Influence of wind-blown sand content on the mechanical quality state of ballast bed in sandy railways

During the operation of sandy railways, the challenge posed by wind-blown sand is a persistent issue. An in-depth study on the influence of wind-blown sand content on the macroscopic and microscopic mechanical properties of the ballast bed is of great significance for understanding the potential problems of sandy railways and proposing reasonable and adequate maintenance and repair strategies. Building upon existing research, this study proposes a new assessment indicator for sand content. Utilizing the discrete element method(DEM) and fully considering the complex interactions between ballast and sand particles, three-dimensional(3D) multi-scale analysis models of sandy ballast beds with different wind-blown sand contents are established and validated through field experiments. The effects of varying wind-blown sand content on the microscopic contact distribution and macroscopic mechanical behavior(such as resistance and support stiffness) of ballast beds are carefully analyzed. The results show that with the increase in sand content, the average contact force and coordination number between ballast particles gradually decrease, and the disparity in contact forces between different layers of the ballast bed diminishes. The longitudinal and lateral resistance of the ballast bed initially decreases and then increases, with a critical point at 10% sand content. At 15% sand content, the lateral resistance is mainly shared by the ballast shoulder. The longitudinal resistance sharing ratio is always the largest on the sleeper side, followed by that at the sleeper bottom, and the smallest on the ballast shoulder. When the sand content exceeds 10%, the contribution of sand particles to stiffness significantly increases, leading to an accelerated growth rate of the overall support stiffness of the ballast bed, which is highly detrimental to the long-term service performance of the ballast bed. In conclusion, it is recommended that maintenance and repair operations should be promptly conducted when the sand content of the ballast bed reaches or exceeds 10%.

Desertification and Blown Sand Disaster in China

Approximately 331 million ha, one-third of China＇s total land, is prone to desertification processes, leading to natural disasters and economic losses. In this study, the situation, tendency, their influences and their risk governance of desertification and blown sand disaster in China were examined using satellite images, field photographs, field data and a literature review. The desiccated areas in Lop Nor and the lower Heihe River fluvial plain covered about 50,000 km2 and 40,000 km2, respectively. In Ejina, about 100 species of vegetation became extinct. The rate of wind erosion in China was between 1,000 tons/km2/year and 2,000 tons/km2/year. There were 12 sand deserts and sandy lands, occupying a total of 710,000 km2. Salinized soils occurred across 99.1 million ha. The two main sand and dust storm-prone areas in China were the Tarim Basin and its surroundings, and the Alxa Plateau and its surroundings. From 1981 to 2007, the annual average frequency of sand and dust storms varied from 1 d to 37 d with a general increase from southeast to northwest. Since 1978, China has implemented a number of ecological construction projects that have reduced desertification from 1999 to 2004 and from 2005 to 2009, and the number of dust and sand storm days from 9.3 d between 1954 and 1959 to 4.4 d between 2000 and 2007. The results could improve understanding of desertification and blown sand disasters in China and provide valuable experiences for global desertification control.

Application of Electronic Sand Table System in Geological Disasters Meteorological Service Based on GIS

With complex terrain and developed economy, Zhejiang Province has suffered a lot from the frequent geological disasters, which have done great damages to the construction and development of the whole province. Therefore, it is particularly important to improve the geological disasters meteorological service. Electronic sand table system, a high-tech product of three-dimensional visualization, can provide the geological disaster meteorological service with the intuitive and visual application environment. In this study, we developed electronic sand table system based on GIS and established the geological disasters meteorological service database. In addition, we also analyzed and discussed the applications of meteorological service in online weather forecast, meteorological warning message, and multimedia meteorological electronic display. The application of electronic sand table system in geological disaster meteorological services for disaster prevention and mitigation is of great importance that it provides intuitive terrain analysis data for the forecast of geological disasters warning, which greatly enhances the ability of geological disasters meteorological service.

Damage by wind-blown sand and its control measures along the Taklimakan Desert Highway in China

Desertification is one of the most serious environmental problems in the world,especially in the arid desert regions.Combating desertification,therefore,is an urgent task on a regional or even global scale.The Taklimakan Desert in China is the second largest mobile desert in the world and has been called the''Dead Sea''due to few organisms can exist in such a harsh environment.The Taklimakan Desert Highway,the longest desert highway(a total length of 446 km)across the mobile desert in the world,was built in the 1990s within the Taklimakan Desert.It has an important strategic significance regarding oil and gas resources exploration and plays a vital role in the socio-economic development of southern Xinjiang,China.However,wind-blow sand seriously damages the smoothness of the desert highway and,in this case,mechanical sand control system(including sand barrier fences and straw checkerboards)was used early in the life of the desert highway to protect the road.Unfortunately,more than 70%of the sand barrier fences and straw checkerboards have lost their functions,and the desert highway has often been buried and frequently blocked since 1999.To solve this problem,a long artificial shelterbelt with the length of 437 km was built along the desert highway since 2000.However,some potential problems still exist for the sustainable development of the desert highway,such as water shortage,strong sandstorms,extreme environmental characteristics and large maintenance costs.The study aims to provide an overview of the damages caused by wind-blown sand and the effects of sand control measures along the Taklimakan Desert Highway.Ultimately,we provide some suggestions for the biological sand control system to ensure the sustainable development of the Taklimakan Desert Highway,such as screening drought-resistant species to reduce the irrigation requirement and ensure the sound development of groundwater,screening halophytes to restore vegetation in the case of soil salinization,and planting cash crops,such as Cistanche,Wolfberry,Apocynum and other cash crops to decrease the high cost of maintenance on highways and shelterbelts.

Effect of the W-beam central guardrails on wind-blown sand deposition on desert expressways in sandy regions

Many desert expressways are affected by the deposition of the wind-blown sand,which might block the movement of vehicles or cause accidents.W-beam central guardrails,which are used to improve the safety of desert expressways,are thought to influence the deposition of the wind-blown sand,but this has yet not to be studied adequately.To address this issue,we conducted a wind tunnel test to simulate and explore how the W-beam central guardrails affect the airflow,the wind-blown sand flux and the deposition of the wind-blown sand on desert expressways in sandy regions.The subgrade model is 3.5 cm high and 80.0 cm wide,with a bank slope ratio of 1:3.The W-beam central guardrails model is 3.7 cm high,which included a 1.4-cm-high W-beam and a 2.3-cm-high stand column.The wind velocity was measured by using pitot-static tubes placed at nine different heights(1,2,3,5,7,10,15,30 and 50 cm)above the floor of the chamber.The vertical distribution of the wind-blown sand flux in the wind tunnel was measured by using the sand sampler,which was sectioned into 20 intervals.In addition,we measured the wind-blown sand flux in the field at K50 of the Bachu-Shache desert expressway in the Taklimakan Desert on 11 May 2016,by using a customized 78-cm-high gradient sand sampler for the sand flux structure test.Obstruction by the subgrade leads to the formation of two weak wind zones located at the foot of the windward slope and at the leeward slope of the subgrade,and the wind velocity on the leeward side weakens significantly.The W-beam central guardrails decrease the leeward wind velocity,whereas the velocity increases through the bottom gaps and over the top of the W-beam central guardrails.The vertical distribution of the wind-blown sand flux measured by wind tunnel follows neither a power-law nor an exponential function when affected by either the subgrade or the W-beam central guardrails.At 0.0H and 0.5H(where H=3.5 cm,which is the height of the subgrade),the sand transport is less at the 3 cm height from the subgrade surface than at the 1 and 5 cm heights as a result of obstruction by the W-beam central guardrails,and the maximum sand transportation occurs at the 5 cm height affected by the subgrade surface.The average saltation height in the presence of the W-beam central guardrails is greater than the subgrade height.The field test shows that the sand deposits on the overtaking lane leeward of the W-beam central guardrails and that the thickness of the deposited sand is determined by the difference in the sand mass transported between the inlet and outlet points,which is consistent with the position of the minimum wind velocity in the wind tunnel test.The results of this study could help us to understand the hazards of the wind-blown sand onto subgrade with the W-beam central guardrails.

Experimental analysis of sand particles' lift-off and incident velocities in wind-blown sand flux

The probability distributions of sand particles＇ lift-off and incident velocities in a wind-blown sand flux play very important roles in the simulation of the wind-blown sand movement. In this paper, the vertical and the horizontal speeds of sand particles located at 1.0 mm above a sand-bed in a wind-blown sand flux are observed with the aid of Phase Doppler Anemometry （PDA） in a wind tunnel. Based on the experimental data, the probability distributions of not only the vertical lift-off speed but also the lift-off velocity as well as its horizontal component and the incident velocity as well as its vertical and horizontal components can be obtained by the equal distance histogram method. It is found, according to the results of the X^2-test for these probability distributions, that the probability density functions （pdf＇s） of the sand particles＇ lift-off and incident velocities as well as their vertical com- ponents are described by the Gamma density function with different peak values and shapes and the downwind incident and lift-off horizontal speeds, respectively, can be described by the lognormal and the Gamma density functions, These pdf＇s depend on not only the sand particle diameter but also the wind speed.

Dynamic Characteristics Analysis on Wind-Blown Sand Ground under Dynamic Compaction Vibration

In the 6000 kN·m energy level dynamic compaction on Inner Mongolia wind-blown sand foundation treatment process, the dynamic characteristics and dynamic response are measured. Vibration action time, vibration main frequency, peak acceleration and peak velocity are analyzed. The vibration acting time is very short, the vertical average vibration acting time increases obviously with distance increasing, and the horizontal average vibration time does hardly change. The main frequency of vibration is at 4.60 - 24.90 Hz, which depends on the soil properties and soil layer distribution. The peak acceleration and peak velocity space distribution are similar. The maximum of horizontal acceleration peak is close to vertical velocity peak, and is near to 51 g under rammer. The maximum of horizontal velocity peak is close to vertical velocity peak, and is near to 54 m/s under rammer. The peak acceleration and velocity are rapidly attenuated, but the vertical peak acceleration and peak velocity are slowly attenuated than horizontal direction. The effective treating depth arrives 13 m for wind-blown wind, peak acceleration is 1.8 g or so, and peak velocity is 2.1 m/s or so. Horizontal treating range is 2.6 times of rammer diameter, and vertical treating range is 5.65 times of rammer diameter.

Progress on research and mitigation of wind-blown sand risk in Dunhuang Singing Sand Mountain and Crescent Spring Scenic area,China

The Singing Sand Mountain and Crescent Spring Scenic Spot in Dunhuang,Northwest China is a world-renowned desert attraction that is also an integral component of the Dunhuang UNESCO Global Geopark.This scenic area underwent a 30-year transformation,i.e.,from a severe sand risk with spring water threatened by sand burial due to dune deformation,to restoration of the original sand flow field and mitigation of the sand burial problem.The current paper summarizes the research on the intensive monitoring of the dynamic change of star dunes near the spring,observation of wind and sand flow movement,and then restoring the harmonic vibration of the sand particles(singing sand)that were previously silenced.The existing and prospective impacts of anthropogenic and natural forces on the deformation of the sand dunes are investigated by integrated methods,guiding the implementation of mitigating measures with significant ameliorative effects.Contrast to common sand control practices that aim to reduce wind speed and stop blown sands,our research highlights the importance of maintaining the natural wind flow field in stabilizing surrounding dunes.These mitigation measures consist of removing excessive vegetation and newly constructed buildings to recover the original wind flow field and sand transport activity.Such research and mitigation efforts ensure the scientific protection and restoration of the special desert landform,and contribute to the mutual enhancement of the conservation and exploitation of this desert scenic spot and similar sites.

Electromagnetic scattering of charged particles in a strong wind-blown sand electric field

Some field experimental results have shown that the moving sands or dust aerosols in nature are usually electrified,and those charged particles also produce a strong electric field in air, which is named as wind-blown sand electric field.Some scholars have pointed out that the net charge on the particle significantly enhances its electromagnetic(EM) extinction properties, but up to now, there is no conclusive research on the effect of the environmental electric field. Based on the extended Mie theory, the effect of the electric field in a sandstorm on the EM attenuation properties of the charged larger dust particle is studied. The numerical results indicate that the environmental electric field also has a great influence on the particle's optical properties, and the stronger the electric field, the bigger the effect. In addition, the charged angle, the charge density, and the particle radius all have a specific impact on the charged particle's optical properties.

Prevention and management of wind-blown sand damage along Qinghai-Tibet Railway in Cuonahu Lake area

This paper analyzes the characteristics of climate, geology and geomorphology, vegetation, and sand dune distribution in the Cuonahu Lake area beside the Qinghai-Tibet Railway. The types and causes of railway blown-sand hazards are discussed, and the effectiveness of various sand-controlling measures is assessed. From the perspective of integrated management, a sand-controlling system that combines several engineering measures, including nylon net sand barriers, concrete sand barriers, movable-board sand barriers, sand interception ditches, gravel/rock cover, film sandbags, and permanent vegetation is most beneficial.

Energy Consumption and Erosion Mechanism of Polyester Fiber Reinforced Cement Composite in Wind-blown Sand Environments

Considering the economic and environmental benefits associated with the recycling of polyester(PET)fibres,it is vital to study the application of fibre-reinforced cement composites.According to the characteristics of the wind-blown sand environment in Inner Mongolia,the erosion resistance of the polyester fibre-reinforced cement composites(PETFRCC)with different PET fibre contents to various erosion angles,velocities and sand particle flows was investigated by the gas-blast method.Based on the actual conditions of sandstorms in Inner Mongolia,the sand erosion parameters required for testing were calculated by the similarity theory.The elastic-plastic model and rigid plastic model of PETFRCC and cement mortar were established,and the energy consumption mechanism of the model under particle impact was analyzed.The experimental results indicate that the microstructure of PETFRCC rafter hydration causes a spring-like buffering effect,and the deformation of PETFRCC under the same impact load is slightly smaller than that of cement mortar,and the damage mechanism of PETFRCC is mainly characterized by fiber deformation and slight brittle spalling of matrix.And under the most unfavorable conditions of the erosion,the erosion rate of 0.5PETFRCC is about 57.69%lower than that of cement mortar,showing better erosion resistance.

Probability of rebound and eject of sand particles in wind-blown sand movement

When incident particles impact into a sand bed in wind-blown sand movement, rebound of the incident particles and eject of the sand particles by the incident particles affect directly the development of wind sand flux. In order to obtain rebound and eject lift-off probability of the sand particles, we apply the particle-bed stochastic collision model presented in our pervious works to derive analytic solutions of velocities of the incident and impacted particles in the postcollision bed. In order to describe randomness inherent in the real particle-bed collision, we take the incident angle, the impact position and the direction of resultant action of sand particles in sand bed on the impacted sand particle as ran- dom variables, and calculate the rebound and eject velocities, angles and coefficients （ratio of rebound and eject velocity to incident velocity）. Numerical results are found in accordance with current experimental results. The rebound and eject liftoff probabilities versus the incident and creeping velocities are predicted.

Zoning Analysis of Major Meteorological Disaster Risks in Xing'an League

According to the survey data of meteorological disasters in the counties and the ground meteorological observation data of Xing'an League,a disaster risk index assessment model based on Arc GIS 10.3 was established taking hazard factors,hazard inducing environment,hazard-bearing body and disaster prevention and reduction capability into account.According to the degree of influence of each assessment factor,the risk coefficients of three meteorological disasters,drought,sand wind and frost were calculated,and risk zoning was conducted for various meteorological disasters.The results showed that among the major meteorological disasters in Xing'an League,drought had the highest risk degree,followed by frost,and sand wind had the lowest risk degree.In Xing'an League,the areas with high drought risk are mostly located in Aershan City and in the northwest of Horqin Right Wing Front Banner;the high-risk areas of sand wind are located in the north of Jalaid Banner,in the northwest and southeast of Tuquan County,and in the central and southeastern parts of the Horqin Right Wing Middle Banner;and the eastern part of Ulanhot,the southeastern part of Jalaid Banner,the southeastern part of Horqin Right Wing Middle Banner and the central part of Horqin Right Wing Front Banner are highly threatened by frost.The analysis results can provide some reference for disaster prevention and reduction and meteorological decision making in the local areas.

Effects of different types of guardrails on sand transportation of desert highway pavement

Guardrail,an important highway traffic safety facility,is mainly used to prevent vehicles from accidentally driving off the road and to ensure driving safety.Desert highway guardrails hinder the movement of wind-blown sand,resulting in the decline of sand transportation by the pavement and the deposition of sand gains on the pavement,and endangering traffic safety.To reveal the influence of guardrails on sand transportation of desert highway pavement,we tested the flow field and sand transport volume distribution around the concrete,W-beam,and cable guardrails under different wind velocities through wind tunnel simulation.Wind velocity attenuation coefficients,sand transportation quantity,and sand transportation efficiency are used to measure sand transportation of highway pavement.The results show that the sand transportation of highway pavement was closely related to the zoning characteristics of flow field and variation of wind velocity around the guardrails.The flow field of the concrete guardrail was divided into deceleration,acceleration,and vortex zones.The interaction between the W-beam guardrail and wind-blown sand was similar to that of lower wind deflector.Behind and under the plates,there were the vortex zone and acceleration zone,respectively.The acceleration zone was conducive to transporting sand on the pavement.The cable guardrail only caused wind velocity variability within the height range of guardrail,and there was no sand deposition on the highway pavement.When the cable,W-beam,and concrete guardrails were used,the total transportation quantities on the highway pavement were 423.53,415.74,and 136.53 g/min,respectively,and sand transportation efficiencies were 99.31%,91.25%,and 12.84%,respectively.From the perspective of effective sand transportation on the pavement,the cable guardrail should be preferred as a desert highway guardrail,followed by the W-beam guardrail,and the concrete guardrail is unsuitable.The study results provide theoretical basis for the optimal design of desert highway guardrails and the prevention of wind-blown sand disasters on the highway pavement.

Wind tunnel test on the effect of metal net fences on sand flux in a Gobi Desert, China

The Lanzhou-Xinjiang High-speed Railway runs through an expansive windy area in a Gobi Desert, and sand-blocking fences were built to protect the railway from destruction by wind-blown sand. However, the shielding effect of the sand-blocking fence is below the expectation. In this study, effects of metal net fences with porosities of 0.5 and 0.7 were tested in a wind tunnel to determine the effectiveness of the employed two kinds of fences in reducing wind velocity and restraining wind-blown sand. Specifically, the horizontal wind velocities and sediment flux densities above the gravel surface were measured under different free-stream wind velocities for the following conditions： no fence at all, single fence with a porosity of 0.5, single fence with a porosity of 0.7, double fences with a porosity of 0.5, and double fences with a porosity of 0.7. Experimental results showed that the horizontal wind velocity was more significantly decreased by the fence with a porosity of 0.5, especially for the double fences. The horizontal wind velocity decreased approximately 65% at a distance of 3.25 m（i.e., 13 H, where H denotes the fence height） downwind the double fences, and no reverse flow or vortex was observed on the leeward side. The sediment flux density decreased exponentially with height above the gravel surface downwind in all tested fences. The reduction percentage of total sediment flux density was higher for the fence with a porosity of 0.5 than for the fence with a porosity of 0.7, especially for the double fences. Furthermore, the decreasing percentage of total sediment flux density decreased with increasing free-stream wind velocity. The results suggest that compared with metal net fence with a porosity of 0.7, the metal net fence with a porosity of 0.5 is more effective for controlling wind-blown sand in the expansive windy area where the Lanzhou-Xinjiang High-speed Railway runs through.

河流冲积平原饱和砂土区地下管线渗漏诱发地面塌陷机制研究

河流冲积平原区是我国城市建设的主要区域,地层以松散冲洪积物为主,该地区地下管网破损带走松散地层极易形成隐蔽性很高的地下空洞,进而诱发地面塌陷,威胁人身财产和基础设施安全。以安庆市长风路地面塌陷为例,建立渗流、应力多场可控的等比实体模型箱,开展城市地面塌陷仿真实验,分析带水管线破损后地层中孔洞发育过程及孔洞周边各个方向应力变化特征,旨在揭示地面塌陷形成机制。结果表明:(1)安庆市长风路地面塌陷从孕育到塌陷,经历了小孔、竖直孔洞、塌陷坑三种形态,可将地下异常孔洞当作前兆进行预警;(2)河流冲积平原区城市地面塌陷的孕灾环境是地层的高渗透性地层和地下水位,诱发因子是管道的破损,尤其是污水排水管道破损;(3)城市地面塌陷危害大小主要受控于管道及地下水位相对埋深,且可以根据地层性质对塌陷坑的大小进行计算评估。该成果可为城市地面塌陷风险评价、防治区划等提供理论基础。

Classification and regionalization of the forming environment of windblown sand disasters along the Tarim Desert Highway

Through the systematic field survey and observations, the factor quantification as well as setting the criteria, the sand disaster-forming environment along the Tarim Desert Highway can be divided into four grades by the classification and regionalization based on fuzzy mathematics. The length of the regions with significant sand disaster accounted for 37.1% of the total highway length. Particularly, the area along the Tarim Desert Highway, based on the sand disaster-forming environment classification as well as the difference in the five basic landform units along the highway, combined with the difference of wind regime, can be divided into five regions, in which the length of the regions suffering severe sand damage occupied 64.3% of the total highway length. In addition, the index of disaster formation grade along the highway decreased from north to south, showing a repeated spatial pattern in small length scales.

The blown sand disaster to the Tarim Desert Highway in Xinjiang, China

The Tarim Desert Highway in Xinjiang, China, the longest one in the world, has a lengthof 562 km, about 80% of which runs across, from north to south, the Taklimakan Desert. Obviously,the main problem of the road maintenance is the blown sand disaster. The research resultsshowed: (1) the physical environment along thedesert highway is characterized by strong winds,fine and loose ground materials, different dunes and so on, which provides the dynamical conditionand material source for the formation of blown sand disaster to the road and its shelter system.Meanwhile, the trend and cross-section of the road and the structure of the shelter system, asdamage objects, play important roles in the formation process of blown sand disaster; (2) theblown sand disaster to the shelter system is original from the intrusion of the drift sands and mobiledunes outside the shelter system, and the wind erosion and sand deposit caused by the air streamchanges on the ground in the shelter system. The main damage object in the Tarim Desert High-way is the shelter system presently. The damage forms include wind erosion, sand burying anddune covering; and (3) the damaged length of the blocking sand fences is 83.7%, 88.4%, 72.4%,72.8% and 40.3% and the damaged area of the straw checkerboard belts is 73.1%, 58.2%, 44.5%,35.4% and 36.6%, in turn, in 5 different landform units from north to south, and, the disasters tofences and the straw checkerboard belts are 79.5% and 57.6% in the compound dunes while theyare 64.6% and 37.7% in the interdunes respectively.

积石山Ms 6.2级地震区大沙沟泥土流灾害链成因分析

2023年12月18日23时59分,甘肃省积石山县发生Ms6.2级地震,最大地面加速度达到1.0 g。距震中20 km的青海省民和县中川乡大沙沟上游台地出现约15×10^(4)m^(2)液化陷落,活动水土体积约60×10^(4)m^(3),约45×10^(4)m^(3)侧流进入沟道,自北向南顺沟冲击形成灾害链,在草滩—金田村堆积约30×10^(4)m^(3),造成20人遇难。笔者等采用现场调查访问、卫星遥感和无人机图像解译、含水量测定、分析描述和量化计算等方法,对泥土流灾害链的形成因素、动力学机理和运动特征等进行了研究。大沙沟泥土流灾害链分布长度约3.1 km,可以划分为土体液化流失区、泥土流壅堵回淤区、路基堵溃冲击区、泥土堆积压埋区和泥水漫流区五部分,从上游到下游依次造成耕地损毁、电塔倒塌、灌渠破坏、摧毁村路、埋压乡道、压埋人员房屋和淤埋黄河引水灌渠等。泥土流具有过渡性三元分层结构,包括底部的冰水层、中间泥流层和上部的湿土层。液化土体从启动进入沟道到金田村被埋压的运动时间不足10 min,泥土流启动到美一村路基堵溃的时间约为4.38 min,到达到草滩村牌坊的时间约为6.15 min,在随后的3.50 min内酿成了草滩—金田村灾难。泥土流灾害链的形成是地质、水源、动力、地形和承灾体等诸多因素遭遇叠加的结果,包括厚层粉砂土、高位地下水、强烈的地震动、平缓地形倾向沟谷出口、路基阻挡蓄能溃决和沿途遭遇多处承灾体等要素。泥土流在平缓沟道实现远程运动的动力学效应包括启动区土体液化、入沟“闸门”束流、跨沟路基堵溃、沟道冰水润滑、水土“列车”接续入村堆积和灾民地震应激惊恐等多种效应的接续传递、叠加耦合。农村社区建于大沙沟冲积滩地上,无形中增大了成灾风险和自主防范的难度。笔者等提出的防范对策包括开展防灾减灾培训、农田灌溉改为渗灌滴灌、民居选址建设避开河沟洪泛冲积滩地、疏浚河道拓宽过流断面和上游开展水土保持等。

智能放顶煤技术在特厚煤层上覆含水层保护中的应用

我国内蒙古东部和新疆北部草原地区煤炭及地下水资源丰富,煤矿高强度开采形成的采动裂隙易导通强富水含水层,极易引起上覆岩层的地下水系统破坏,更容易发生突水溃砂事故,尤其含水层下综合机械化放顶煤开采的放煤高度难以控制。以特厚煤层上覆含水层系统保护为研究对象,以含水层保护和水砂灾害安全防控为研究目标,研发特厚煤层上覆含水层保护的智能放顶煤关键技术,应用井工煤矿动力突水溃砂防控技术,得出特厚煤层上覆地下水系统保护的根本途径。研发应用一种智能放顶煤技术,包括顶煤运移跟踪系统、多轮记忆放煤方法及系统。基于水文地质条件精细探查、覆岩破坏高度的实测、顶煤采放高度确定,应用多轮记忆放煤智能放顶煤技术,控制采动裂隙带高度。以应用工作面为例,应用水文地质精细探查与钻探验证、覆岩破坏高度获取、智能放顶煤技术后,在工作面回采过程中实现了上覆含水层水砂灾害的安全精准控制,有效保护了煤层上覆强富水含水层。