We investigated the hydration behavior and some physical/mechanical properties of cement-bonded particleboard （CBPB） containing particles of wheat straw and poplar wood at various usage ratios and bonded with Portla...We investigated the hydration behavior and some physical/mechanical properties of cement-bonded particleboard （CBPB） containing particles of wheat straw and poplar wood at various usage ratios and bonded with Portland cement mixed with different levels of inorganic additives. We determined the setting time and compression strength of cement pastes containing different additives and particles, and studied the effects of these additives and particles on thickness swelling, internal bond strength and modulus of rupture of CBPB by using RSM （Response Surface Methodology）. The mathematical model equations （second-order response functions） were derived to optimize properties of CBPB by computer simulation programming. Predicted values were in agreement with experimental values （R2 values of 0.93, 0.96 and 0.96 for TS, IB and MOR, respectively）. RSM can be efficiently applied to model panel properties. The variables can affect the properties of panels. The cement composites with bending strength 〉 12.5 MPa and internal bond strength 〉 0.28 MPa can be made by using wheat straw as a reinforcing material. Straw particle usage up to 11.5% in the mixture satisfies the minimum requirements of International Standard, EN 312 （2003） for IB and MOR. The dose of 4.95% calcium chloride, by weight of cement, can improve mechanical properties of the panels at the minimum requirement of EN 312. By increasing straw content from 0 to 30%, TS was reduced by increasing straw particle usage up to 1.5% and with 5.54% calcium chloride in the mixture, TS satisfied the EN 312 standard.展开更多
We evaluated the potential use of amino silane coupling agent （SiNH） to improve physical and mechanical properties of UF-bonded wheat straw （Triticurn aestivum L.） poplar wood particleboard. We examined the effect...We evaluated the potential use of amino silane coupling agent （SiNH） to improve physical and mechanical properties of UF-bonded wheat straw （Triticurn aestivum L.） poplar wood particleboard. We examined the effects of varied content of silane coupling agent content and ratios of straw to poplar wood particles on particleboard prop- erties. The ratios of straw to poplar wood particles were 100：0, 85：15, 70：30 and 55：45. Silane coupling agent content was tested at three levels, 0, 5 and 10 %. The experimental panels were tested for their mechanical strength, including modulus of elasticity （MOE）, modulus of rupture （MOR）, intemal bonding （IB） and physical properties according to procedures specified in DIN 68763 （Chipboard for special purposes in building construction： concepts, requirements, testing, 1982-03, 1982）. All board properties were improved by the addition of silane cou- pling agent. The use of poplar wood particles had a positive effect on the mechanical properties of wheat straw parti- cleboard but had a negative effect on physical properties （thickness swelling and water absorption）.展开更多
For manufacturing low-formaldehyde emission particleboard from wheat straw and urea-formaldehyde （UF） resins using urea treatment for indoor environments, we investigated the influence of urea treatment on the forma...For manufacturing low-formaldehyde emission particleboard from wheat straw and urea-formaldehyde （UF） resins using urea treatment for indoor environments, we investigated the influence of urea treatment on the formaldehyde emission, physical and mechanical properties of the manufactured particleboard. Wheat straws were treated at three levels of urea concentration （5%, 10%, 15%） and 95℃ as holding temperature. Wheat straw particleboards were manufactured using hot press at 180℃ and 3 MPa with two types of UF adhesive （UF-45, UF-91）. Then the formaldehyde emission values, physical properties and mechanical properties were considered. The results show that the for- maldehyde emission value was decreased by increasing urea concentration. Furthermore, the results indicate that the specimens under urea treatment have better mechanical and physical properties compared with control specimens. Also specimens under urea treatment at 10% concentration and UF-91 type adhesive have the most optimum physical and mechanical strength.展开更多
We used silane coupling agents to improve the bonding ability between wheat straw particles and UF resin, and investigated surface properties （wettability and surface roughness） and hardness of parti-cleboard made f...We used silane coupling agents to improve the bonding ability between wheat straw particles and UF resin, and investigated surface properties （wettability and surface roughness） and hardness of parti-cleboard made from UF-bonded wheat straw （Triticum aestivum L.） combined with poplar wood as affected by silane coupling agent content and straw/poplar wood particle ratios. We manufactured one-layered particleboard panels at four different ratios of straw to poplar wood par-ticles （0%, 15%, 30% and 45% wheat straw） and silane coupling agent content at three levels of 0, 5% and 10%. Roughness measurements, average roughness （Ra）, mean peak-to-valley height （Rz）, and root mean square roughness （Rq） were measured on unsanded samples by using a fine stylus tracing technique. We obtained contact angle measurements by using a goniometer connected to a digital camera and computer sys-tem. Boards containing greater amounts of poplar particles had superior hardness compared to control samples and had lower wettability. Panels made with higher amounts of silane had lower Rq values.展开更多
Gypsum-bonded particleboard(GBPB) panels were made from various mixtures of particles of bagasse(Saccharum officinarum L.) and wheat straw(Triticum aestivum L.), bonded with different ratios of particle/gypsum. This s...Gypsum-bonded particleboard(GBPB) panels were made from various mixtures of particles of bagasse(Saccharum officinarum L.) and wheat straw(Triticum aestivum L.), bonded with different ratios of particle/gypsum. This study examined the feasibility of bagasse and wheat straw particles in the production of GBPB. One-layer experimental GBPBs with a density of 1.05 or 1.20 g·cm 3were manufactured at different ratios of bagasse/wheat straw, i.e., 100%/0%, 93.75%/6.25%, 87.5%/12.5%, 75%/25%, 50%/50%, 25%/75% and 0%/100% using two particle/ gypsum composite ratios, i.e., 1/2.75 and 1/3.25 by weight. Thickness swelling(TS), water absorption(WA), modulus of rupture(MOR), modulus of elasticity(MOE) and internal bond strength(IB) properties of the boards were evaluated and a statistical analysis was performed in order to examine the possible feasibility of these agricultural residues for use in commercial GBPB manufacturing. We determined that WA of panels decreases as the amount of straw increases to 100% and the LR/G(wood/gypsum) ratio decreases to 1/3.25, whereas the TS of panels decreases as the proportion of straw decreases to 0% and the LR/G ratio increases to 1/2.75. The experimental results also show that the MOR and MOE of panels containing 0%, 6.25% and 12.5% wheat straw with a LR/G ratio of 1/2.75 were higher than those of panels made from 25%–100% wheat straw with a LR/G ratio of 1/2.75, as well as those from all other percentages of straw with a LR/G ratio of 1/3.25. On the other hand, the IB of panels containing more than 12.5% straw with LR/G ratios of 1/2.75 and 1/3.25 were lower than those of panels made from 0–12.5% straw also with both LR/G ratios. Panels consisting of 0%, 6.25% and 12.5% wheat straw with LR/G ratios of 1/2.75 and 1/3.25 met the minimum EN standard requirements of mechanical properties for general purposes. All of the panels containing 0–100% wheat straw with a LR/ G ratio of 1/2.75 or 1/3.25 met the required level of TS for 24-h immersion.展开更多
基金supported by Department of Wood and Paper Science and Technology,University of Zabol
文摘We investigated the hydration behavior and some physical/mechanical properties of cement-bonded particleboard （CBPB） containing particles of wheat straw and poplar wood at various usage ratios and bonded with Portland cement mixed with different levels of inorganic additives. We determined the setting time and compression strength of cement pastes containing different additives and particles, and studied the effects of these additives and particles on thickness swelling, internal bond strength and modulus of rupture of CBPB by using RSM （Response Surface Methodology）. The mathematical model equations （second-order response functions） were derived to optimize properties of CBPB by computer simulation programming. Predicted values were in agreement with experimental values （R2 values of 0.93, 0.96 and 0.96 for TS, IB and MOR, respectively）. RSM can be efficiently applied to model panel properties. The variables can affect the properties of panels. The cement composites with bending strength 〉 12.5 MPa and internal bond strength 〉 0.28 MPa can be made by using wheat straw as a reinforcing material. Straw particle usage up to 11.5% in the mixture satisfies the minimum requirements of International Standard, EN 312 （2003） for IB and MOR. The dose of 4.95% calcium chloride, by weight of cement, can improve mechanical properties of the panels at the minimum requirement of EN 312. By increasing straw content from 0 to 30%, TS was reduced by increasing straw particle usage up to 1.5% and with 5.54% calcium chloride in the mixture, TS satisfied the EN 312 standard.
文摘We evaluated the potential use of amino silane coupling agent （SiNH） to improve physical and mechanical properties of UF-bonded wheat straw （Triticurn aestivum L.） poplar wood particleboard. We examined the effects of varied content of silane coupling agent content and ratios of straw to poplar wood particles on particleboard prop- erties. The ratios of straw to poplar wood particles were 100：0, 85：15, 70：30 and 55：45. Silane coupling agent content was tested at three levels, 0, 5 and 10 %. The experimental panels were tested for their mechanical strength, including modulus of elasticity （MOE）, modulus of rupture （MOR）, intemal bonding （IB） and physical properties according to procedures specified in DIN 68763 （Chipboard for special purposes in building construction： concepts, requirements, testing, 1982-03, 1982）. All board properties were improved by the addition of silane cou- pling agent. The use of poplar wood particles had a positive effect on the mechanical properties of wheat straw parti- cleboard but had a negative effect on physical properties （thickness swelling and water absorption）.
文摘For manufacturing low-formaldehyde emission particleboard from wheat straw and urea-formaldehyde （UF） resins using urea treatment for indoor environments, we investigated the influence of urea treatment on the formaldehyde emission, physical and mechanical properties of the manufactured particleboard. Wheat straws were treated at three levels of urea concentration （5%, 10%, 15%） and 95℃ as holding temperature. Wheat straw particleboards were manufactured using hot press at 180℃ and 3 MPa with two types of UF adhesive （UF-45, UF-91）. Then the formaldehyde emission values, physical properties and mechanical properties were considered. The results show that the for- maldehyde emission value was decreased by increasing urea concentration. Furthermore, the results indicate that the specimens under urea treatment have better mechanical and physical properties compared with control specimens. Also specimens under urea treatment at 10% concentration and UF-91 type adhesive have the most optimum physical and mechanical strength.
文摘We used silane coupling agents to improve the bonding ability between wheat straw particles and UF resin, and investigated surface properties （wettability and surface roughness） and hardness of parti-cleboard made from UF-bonded wheat straw （Triticum aestivum L.） combined with poplar wood as affected by silane coupling agent content and straw/poplar wood particle ratios. We manufactured one-layered particleboard panels at four different ratios of straw to poplar wood par-ticles （0%, 15%, 30% and 45% wheat straw） and silane coupling agent content at three levels of 0, 5% and 10%. Roughness measurements, average roughness （Ra）, mean peak-to-valley height （Rz）, and root mean square roughness （Rq） were measured on unsanded samples by using a fine stylus tracing technique. We obtained contact angle measurements by using a goniometer connected to a digital camera and computer sys-tem. Boards containing greater amounts of poplar particles had superior hardness compared to control samples and had lower wettability. Panels made with higher amounts of silane had lower Rq values.
文摘Gypsum-bonded particleboard(GBPB) panels were made from various mixtures of particles of bagasse(Saccharum officinarum L.) and wheat straw(Triticum aestivum L.), bonded with different ratios of particle/gypsum. This study examined the feasibility of bagasse and wheat straw particles in the production of GBPB. One-layer experimental GBPBs with a density of 1.05 or 1.20 g·cm 3were manufactured at different ratios of bagasse/wheat straw, i.e., 100%/0%, 93.75%/6.25%, 87.5%/12.5%, 75%/25%, 50%/50%, 25%/75% and 0%/100% using two particle/ gypsum composite ratios, i.e., 1/2.75 and 1/3.25 by weight. Thickness swelling(TS), water absorption(WA), modulus of rupture(MOR), modulus of elasticity(MOE) and internal bond strength(IB) properties of the boards were evaluated and a statistical analysis was performed in order to examine the possible feasibility of these agricultural residues for use in commercial GBPB manufacturing. We determined that WA of panels decreases as the amount of straw increases to 100% and the LR/G(wood/gypsum) ratio decreases to 1/3.25, whereas the TS of panels decreases as the proportion of straw decreases to 0% and the LR/G ratio increases to 1/2.75. The experimental results also show that the MOR and MOE of panels containing 0%, 6.25% and 12.5% wheat straw with a LR/G ratio of 1/2.75 were higher than those of panels made from 25%–100% wheat straw with a LR/G ratio of 1/2.75, as well as those from all other percentages of straw with a LR/G ratio of 1/3.25. On the other hand, the IB of panels containing more than 12.5% straw with LR/G ratios of 1/2.75 and 1/3.25 were lower than those of panels made from 0–12.5% straw also with both LR/G ratios. Panels consisting of 0%, 6.25% and 12.5% wheat straw with LR/G ratios of 1/2.75 and 1/3.25 met the minimum EN standard requirements of mechanical properties for general purposes. All of the panels containing 0–100% wheat straw with a LR/ G ratio of 1/2.75 or 1/3.25 met the required level of TS for 24-h immersion.
