Criterion of aerodynamic performance of large-scale offshore horizontal axis wind turbines

With the background of offshore wind energy projects, this paper studies aerodynamic performance and geometric characteristics of large capacity wind turbine rotors （1 to 10 MW）, and the main characteristic parameters such as the rated wind speed, blade tip speed, and rotor solidity. We show that the essential criterion of a high- performance wind turbine is a highest possible annual usable energy pattern factor and a smallest possible dimension, capturing the maximum wind energy and producing the maximum annual power. The influence of the above-mentioned three parameters on the pattern factor and rotor geometry of wind turbine operated in China＇s offshore meteoro- logical environment is investigated. The variation patterns of aerodynamic and geometric parameters are obtained, analyzed, and compared with each other. The present method for aerodynamic analysis and its results can form a basis for evaluating aerodynamic performance of large-scale offshore wind turbine rotors.

Investigation of Load Prediction on the Mexico Rotor Using the Technique of Determination of the Angle of Attack

Blade element moment（BEM） is a widely used technique for prediction of wind turbine aerodynamics performance,the reliability of airfoil data is an important factor to improve the prediction accuracy of aerodynamic loads and power using a BEM code.The method of determination of angle of attack on rotor blades developed by SHEN,et al is successfully used to extract airfoil data from experimental characteristics on the MEXICO（Model experiments in controlled conditions） rotor.Detailed surface pressure and particle image velocimetry（PIV） flow fields at different rotor azimuth positions are examined to determine the sectional airfoil data.The present technique uses simultaneously both PIV data and blade pressure data that include the actual flow conditions（for example,tunnel effects）,therefore it is more advantageous than other techniques which only use the blade loading（pressure data）.The extracted airfoil data are put into a BEM code,and the calculated axial and tangential forces are compared to both computations using BEM with Glauert＇s and SHEN＇s tip loss correction models and experimental data.The comparisons show that the present method of determination of angle of attack is correct,and the re-calculated forces have good agreements with the experiment.

Decoupling Scheme for Virtual Synchronous Generator Controlled Wind Farms Participating in Inertial Response

In this paper,the dynamic coupling between the wind turbine rotor speed recovery(WTRSR)and inertial response of the conventional virtual synchronous generator(VSG)controlled wind farms(WFs)is analyzed.Three distinguishing features are revealed.Firstly,the inertial response characteristics of VSG controlled WFs(VSG-WFs)are impaired by the dynamic coupling.Secondly,when the influence of WTRSR is dominant,the inertial response characteristics of VSG-WFs are even worse than the condition under which WFs do not participate in the response of grid frequency.Thirdly,this phenomenon cannot be eliminated by only enlarging the inertia parameter of VSG-WFs,because the influence of WTRSR would also increase with the enhancement of inertial response.A decoupling scheme to eliminate the negative influence is then proposed in this paper.By starting the WTRSR process after inertial response period,the dynamic coupling is eliminated and the inertial response characteristics of WFs are improved.Finally,the effectiveness of the analysis and the proposed scheme are verified by simulation results.