Feasibility study of the photonuclear reaction cross section of medical radioisotopes using a laser Compton scattering gamma source

In recent years,the gap between the supply and demand of medical radioisotopes has increased,necessitating new methods for producing medical radioisotopes.Photonuclear reactions based on gamma sources have unique advantages in terms of producing high specific activity and innovative medical radioisotopes.However,the lack of experimental data on reaction cross sections for photonuclear reactions of medical radioisotopes of interest has severely limited the development and production of photonuclear transmutation medical radioisotopes.In this study,the entire process of the generation,decay,and measurement of medical radioisotopes was simulated using online gamma activation and offline gamma measurements combined with a shielding gamma-ray spectrometer.Based on a quasi-monochromatic gamma beam from the Shanghai Laser Electron Gamma Source(SLEGS),the feasibility of this measurement of production cross section for surveyed medi-cal radioisotopes was simulated,and specific solutions for measuring medical radioisotopes with ultra-low production cross sections were provided.The feasibility of this method for high-precision measurements of the reaction cross section of medical radioisotopes was demonstrated.

Early gastric cancer diagnostic ability of ultrathin endoscope loaded with laser light source

BACKGROUND Conventionally, the low luminous intensity, low image resolution, and difficulty in operation have been reported with the ultrathin endoscope. However, it has markedly advanced recently. The improvement of the diagnostic ability is expected.AIM To compare the early gastric cancer diagnostic ability of an ultrathin endoscope loaded with a laser light source and that of the conventional endoscope.METHODS The target subjects were 375 consecutive patients who underwent endoscopy at our hospital for post-endoscopic submucosal dissection follow-up of gastric cancer from January to August 2018. During endoscopy, the ultrathin endoscope was used in 140 patients(37.3%), and the conventional endoscope was used in235 patients(62.7%). Patient background was adjusted using the propensity score matching method, and gastric cancer detection ability was evaluated in the two groups.RESULTS The gastric cancer detection rate was 7.8% in the ultrathin endoscope group and7.0% in the conventional endoscope group, and the mean intragastric observation time was 4.1 ± 1.7 min in the ultrathin endoscope group and 4.1 ± 1.9 min in the conventional endoscope group, showing no significant differences between the groups. Moreover, the biopsy implementation rate was 31.8% in the ultrathin endoscope group and 41.1% in the conventional endoscope group, and the biopsy prediction rate was 17.9% and 13.2%, respectively, showing no significant differences between the groups.CONCLUSION The gastric cancer diagnostic ability of the ultrathin endoscope loaded with a laser light source was comparable to that of the conventional endoscope. The observation time was also comparable. Thus, endoscopy using the ultrathin endoscope loaded with the laser light source would be the first option in screening examinations of gastric cancer due to its low invasion.

Commissioning of a high-resolution collinear laser spectroscopy apparatus with a laser ablation ion source

Collinear laser spectroscopy is a powerful tool for studying the nuclear spins,electromagnetic moments,and charge radii of exotic nuclei.To study the nuclear properties of unstable nuclei at the Beijing Radioactive Ion-beam Facility(BRIF)and the future High Intensity Heavy-ion Accelerator Facility(HIAF),we developed a collinear laser spectroscopy apparatus integrated with an offline laser ablation ion source and a laser system.The overall performance of this state-of-the-art technique was evaluated,and the system was commissioned using a bunched stable ion beam.The high-resolution optical spectra for the 4s ^(2)S_(1/2)→4p^(2)P_(3/2)(D2)ionic transition of ^(40;42;44;48)Ca isotopes were successfully measured.The extracted isotope shifts relative to ^(40)Ca showed excellent agreement with the literature values.This system is now ready for use at radioactive ion beam facilities such as the BRIF and paves the way for the further development of higher-sensitivity collinear resonance ionization spectroscopy techniques.

Laser ion source for heavy ion inertial fusion

The proposed heavy ion inertial fusion(HIF)scenarios require ampere class low charge state ion beams of heavy species.The laser ion source(LIS)is recognized as one of the promising candidates of ion beam providers,since it can deliver high brightness heavy ion beams to accelerators.The design of LIS for the HIF depends on the accelerator structure and accelerator complex following the source.In this article,we discuss the specifications and design of an appropriate LIS assuming two major types of the accelerators:radio frequency(RF)high quality factor cavity type and non-resonant induction core type.We believe that a properly designed LIS would satisfy the requirements of both types,while some issues need to be verified experimentally.

Model heat source using actual distribution of laser power density for simulation of laser processing

The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although various modifications of heat sources in the aspect of absorption process of laser by materials have been purposed, the distribution of laser power density(DLPD) in MHS is still modeled theoretically. However, in the actual situations of laser processing, the DLPD is definitely different from the ideal models. So, it is indispensable to build MHS using actual DLPD to improve the accuracy of simulation results. Besides, an automatic modeling method will be benefit to simplify the tedious pre-processing of simulations. This paper presents a modeling method and corresponding algorithm to model heat source using measured DLPD. This algorithm automatically processes original data to get modeling parameters and provides a step MHS combining with absorption models. Simulations and experiments of heat transfer in steel plates irradiated by laser prove the mothed and the step MHS. Moreover, the investigations of laser induced thermal-crack propagation in glass highlight the signification of modeling heat source based on actual DLPD and demonstrate the enormous application of this method in the simulation of laser processing.

Optimization of a laser plasma-based x-ray source according to WDM absorption spectroscopy requirements

X-ray absorption spectroscopy is a well-accepted diagnostic for experimental studies of warm dense matter.It requires a short-lived X-ray source of sufficiently high emissivity and without characteristic lines in the spectral range of interest.In the present work,we discuss how to choose an optimum material and thickness to get a bright source in the wavelength range 2A–6A(∼2 keV to 6 keV)by considering relatively low-Z elements.We demonstrate that the highest emissivity of solid aluminum and silicon foil targets irradiated with a 1-ps high-contrast sub-kJ laser pulse is achieved when the target thickness is close to 10μm.An outer plastic layer can increase the emissivity even further.

Fundamental Concepts behind the Development of Gamma-Ray, Directed Energy Sources

We discuss novel advanced concepts suitable for the practical design of gamma-ray sources of directed energy. One concept is based on the self-channeling of a powerful optical laser in a gas within a metal tube. Another concept employs a direct excitation of a quadrupole nuclear level by a powerful optical laser. The third concept is based on the process of a high-order harmonic generation by an x-ray laser. All three concepts can be used for designing gamma-ray lasers that would have significant advantages over x-ray lasers. First, missile defense systems employing gamma-ray lasers would be weather independent. Second, the gamma-ray laser radiation can penetrate through the sand, which could be suspended in the air in a desert either naturally (due to strong winds) or artificially (as a protective “shield”). Besides, the first out of the three concepts can beemployed for creating non-laser gamma-ray sources of directed energy to be used for detecting stored radioactive materials, including the radioactive materials carried by an aircraft or a satellite. Last but not least: these concepts can be also used for remotely destroying biological and chemical weapons as a preemptive strike or during its delivery phase, as well as for distinguishing a nuclear warhead from decoy warheads. Thus, the defense capabilities of the proposed gamma-ray lasers can save numerous lives.

Experimental investigation of laser-produced-plasma EUV source based on liquid target

A laser-produced plasma(LPP) source was built using liquid as target and a Nd:YAG laser as the irradiation laser, and the LPP source's radiation with ethanol and acetone target respectively was measured by an AXUV100 silicon photodiode combined with a McPHERSON model 247 grazing incidence monochromator of the resolution Δλ≤0.075 nm and the wavelength scanning interval 0.5 nm. Both ethanol and acetone target LPP source had EUV emission at 11～20 nm wavelength. The comparison between the spectra of the two kinds of target materials shows that all the two kinds of target source's spectra are the result of oxygen ions' transitions under current source's parameters, but the spectrum intensity from different target sources is different. The spectra intensity from the ethanol target is higher than that from the acetone target. In addition, the target liquid is forced into the vacuum chamber by the background pressure supported by the connected external high pressure gas, and the influence of the background pressure on the source's intensity is investigated.

Heat source analyses of dual laser-beam bilateral synchronous welding for T-joint

The DLBSW（ dual laser-beam bilateral synchronous welding） technology of T-type joint has been widely used for the connection of skins and stringers in airplane industry. To understand the thermodynamic and mechanical behavior of this process, it is necessary to establish a reasonable heat source model. Two different surface-body combination heat source models are adopted in this paper. Both models use the Gaussian surface heat source model and one is combined with the cone body heat source model and the other is combined with Gaussian rotator body heat source model. The simulation results of these two different models are investigated. And the temperature field results of DLBSW process for T-joint with two different heat sources are discussed. It is indicated that the combination heat source model is effective to simulate the DLBSW process and the current study is useful for more profound research in this field.

MODEL OF LASER-TIG HYBRID WELDING HEAT SOURCE

The welding mechanism of laser-TIG hybrid welding process is analyzed. Withthe variation of arc current, the welding process is divided into two patterns: deep-penetrationwelding and heat conductive welding. The heat flow model of hybrid welding is presented. As todeep-penetration welding, the heat source includes a surface heat flux and a volume heat flux. Theheat source of heat conductive welding is composed of two Gaussian distribute surface heat sources.With this heat source model, a temperature field is calculated. The finite element code MARC isemployed for this purpose. The calculation results show a good agreement with the experimental data.

X－Ray from Laser Produced Plasma as an Excitation Source in Spectroscopy Study

Spectral and temporal characteristics of soft X-ray from the laser-produced plasma (LPX)were studied under different conditions.The obtained LPX spectrum showed a little different from the black-body distribution in some other references,which is analysed theoretically.It is shown that LPX can be used as a convenient exciting method in spectroscopy study.

A NOVEL SWEPT LASER SOURCE BASED ON COMBINED TUNABLE FILTERS FOR OCT

A novel broad tunable bandwidth and narrow instantaneous line-width linear swept laser source using combined tunable filters working at 1,300 nm center wavelength is proposed.The combined filters consist of a fiber Fabry
Perot tunable filter and a tunable filter based on diffractive grating with scanning polygon mirror.In contrast to traditional method using single tunable filter,the trade-off between bandwidth and instantaneous line-width is alleviated.Parallel implementation of two semiconductor optical amplifiers with different wavelength range is adopted in the laser resonator for broadband light amplification.The Fourier domain mode locking swept laser source with combined tunable filters offers broadband tunable range with narrow instantaneous line-width,which is especially benefiting for high-quality optical frequency domain imaging.The proposed Fourier domain mode locking swept laser source provides a tuning range of 160 nm with instantaneous line-width of about 0.01nm at sweeping rate of 15 kHz,a finesse of 16,000 is thus achieved.

Chemical Selectivity of Laser Ion Source for on-Line Mass Separator

Thulium(Tm)atoms are resonantly ionized in a hot tube by stepwise excitations us-ing three dye lasers pumped by a series of copper vapor pulsed at a 10 kHz rate.The chemicalselectivity of the laser ion source is measured as a function of temperature of the tubes made ofTa,Nb-Zr and TaC.The chemical selectivity rises from 50 to 10000 with decreasing tube temp-erature and strongly depends on the tube material.A chemical selectivity of about 10000 withhigh efficiencies is obtained with the Nb-Zr and TaC tubes.Such a laser ion source can be usedin on-line mass separator to obtain isobarically pure ion beams.

Development of a Broadly Tunable Mid-Infrared Laser Source for Highly Sensitive Multiple Trace Gas Detection

A room-temperature broadly tunable mid-infrared difference frequency laser source for highly sensitive trace gas detection has been developed recently in our laboratory. The mid-infrared laser system is based on quasi-phase-matched （QPM） difference frequency generation （DFG） in a multigrating, temperature-controlled periodically poled LiNbO3 （PPLN） crystal and employs two near-infrared diode lasers as pump sources. The mid-infrared coherent radiation generated is tunable from 3.2 μm to 3.7μm with an output power of about 100 μW. By changing one of the pump laser head with another wavelength range, we can readily obtain other needed mid-infrared wavelength range cover. The performance of the mid-infrared laser system and its application to highly sensitive spectroscopic detection of CH4, HCl, CH2O, and NO2 has been carried out. A multi-reflection White cell was used in the experiment gaining ppb-level sensitivity. The DFG laser system has the features of compact, room-temperature operation, narrow line-width, and broadly continuous tunable range for potential applications in industry and environmental monitoring.

Experimental Study of the X-Ray Radiation Source at Approximately Constant Radiation Temperature

An X-ray radiation source with approximately constant radiation temperature is realized by irradiating golden hohlraum with a shaped laser pulse. A simple theoretical model based on power balance is used to design the shape of the drive laser pulse. Experiments are carried out on the Shenguang III prototype laser facility, and the experimentM results are presented for radiation sources with the flat-top lasting about 2.5 ns at two different peak temperatures of about 150 eV and 170 eV, respectively, including the the drive laser pulses and the time integrated possible improvements are discussed. time histories of the temperatures, the shapes of radiation spectra. The validity of the model and

Simulation on the deformation controlling of T-joint LBW with auxiliary heat source for high strength aluminum alloy

To avoid the angular deformation of aluminum alloy T-joint weldments, a new method named welding with auxiliary heat source is proposed. The welding simulation is performed with the commercial finite element software Abaqus and FORTRAN programme encoding a special conical heat source with Gaussian volumetric distribution of flux. The influence of the local model on the temperature, residual stress, and welding deformation distributions is investigated. The findings show that angular deformation achieved through numerical computation completely consists with the experimental result which has proved the effectiveness of the finite element methods developed. Various measurements performed on small-scale welded test specimens provide a data base of experimental results that serves as a bench mark for qualification of the simulation result. Finally, the residual stress and strain states in a T-joint are predicted.

Tuning the velocity and flux of a low-velocity intense source of cold atomic beam

We investigate experimentally and numerically the quantitative dependence of characteristics of a low-velocity intensity source（LVIS） of atomic beam on light parameters, especially the polarization of cooling laser along the atomic beam axis（pushing beam）. By changing the polarization of the pushing beam, the longitudinal mean velocity of a rubidium atomic beam can be tuned continuously from 10 to 20 m/s and the flux can range from 3 × 10^-8 to 1 × 10^-9 atoms/s, corresponding to the maximum sensitivity of the velocity with respect to the polarization angle of 20（m/s）/rad and the mean sensitivity of flux of 1.2 × 10^-9（atoms/s）/rad. The mechanism is explained with a Monte-Carlo based numerical simulation method, which shows a qualitative agreement with the experimental result. This is also a demonstration of a method enabling the fast and continuous modulation of a low-velocity intense source of cold atomic beam on the velocity or flux,which can be used in many fields, like the development of a cold atomic beam interferometer and atom lithography.

Numerical simulation for all-optical Thomson scattering X-ray source

Energy spectra, angular distributions, and temporal profiles of the photons produced by an all-optical Thomson scat- tering X-ray source are explored through numerical simulations based on the parameters of the SILEX-I laser system （800 nm, 30 fs, 300 TW） and the previous wakefield acceleration experimental results. The simulation results show that X-ray pulses with a duration of 30 fs and an emission angle of 50 mrad can be produced from such a source. Using the optimized electron parameters, X-ray pulses with better directivity and narrower energy spectra can be obtained. Besides the electron parameters, the laser parameters such as the wavelength, pulse duration, and spot size also affect the X-ray yield, the angular distribution, and the maximum photon energy, except the X-ray pulse duration which is slightly changed for the case of ultrafast laser-electron interaction.

Continued Study on Hohlraum Radiation Source with Approximately Constant Radiation Temperature

An experiment was performed on the Shenguang III prototype laser facility to continue the study on hohlraum radiation source with approximately constant radiation temperature using a continuously shaped laser pulse.A radiation source with a flattop temperature of about130 e V that lasted about 5 ns was obtained.The previous analytical iteration method based on power balance and self-similar solution of ablation was modified taking into account the plasma movements and it was used to design the laser pulse shape for experiment.A comparison between experimental results and simulation is presented and better agreement was achieved using the modified method.Further improvements are discussed.

Sources of IR Radiation in the Earth’s Atmosphere in Connection with the PeTa Effect

The PeTa (Perelman-Tatartchenko) effect is the radiation of the energy of a first-order phase transition during the transition from a less condensed phase to a more condensed one. The effect was independently discovered by M. Perelman and the author of this paper. Six papers on the PeTa effect have been published in this journal over the past nine years. They are devoted to the development of PeTa models to explain the following phenomena: IR radiation from cold surfaces, cavitation luminescence/sonoluminescence (CL/SL), laser-induced bubble luminescence (LIBL), and vapor bubble luminescence (VBL) in underwater geysers. This paper describes the sources of PeTa radiation in the Earth’s atmosphere. These sources of infrared radiation have been investigated by numerous research groups, but their interpretation either does not exist at all, or it is erroneous. The following phenomena are specifically considered: PeTa radiation during the formation of clouds and fog;a pulse laser based on the PeTa radiation;condensation explosions as sources of PaTa radiation;measurement of the concentration of water vapor in the atmosphere using PeTa radiation;atmospheric scintillation of infrared radiation in the atmosphere due to the PeTa effect;PeTa radiation as a source of comfort for the igloo;the influence of PeTa radiation on living organisms;PeTa radiation due to characteristics of tropical storms;PeTa radiation as a possible precursor to earthquakes. The problem of global warming, which worries everyone, as it turns out, is also associated with the PeTa effect.