Nitriding is employed for the hard Fe electrodeposition to produce a hard-facing and antiwear coating. It only takes 1 h for the hard Fe coating, which is much shorter than nitriding the Fe and steel. The results show...Nitriding is employed for the hard Fe electrodeposition to produce a hard-facing and antiwear coating. It only takes 1 h for the hard Fe coating, which is much shorter than nitriding the Fe and steel. The results showed that the nitriding can increase the microhardness, wear resistance of the coating, as well as the bonding strength of the coating with the substrate. Additionally it can eliminate the brittleness, turn the internal stress of the coating from tension to compression. The wear resistance of the nitrided Fe coating is 4.6 times as high as that of Cr coating. It is simple and economic to combine hard Fe electroplating and nitriding, which is a good technology of the tribological surface modification.展开更多
The corneal endothelium of 38 contact lens wearers(74 eyes) and 74 normal eyes for control was photographed and analyzed with specular microscopy and the graphic processing system.The central corneal sensitivity and t...The corneal endothelium of 38 contact lens wearers(74 eyes) and 74 normal eyes for control was photographed and analyzed with specular microscopy and the graphic processing system.The central corneal sensitivity and thickness were also measured.The results showed that the frequency展开更多
According to National Garment Standardization Technology Committee,three children’s wear standards are going into effect by August 1<sup>st</sup>.Those three standards are as following:Safety Requirementf...According to National Garment Standardization Technology Committee,three children’s wear standards are going into effect by August 1<sup>st</sup>.Those three standards are as following:Safety Requirementfor Rope&Drawstring on Children’s Wear,Safety Requirement forDrawstring on Children’s Upper Outer Garment。展开更多
文摘Nitriding is employed for the hard Fe electrodeposition to produce a hard-facing and antiwear coating. It only takes 1 h for the hard Fe coating, which is much shorter than nitriding the Fe and steel. The results showed that the nitriding can increase the microhardness, wear resistance of the coating, as well as the bonding strength of the coating with the substrate. Additionally it can eliminate the brittleness, turn the internal stress of the coating from tension to compression. The wear resistance of the nitrided Fe coating is 4.6 times as high as that of Cr coating. It is simple and economic to combine hard Fe electroplating and nitriding, which is a good technology of the tribological surface modification.
文摘The corneal endothelium of 38 contact lens wearers(74 eyes) and 74 normal eyes for control was photographed and analyzed with specular microscopy and the graphic processing system.The central corneal sensitivity and thickness were also measured.The results showed that the frequency
文摘According to National Garment Standardization Technology Committee,three children’s wear standards are going into effect by August 1<sup>st</sup>.Those three standards are as following:Safety Requirementfor Rope&Drawstring on Children’s Wear,Safety Requirement forDrawstring on Children’s Upper Outer Garment。