Study on the Genetics and Development of Fiber Pigments and Color Deviation After Wetting Process of Naturally Colored Cotton

The genetic control of fiber pigment color in naturally colored cotton was studied. The expression of brown and green fiber color was controlled by incompletely dominant single genes and incompletely dominant major genes, respectively. Production and accumulation of the fiber pigment were related to special expression of enzymatic genes for pigment synthesis in fiber cells. At the stage of fiber lengthening, naturally colored cotton, like white cotton, appeared purely white. But when fiber cell walls entered the thickening stage, pigment appeared by degrees. When the fiber was completely matured (on boll dehiscence), the color reached its darkest level. After wetting process treatment, the hues of the fiber pigment changed in regular patterns. The hue circle for brown and green cotton changed in the opposite direction with wetting process treatment. In general, the treated cotton color and luster became dark and vivid, and this trend provided the possibility for enhancing the fiber quality by suitable environmental friendly finishing. The analysis showed that the color and luster of the cotton may be controlled by a series of pigments which show different chemical performance.

Simulation of Wetting and Drying Processes in A Depth Integrated Shallow Water Flow Model by Slot Method

A particular porosity method named ＂slot method＂ is implemented in a depth-integrated shallow water flow model （DIVAST） to simulate wetting and drying processes. Discussed is the relationship between the shape factors of the ＂slot＂ and the preset depth used in ＂wetting-drying＂ algorithm. Two typical tests are conducted to examine the performance of the method with the effect of the shape factors of the ＂slot＂ being checked in detail in the first test. Numerical results demonstrate that： 1 ） no additional effort to improve the finite difference scheme is needed to implement ＂slot method＂ in DIVAST, and 2） ＂slot method＂ will simulate wetting and diying processes correctly if the shape factors of the ＂slot＂ being selected properly.

Optimization of Wickerhamomyces anomalus Fermentation Conditions for Pectinase Production Based on Wet Processing of Arabica Coffee in Yunnan Province

In order to improve the pectin-degrading efficiency in wet processing of Arabica coffee in Yunnan, Box-Behnken design and single factor experiment were used to optimize the fermentation conditions of five pectinolytic Wickerhamomyces anomalus strains from the fermentation broth of Arabica coffee in Baoshan, Yunnan during wet processing with pectase activity as an indicator. The results showed that the five strains all synthesized pectin lyase(PL), polygalacturonase(PG), and pectin methylesterase(PM).Among them, strain CAP5 had strong ability to produce PG and PL,while strain CAP4 secreted a large amount of PM. Under optimized conditions, the activity of PG, PL, and PM of the five strains came in at 250.17~411.20 U/mL, 12.98~16.55 U/mL, and 208.52~322.83 U/mL,respectively. The four factors of nitrogen source concentration,fermentation time, Mn2+ concentration, and pH value were optimized and the optimal pectinase-producing fermentation conditions for five strains were as follows: peptone 2.2 g/L, fermentation time 30 h, Mn2+ 1.5 mmol/L, and pH 4.3. After fermentation under the optimized conditions, the maximum PG activity of CAP5 amounted to 411.20 U/mL, 114.03% higher than that before optimization.Meanwhile, the PG activity of strains CAP3, CAP4, CAP8, and CAP10 increased by 86.74%, 114.55%, 65.79%, and 66.07%,respectively, and the activity of PL and PM of the five strains rose 150.35%~218.56% and 341.07%~418.52%, respectively. These findings suggested that W. anomalus strains could be used as coffee starter and had great potential for the lysis of pectin.

Characteristics of coal sludge slurry prepared by a wet-grinding process

Coal sludge slurry(CSS) is an alternative fuel and a potential competitive method for sludge reduction.Based on the researches of coal water slurry, we studied CSSs by using a wet-grinding process with different types of regional municipal sludge(sludge) in an orthogonal experiment. The sludge type,sludge mixing proportion, dosage of dispersant, and grinding time were tested in this study. The results show that water content and its occurrence characteristics in the sludge have primary hindering influences on slurry ability. The range of fixed-viscosity concentrations with raw wet sludge is from 50.78%to 44.40%(by weight), while the range is from 53.35% to 51.51%(by weight) with dry sludge. All of the CSSs exhibit shear-thinning behaviors with different variation trends, especially the CSSs with more than 15%(by weight) raw wet sludge in it. Adding the same proportion of raw wet sludge increases the thixotropic properties of CSSs and the highest area of thixotropy loop is 3065 Pa/s, while the highest value of dry sludge is 1798 Pa/s. Hydrophilic group plays an important role in adsorbing water and building three-dimension networks with other particles, which is the main reason for CSS properties.Therefore, the mechanism can be used to find the way for making high quality CSS.

Response of Freezing/Thawing Indexes to the Wetting Trend under Warming Climate Conditions over the Qinghai–Tibetan Plateau during 1961–2010:A Numerical Simulation

Since the 1990s,the Qinghai–Tibetan Plateau(QTP)has experienced a strikingly warming and wetter climate that alters the thermal and hydrological properties of frozen ground.A positive correlation between the warming and thermal degradation in permafrost or seasonally frozen ground(SFG)has long been recognized.Still,a predictive relationship between historical wetting under warming climate conditions and frozen ground has not yet been well demonstrated,despite the expectation that it will become even more important because precipitation over the QTP has been projected to increase continuously in the near future.This study investigates the response of the thermal regime to historical wetting in both permafrost and SFG areas and examines their relationships separately using the Community Land Surface Model version 4.5.Results show that wetting before the 1990s across the QTP mainly cooled the permafrost body in the arid and semiarid zones,with significant correlation coefficients of 0.60 and 0.48,respectively.Precipitation increased continually at the rate of 6.16 mm decade–1 in the arid zone after the 1990s but had a contrasting warming effect on permafrost through a significant shortening of the thawing duration within the active layer.However,diminished rainfall in the humid zone after the 1990s also significantly extended the thawing duration of SFG.The relationship between the ground thawing index and precipitation was significantly negatively correlated(−0.75).The dual effects of wetting on the thermal dynamics of the QTP are becoming critical because of the projected increases in future precipitation.

Distribution of REE of Phosphate Concentrate in Wet-Phosphoric Acid Process

There exists the most important REE-bearing phosphorite deposit in Southwest of China. Due to the fact that the REE are present in the form of ions in the lattices of collophanite or carbonatfluorapatite, the REE can be enriched in phosphate concentrate by flotation method. The phosphate concentrate is the main raw materials to produce phosphoric acid, therefore, it is significant to further investigate the distribution rule of REE in wet process. In this paper, the single leaching and recycled leaching technology were carried out to investigate the effect of various parameter conditions on distribution of REE in products. The REE compositions of products were analyzed by Inductively Coupled Plasma Emission Mass Spectrometry (ICP-MS) method. It was found that the acidic value of leaching liquor was the main effect factor on the distribution of REE in products. In single leaching stage, P2O5 concentration of leaching liquor slightly varied from 8% to about 10% when the excessive coefficient of sulphuric acid ranged from 1.03 to 1.05, and the distribution proportions of ∑REO in phosphoric acid solution was lower than 40%. However, in recycled leaching process(the condition similar to practical wet process), with an increase of P2O5 concentration as well as the acidic value of leaching liquor, the distribution proportions of ∑REO in phosphoric acid solution could be decreased to 2.56%. That is to say that under the condition similar to practical wet process, more than 90% of REE of phosphate concentrate became precipitation entering into the phosphogypsum product. This investigation will provide valid reference for reasonably recovering or reserving REE in wet-phosphoric acid process.

PHASE SEPARATION AND MICROVOID FORMATION AT PHASE INTERFACES OF HYDROPHOBIC-HYDROPHILIC POLYMER BLENDS DURING WET PROCESSING

In this paper,morphological structure,thermodynamic compatibility and relationship be-tween porosities and blend ratios of the wet coagulated PU/PVA sheets were studied by meansof observation of scanning electronic micrographies,tests of dynamic mechanical properties,moisture regain and vapor permeability.Furthermore,the formation of microvoids at interfacesof separated phases was discussed and a microvoid formation mechanism at phase interfaces ofhydrophobic-hydrophilic blends was suggested and compared with that ofhydrophobic-hydrophobic blends.

Energy and Cost Analysis of Cement Production Using the Wet and Dry Processes in Nigeria

The study evaluates the energy consumption of both wet and dry processes cement manufacturing plant in Nigeria. Enrgy consumption data collected for the period 2003 to 2011 were used to estimate the energy consumption of the crushing, milling, agitation, burning, grinding and bagging operations. The total energy evaluation was based on the three primary energy sources which include electrical, combustion and human. The total estimated energy intensities were 6545 MJ/ton and 4197 MJ/ton for wet and dry processes respectively. The percentage consumption of energy in each operation is 93.68 and 90.34% (burning), 2.11 and 4.33% (milling), 0.43 and 0.67% (crushing), 1.39 and 0% (agitation), 2.12 and 3.90% (grinding), and 0.27 and 0.75% (bagging) of the total energy inputs for the wet and dry processes respectively. Furthermore, the average total energy cost of production showed that wet process is approximately 40% more cost intensive in cement production than the dry process while at the same time it is cost effective to run production on energy through gas powered plant than the national grid.

Wet Coffee Processing Discharges Affecting Quality of River Water at Kayanza Ecological Zone, Burundi

Wet coffee processing leads to the generation of large volumes of wastewater, whose discharge to the environment leads to pollution of freshwater bodies. Kayanza is a major coffee growing area in Burundi with more than 40 wet coffee processing factories (WCPF) that discharge effluents directly to receiving water bodies without treatment. This study was carried out to assess the effect of coffee wastewater on the physicochemical properties of receiving waterbodies in Kayanza coffee growing ecological zone. Currently, no study has been done to analyze the effluent from the WCPF and assess the level of pollution. This study will therefore provide valuable data on the water pollution from coffee processing plants. Ten (10) rivers in the Kayanza coffee growing zone were studied during the months of April and June, 2020. Water samples were collected upstream (U) and downstream (D) of the effluent discharge points in triplicate. Samples were analyzed for pH, Chemical Oxygen Demand (COD), Biochemical Oxygen Demand (BOD5), Temperature, Salinity, Electrical Conductivity (EC), Total Dissolved Solids (TDS), Dissolved Oxygen (DO), Total Suspended Solids (TSS), Nitrates, Nitrites, Lead (Pb), Copper (Cu), Chlorides and Ammonium ions using standard methods. Physical parameters were analyzed in situ whereas chemical parameters were analyzed in the laboratories in Burundi Institute of Agricultural Sciences (ISABU) and University of Burundi. Data were analyzed using R-studio-1.0.153, GenStat 64-bit Release 14.1 and SSPS. Results on the physicochemical parameters indicated that coffee factory effluent has a polluting potential during coffee processing peak. The concentrations of the physicochemical parameters were significantly (p < 0.05) higher downstream (D) compared to upstream (U) of the river water sampling points. All downstream sites had COD, BOD5, TSS and pH values above allowable limits set by WHO and Burundi. The polluting impact of public wet coffee processing factories was significantly higher than that of private and cooperatives owned factories (p < 0.05). Measures should be taken in order to protect water bodies.

THERMAL PROCESS OF VACUUM FLUXLESS LASER SOLDERING AND ANALYSIS ON SOLDER SPREADING AND WETTING

In order to study the mechanism of vacuum fluxless soldering on the conditions of laser heating, the method of measuring temperature by the thermocouple is used to analyze the spreading and wetting process of both fluxless Sn-Pb solder in the vacuum surroundings and flux Sn-Pb solder on Cu pad. Solder spreading and wetting affected by the soldering thermal process is also discussed according to the thermodynamics principle. Results show that vacuum fluxless soldering demands higher temperature, and the fall of the solder surface tension is the important factor achieving fluxless laser soldering.

Short wet-steam dyeing process of cotton fabrics with reactive dyes

The effects of Reactive Black 5 utilized to cotton fabrics by short wet-steam process on the dyeing properties were investigated. This study will provide a theoretical reference for short wet-steam process of cotton fabrics with bifunctional reactive dyes. The optimal amount of Selilao agent was 20 g/L, while the soaping and rubbing fastness of the dyed cotton fabrics were both reached to 4-5 rating.

Research on the application of the wet scrubber on the BSSF slag processing system at Baosteel

Based on the analysis results of the dust size distribution of flue gas from Baosteel＇s short-flow （BSSF） slag processing system and the mechanism of the wet scrubber,a wet scrubber system was designed and installed in the No. 1 BSSF slag processing system at Baosteel. The results show that the dust removal efficiency of the previous system that had conventional water nozzles was only 69% with a liquid-gas ratio of 0.79 L/m^3 ,while the dust removal efficiency reached 94% when three sets of high-efficiency dual phase spray guns were installed inside both the flue and the chimney. For the latter system,the liquid-gas ratio was 0. 84 L/m^3 ,and the dust concentration in the cleaned emissions reduced to less than 40 mg/m^3.

锌浮渣干湿法处理工艺对比与干法处理工艺关键设备选型及应用

在湿法炼锌的工业生产中,电解阴极锌片在熔锌感应电炉内熔化除杂时产出副产品锌浮渣,锌浮渣中含锌约80%,其中70%以上锌以单质形态存在。本文对比了干法和湿法两种处理工艺的优缺点,重点介绍了干法处理工艺中关键设备选择和能力计算,并结合实际生产情况对投产后的工艺设备进行改进和完善。

湿法热解法制备L-焦谷氨酸的工艺优化研究

采用湿法热解法,以L-谷氨酸为原料,探究L-焦谷氨酸的制备工艺条件。通过单因素和正交试验对反应的条件进行优化,确定了制备L-焦谷氨酸的最佳工艺条件是反应时间4 h、加水量15 g、反应温度150℃,此时所得L-谷氨酸的转化率为97.37%。这种方法是用水作为反应载体,无需催化剂与压力等条件,既节能减排,又产量高,为清洁高效生产L-焦谷氨酸提供了一定的理论指导和实验数据参考。

膨润土矿物选矿提纯方法研究

膨润土是我国的一种优势资源,其主要矿物成分为层状结构的蒙脱石,但天然膨润土中蒙脱石的含量不高,一些低质的膨润土蒙脱石含量仅在50%左右,杂质含量较高,必须经过提纯才能用于开发高端产品。膨润土提纯方法及效果一直是行业急需的技术,但不同的膨润土性能及伴生的杂质不同,提纯方法不同,针对膨润土提纯方法的现状,通过综述回顾膨润土提纯的研究进展,为膨润土提纯在实际生产中应用提供指导。

马铃薯鲜湿面的制备及其品质评价

目的探究不同原料配方对面团混合特性和马铃薯鲜湿面条蒸煮、质构特性的影响,并对鲜湿面配方进行优化。方法在单因素试验中研究马铃薯全粉、芦笋全粉、水、谷朊粉、魔芋胶添加量对面团混合特性以及鲜湿面的蒸煮特性和质构特性的影响,并通过正交试验确定马铃薯营养鲜湿面制备工艺;此外,比较不同配方制备的鲜湿面的消化特性和血糖生成指数。结果正交试验和验证试验结果表明,马铃薯鲜湿面在水添加量30%,马铃薯全粉添加量6%,芦笋粉添加量4%,魔芋胶添加量0.8%或0.4%时,面条的蒸煮特性和质构特性无显著差异(P>0.05),都可用于鲜湿面的制备;对比不同配方制备鲜湿面的拉伸强度、蒸煮断条率无显著差异(P>0.05),不同方法制备鲜湿面血糖生成指数均大于80,都属于高生糖指数食品。结论通过工艺优化确定了马铃薯鲜湿面最优配方,在此配方下制备的面条具有良好的蒸煮特性和质构特性,本研究可为生产马铃薯鲜湿面提供理论依据。

赤泥中稀土提取与分离技术研究进展

稀土元素被誉为“工业维生素”,具有优异的磁、光、电性能。随着新能源汽车等新兴行业对稀土需求量的不断增加,稀土资源日益紧缺,从二次资源中回收稀土已成大势所趋。作为一种重要的二次资源,赤泥的产量高、堆存量大、稀土含量较高。本文介绍了赤泥中稀土元素的赋存状态,概述了从赤泥中提取分离稀土元素的湿法浸出工艺和火法-湿法联合工艺;介绍了溶剂萃取法和离子交换法两种分离工艺的研究现状,对比分析了不同处理工艺的优缺点,并通过比较不同工艺的优劣,指出降低回收成本、提高环境效益是未来赤泥资源化利用研究的重要方向。

基于正交设计的鞋面革湿态染整工艺设计与优化

应用正交设计方法,以坯革收缩温度、废液铬含量、坯革增厚率、撕裂力、柔软度、得革率为考察指标,对牛鞋面革湿态染整工艺的复鞣、填充、加脂工序进行设计与优化。试验结果表明,复鞣最佳工艺为醛酸复鞣剂用量6%,转动时间60 min,铬鞣剂用量4%,转动时间90 min;填充最佳工艺为丙烯酸树脂用量4%,氨基树脂用量6%,合成鞣剂用量8%,植物栲胶用量4%;加脂最佳工艺为合成油用量6%,牛蹄油用量3%,卵磷脂用量4%,合成酯用量3%;最佳工艺集成后所制得的鞋面革性能满足QB/T 1873—2010的要求。

锌湿法冶炼渣污染物及综合利用研究

锌湿法冶炼是一种常用的锌冶炼工艺,它在生产过程中会产生大量的渣污染物。这些渣污染物主要包含氧化锌、氧化铁、浸出渣、净化渣等。由于这些渣含有大量有价值的金属元素和资源,对其进行综合利用具有重要意义。本文通过详细分析渣污染物形成过程、组成及含量,介绍常用的渣污染物处理方法,探讨综合利用渣污染物的技术方法,能为相关领域提供参考,并促进该领域技术与应用的进一步发展。

涂装漆雾治理干湿法分离技术试验对比

[目的]漆雾作为涂装作业产生的主要污染物之一,其治理效果是影响其他污染物治理成败的关键。常见的治理方式主要有干法和湿法两类,但同一工况下的对比研究鲜有报道。[方法]以喷涂车间产生的漆雾为治理目标,分别以干法工艺(球滤与玻璃纤维棉过滤相结合)和湿法工艺(水旋分离)进行漆雾治理试验研究。[结果]干法工艺去除漆雾的平均效率达到95%,湿法工艺则达到98%。湿法工艺较干法工艺有更低的排放浓度和更稳定的表现,但两者均出现了漆雾附着在设备内壁的情况。[结论]在工程应用中,应根据项目的具体情况来选择合适的漆雾治理工艺。