Wide spectral white light emitting diodes have been designed and grown on a sapphire substrate by using a metal-organic chemical vapor deposition system. Three quantum wells with blue-light-emitting, green-light-emitt...Wide spectral white light emitting diodes have been designed and grown on a sapphire substrate by using a metal-organic chemical vapor deposition system. Three quantum wells with blue-light-emitting, green-light-emitting and red-light-emitting structures were grown according to the design. The surface morphology of the film was observed by using atomic force microscopy. The films were characterized by their photoluminescence measurements. X-ray diffraction t9/2/9 scan spectroscopy was carried out on the multi-quantum wells. The secondary fringes of the symmetric ω/2θ X-ray diffraction scan peaks indicate that the thicknesses and the alloy compositions of the individual quantum wells are repeatable throughout the active region. The room temperature photoluminescence spectra of the structures indicate that the white light emission of the multi-quantum wells is obtained. The light spectrum covers 400 700 nm, which is almost the whole visible light spectrum.展开更多
The LIBS （Laser induced-breakdown spectroscopy） combined with BPNN （Back propagation neural network） was applied in rock sorting and distinguishing for 26 rock samples of 6 types. According to contents of major el...The LIBS （Laser induced-breakdown spectroscopy） combined with BPNN （Back propagation neural network） was applied in rock sorting and distinguishing for 26 rock samples of 6 types. According to contents of major elements in samples, we selected lines of Si, Al, Fe, K, Ca, Mg, Na, Ti and Mn. These lines of 9 elements composed three characteristic spectral models which were the WSLM （Wide spectral line model）, the PM （Peak model） and the PRM （Peak ratio model）. The first and the second characteristic spectral model were divided into 9 kinds, as follows： the characteristic spectrum with 1 element, the characteristic spectrum with 2 elements, we can deduce the rest from this and the last one has 9 elements. The third model was divided into 8 kinds which were using AI as reference element. We analysed spectrums of the three models by BPNN. Experimental results shown that whether sorting or distinguishing these samples, identification accuracies of the PM were more than that of the PRM overall, the same as the WSLM did to the PM. While the selected number of elements was 5, 6 or 7, the identification accuracy of the WSLM could reach more than 90%. Continuing to add the number of elements to improve identification accuracy was not very obvious.展开更多
基金supported by the Special Funds for Major State Basic Research Project,China(Grant No.2011CB301900)the Hi-tech Research Project,China(Grant No.2009AA03A198)+2 种基金the National Natural Science Foundation of China(Grant Nos.60990311, 60721063,60906025,60936004,60731160628,and 60820106003)the Nature Science Foundation of Jiangsu Province,China (Grant Nos.BK2008019,BK2010385,BK2009255,and BK2010178)the Research Funds from NJU-Yangzhou Institute of Opto-electronics,China
文摘Wide spectral white light emitting diodes have been designed and grown on a sapphire substrate by using a metal-organic chemical vapor deposition system. Three quantum wells with blue-light-emitting, green-light-emitting and red-light-emitting structures were grown according to the design. The surface morphology of the film was observed by using atomic force microscopy. The films were characterized by their photoluminescence measurements. X-ray diffraction t9/2/9 scan spectroscopy was carried out on the multi-quantum wells. The secondary fringes of the symmetric ω/2θ X-ray diffraction scan peaks indicate that the thicknesses and the alloy compositions of the individual quantum wells are repeatable throughout the active region. The room temperature photoluminescence spectra of the structures indicate that the white light emission of the multi-quantum wells is obtained. The light spectrum covers 400 700 nm, which is almost the whole visible light spectrum.
文摘The LIBS （Laser induced-breakdown spectroscopy） combined with BPNN （Back propagation neural network） was applied in rock sorting and distinguishing for 26 rock samples of 6 types. According to contents of major elements in samples, we selected lines of Si, Al, Fe, K, Ca, Mg, Na, Ti and Mn. These lines of 9 elements composed three characteristic spectral models which were the WSLM （Wide spectral line model）, the PM （Peak model） and the PRM （Peak ratio model）. The first and the second characteristic spectral model were divided into 9 kinds, as follows： the characteristic spectrum with 1 element, the characteristic spectrum with 2 elements, we can deduce the rest from this and the last one has 9 elements. The third model was divided into 8 kinds which were using AI as reference element. We analysed spectrums of the three models by BPNN. Experimental results shown that whether sorting or distinguishing these samples, identification accuracies of the PM were more than that of the PRM overall, the same as the WSLM did to the PM. While the selected number of elements was 5, 6 or 7, the identification accuracy of the WSLM could reach more than 90%. Continuing to add the number of elements to improve identification accuracy was not very obvious.
文摘设计了一款宽光谱日夜两用鱼眼监控镜头,使用近红外LED光源照明及IR-CUT双滤光片,近红外波长为850 nm,采用Zemax软件的多重配置结构设计,使用固定焦距,实现可见光和近红外光的共焦。对设计的光学系统结构和像差曲线进行分析,设计全视场角和相对孔径分别为175°和1/1.8,使用1/3 in CCD成像接收器件,全视场MTF值在空间频率100 lp/mm处达到0.3。
