Asymmetric Drying and Wetting Trends in Eastern and Western China

As an important factor that directly affects agricultural production, the social economy, and policy implementation,observed changes in dry/wet conditions have become a matter of widespread concern. However, previous research has mainly focused on the long-term linear changes of dry/wet conditions, while the detection and evolution of the non-linear trends related to dry/wet changes have received less attention. The non-linear trends of the annual aridity index, obtained by the Ensemble Empirical Mode Decomposition(EEMD) method, reveal that changes in dry/wet conditions in China are asymmetric and can be characterized by contrasting features in both time and space in China. Spatially, most areas in western China have experienced transitions from drying to wetting, while opposite changes have occurred in most areas of eastern China. Temporally, the transitions occurred earlier in western China compared to eastern China. Research into the asymmetric spatial characteristics of dry/wet conditions compensates for the inadequacies of previous studies, which focused solely on temporal evolution;at the same time, it remedies the inadequacies of traditional research on linear trends over centennial timescales. Analyzing the non-linear trend also provides for a more comprehensive understanding of the drying/wetting changes in China.

Reservoir quality evaluation of the Narimba Formation in Bass Basin,Australia:Implications from petrophysical analysis,sedimentological features,capillary pressure and wetting fluid saturation

The evaluation of reservoir quality was accomplished on the Late Paleocene to Early Eocene Narimba Formation in Bass Basin,Australia.This study involved combination methods such as petrophysical analysis,petrography and sedimentological studies,reservoir quality and fluid flow units from derivative parameters,and capillary pressure and wetting fluid saturation relationship.Textural and diagenetic features are affecting the reservoir quality.Cementation,compaction,and presence of clay minerals such as kaolinite are found to reduce the quality while dissolution and secondary porosity are noticed to improve it.It is believed that the Narimba Formation is a potential reservoir with a wide range of porosity and permeability.Porosity ranges from 3.1%to 25.4%with a mean of 15.84%,while permeability ranges between 0.01 mD and 510 mD,with a mean of 31.05 mD.Based on the heterogenous lithology,the formation has been categorized into five groups based on permeability variations.Group I showed an excellent to good quality reservoir with coarse grains.The impacts of both textural and diagenetic features improve the reservoir and producing higher reservoir quality index(RQI)and flow zone indicators(FZI)as well as mostly mega pores.The non-wetting fluid migration has the higher possibility to flow in the formation while displacement pressure recorded as zero.Group II showed a fair quality reservoir with lower petrophysical properties in macro pores.The irreducible water saturation is increasing while the textural and digenetic properties are still enhancing the reservoir quality.Group III reflects lower quality reservoir with mostly macro pores and higher displacement pressure.It may indicate smaller grain size and increasing amount of cement and clay minerals.Group IV,and V are interpreted as a poor-quality reservoir that has lower RQI and FZI.The textural and digenetic features are negatively affecting the reservoir and are leading to smaller pore size and pore throat radii(r35)values to be within the range of macro,meso-,micro-,and nano pores.The capillary displacement pressure curves of the three groups show increases reaching the maximum value of 400 psia in group V.Agreement with the classification of permeability,r35 values,and pore type can be used in identifying the quality of reservoir.

Extended wet sieving method for determination of complete particle size distribution of general soils

The traditional standard wet sieving method uses steel sieves with aperture?0.063 mm and can only determine the particle size distribution(PSD)of gravel and sand in general soil.This paper extends the traditional method and presents an extended wet sieving method.The extended method uses both the steel sieves and the nylon filter cloth sieves.The apertures of the cloth sieves are smaller than 0.063 mm and equal 0.048 mm,0.038 mm,0.014 mm,0.012 mm,0.0063 mm,0.004 mm,0.003 mm,0.002 mm,and 0.001 mm,respectively.The extended method uses five steps to separate the general soil into many material sub-groups of gravel,sand,silt and clay with known particle size ranges.The complete PSD of the general soil is then calculated from the dry masses of the individual material sub-groups.The extended method is demonstrated with a general soil of completely decomposed granite(CDG)in Hong Kong,China.The silt and clay materials with different particle size ranges are further examined,checked and verified using stereomicroscopic observation,physical and chemical property tests.The results further confirm the correctness of the extended wet sieving method.

Bioinspired directional structures for inhibiting wetting on super-melt-philic surfaces above 1200°C

Over the past two decades,superhydrophobic surfaces that are easily created have aroused considerable attention for their superior performances in various applications at room temperature.Nowadays,there is a growing demand in special fields for the development of surfaces that can resist wetting by high-temperature molten droplets(>1200°C)using facile design and fabrication strategies.Herein,bioinspired directional structures(BDSs)were prepared on Y2O3-stabilized ZrO2(YSZ)surfaces using femtosecond laser ablation.Benefiting from the anisotropic energy barriers,the BDSs featured with no additional modifiers showed a remarkable increase from 9.2°to 60°in the contact angle of CaO–MgO–Al2O3–SiO2(CMAS)melt and a 70.1%reduction in the spreading area of CMAS at 1250°C,compared with polished super-CMAS-melt-philic YSZ surfaces.Moreover,the BDSs demonstrated exceptional wetting inhibition even at 1400°C,with an increase from 3.3°to 31.3°in contact angle and a 67.9%decrease in spreading area.This work provides valuable insight and a facile preparation strategy for effectively inhibiting the wetting of molten droplets on super-melt-philic surfaces at extremely high temperatures.

Decadal Changes in Dry and Wet Heatwaves in Eastern China:Spatial Patterns and Risk Assessment

Under global warming,understanding the long-term variation in different types of heatwaves is vital for China’s preparedness against escalating heat stress.This study investigates dry and wet heatwave shifts in eastern China over recent decades.Spatial trend analysis displays pronounced warming in inland midlatitudes and the Yangtze River Valley,with increased humidity in coastal regions.EOF results indicate intensifying dry heatwaves in northern China,while the Yangtze River Valley sees more frequent dry heatwaves.On the other hand,Indochina and regions north of 25°N also experience intensified wet heatwaves,corresponding to regional humidity increases.Composite analysis is conducted based on different situations:strong,frequent dry or wet heatwaves.Strong dry heatwaves are influenced by anticyclonic circulations over northern China,accompanied by warming SST anomalies around the coastal midlatitudes of the western North Pacific(WNP).Frequent dry heatwaves are related to strong subsidence along with a strengthened subtropical high over the WNP.Strong and frequent wet heatwaves show an intensified Okhotsk high at higher latitudes in the lower troposphere,and a negative circumglobal teleconnection wave train pattern in the upper troposphere.Decaying El Niño SST patterns are observed in two kinds of wet heatwave and frequent dry heatwave years.Risk analysis indicates that El Niño events heighten the likelihood of these heatwaves in regions most at risk.As global warming continues,adapting and implementing mitigation strategies toward extreme heatwaves becomes crucial,especially for the aforementioned regions under significant heat stress.

Preparation of PrFe_(x)Co_(1-x)O_(3)/Mt catalyst and study on degradation of 2-hydroxybenzoic acid wastewater by catalytic wet peroxide oxidation

In this study,the perovskite nanocomposite PrFe_(x)Co_(1-x)O_(3)(Pr(S))was successfully synthesized by the sol-gel method;PrFe_(x)Co_(1-x)O_(3)/Al-pillared montmorillonite(Pr(S)/Mt)catalysts were prepared by impregnation(D)method and solid-melting(G)method,respectively,with Pr(S)as the active component and Al-pillared montmorillonite as the carrier.The catalysts were applied to treat the 2-hydroxybenzoic acid(2-HA)-simulated wastewater by catalytic wet peroxide oxidation(CWPO)technique,and the chemical oxygen demand(COD)removal rate and the 2-HA degradation rate were used as indicators to evaluate the catalytic performance.The results of the experiment indicated that the solid-melting method was more conducive to preparing the catalyst when the Co/Fe molar ratio of 7:3 and the optimal structural properties of the catalysts were achieved.The influence of operating parameters,including reaction temperature,catalyst dosage,H_(2)O_(2)dosage,pH,and initial 2-HA concentration,were optimized for the degradation of 2-HA by CWPO.The results showed that 97.64%of 2-HA degradation and 75.23%of COD removal rate were achieved under more suitable experimental conditions.In addition,after the catalyst was used five times,the degradation rate of 2-HA could still reach 76.93%,which implied the high stability and reusability of the catalyst.The high catalytic activity of the catalyst was due to the doping of Co into PrFeO_(3),which could promote the generation of HO·,and the high stability could be attributed to the loading of Pr(S)onto Al-Mt,which reduced the leaching of reactive metals.The study of reaction mechanism and kinetics showed that the whole degradation process conformed to the pseudo-firstorder kinetic equation,and the Langmuir-Hinshelwood method was applied to demonstrate that catalysis was dominant in the degradation process.

Influence of the boundary effect on the mechanical response test of pavement cushion under the wetting effect of silt

Through a self-developed model test system,the mechanical properties of silt and the deformation characteristics of airport runways were investigated during the period of subgrade wetting.Based on the test results,the reliability of the numerical simulation results was verified.Numerical models with different sizes were established.Under the same cushion parameter and loading width ranges,the effects of the cushion parameters and loading conditions on the mechanical responses of the cushion before and after subgrade wetting were analyzed.The results show that the internal friction angles of silt with different wetting degrees are approximately 34°.The cohesion is from 8 to 44 kPa,and the elastic modulus is from 15 to 34 MPa.Before and after subgrade wetting,the variation rates of the cushion horizontal tensile stresses with the same cushion parameters and loading width ranges are different under the influence of boundary effects.After subgrade wetting,the difference in the variation rates of the cushion horizontal tensile stresses under the same cushion parameter range decreases compared with that before subgrade wetting;however,this difference increases under the same loading width range.Before and after subgrade wetting,the influence of the boundary effect on the mechanical response evaluation of the cushion is not beneficial for optimizing the pavement design parameters.When the cushion thickness is more than 0.25 m,the influence of the boundary effect can be disregarded.

Wetting alternating with partial drying during grain filling increases lysine biosynthesis in inferior rice grain

Lysine content is a criterion of the nutritional quality of rice.Understanding the process of lysine biosynthesis in early-flowering superior grain(SG)and late-flowering inferior grain(IG)of rice would advance breeding and cultivation to improve nutritional quality.However,little information is available on differences in lysine anabolism between SG and IG and the underlying mechanism,and whether and how irrigation regimes affect lysine anabolism in these grains.A japonica rice cultivar was grown in the field and two irrigation regimes,continuous flooding(CF)and wetting alternating with partial drying(WAPD),were imposed from heading to the mature stage.Lysine content and activities of key enzymes of lysine biosynthesis,and levels of brassinosteroids(BRs)were lower in the IG than in the SG at the early grainfilling stage but higher at middle and late grain-filling stages.WAPD increased activities of these key enzymes,BR levels,and contents of lysine and total amino acids in IG,but not SG relative to CF.Application of 2,4-epibrassinolide to rice panicles in CF during early grain filling reproduced the effects of WAPD,but neither treatment altered the activities of enzymes responsible for lysine catabolism in either SG or IG.WAPD and elevated BR levels during grain filling increased lysine biosynthesis in IG.Improvement in lysine biosynthesis in rice should focus on IG.

Characteristics and Mechanisms of Persistent Wet–Cold Events with Different Cold-air Paths in South China

We investigate the characteristics and mechanisms of persistent wet–cold events(PWCEs)with different types of coldair paths.Results show that the cumulative single-station frequency of the PWCEs in the western part of South China is higher than that in the eastern part.The pattern of single-station frequency of the PWCEs are“Yangtze River(YR)uniform”and“east–west inverse”.The YR uniform pattern is the dominant mode,so we focus on this pattern.The cold-air paths for PWCEs of the YR uniform pattern are divided into three types—namely,the west,northwest and north types—among which the west type accounts for the largest proportion.The differences in atmospheric circulation of the PWCEs under the three types of paths are obvious.The thermal inversion layer in the lower troposphere is favorable for precipitation during the PWCEs.The positive water vapor budget for the three types of PWCEs mainly appears at the southern boundary.

Grassland-type ecosystem stability in China differs under the influence of drought and wet events

Ecological stability is a core issue in ecological research and holds significant implications forhumanity. The increased frequency and intensity of drought and wet climate events resulting from climatechange pose a major threat to global ecological stability. Variations in stability among different ecosystemshave been confirmed, but it remains unclear whether there are differences in stability within the sameterrestrial vegetation ecosystem under the influence of climate events in different directions and intensities.China's grassland ecosystem includes most grassland types and is a good choice for studying this issue.This study used the Standardized Precipitation Evapotranspiration Index-12 (SPEI-12) to identify thedirections and intensities of different types of climate events, and based on Normalized DifferenceVegetation Index (NDVI), calculated the resistance and resilience of different grassland types for 30consecutive years from 1990 to 2019 (resistance and resilience are important indicators to measurestability). Based on a traditional regression model, standardized methods were integrated to analyze theimpacts of the intensity and duration of drought and wet events on vegetation stability. The resultsshowed that meadow steppe exhibited the highest stability, while alpine steppe and desert steppe had thelowest overall stability. The stability of typical steppe, alpine meadow, temperate meadow was at anintermediate level. Regarding the impact of the duration and intensity of climate events on vegetationecosystem stability for the same grassland type, the resilience of desert steppe during drought was mainlyaffected by the duration. In contrast, the impact of intensity was not significant. However, alpine steppewas mainly affected by intensity in wet environments, and duration had no significant impact. Ourconclusions can provide decision support for the future grassland ecosystem governance.

Preparation of Regenerated Silk Fibroin Hybrid Fibers with Hydrogen Peroxide Sensing Properties by Wet Spinning

Silk is widely used in the production of high-quality textiles.At the same time,the amount of silk textiles no longer in use and discarded is increasing,resulting in significant waste and pollution.This issue is of great concern in many countries where silk is used.Hydrogen peroxide as a naturally occurring compound is an important indicator of detection in both biology and the environment.This study aims to develop a composite fiber with hydrogen peroxide-sensing properties using discarded silk materials.To achieve this goal,firstly,polydopamine(PDA)was used to encapsulate the ZnFe_(2)O_(4) NPs to achieve the improvement of dispersion,and then regenerated silk fibroin(RSF)and PDA@ZnFe_(2)O_(4)/RSF hybrid fibers are prepared by wet spinning.Research has shown that PDA@ZnFe_(2)O_(4)/RSF demonstrates exceptional sensitivity,selectivity,and stability in detecting hydrogen peroxide,while maintaining high mechanical strength.Furthermore,the complete hybridization of PDA@ZnFe_(2)O_(4) with silk fibroin not only results in the combination of the durability of silk fibroin and PDA@ZnFe_(2)O_(4)’s rigidity,ensuring a reliable service life,but also makes PDA@ZnFe_(2)O_(4)/RSF exhibit excellent catalytic activity and biocompatibility.Therefore,the composite fiber exhibits exceptional mechanical properties and reliable hydrogen peroxide sensing capabilities,making it a promising material for biological and medical applications.

Wettability of Silica Sol Modified Multi-layer Graphene

To expand the application of multi-layer graphene in water-based systems, modified multi-layer graphene was prepared by vacuum impregnation with silica sol and carbon-embedded heat treatment at 300, 500 or 700 ℃ for 3 h. The phase composition, microstructure and wettability of the modified multi-layer graphene heat treated at different temperatures were studied. The results show that the water wettability of the modified multi-layer graphene is improved after vacuum impregnation with silica sol and carbon-embedded heat treatment;the optimum heat treatment temperature is 300 ℃, and the modified multi-layer graphene has the water wetting angle of 64.7°.

Assessment of the Application of the Integrated Multi-Satellite Retrievals for GPM Satellite Precipitation Products for Extreme Dry and Wet Events Monitoring in Togo (2001-2019)

Togo’s economy is heavily dependent on rainfed agriculture. Therefore, anomalies in precipitation can have a significant impact on crop yields, affecting food production and security. Thus, monitoring anomalous climate conditions in Togo through the combination of precipitation satellite-based data and Standard Precipitation Index (SPI) help anticipate the development of drought scenarios or excessive rainfall, allowing farmers to adjust their strategies and minimize losses. Continuous and adequate spatial monitoring of these climate anomalies provided by satellite-based products can be central to an effective early warning system (EWS) implementation in Togo. Precipitation satellite-based products have been presented invaluable tools for assessing droughts and , offering timely and comprehensive data that supports a wide range of applications. In this study, we applied the Integrated Multi-satellite Retrievals for GPM (IMERG) rainfall product, a unified satellite global precipitation product developed by NASA, to identify and characterize the severity of dry and wet climate events in Togo during the period from 2001 to 2019. The Standard Precipitation Index (SPI), as the main index recommended by the World Meteorological Organization to monitor drought wide world, was selected as the reference index to monitor dry and wet climate events across Togo regions. The results show two distinct major climate periods in Togo in the timeframe analyzed (2001-2019), one dominated by wet events from 2008 to 2010, and a second marked by severe and extreme dry events from 2013 to 2015;MERG rainfall and SPI combination were able to capture these events consistently.

Characteristics of Dry and Wet Climate in Shandong Province Based on Standardized Precipitation Index

Based on the monthly precipitation data of 116 meteorological stations in Shandong Province during 1970-2021,standardized precipitation index(SPI)was calculated,and the methods of linear fitting,mutation test and Morlet wavelet analysis were used to analyze the change trend and temporal and spatial distribution characteristics of SPI index in the past 52 years.The results show that there were more normal years in Shandong Province,and the frequency reached 38.46%.There was severe drought in the 1980s and more wet years after 2003.SPI index showed an upward trend in spring,summer and winter but a weak arid trend in autumn.In addition,intense dry weather was more frequent in summer.Spatially,the climate was normal or humid in most areas of Shandong Province.The regions with more wet years were located in the central and northeast Shandong and the peninsula,while the climate was normal in the southwest and north of Shandong.The areas with more dry years were mainly located in the northwest of Shandong Province.There was mainly local and global drought in Shandong Province,and the arid area showed a decreasing trend.In the past 52 years,Shandong Province experienced quasi-4 times of alternation between dry and wet climate.The long period of 21 a was the first main period,and the climate would be still wet in Shandong Province in the future.In terms of mutation,the climate in Shandong Province became humid after 2003,and 2003 was the mutation point.After the abrupt change,the climate changed from gradually drying to wetting.

Subconjunctival hemorrhage after wet cupping therapy: a case report

Introduction:Cupping therapy is an integrative and complementary medicine therapy that practiced worldwide by several civilizations for thousands of years.Cupping therapy is reported to be a relatively safe practice especially if performed by qualified therapists.Subconjunctival hemorrhage(SCH)is a common cause of eye redness and can be classified into traumatic and spontaneous.Case presentation:This case report discussed an adverse event related to wet cupping therapy.The patient developed SCH one day after performing cupping therapy.He was completely recovered after 2 weeks.This case report should increase the knowledge of cupping therapists regarding increasing safety of patient when performing wet cupping therapy on specific body parts especially,head,neck and cervical areas.Furthermore,it highlighted the importance of conducting research regarding the mechanical and physiological effects of cupping therapy.Conclusion:Adverse events related to cupping therapy should be reported with every patient.Cupping therapists should be aware of this possible mild adverse event.To the best of our knowledge,this is the first published adult case of SCH related to wet cupping therapy session.More studies are critically needed for evaluation of cupping therapy effects and adverse events especially when performed on head and neck.

干湿循环下石灰改良红层泥岩填料力学性能劣化规律研究

红层泥岩水敏性高,作路基填料时可用石灰改良。受季节变化影响,路基基床经历干湿循环,导致服役性能降低。为研究干湿循环下改良填料力学特性劣化规律,开展一系列干湿循环试验、无侧限抗压试验和弯曲元试验测定改良填料无侧限抗压强度和小应变刚度。结合连续滴水扫描电镜(scanning electron microscope,简称SEM)试验,揭示干湿循环后填料微观结构劣化特征。结果表明:低幅度循环下试样在干侧和湿侧均产生体胀。高幅度循环下试样在湿侧产生体胀。在干侧先产生体缩,随循环次数增加,即使含水率较低,试样也产生体胀。体胀导致强度和小应变刚度均有不同程度的劣化。当试样产生体缩时,强度有所增长,但小应变刚度由于裂缝衍生而持续衰减。试样强度随损伤体变可用统一劣化方程表示。但高幅度循环下试样干燥后的小应变刚度远低于劣化线,且劣化速率远大于强度。试样滴水后能维持基本形貌,但观察到团聚体松散、微粒剥落和新生裂缝等结构劣化特征,从而导致宏观力学性能衰减。

低温熔融法制备不溶性硫磺的影响因素研究

为了提高不溶性硫磺(IS)的收率和高温稳定性,在聚合温度为260℃、聚合时间为1 h、固化温度为50℃、固化时间为4 h、采用湿法粉碎的工艺条件下,对低温熔融法制备IS中影响产品收率和高温稳定性的因素进行了研究。结果表明:原料硫磺中烃类化合物、酸性有机物、残留萃取稳定剂等对IS产品收率和高温稳定性的影响很大,为保证IS产品质量,上述杂质在原料中的质量分数均应低于0.02%。原料硫磺中的含水量对IS收率影响较小,但微量水分易造成设备腐蚀从而产生铁锈,铁锈会对IS收率和产品质量造成影响。使用聚合稳定剂和醇类急冷稳定剂可以提高IS产品质量。以水为粉碎介质,采用湿法粉碎工艺时,水中的杂质会降低IS的高温稳定性,因此在粉碎过程应及时补充新鲜去离子水;循环水中存在的CS_(2)会降低IS产品的高温稳定性,采用升温氮气汽提法可以有效去除水中的CS_(2)。

XL-90杨湿心材与对照材物理力学性质分析

为探究湿心材与对照材物理力学性能差异,以13年生南方型黑杨(XL-90杨)为研究对象,分别测定湿心材与对照材的木材密度、干缩率、湿胀性、抗弯强度、抗弯弹性模量、抗压强度及硬度等物理力学指标,对比分析其物理力学性能差异。结果表明:对照材密度(气干、基本、全干)、干缩率(气干、全干)和湿胀性(气干、饱水)均高于湿心材,且对照材和湿心材的径向干缩率、湿胀性均低于弦向,其中对照材的径向、弦向、体积气干干缩率分别较湿心材提高1.123%、2.335%、3.292%,径向、弦向、体积气干湿胀性分别提高0.916%、3.475%、4.221%。对照材的抗弯强度、抗弯弹性模量、顺纹抗压强度及径向、弦向横纹抗压强度分别较湿心材降低5.617、1862.853、8.200、0.496、0.426 MPa,湿心材端面、径面、弦面硬度较对照材分别提高613.333、702.917、692.500 N,且对照材与湿心材的抗弯弹性模量、抗压强度、硬度存在显著或极显著差异。XL-90杨湿心材密度、干缩率和湿胀性等物理性能均低于对照材,而抗弯强度、抗弯弹性模量、抗压强度和硬度等力学性能均高于对照材,该研究结果可为XL-90杨在木材加工利用方面提供应用性指导。

Change in Grain-Size Composition of Lignite under Cyclic Freezing-Thawing and Wetting-Drying

The paper presents the change in grain-size composition of lignite under cyclic freezing-thawing (FTC) and wetting-drying (WDC). The article shows that in the spring and autumn periods the lignites can be subjected to repeated freezing-thawing and wetting-drying, which determines the possibility of changing their grain-size composition and structure. Experimental studies in laboratory conditions on the influence of cyclic freezing-thawing (FTC) and wetting-drying (WDC) on the quality indicators of lignites have been carried out, their granulometric (fractional) composition has been studied. Freezing-thawing cycle conditions are as follows (FTC): minimum exposure temperature: -20°C;maximum: +5°C;relative humidity: 30%;number of processing cycles: 3. Wetting-drying cycles are as follows (WDC): drying temperatures are +20, +40, +60, +80°C, drying time 90 minutes, the coals are further subjected to rain (soaking) for a period of water saturation to humidity of 30% - 40% and dry again. The number of wetting-drying cycles is 3 times. The tests have revealed the destructive effects of FTC and WDC on the samples of lower metamorphic grade coal, and the cycles of wet-dry lead to the much higher yield of fine sizes (-6+0;-13+0 mm) than the cycles of freeze-thaw. Furthermore, it is found that the increase in the yield of fines depends on the heating temperature: coal disintegration proceeds more intensively at a higher temperature of drying.

干湿交替灌溉与植物生长调节剂对水稻光合特性及内源激素的影响

为探明干湿交替灌溉与植物生长调节剂(plant growth regulators, PGRs)对水稻光合特性、内源激素及产量的影响。采用盆栽与大田相结合方式,以龙粳31为试验材料,设置轻干湿交替灌溉(MI)和重干湿交替灌溉(HI)2种灌溉处理,于分蘖盛期和剑叶展叶期喷施已酸二乙氨基乙醇酯(diethylaminoethylcaproate,DA)、6-苄氨基腺嘌呤(6-benzylaminoadenine,BA)和BA(分蘖盛期)+DA(剑叶展叶期)3种PGRs,并设置清水对照,探究干湿交替灌溉、PGRs及互作下干物质积累、光合特性、内源激素及产量差异。结果表明,与HI相比, MI显著增加了抽穗后叶面积、叶面积指数、SPAD值及净光合速率,提高了剑叶与籽粒IAA、GA3和ZR含量,降低了ABA含量,增加了干物质积累及茎鞘物质转运能力,并在改善节间性状基础上增加了结实率、每穗粒数及粒重,增产5.30%(盆栽)和5.11%(大田)。与CK相比,喷施BA+DA显著提高了抽穗后剑叶净光合速率、干物质积累及茎鞘物质转运能力,提高了剑叶与籽粒IAA、GA3和ZR含量,增加了千粒重、结实率、收获指数、每穗粒数和粒重,增产6.60%(盆栽)和6.05%(大田),其次是BA。干湿交替灌溉与PGRs互作对叶面积指数、内源激素含量、每穗粒数及千粒重存在显著影响,其中MI×(BA+DA)处理更有助于维持抽穗后绿叶功能持续期,提高叶片SPAD值、叶面积、叶面积指数和净光合速率,增强干物质积累及茎鞘物质转运能力,提高叶片与籽粒IAA、GA3和ZR含量,促进同化物向籽粒输出,并在稳定穗数基础上增加了千粒重、每穗粒数和粒重,提高了结实率和收获指数,实现产量较其他处理及CK增幅3.17%~12.57%(盆栽)和3.14%~11.55%(大田),而HI×(BA+DA)处理可实现MI×CK产量效果。综上所述,干湿交替灌溉配合喷施BA+DA可作为本区域水稻高产高效生产环节中的一种节水化控栽培组合措施。