The research results of processes proceeding in supersonic jets of light hydrocarbons, activated by an electron beam are presented. It is shown, that condensation suppressed at activation by electrons in the initial s...The research results of processes proceeding in supersonic jets of light hydrocarbons, activated by an electron beam are presented. It is shown, that condensation suppressed at activation by electrons in the initial stage of condensation. The developed condensation conditions mode leads to increasing of a part of heavy corpuscles in activated stream and not only owing to stimulation of condensation but because of formation of heavy hydrocarbonic molecules.展开更多
The terahertz(THz)vortex beam generators are designed and theoretically investigated based on single-layer ultra-thin transmission metasurfaces.Noncontinuous phase changes of metasurfaces are obtained by utilizing Pan...The terahertz(THz)vortex beam generators are designed and theoretically investigated based on single-layer ultra-thin transmission metasurfaces.Noncontinuous phase changes of metasurfaces are obtained by utilizing Pancharatnam-Berry phase elements,which possess different rotation angles and are arranged on two concentric rings centered on the origin.The circularly polarized incident THz beam could be turned into a cross-polarization transmission wave,and the orbital angular momentum(OAM)varies in value by lh.The l values change from±1 to±5,and the maximal cross-polarization conversion efficiency that could be achieved is 23%,which nearly reaches the theoretical limit of a single-layer structure.The frequency range of the designed vortex generator is from 1.2 THz to 1.9 THz,and the generated THz vortex beam could keep a high fidelity in the operating bandwidth.The propagation behavior of the emerged THz vortex beam is analyzed in detail.Our work offers a novel way of designing ultra-thin and single-layer vortex beam generators,which have low process complexity,high conversion efficiency and broad bandwidth.展开更多
This article presents a prototype of beam position and phase measurement(BPPM)electronics designed for the LINAC in China Accelerator Driven Sub-critical system(ADS).The signals received from the Beam Position Monitor...This article presents a prototype of beam position and phase measurement(BPPM)electronics designed for the LINAC in China Accelerator Driven Sub-critical system(ADS).The signals received from the Beam Position Monitor(BPM)detectors are narrow pulses with a repetition frequency of 162.5 MHz and a dynamic range more than40 dB.Based on the high-speed high-resolution Analog-to-Digital conversion technique,the input RF signals are directly converted to In-phase and Quadrature-phase(IQ)streams through under-sampling,which simplifies both the analog and digital processing circuits.All signal processing is integrated in one single FPGA,in which real-time beam position,phase and current can be obtained.A series of simulations and tests have been conducted to evaluate the performance.Initial test results indicate that this prototype achieves a phase resolution better than 0.1 degree and a position resolution better than 20μm over a 40 dB dynamic range with the bandwidth of 780 kHz,which is well beyond the application requirements.展开更多
A fully digital beam position monitoring system(DBPM) has been designed for SSRF(Shanghai Synchrotron Radiation Facility). As analog-to-digital converter(ADC) is a crucial part in the DBPM system, the sampling methods...A fully digital beam position monitoring system(DBPM) has been designed for SSRF(Shanghai Synchrotron Radiation Facility). As analog-to-digital converter(ADC) is a crucial part in the DBPM system, the sampling methods should be studied to achieve optimum performance. Different sampling modes were used and compared through tests. Long term variation among four sampling channels, which would introduce errors in beam position measurement, is investigated. An interleaved distribution scheme was designed to address this issue. To evaluate the sampling methods, in-beam tests were conducted in SSRF. Test results indicate that with proper sampling methods, a turn-by-turn(TBT) position resolution better than 1 μm is achieved, and the slow-acquisition(SA) position resolution is improved from 4.28 μm to 0.17 μm.展开更多
The microwave reflectometer is a popular non-intrusive plasma density diagnostic instrument on tokamaks that provides centimeter and millisecond level resolution.The ultrashort-pulse reflectometer(USPR)achieves plasma...The microwave reflectometer is a popular non-intrusive plasma density diagnostic instrument on tokamaks that provides centimeter and millisecond level resolution.The ultrashort-pulse reflectometer(USPR)achieves plasma density measurement by emitting a chirped wave containing a broadband signal and measuring the time of flight from different frequency components.A USPR system is currently being built on EAST(Experimental Advanced Superconducting Tokamak)to meet the needs of diagnostic of the pedestal density evolution,such as high-frequency small edge-localized modes.In order to predict the density reconstruction of the EAST USPR system,this work presents a numerical simulation study of the beam propagation of the chirped wave of extraordinary waves(X-mode)in the plasma based on Python.The electron density profile has been successfully reconstructed by the reflection signal interpretation.The small gap between the right-hand cut-off layer and the electron cyclotron resonance layer,due to the low plasma density on the plasma edge,causes unexpected leakage from the transmitting microwave beam to the pedestal and the core region.This kind of‘tunneling’effect will cause the reflected signal to have energy loss in the low-frequency band.The study also discusses the influence of the poloidal magnetic field on the reflected signal.The spatial variation of the poloidal magnetic field will lead to the conversion between extraordinary(X)waves and ordinary(O)waves,which leads to energy loss in the reflected signals.The simulation results show that the‘tunneling’effect and the O-X mode conversion effect have little effect on the EAST USPR system.Therefore,the currently designed transmit power meets the working requirements.展开更多
文摘The research results of processes proceeding in supersonic jets of light hydrocarbons, activated by an electron beam are presented. It is shown, that condensation suppressed at activation by electrons in the initial stage of condensation. The developed condensation conditions mode leads to increasing of a part of heavy corpuscles in activated stream and not only owing to stimulation of condensation but because of formation of heavy hydrocarbonic molecules.
基金the National Natural Science Foundation of China(Grant No.62071312)the Important R&D Projects of Shanxi Province,China(Grant No.201803D121083)the Shanxi Scholarship Council(Grant No.2020-135).
文摘The terahertz(THz)vortex beam generators are designed and theoretically investigated based on single-layer ultra-thin transmission metasurfaces.Noncontinuous phase changes of metasurfaces are obtained by utilizing Pancharatnam-Berry phase elements,which possess different rotation angles and are arranged on two concentric rings centered on the origin.The circularly polarized incident THz beam could be turned into a cross-polarization transmission wave,and the orbital angular momentum(OAM)varies in value by lh.The l values change from±1 to±5,and the maximal cross-polarization conversion efficiency that could be achieved is 23%,which nearly reaches the theoretical limit of a single-layer structure.The frequency range of the designed vortex generator is from 1.2 THz to 1.9 THz,and the generated THz vortex beam could keep a high fidelity in the operating bandwidth.The propagation behavior of the emerged THz vortex beam is analyzed in detail.Our work offers a novel way of designing ultra-thin and single-layer vortex beam generators,which have low process complexity,high conversion efficiency and broad bandwidth.
基金Supported by the Knowledge Innovation Program of The Chinese Academy of Sciences(KJCX2-YW-N27)the National Natural Science Foundation of China(No.11205153,11185176,and 10875119)the Fundamental Research Funds for the Central Universities(WK2030040029)
文摘This article presents a prototype of beam position and phase measurement(BPPM)electronics designed for the LINAC in China Accelerator Driven Sub-critical system(ADS).The signals received from the Beam Position Monitor(BPM)detectors are narrow pulses with a repetition frequency of 162.5 MHz and a dynamic range more than40 dB.Based on the high-speed high-resolution Analog-to-Digital conversion technique,the input RF signals are directly converted to In-phase and Quadrature-phase(IQ)streams through under-sampling,which simplifies both the analog and digital processing circuits.All signal processing is integrated in one single FPGA,in which real-time beam position,phase and current can be obtained.A series of simulations and tests have been conducted to evaluate the performance.Initial test results indicate that this prototype achieves a phase resolution better than 0.1 degree and a position resolution better than 20μm over a 40 dB dynamic range with the bandwidth of 780 kHz,which is well beyond the application requirements.
基金Supported by the Knowledge Innovation Program of the Chinese Academy of Sciences(No.KJCX2-YW-N27)National Natural Science Foundation of China(Nos.11205153 and 11175176)
文摘A fully digital beam position monitoring system(DBPM) has been designed for SSRF(Shanghai Synchrotron Radiation Facility). As analog-to-digital converter(ADC) is a crucial part in the DBPM system, the sampling methods should be studied to achieve optimum performance. Different sampling modes were used and compared through tests. Long term variation among four sampling channels, which would introduce errors in beam position measurement, is investigated. An interleaved distribution scheme was designed to address this issue. To evaluate the sampling methods, in-beam tests were conducted in SSRF. Test results indicate that with proper sampling methods, a turn-by-turn(TBT) position resolution better than 1 μm is achieved, and the slow-acquisition(SA) position resolution is improved from 4.28 μm to 0.17 μm.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China(No.2019YFE03030004)National Natural Science Foundation of China(No.12005144)。
文摘The microwave reflectometer is a popular non-intrusive plasma density diagnostic instrument on tokamaks that provides centimeter and millisecond level resolution.The ultrashort-pulse reflectometer(USPR)achieves plasma density measurement by emitting a chirped wave containing a broadband signal and measuring the time of flight from different frequency components.A USPR system is currently being built on EAST(Experimental Advanced Superconducting Tokamak)to meet the needs of diagnostic of the pedestal density evolution,such as high-frequency small edge-localized modes.In order to predict the density reconstruction of the EAST USPR system,this work presents a numerical simulation study of the beam propagation of the chirped wave of extraordinary waves(X-mode)in the plasma based on Python.The electron density profile has been successfully reconstructed by the reflection signal interpretation.The small gap between the right-hand cut-off layer and the electron cyclotron resonance layer,due to the low plasma density on the plasma edge,causes unexpected leakage from the transmitting microwave beam to the pedestal and the core region.This kind of‘tunneling’effect will cause the reflected signal to have energy loss in the low-frequency band.The study also discusses the influence of the poloidal magnetic field on the reflected signal.The spatial variation of the poloidal magnetic field will lead to the conversion between extraordinary(X)waves and ordinary(O)waves,which leads to energy loss in the reflected signals.The simulation results show that the‘tunneling’effect and the O-X mode conversion effect have little effect on the EAST USPR system.Therefore,the currently designed transmit power meets the working requirements.
