume of the waste while keeping the required safety levels, however further research needs to be carried out in this area.

Optimizing the Synthesis of Ethyl tert-Butyl Ether in Continuous Catalytic Distillation Column Using New Ion Exchange Resin Catalyst

Liquid phase synthesis of one of the important fuel oxygenate, ethyl tert-butyl ether （ETBE）, from etha-nol and tert-butyl alcohol （TBA） has been studied in catalytic distillation column （CDC） using ion exchange resin catalyst CT-145H. A packed CDC of 1.2 m height and 50 mm diameter with indigenously developed reactive sec-tion packing was used to generate experimental data. Effect of different key variables on product purity in distillate, was investigated to find the optimum operating conditions for ETBE synthesis. The optimum conditions for 0.2 kg·s-1 of ethanol feed were found：reboiler duty of 375 W, molar feed ratio of 1︰1.3 of reactants, and reflux ratio of 7. Concentration profiles for each component along each column section at optimum conditions were also drawn. Neither output nor input multiplicity was observed at experimental conditions.

Behaviour of radioactive iodide and bromide ions from aqueous solution on ion exchange resins Amberlite IRA-400

The ion exchange resin Amberlite IRA-400 in iodide and bromide form where equilibrated separately with the respective labeled iodide and bromide ion solution of different concen-trations varying from 0.005M to 0.100M in the temperature range of 32.0 oC to 48.0 oC. The dis-tribution coefficient Kd values calculated for iodide and bromide ion exchange increases with rise in ionic concentration of the external solution, however with rise in temperature the Kd values calculated where found to decrease. Also the Kd values calculated where higher for iodide exchange than bromide exchange. Among the different alternative techniques available for obtaining the Kd values, the radio-active tracer technique used in the present ex-perimental work offers high detection sensitivity. It is expected that the distribution coefficient data obtained from such experimental work will significant in environmental impact assessment on the disposal of radioactive waste.

17α-Ethinylestradiol removal from water by magnetic ion exchange resin

Magnetic ion exchange(MIEX) resins have received considerable attention in drinking water treatment due to their fast and efficient removal of dissolved organic carbon(DOC). Two types of mechanisms, i.e., ion exchange,reversible and irreversible adsorption, may occur during pollutants removal by MIEX. This work examined the removal mechanism of 17α-Ethinylestradiol(EE2) by MIEX. As one of typical estrogen micro-pollutants,EE2 existed as neutral molecule in natural water, and its charge density was close to zero [(0.00000219 ±0.00000015) meq·(μg EE2)^(-1)] based on the potentiometric titration method. However, the removal of EE2 by MIEX was much higher than that of other micro-pollutants previously reported. Multi-cycle adsorptionregeneration experiments and ion exchange stoichiometry analysis were conducted to elucidate the removal mechanism of EE2 by MIEX resin. The results suggested that the main removal mechanism of EE2 by MIEX was ion exchange instead of reversible micro-pore adsorption. The experimental analysis based on Donnan theory indicated that the internal micro-environment of resin beads was alkaline, in the alkaline environment EE2 would be ionized into negatively charged groups. As a result, ion exchange reaction occurred inside the pore of MIEX resin, and the removal process of EE2 by MIEX was dominated by the ion exchange reaction.

Ion Exchange Adsorption Kinetics of Miglitol by D001 Resins

In order to explore internal factors for adsorption kinetic effect of miglitol by D001 resin, a batch adsorption operation for miglitol kinetic adsorption at different concentrations, temperatures and vibrating rates was investigated in oscillator (SHZ-A), respectively. The different kinetic mathematical model, Webber-Morris kinetic equation, film diffusion coefficient equation and kinetic boundary model were all applied to discuss the adsorption process. The results showed that Type 1 pseudo-second order kinetic equation can be all used to describe miglitol adsorbed by D001 resin at different concentrations, temperatures and vibrating rates. Moreover, the total activation energy (Ea) can be calculated and its value is 9.7 kJ/mol, and then calculated values of the process film diffusion coefficient and pore diffusion coefficient, it may be inferred from these gotten values that the ion exchange process is all mainly controlled by film diffusion. Therefore, the results also suggest that the external adsorption factors such as solute concentration, temperature and vibrating rate for effect of mass transfer diffusion process control of miglitol onto D001 resin are relatively weak.

ELECTRIC REGENERATION METHOD OF IONEXCHANGE RESIN IN THE MIXED BED

In this paper the self-regeneration process of the mixed resins consisting of cationand anion ion exchangers in the electrolialyser of the packed bed is analyzed and anelectric regeneration method is put forward to supply the desalinated water by mixedbed The electric regeneration technology is a new one used for regeneration of theexhausted ion exchangers in the mixed bed instead of the traditional regeneratingprocess by using acid and abc liquor Electric energy is consumed to regenerat theion exchangers loaded by salts from water treatment without any chemicals- acid alkali. The advantage of the electric regeneration process edibited convenientoperation, no discharge any waste, and therefore no Polluted to the recehang waterbode and the environmental ground

ADSORPTION OF HUMIC SUBSTANCES BY MACRO WEAKLY BASIC IONEXCHANGE RESIN AND THEIR EFFECTS ON REMOVAL OF Cu^(2+) AND Pb^(2+)

Adsorption of humic, tannic and gallic acids by a macro weakly basic ion-exchange resin JN-01 was studied. The adsorption capacity of this resin for gallic and tannic acids is much higher than that for humic acid, which can be explained on the basis of both their molecular size and ionization degree. Furthermore, humic acid is separated into different components with molecular weight in the range from 2000 Da to 100000 Da by ultra-filter, and their adsorption isotherms on resin JN-01 indicate that humic acid＇s molecular weight is an important factor which makes significant influence on adsorption. Finally, changes in the amount of Cu^2＋ and Pb^2＋ adsorbed on resin JN-01 as a function of the concentration of each of these three acids were studied. A large increase in the heavy metal ions uptake is observed in the presence of humic substance, such advantages are due to the interactions between the heavy metal ions and the unbound functional groups of the adsorbed organic acids.

Elements, Structure and Electrochemical Property of Carbon Derived from La^(3+) Adulterating Polystyrene Cation Exchange Resin

The polystyrene cation exchange resin was exchanged by La 3+ and then were carbonized to make resin carbon material. The electrochemical properties of the resin carbon material as the electrode of the lithium ion cell were investigated. The test results show that comparing with the polystyrene cation exchange resin without adulterating, the contents of hydrogen, oxygen and sulfur are changed obviously for the resin carbon material derived from the La 3+ adulterating polystyrene cation exchange resin. The contents of hydrogen and oxygen are increased, and the one of sulfur is decreased. The test results also indicate that it is more easily to form the stratum graphite minicrystal structure with bigger diameter for the La 3+ adulterating resin. According to the electrochemical test results, the electrode derived from La 3+ adulterating polystyrene cation exchange resin has much better electrochemical property, and the capacity of charge and discharge of the electrode is increased about 30 mAh·g -1 in average.

Cleaning the Ion Exchange Resin Sorption of Uranium from Silicic Acid Solution ＂Ayanat＂

The authors discovered a new way to clean the ion exchange resin sorption of uranium from silicic acid used solution ＂Ayanat＂. The method reduces the costs of regeneration of ion exchange resin and its reuse in the sorption of uranium.

Adsorption of Copper from an Ammonia-Thiosulfate Media Using DOWEX 550A Ion Exchange Resin

The study of copper adsorption onto ion exchange resins of anionic type is part of the gold recovery from ammonia-thiosulfate solutions, where copper is the main impurity of the system because it acts as a catalyst of gold dissolution reaction. A study is made of the adsorption and desorption of copper in the form of the complex in an ammonia-thiosulfate media on an ion exchange resin, DOWEX 550A, classified as a strong base, which in its inner structure has a quaternary amine functional group. In the studied pH range copper adsorption increased with increasing pH, while the presence of thiosulfate decreased it, the same as the ammonia content, due to the greater presence of cuprotetramine, . Elution of the copper complexes from the resin was more efficient with sulfite than with perchlorate.

INTERACTION MECHANISM OF ORGANIC MATTER WITH GEL TYPE POLYSTYRENE STRONGLY BASIC ANION EXCHANGE RESIN AND REGENERATION OF THE ORGANISM FOULED RESIN Ⅰ.The interreaction mechanism between strongly basic anion exchange resin and organic matter

It was generally considered that contamination of the gel type polystyrenestrong basic anion exchange resin by organic matter in natural water is the result ofion exchange and Van der waal's adsorption on it. On the basis of laboratory and industrial experiments, this paper confirmed that the interreaction between organicmatter and resin polymer matrix is primarily controled by a Van der waal's adsorption.

Elution Behaviour of Monocarboxylic Acids on a Cation-exchange Resin Column

The retention mechanism of monocarboxylic acids on a cation-exchange resin column was investigated. It was assumed that both Donnan membrane equilibrium and adsorption equilibrium were involved in the chromatographic process. On the basis of the proposed mechanism, an equation was derived for correlating distribution coefficient, Kd, dissociation constant, Aa, and adsorption equilibrium constant, K, of the analyzed acid. By this approach, retention data for some aliphatic acids under different operating conditions were predicted. Results are reasonably in agreement with experiment.

A Novel Process Using Ion Exchange Resins for the Coproduction of Ethyl and Butyl Acetates

Before proposing an innovative process for the coproduction of ethyl and butyl acetates, the individual syntheses of ethyl acetate and butyl acetate by two different routes were first studied. These syntheses involved the reaction of ethanol or n-butanol with acetic acid or acetic anhydride in the presence of ion exchange resins: Amberlyst 15, Amberlyst 16, Amberlyst 36 and Dowex 50WX8. Kinetic and thermodynamic studies were performed with all resins. The lowest activation energy (Ea) value was obtained with Dowex 50WX8, which was identified as the best-performing resin, able to be reused at least in four runs without regeneration. The presence of water-azeotropes during the synthesis of ethyl acetate makes its purification difficult. A new strategy was adopted here, involving the use of ethanol and acetic anhydride as the starting material. In order to minimize acetic acid as co-product of this reaction, a novel two-step process for the coproduction of ethyl and butyl acetates was developed. The first step involves the production of ethyl acetate and its purification. Butyl acetate was produced in the second step: n-butanol was added to the mixture of acetic acid and the resin remaining after the first-step distillation. This process yields ethyl acetate and butyl acetate at high purity and shows an environmental benefit over the independent syntheses by green metrics calculation and life cycle assessment.