Modelling a Learning-Based Dynamic Tree Routing Model for Wireless Mesh Access Networks

Link asymmetry in wireless mesh access networks(WMAN)of Mobile ad-hoc Networks(MANETs)is due mesh routers’transmission range.It is depicted as significant research challenges that pose during the design of network protocol in wireless networks.Based on the extensive review,it is noted that the substantial link percentage is symmetric,i.e.,many links are unidirectional.It is identified that the synchronous acknowledgement reliability is higher than the asynchronous message.Therefore,the process of establishing bidirectional link quality through asynchronous beacons underrates the link reliability of asym-metric links.It paves the way to exploit an investigation on asymmetric links to enhance network functions through link estimation.Here,a novel Learning-based Dynamic Tree routing(LDTR)model is proposed to improve network performance and delay.For the evaluation of delay measures,asymmetric link,interference,probability of transmission failure is evaluated.The proportion of energy consumed is used for monitoring energy conditions based on the total energy capacity.This learning model is a productive way for resolving the routing issues over the network model during uncertainty.The asymmetric path is chosen to achieve exploitation and exploration iteratively.The learning-based Dynamic Tree routing model is utilized to resolve the multi-objective routing problem.Here,the simulation is done with MATLAB 2020a simulation environment and path with energy-efficiency and lesser E2E delay is evaluated and compared with existing approaches like the Dyna-Q-network model(DQN),asymmetric MAC model(AMAC),and cooperative asymmetric MAC model(CAMAC)model.The simulation outcomes demonstrate that the anticipated LDTR model attains superior network performance compared to others.The average energy consump-tion is 250 J,packet energy consumption is 6.5 J,PRR is 50 bits/sec,95%PDR,average delay percentage is 20%.

Traffic-aware static channel assignment algorithm in wireless mesh networks

A channel assignment algorithm with awareness of link traffic is proposed in multi-radio multi-channel wireless mesh networks. First, the physical interference model based on the signal-to-interference-plus-noise ratio and successful transmission condition is described. The model is more suitable for a wireless communication environment than other existing models. Secondly, a pure integer quadratic programming （PIQP） model is used to solve the channel assignment problem and improve the capacity of wireless mesh networks. Consequently, a traffic- aware static channel assignment algorithm（TASC） is designed. The algorithm adopts some network parameters, including the network connectivity, the limitation of the number of radios and the successful transmission conditions in wireless communications. The TASC algorithm can diminish network interference and increase the efficiency of channel assignment while keeping the connectivity of the network. Finally, the feasibility and effectivity of the channel assignment solution are illustrated by the simulation results. Compared witb similar algorithms, the proposed algorithm can increase the capacity of WMNs.

Distribution algorithm of entangled particles for wireless quantum communication mesh networks

With ensured network connectivity in quantum channels, the issue of distributing entangled particles in wireless quantum communication mesh networks can be equivalently regarded as a problem of quantum backbone nodes selection in order to save cost and reduce complexity. A minimum spanning tree（ MST）-based quantum distribution algorithm（ QDMST） is presented to construct the mesh backbone network. First, the articulation points are found,and for each connected block uncovered by the articulation points, the general centers are solved. Then, both articulation points and general centers are classified as backbone nodes and an M ST is formed. The quantum path between every two neighbor nodes on the MST is calculated. The nodes on these paths are also classified as backbone nodes. Simulation results validate the advantages of QDMST in the average backbone nodes number and average quantum channel distance compared to the existing random selection algorithm under multiple network scenarios.

软件定义无线Mesh网络多目标路由优化算法

无线Mesh网络(Wireless Mesh network, WMN)中,链路拥塞会导致较长的传输时延和排队时间,因此将链路负载均衡与服务质量结合起来一直是研究热点.本文针对多目标路由优化管理的关键问题,将路由问题表述为整数线性规划(Integer linear programming, ILP)模型,并将无线Mesh网络与软件定义网络(Software defined network, SDN)结合,设计了适应于SD-WMN架构的多目标函数、约束条件以及整体的网络优化模型,此外,由于该整数线性规划模型是NP完全的,本文将改进的人工蜂群的启发式优化算法引入到路由优化算法中,以获得源节点和目的节点之间传输流量的理想路径.本文所提出方法在Mininet网络模拟工具中的仿真结果证明了该算法的有效性,与OSPF、SDNR以及遗传蚁群优化(G-ACO)相比,所提出方法在丢包率、往返时间和负载均衡方面均有不错的改善.

SLCRM： Subjective Logic-Based Cross-Layer Reputation Mechanism for Wireless Mesh Networks

Wireless Mesh Networks （WMNs） are vulnerable to various security threats because of their special infrastructure and communication mode, wherein insider attacks are the most challenging issue. To address this problem and protect innocent users from malicious attacks, it is important to encourage cooperation and deter malicious behaviors. Reputation systems constitute a major category of techniques used for managing trust in distributed networks, and they are effective in characterizing and quantifying a node＇s behavior for WMNs. However, conventional layered reputation mechanisms ignore several key factors of reputation in other layers; therefore, they cannot provide optimal performance and accurate malicious node identification and isolation for WMNs. In this paper, we propose a novel dynamic reputation mechanism, SLCRM, which couples reputation systems with a cross-layer design and node-security-rating classification techniques to dynamically detect and restrict insider attacks. Simulation results show that in terms of network throughput, packet delivery ratio, malicious nodes＇ identification, and success rates, SI_CRM imple- ments security protection against insider attacks in a more dynamic, effective, and efficient manner than the subjective logic and uncertainty-based reputation model and the familiarity-based reputation model.

Towards an Artificial Immune System for Detecting Anomalies in Wireless Mesh Networks

This paper focuses on investigating immunological principles in designing a multi-agent security architecture for intrusion detection and response in wireless mesh networks.In this approach,the immunity-based agents monitor the situation in the network.These agents can take appropriate actions according to the underlying security policies.Specifically,their activities are coordinated in a hierarchical fashion while sensing,communicating,determining and generating responses.Such an agent can learn about and adapt to its environment dynamically and can detect both known and unknown intrusions.The proposed intrusion detection architecture is designed to be flexible,extendible,and adaptable so that it can perform real-time monitoring.This paper provides the conceptual view and a general framework of the proposed system.In the end,the architecture is illustrated by an example and by simulation to show it can prevent attacks efficiently.

Error resilient concurrent video streaming over wireless mesh networks

In this paper, we propose a multi-source multi-path video streaming system for supporting high quality concurrent video-on-demand (VoD) services over wireless mesh networks (WMNs), and leverage forward error correction to enhance the error resilience of the system. By taking wireless interference into consideration, we present a more realistic networking model to capture the characteristics of WMNs and then design a route selection scheme using a joint rate/interference-distortion optimiza- tion framework to help the system optimally select concurrent streaming paths. We mathematically formulate such a route selec- tion problem, and solve it heuristically using genetic algorithm. Simulation results demonstrate the effectiveness of our proposed scheme.

Intrusion Detection for Wireless Mesh Networks using Finite State Machine

Wireless Mesh Networks is vulnerable to attacks due to the open medium, dynamically changing network topology, cooperative algorithms, Lack of centralized monitoring and management point. The traditional way of protecting networks with firewalls and encryption software is no longer suffi- cient and effective for those features. In this paper, we propose a distributed intrusion detection ap- proach based on timed automata. A cluster-based detection scheme is presented, where periodically a node is elected as the monitor node for a cluster. These monitor nodes can not only make local intrusion detection decisions, but also cooperatively take part in global intrusion detection. And then we con- struct the Finite State Machine （FSM） by the way of manually abstracting the correct behaviors of the node according to the routing protocol of Dynamic Source Routing （DSR）. The monitor nodes can verify every node＇s behavior by the Finite State Ma- chine （FSM）, and validly detect real-time attacks without signatures of intrusion or trained data.Compared with the architecture where each node is its own IDS agent, our approach is much more efficient while maintaining the same level of effectiveness. Finally, we evaluate the intrusion detection method through simulation experiments.

Tree-Based Proactive Routing Protocol for Wireless Mesh Network

Wireless Mesh Network （WMN） is seen as an effective Intemet access solution for dynamic wireless applications. For the low mobility of mesh routers in WMN, the backbone topography can be effectively maintained by proactive routing protocol. Pre-proposals like Tree Based Routing （TBR） protocol and Root Driven Routing （RDR） protocol are so centralized that they make the gateway becorre a bottleneck which severely restricts the network performance. We proposed an Optimized Tree-based Routing （OTR） protocol that logically separated the proactive tree into pieces. Route is partly computed by the branches instead of root. We also discussed the operation of multipie Intemet gateways which is a main issue in WMN. The new proposal lightens the load in root, reduces the overhead and improves the throughput. Numerical analysis and simulation results confirm that the perforrmnce of WMN is improved and OTR is more suitable for large scale WMN.

Multi-path based secure communication in wireless mesh networks

Communication security is a critical aspect of QoS provisioning in wireless mesh network （WMN）. Because of the inherent characteristics of WMN, conventional security mechanisms cannot be applied. In order to guarantee the communication security, a novel communication security mechanism is proposed. The mechanism uses a communication encryption scheme to encrypt data packets and employs a risk avoidance scheme to avoid the malicious nodes during communications. Simulation results indicate that the mechanism is able to provide secure communication effectively and reduce the damage of attacks through multiple paths.

Gateways Placement in Backbone Wireless Mesh Networks

This paper presents a novel algorithm for the gateway placement problem in Backbone Wireless Mesh Networks (BWMNs). Different from existing algorithms, the new algorithm incrementally identifies gateways and assigns mesh routers to identified gateways. The new algorithm can guarantee to find a feasible gateway placement satisfying Quality-of-Service (QoS) constraints, including delay constraint, relay load constraint and gateway capacity constraint. Experimental results show that its performance is as good as that of the best of existing algorithms for the gateway placement problem. But, the new algorithm can be used for BWMNs that do not form one connected component, and it is easy to implement and use.

Evaluation of Energy Consumption of Proactive, Reactive, and Hybrid Routing Protocols in Wireless Mesh Networks Using 802.11 Standards

This paper provides a deep evaluation of the energy consumption of routing protocols. The evaluation is done along with other metrics such as throughput and packet delivery ratio (PDR). We introduce two more metrics to capture the efficiency of the energy consumption: e-throughput and e-PDR. Both are ratios in relation to the energy. We consider the three low layers of the stack. Three types of routing protocols are used: proactive, reactive, and hybrid. At the MAC and PHY layer, three radio types are considered: 802.11a/b/g. Finally, the number of nodes is varying in random topologies, with nodes being static or mobile. Simulations are conducted using NS3. The parameters of a real network interface card are used. From the results in mobile position scenarios, no protocol is outperforming the others;even if OLSR has the lowest energy consumption, most of the time. However, in constant position scenarios, AODV consumed a lower energy, apart from the scenarios using the 802.11a standard where HWMP energy consumption is the lowest. Regarding the energy efficiency, AODV protocols provided the best e-throughput and OLSR the best e-PDR in overall configurations. A framework for selecting energy-efficient routing protocol depending on network characteristics is proposed at the end.

Centralized Quasi-Static Channel Assignment for Multi-Radio Multi-Channel Wireless Mesh Networks

Employing multiple channels in wireless multihop networks is regarded as an effective approach to increas-ing network capacity. This paper presents a centralized quasi-static channel assignment for multi-radio multi-channel Wireless Mesh Networks (WMNs). The proposed channel assignment can efficiently utilize multiple channels with only 2 radios equipped on each mesh router. In the scheme, the network end-to-end traffics are first modeled by probing data at wireless access points, and then the traffic load between each pair of neighboring routers is further estimated using an interference-aware estimation algorithm. Having knowledge of the expected link load, the scheme assigns channels to each radio with the objective of mini-mizing network interference, which as a result greatly improves network capacity. The performance evalua-tion shows that the proposed scheme is highly responsive to varying traffic conditions, and the network per-formance under the channel assignment significantly outperforms the single-radio IEEE 802.11 network as well as the 2-radio WMN with static 2 channels.

Wireless Mesh Networks and Cooperative Relaying Technologies

The Wireless Mesh Network (WMN) has become a focus in research of wireless broadband communications . In a switching technologies - based wireless Mesh network, the entire network is regarded as an IP subnet, so it cannot be applied in situations where large coverage is required . The use of cooperative relaying technologies can improve the transmission rate and reliability of wireless link; while the wireless Mesh network, once integrated with cooperative relaying technologies and routing technologies , can improve its spectrum efficiency and cover a wide area . However, there are many problems to be solved with respect to standardization, key technologies research and industrialization. Therefore , the application of cooperative relaying technologies in wireless Mesh networks is still a great challenge .

Survivable Routing Protocol for Green Wireless Mesh Networks Based on Energy Efficiency

This paper proposes a new Energyefficient Survivable Routing Protocol(ESRP)based on solar energy and wind mixed for power supply in green wireless mesh networks(WMNs).The ESRP combines hop penalty strategy and flooding delaying strategy to improve the performances of traditional routing protocol.This paper uses QualNet to simulate and verify the performances of proposed ESRP.Compared with the traditional routing protocol,the simulation results show that the energy utilization of ESRP is more efficient by 13%.At the same time,ESRP is more load-balanced to postpone the appearance of the first energy depletion node and reduce the number of energy depletion nodes,and thus it effectively improves network survivability.

Incorporating Network Coding into TCP Grounded on Network Utility Maximization in Multi-Radio Multi-Channel Wireless Mesh Networks

A new approach, named TCP-I2NC, is proposed to improve the interaction between network coding and TCP and to maximize the network utility in interference-free multi-radio multi-channel wireless mesh networks. It is grounded on a Network Utility Maxmization (NUM) formulation which can be decomposed into a rate control problem and a packet scheduling problem. The solutions to these two problems perform resource allocation among different flows. Simulations demonstrate that TCP-I2NC results in a significant throughput gain and a small delay jitter. Network resource is fairly allocated via the solution to the NUM problem and the whole system also runs stably. Moreover, TCP-I2NC is compatible with traditional TCP variants.

A TRUST MECHANISM-BASED CHANNEL ASSIGNMENT AND ROUTING SCHEME IN COGNITIVE WIRELESS MESH NETWORKS WITH INTRUSION DETECTION

Cognitive Wireless Mesh Networks(CWMN) is a novel wireless network which combines the advantage of Cognitive Radio(CR) and wireless mesh networks.CWMN can realize seamless in-tegration of heterogeneous wireless networks and achieve better radio resource utilization.However,it is particularly vulnerable due to its features of open medium,dynamic spectrum,dynamic topology,and multi-top routing,etc..Being a dynamic positive security strategy,intrusion detection can provide powerful safeguard to CWMN.In this paper,we introduce trust mechanism into CWMN with intrusion detection and present a trust establishment model based on intrusion detection.Node trust degree and the trust degree of data transmission channels between nodes are defined and an algorithm of calcu-lating trust degree is given based on distributed detection of attack to networks.A channel assignment and routing scheme is proposed,in which selects the trusted nodes and allocates data channel with high trust degree for the transmission between neighbor nodes to establish a trusted route.Simulation re-sults indicate that the scheme can vary channel allocation and routing dynamically according to network security state so as to avoid suspect nodes and unsafe channels,and improve the packet safe delivery fraction effectively.

Design and analysis of intrusion detection systems for wireless mesh networks

Intrusion is any unwanted activity that can disrupt the normal functions of wired or wireless networks. Wireless mesh networking technology has been pivotal in providing an affordable means to deploy a network and allow omnipresent access to users on the Internet. A multitude of emerging public services rely on the widespread, high-speed, and inexpensive connectivity provided by such networks. The absence of a centralized network infrastructure and open shared medium makes WMNs particularly susceptible to malevolent attacks, especially in multihop networks. Hence, it is becoming increasingly important to ensure privacy, security, and resilience when designing such networks. An effective method to detect possible internal and external attack vectors is to use an intrusion detection system. Although many Intrusion Detection Systems (IDSs) were proposed for Wireless Mesh Networks (WMNs), they can only detect intrusions in a particular layer. Because WMNs are vulnerable to multilayer security attacks, a cross-layer IDS are required to detect and respond to such attacks. In this study, we analyzed cross-layer IDS options in WMN environments. The main objective was to understand how such schemes detect security attacks at several OSI layers. The suggested IDS is verified in many scenarios, and the experimental results show its efficiency.

Scalability Technologies for Wireless Mesh Networks

The continuous increase of data transmission density in wireless mobile communications has posed a challenge to the system performance of Wireless Mesh Networks (WMNs ). There is a rule for wireless Ad hoc networks that the average node capacity decreases while the number of nodes increases , so it is hard to establish a large - scale wireless Mesh network. Network scalability is very important for enhancing the adaptive networking capability of the wireless Mesh network. This article discusses key scalability technologies for Mesh Base Stations (BSs ) and Mesh Mobile Stations (MSs ), such as channel allocation, intelligent routing , multi- antenna , node classification, Quality of Service (QoS) differentiation and cooperative transmission.

Wireless Mesh Network and IEEE 802 Standards

Although the wireless broadband access system is developing rapidly, its development is limited due to some disadvantages , such as small capacity of bandwidth and small coverage . The Wireless Mesh Network (WMN) is one of the important technologies for 'last mile 'broadband wireless access . The WMN can integrate with multiple wireless systems , such as Wireless Local Area Network (WLAN), Wireless Personal Area Network (WPAN), and Wireless Metropolitan Area Network (WMAN), to improve the performance of the wireless network and enlarge the coverage range . With the wide applications of the WMN, the IEEE 802 standard group is devoted to promoting the development of the WMN technology and establishing the related technical standards . At present, WMN standards have appeared in IEEE 802.11s , 802.15, 802.16, and 802.20.