Wind-induced internal pressure response for structure with single windward opening and background leakage

Theoretical analysis and wind tunnel tests were carried out to study wind-induced intemal pressure response for the structure with single windward opening and background leakage. Its goveming differential equation was derived by the Bemoulli equation in an unsteady-isentropic form. Numerical examples were provided to study the additive damping caused by background leakage in laminar and turbulent flow, and the influence of background leakage on fluctuating internal pressure response was quantized. A series of models for low-rise building with various opening ratios and background leakage were designed and wind tunnel tests were conducted. It is shown that the fluctuating intemal pressure reduces when the background leakage are considered and that the effect of background leakage can be predicted accurately by the governing differential equation deduced in this paper.

Responses of wind-induced internal pressure in a two-compartment building with a dominant opening and background porosity Part 1:Theoretical formulation and experimental verification

The equations governing wind-induced internal pressure responses for a two-compartment building with a dominant opening and background porosity were derived.The unsteady form of the Bernoulli equation,the law of mass conservation,and adiabatic equation were used for the derivation.The precision of the governing equations was verified by a wind tunnel test on a rigid model of a low-rise building.The results show that the governing equations can effectively analyze the wind-induced internal pressure responses.The internal pressure responses in both compartments are suppressed due to the additional damping provided by background porosity.The responses of internal pressure in both compartments,especially in the compartment without an external opening,decrease with increased lumped leakage area.

Wind-induced internal pressure fluctuations of structure with single windward opening

A frequency domain method for estimating wind-induced fluctuating internal pressure of structure with single windward opening is presented in this paper and wind tunnel tests were carried out to verify the theory. The nonlinear differential equation of internal pressure dynamics and iteration algorithm were applied to calculate fluctuating internal pressure and time domain analysis was used to verify the accuracy of the proposed method. A simplified estimation method is also provided and its scope of application is clarified. The mechanism of internal pressure fluctuation is obtained by using the proposed method in the frequency domain and a new equivalent opening ratio is defined to evaluate internal pressure fluctuation. A series of low-rise building models with various openings and internal volumes were designed for wind tunnel tests with results agreeing well with analytical results. It is shown that the proposed frequency domain method based on Gaussian distribution of internal pressure fluctuations can be applied to predict the RMS internal pressure coefficient with adequate accuracy for any opening dimensions, while the simplified method can only be used for structure with single dominant opening. Helmholtz resonance is likely to occur when the equivalent opening ratio is adequately high, and controlling individual opening dimension is an effective strategy for avoiding Helmholtz resonance in engineering.

Data-driven modeling on anisotropic mechanical behavior of brain tissue with internal pressure

Brain tissue is one of the softest parts of the human body,composed of white matter and grey matter.The mechanical behavior of the brain tissue plays an essential role in regulating brain morphology and brain function.Besides,traumatic brain injury(TBI)and various brain diseases are also greatly influenced by the brain's mechanical properties.Whether white matter or grey matter,brain tissue contains multiscale structures composed of neurons,glial cells,fibers,blood vessels,etc.,each with different mechanical properties.As such,brain tissue exhibits complex mechanical behavior,usually with strong nonlinearity,heterogeneity,and directional dependence.Building a constitutive law for multiscale brain tissue using traditional function-based approaches can be very challenging.Instead,this paper proposes a data-driven approach to establish the desired mechanical model of brain tissue.We focus on blood vessels with internal pressure embedded in a white or grey matter matrix material to demonstrate our approach.The matrix is described by an isotropic or anisotropic nonlinear elastic model.A representative unit cell(RUC)with blood vessels is built,which is used to generate the stress-strain data under different internal blood pressure and various proportional displacement loading paths.The generated stress-strain data is then used to train a mechanical law using artificial neural networks to predict the macroscopic mechanical response of brain tissue under different internal pressures.Finally,the trained material model is implemented into finite element software to predict the mechanical behavior of a whole brain under intracranial pressure and distributed body forces.Compared with a direct numerical simulation that employs a reference material model,our proposed approach greatly reduces the computational cost and improves modeling efficiency.The predictions made by our trained model demonstrate sufficient accuracy.Specifically,we find that the level of internal blood pressure can greatly influence stress distribution and determine the possible related damage behaviors.

Seeing beneath the surface:Harnessing point-of-care ultrasound for internal jugular vein evaluation

Point-of-care ultrasound(POCUS)of the internal jugular vein(IJV)offers a noninvasive means of estimating right atrial pressure(RAP),especially in cases where the inferior vena cava is inaccessible or unreliable due to conditions such as liver disease or abdominal surgery.While many clinicians are familiar with visually assessing jugular venous pressure through the internal jugular vein,this method lacks sensitivity.The utilization of POCUS significantly enhances the visualization of the vein,leading to a more accurate identification.It has been demonstrated that combining IJV POCUS with physical examination enhances the specificity of RAP estimation.This review aims to provide a comprehensive summary of the various sonographic techniques available for estimating RAP from the internal jugular vein,drawing upon existing data.

Ultrasound based estimate of central venous pressure:Are we any closer?

Central venous pressure(CVP)serves as a direct approximation of right atrial pressure and is influenced by factors like total blood volume,venous compliance,cardiac output,and orthostasis.Normal CVP falls within 8-12 mmHg but varies with volume status and venous compliance.Monitoring and managing disturbances in CVP are vital in patients with circulatory shock or fluid disturbances.Elevated CVP can lead to fluid accumulation in the interstitial space,impairing venous return and reducing cardiac preload.While pulmonary artery catheterization and central venous catheter obtained measurements are considered to be more accurate,they carry risk of complications and their usage has not shown clinical improvement.Ultrasound-based assessment of the internal jugular vein(IJV)offers real-time,non-invasive measurement of static and dynamic parameters for estimating CVP.IJV parameters,including diameter and ratio,has demonstrated good correlation with CVP.Despite significant advancements in non-invasive CVP measurement,a reliable tool is yet to be found.Present methods can offer reasonable guidance in assessing CVP,provided their limitations are acknowledged.

Formability and strengthening mechanism of AA6061 tubular components under solid granule medium internal high pressure forming

A new technological process of tube forming was developed, namely solution treatment → granule medium internal high pressure forming → artificial aging. During this process, the mechanical properties of AA6061 tube can be adjusted by heat treatment to satisfy the process requirements and the processing method can also be realized by granule medium internal high pressure forming technology with the features of convenient implementation, low requirement to equipment and flexible design in product. Results show that, at a solution temperature of 560 ℃ and time of 120 min, the elongation of AA6061 increases by 313%, but the strength and the hardness dramatically decrease. At an aging temperature of 180 ℃ and time of 360 min, the strength and hardness of AA6061 alloy are recovered to the values of the as-received alloy. The maximum expansion ratio（MER） of AA6061 tube increases by 25.5% and the material properties of formed tube reach the performances of raw material.

Measuring the Internal Velocity of Debris Flows Using Impact Pressure Detecting in the Flume Experiment

Measuring the internal velocity of debris flows is very important for debris flow dynamics research and designing debris flow control works. However, there is no appropriate method for measuring the internal velocity because of the destructive power of debris flow process. In this paper, we address this problem by using the relationship between velocity and kinetic pressure, as described by surface velocity and surface kinetic pressure data. Kinetic pressure is the difference of impact pressure and static pressure. The former is detected by force sensors installed in the flow direction at the sampling section. Observations show that static pressure can be computed using the formula for static water pressure by simply substituting water density for debris flow density. We describe the relationship between surface velocity and surface kinetic pressure using data from seven laboratory flume experiments. It is consistent with the relationship for single phase flow, which is the measurement principle of the Pitot tube.

Heat treatment and granule medium internal highpressure forming of AA6061 tube

The new forming process of AA6061 alloy tube, including solution treatment, granule medium internal high-pressure forming and aging treatment, was developed. The AA6061 alloy tube via heat treatment satisfied the forming requirement, and the granule medium internal high pressure forming method for AA6061 alloy tube was also realized by using convenient implementation with low requirement of equipment and flexible design of product. At a solution temperature of 560℃ and time of 120 min, the elongation of the AA6061 extruded tube increases by 300% and the strength and the hardness dramatically decrease too. Therefore, the AA6061 alloy tube meets the requirement of internal high-pressure forming because of the improvement of formability. The experiments shows that the strength and hardness of AA6061 alloy workpiece recover to that of the as-received alloy at an aging temperature of 180℃ and time of 360 min, and the strength of AA6061 alloy workpiece is equal to the base alloy. The typical parts of convex ring tube, stepped shaft tube and hexagonal tube were successfully produced in lab by using the present forming method. The forming tests show that the maximum expansion ratio(MER) of the AA6061 extruded tube increases by 25.5% and the material properties of formed AA6061 alloy tube reached the performance of as-received alloy.

Analysis of the Internal Pressure in Tube Hydroforming and Its Experimental Investigation

The internal pressure of the process was studied theoretically and experimentally. The external load character and internal stress character of tube hydroforming were discussed first. Then, according to the characters, the function and classification of internal pressure were presented in general. Base on the stress analysis, its effect on the yield criterion and calculation formula were also researched and derived. To verify the correction of the theoretical analysis and derived formula, experiments with different internal pressures were carried out and the result was compared and discussed. It demonstrates that internal pressure plays an important role in tube hydroforming and theory and formula discussed and derived by this paper are feasible in practice.

Effect of internal pressure on strength of hydraulically expanded joints

To analyze the effect of internal pressure on the connection strength of hydraulically expanded joints,a hydraulic expanding and push-out process of a joint of tube to sleeve was simulated by using FEM and validated by experiments at various internal pressure values.The stress and residual stress in the joined pair during the joining process illustrates that the contact pressure on the interface is not uniform along the longitudinal direction.The research reveals that if the sleeve does not experience any plastic deformation,the connection strength increases with the internal pressure linearly.For sleeve material with yield point elongation,if the sleeve experiences some degree of plastic deformation,there is an internal pressure interval in which the connection strength decreases slightly as internal pressure increases.Therefore,the internal pressure should be controlled depending on the deformation of the sleeve,but not as high as possible.The simulated results are in good agreement with those from experiments.

Data-driven Methods to Predict the Burst Strength of Corroded Line Pipelines Subjected to Internal Pressure

A corrosion defect is recognized as one of the most severe phenomena for high-pressure pipelines,especially those served for a long time.Finite-element method and empirical formulas are thereby used for the strength prediction of such pipes with corrosion.However,it is time-consuming for finite-element method and there is a limited application range by using empirical formulas.In order to improve the prediction of strength,this paper investigates the burst pressure of line pipelines with a single corrosion defect subjected to internal pressure based on data-driven methods.Three supervised ML(machine learning)algorithms,including the ANN(artificial neural network),the SVM(support vector machine)and the LR(linear regression),are deployed to train models based on experimental data.Data analysis is first conducted to determine proper pipe features for training.Hyperparameter tuning to control the learning process is then performed to fit the best strength models for corroded pipelines.Among all the proposed data-driven models,the ANN model with three neural layers has the highest training accuracy,but also presents the largest variance.The SVM model provides both high training accuracy and high validation accuracy.The LR model has the best performance in terms of generalization ability.These models can be served as surrogate models by transfer learning with new coming data in future research,facilitating a sustainable and intelligent decision-making of corroded pipelines.

Mechanical effects of circular liquid inclusions inside soft matrix:role of internal pressure change and surface tension

The mechanical effects of dilute liquid inclusions on the solid-liquid composite are explored,based on an analytical circular inclusion model incorporating the internal pressure change of the liquid and the surface tension of the interface.Several simple explicit dependences of the stress field and effective stiffness on the bulk modulus and the size of the liquid,the surface tension,and Poisson’s ratio of the matrix are derived.The results show that the stresses in the matrix are reduced,and the stiffness of the solid-liquid composite is enhanced with the consideration of either the surface tension or the internal pressure change.Particularly,the effective Young’s modulus predicted by the present model for either soft or stiff matrices agrees well with the known experimental data.In addition,according to the theoretical results,it is possible to stiffen a soft solid by pressured gas with the presence of the surface tension of the solid-gas interface.

Preliminary Study on the Linear Relationship between the Internal Pressure Head of Rubber Dam Bags and Real-time Dam Height

The design operating conditions of rubber dams were analyzed,and it is found that the operating conditions are similar to the actual operating conditions of changes in the internal pressure ratio of a specific rubber dam bag in the process of filling and draining. Based on this,the linear relationship curve between the internal pressure head H0 and the real-time dam height H and its approximate analytical formula can be obtained,which can be used as a supplement and correction method for the measurement method of real-time dam height during rubber dam operation,and provides reference for rubber dam project managers.

INTERNAL PRESSURE AND SOLUBILITY PARAMETER FOR LIQUIDS

Based on a modified van der Waals model, in which the excluded volume is expressed as a linear function of density, the internal pressure and the physical contribution of two - dimensional solubility parameter suggested by Bagley et al. can be expressed as functions of density and a size dependent parameter A. A group contribution method for estimating parameter A and then the solubility parameter has been developed. Average relative deviation of the predicted solubility parameters in comparison will the experimental values for more than sixty liquids including non- polar and polar species as well as those with strong hydrogen bonding is 0.8%. Further correlation with topological indices of molecules makes this method applicable to various isomers of saturated alkanes. Average relative deviation of prediction for 34 saturated alkanes is only 0.6%.

PREDICTION OF THERMAL PRESSURE COEFFICIENTS AND INTERNAL PRESSURE IN BINARY LIQUID MIXTURES

1 INTRODUCTIONThe internal pressure of liquids plays an important role in study on liquids and solu-tions.Internal pressure may serve as a measurement for the intermolecular force.Furthermore,internal pressure is capable of giving indications on entropy changes withthe changes in volume during mixing,as can be seen from the following thermodynamicrelationship:

Numerical evaluation of an autofrettaged thick-walled cylinder under dynamically applied axially non-uniform internal service pressure distribution

A dynamical moving pressure structural numerical calculation model using the internal ballistics calculation pressure-time results was constituted and the vicinity of the internal ballistics and quasiinternal ballistics structural model was checked. The Von Mises stresses obtained by the dynamical structural numerical model calculations and the Von Mises stresses calculated from the shot test strain measurements were compared. The difference for the worse case was 20% and for the best case was 0.1%.Furthermore, the model gave better agreement for the higher charge masses. The numerical structural quasi-internal ballistics computation model created was verified for the top charge mass which represents the highest stress condition and used in a gun barrel design.

Suppressing secondary reactions of coal pyrolysis by reducing pressure and mounting internals in fixed-bed reactor

Pyrolysis of Shenmu coal was performed in fixed-bed reactors indirectly heated by reducing operating pressure and mounting internals in the reactor to explore their synergetic effects on coal pyrolysis. Mounting internals particularly designed greatly improved the heat transfer inside coal bed and raised the yield of tar production.Reducing pressure further facilitated the production of tar through its suppression of secondary reactions occurring in the reactor. The absolute increase in tar yield reached 3.33 wt% in comparison with the pyrolysis in the reactor without internals under atmospheric pressure. The obtained tar yield in the reactor with internals under reduced pressure was even higher than the yield of Gray–King assay. Through experiments in a laboratory fixed bed reactor, it was also clarified that the effect of reducing pressure is related to volatile release rate in pyrolysis. It did not obviously vary tar yield at pyrolysis temperatures below 600 ℃, while the effect was evident at 650 and 700 ℃ but became limited again above 800 ℃. Under reduced pressure the produced tar contained more aliphatics and phenols but less aromatics.

Mechanical instability of veins under internal pressure

Introduction Tortuous veins are often seen in the retina,cerebrum,and human legs. Venous tortuosity may affect blood flow and the wall remodeling process,both of which are associated with venous diseases. It has been shown that tortuous or vari-

STRESS ANALYSIS OF THICK RING SHELL SUBMITTED TO THE ACTION OF INTERNAL PRESSURE

In this paper. from asymptotic equations of thicking shell obtained on the basis of the equations of three dimensional elastic mechanics using geometric small parameter we find the solutions of the stresses and the deformations of thick ring shell submitted to the action of internal pressure q.