Jamming Assisted Covert Wireless Communication in Multi-Channel Systems

This paper investigates the jammerassisted multi-channel covert wireless communication(CWC)by exploiting the randomness of sub-channel selection to confuse the warden.In particular,we propose two sub-channel selection transmission schemes,named random sub-channel selection(RSS)scheme and maximum sub-channel selection(MSS)scheme,to enhance communication covertness.For each proposed scheme,we first derive closed-form expressions of the transmission outage probability(TOP),the average effective rate,and the minimum average detection error probability(DEP).Then,the average effective covert rate(ECR)is maximized by jointly optimizing the transmit power at the transmitter and the number of sub-channels.Numerical results show that there is an optimal value of the number of sub-channels that maximizes the average ECR.We also find that to achieve the maximum average ECR,a larger number of subchannels are needed facing a stricter covertness constraint.

Single Photon Detection Technology in Underwater Wireless Optical Communication:Modulation Modes and Error Correction Coding Analysis

This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.

Photonics-assisted THz wireless communication enabled by wide-bandwidth packaged backilluminated modified uni-traveling-carrier photodiode

This paper presents a wide-bandwidth back-illuminated modified uni-traveling-carrier photodiode(MUTC-PD)packaged with standard WR-5 rectangular waveguide for high-speed wireless communications.With optimized epitaxy structure and coplanar waveguide electrodes,the fabricated 4-μm-diameter PD exhibits ultra-flat frequency response and high saturation power.Integrated passive circuits including low-loss bias-tee and E-plane probe are designed to package the PD into a compact module with waveguide output.The packaged PD module has demonstrated a flat frequency response with fluctuations within±2.75 d B over a broadband of 140–220 GHz and a high saturated output power of-7.8 d Bm(166μW)at 140 GHz.For wireless communication applications,the packaged PD is used to implement 1-m free space transmission at carrier frequencies of 150.5 and 210.5 GHz,with transmission rates of 75 and 90 Gbps,respectively.

Echo state network based symbol detection in chaotic baseband wireless communication

The Chaotic Baseband Wireless Communication System(CBWCS)is expected to eliminate the Inter-Symbol Interference(ISI)caused by multipath propagation by using the optimal decoding threshold that is the sum of the ISI caused by past decoded bits and the ISI caused by future transmitting bits.However,the current technique is only capable of removing partial effects of the ISI,because only past decoded bits are available for the suboptimal decoding threshold calculation.The unavailability of the future information needed for the optimal decoding threshold is an obstacle to further improve the Bit Error Rate(BER)performance.In contrast to the previous method using Echo State Network(ESN)to predict one future bit,the proposed method in this paper predicts the optimal decoding threshold directly using ESN.The proposed ESN-based threshold prediction method simplifies the symbol decoding operation by avoiding the iterative prediction of the output waveform points using ESN and accumulated error caused by the iterative operation.With this approach,the calculation complexity is reduced compared to the previous ESN-based approach.The proposed method achieves better BER performance compared to the previous method.The reason for this superior result is twofold.First,the proposed ESN is capable of using more future symbols information conveyed by the ESN input to obtain more accurate threshold rather than the previous method in which only one future symbol was available.Second,the proposed method here does not need to estimate the channel information using Least Squared(LS)method,which avoids the extra error caused by inaccurate channel information estimation.Simulation results and experiment based on a wireless open-access research platform under a practical wireless channel show the effectiveness and superiority of the proposed method.

Implementation of High-Q Embedded Band Pass Filter in Wireless Communication

At 12.8 MHz center frequency,the advanced miniaturized polymer-based planar high quality factor(Q)passive elements embedded bandpassfilter works in the L-band.Because most of the demands operate inside the spectrum,the wideband or high-speed operation necessary to enhance must be acquired in microwave frequency ranges.The channel has a quiet,high-performance micro-filter with wideband rejection.Capacitors and inductors are used in the high quality factor(Q)passive components,and related networks are incorporated in thefilter.Embedded layers are concatenated using Three-Dimensional Integrated Circuit(3D-IC)integration,parasitics are removed,and interconnection losses are negotiated using de-embedding methods.A wireless application-based Liquid Crystalline Polymer(LCP)viewpoint is employed as a substrate material in this work.The polymer processes,their properties,and the incorporated high-Q Band Pass Filter Framework.The suggestedfilter model is computed and manufactured utilizing the L-band frequency spectrum,decreasing total physical length by 31%while increasing bandwidth by 45%.

A Monolithic InGaP/GaAs HBT VCO for 5GHz Wireless Applications

A monolithic voltage controlled oscillator （VCO） based on negative resistance principle is presented uti-lizing commercially available InGaP/GaAs hetero-junction bipolar transistor （HBT） technology. This VCO is de-signed for 5GHz-band wireless applications. Except for bypass and decoupled capacitors,no external component is needed for real application. Its measured output frequency range is from 4.17 to 4.56GHz,which is very close to the simulation one. And the phase noise at an offset frequency of 1MHz is -112dBc/Hz. The VCO core dissipates 15.5mW from a 3.3V supply,and the output power ranges from 0 to 2dBm. To compare with other oscillators,the figure of merit is calculated,which is about -173.2dBc/Hz. Meanwhile, the principle and design method of nega-tive resistance oscillator are also discussed.

Sum-Rate Maximization in Active RIS-Assisted Multi-Antenna WPCN

In this paper,we propose an active reconfigurable intelligent surface(RIS)enabled hybrid relaying scheme for a multi-antenna wireless powered communication network(WPCN),where the active RIS is employed to assist both wireless energy transfer(WET)from the power station(PS)to energyconstrained users and wireless information transmission(WIT)from users to the receiving station(RS).For further performance enhancement,we propose to employ both transmit beamforming at the PS and receive beamforming at the RS.We formulate a sumrate maximization problem by jointly optimizing the RIS phase shifts and amplitude reflection coefficients for both the WET and the WIT,transmit and receive beamforming vectors,and network resource allocation.To solve this non-convex problem,we propose an efficient alternating optimization algorithm with the linear minimum mean squared error criterion,semidefinite relaxation(SDR)and successive convex approximation techniques.Specifically,the tightness of applying the SDR is proved.Simulation results demonstrate that our proposed scheme with 10 reflecting elements(REs)and 4 antennas can achieve 17.78%and 415.48%performance gains compared to the single-antenna scheme with 10 REs and passive RIS scheme with 100 REs,respectively.

Distribution algorithm of entangled particles for wireless quantum communication mesh networks

With ensured network connectivity in quantum channels, the issue of distributing entangled particles in wireless quantum communication mesh networks can be equivalently regarded as a problem of quantum backbone nodes selection in order to save cost and reduce complexity. A minimum spanning tree（ MST）-based quantum distribution algorithm（ QDMST） is presented to construct the mesh backbone network. First, the articulation points are found,and for each connected block uncovered by the articulation points, the general centers are solved. Then, both articulation points and general centers are classified as backbone nodes and an M ST is formed. The quantum path between every two neighbor nodes on the MST is calculated. The nodes on these paths are also classified as backbone nodes. Simulation results validate the advantages of QDMST in the average backbone nodes number and average quantum channel distance compared to the existing random selection algorithm under multiple network scenarios.

Deep Learning for Wireless Physical Layer: Opportunities and Challenges

Machine learning(ML) has been widely applied to the upper layers of wireless communication systems for various purposes, such as deployment of cognitive radio and communication network. However, its application to the physical layer is hampered by sophisticated channel environments and limited learning ability of conventional ML algorithms. Deep learning(DL) has been recently applied for many fields, such as computer vision and natural language processing, given its expressive capacity and convenient optimization capability. The potential application of DL to the physical layer has also been increasingly recognized because of the new features for future communications, such as complex scenarios with unknown channel models, high speed and accurate processing requirements; these features challenge conventional communication theories. This paper presents a comprehensive overview of the emerging studies on DL-based physical layer processing, including leveraging DL to redesign a module of the conventional communication system(for modulation recognition, channel decoding, and detection) and replace the communication system with a radically new architecture based on an autoencoder. These DL-based methods show promising performance improvements but have certain limitations, such as lack of solid analytical tools and use of architectures that are specifically designed for communication and implementation research, thereby motivating future research in this field.

5G High Mobility Wireless Communications: Challenges and Solutions

The fifth generation(5G) network is expected to support significantly large amount of mobile data traffic and huge number of wireless connections,to achieve better spectrum- and energy-efficiency,as well as quality of service(QoS) in terms of delay,reliability and security.Furthermore,the 5G network shall also incorporate high mobility requirements as an integral part,providing satisfactory service to users travelling at a speed up to 500 km/h.This paper provides a survey of potential high mobility wireless communication(HMWC) techniques for 5G network.After discussing the typical requirements and challenges of HMWC,key techniques to cope with the challenges are reviewed,including transmission techniques under the fast timevarying channels,network architecture with mobility support,and mobility management.Finally,future research directions on 5G high mobility communications are given.

Introduction to Wireless Endogenous Security and Safety:Problems, Attributes, Structures and Functions

The information security and functional safety are fundamental issues of wireless communications sytems.The endogenous security principle based on Dynamic Heterogeneous Redundancy provides a direction for the development of wireless communication security and safety technology.This paper introduces the concept of wireless endogenous security from the following four aspects.First,we sorts out the endogenous security problems faced by the current wireless communications system,and then analyzes the endogenous security and safety attributes of the wireless channel.After that,the endogenous security and safety structure of the wireless communications system is given,and finally the applications of the existing wireless communication endogenous security and safety functions are listed.

Developing MXenes from Wireless Communication to Electromagnetic Attenuation

There is an urgent global need for wireless communication utilizing materials that can provide simultaneous flexibility and high conductivity.Avoiding the harmful effects of electromagnetic(EM)radiation from wireless communication is a persistent research hot spot.Two-dimensional(2D)materials are the preferred choice as wireless communication and EM attenuation materials as they are lightweight with high aspect ratios and possess distinguished electronic properties.MXenes,as a novel family of 2D materials,have shown excellent properties in various fields,owing to their excellent electrical conductivity,mechanical stability,high flexibility,and ease of processability.To date,research on the utility of MXenes for wireless communication has been actively pursued.Moreover,MXenes have become the leading materials for EM attenuation.Herein,we systematically review the recent advances in MXene-based materials with different structural designs for wireless communication,electromagnetic interference(EMI)shielding,and EM wave absorption.The relationship governing the structural design and the effectiveness for wireless communication,EMI shielding,and EM wave absorption is clearly revealed.Furthermore,our review mainly focuses on future challenges and guidelines for designing MXene-based materials for industrial application and foundational research.

Distributed wireless quantum communication networks with partially entangled pairs

Wireless quantum communication networks transfer quantum state by teleportation. Existing research focuses on maximal entangled pairs. In this paper, we analyse the distributed wireless quantum communication networks with partially entangled pairs. A quantum routing scheme with multi-hop teleportation is proposed. With the proposed scheme, is not necessary for the quantum path to be consistent with the classical path. The quantum path and its associated classical path are established in a distributed way. Direct multi-hop teleportation is conducted on the selected path to transfer a quantum state from the source to the destination. Based on the feature of multi-hop teleportation using partially entangled pairs, if the node number of the quantum path is even, the destination node will add another teleportation at itself. We simulated the performance of distributed wireless quantum communication networks with a partially entangled state. The probability of transferring the quantum state successfully is statistically analyzed. Our work shows that multi-hop teleportation on distributed wireless quantum networks with partially entangled pairs is feasible.

Adaptive modulation in MIMO optical wireless communication systems

In the intensity modulation and direct detection （IM/DD） multiple-input multiple-output （MIMO） optical wireless communication systems, a direct-current-biased adaptive modulation scheme is proposed to guarantee the nonnegative property of transmitted signals, and the MIMO channel is converted to a parallel channel by using a singular value decomposition. Besides, a QR decomposition and successive interference cancellation based adaptive modulation scheme is proposed, and the MIMO channel can be simplified to a parallel channel under the bit error ratio （BER） target constraint. The power is optimally allocated to each sub-channel to maximize the data rate. Simulation results show that the proposed adaptive modulation schemes can effectively improve the transmission rate of the systems under the BER target and constant optical power constraints. The proposed adaptive modulation schemes make use of the multiplexing gain of the MIMO techniques, and can further improve the spectrum efficiency of optical wireless systems.

Channel Estimation and Throughput Evaluation for 5G Wireless Communication Systems in Various Scenarios on High Speed Railways

The fifth generation （5G） wireless communication is currently a hot research topic and wireless communication systems on high speed railways （HSR） are important applications of 5G technologies. Existing stud- ies about 5G wireless systems on high speed railways （HSR） often utilize ideal channel parameters and are usually based on simple scenarios. In this paper, we evaluate the down- link throughput of 5G HSR communication systems on three typical scenarios including urban, cutting and viaduct with three different channel estimators. The channel parameters of each scenario are generated with tapped delay line （TDL） models through ray-tracing sim- ulations, which can be considered as a good match to practical situations. The channel estimators including least square （LS）, linear minimum mean square error （LMMSE）, and our proposed historical information based ba- sis expansion model （HiBEM）. We analyze the performance of the HiBEM estimator in terms of mean square error （MSE） and evaluate the system throughputs with different channel estimates over each scenario. Simulation results are then provided to corroborate our proposed studies. It is shown that our HiBEM estimator outperforms other estimators and that the sys-tem throughput can reach the highest point in the viaduct scenario.

Design and Implementation of An Active Multibeam Antenna System with 64 RF Channels and 256 Antenna Elements for Massive MIMO Application in 5G Wireless Communications

This paper focuses on the design and implementation of an active multibeam antenna system for massive MIMO applications in 5G wireless communications.The highly integrated active multibeam antenna system is designed and implemented at 5.8 GHz with 64 RF Channels and 256 antenna elements.The 64-channel highly integrated active multibeam antenna system provides a verification platform for digital beamforming algorithm and massive MIMO channel estimation for next generation wireless communications.

Wireless communication and wireless power transfer system for implantable medical device

Traditional magnetically coupled resonant wireless power transfer technology uses fixed distances between coils for research,to prevent fluctuations in the receiving voltage,and lead to reduce transmission efficiency.This paper proposes a closed-loop control wireless communication wireless power transfer system with a wearable four-coil structure to stabilize the receiving voltage fluctuation caused by changes in the displacement between the coils.Test results show that the system can provide stable receiving voltage,no matter how the distance between the transmitting coil and the receiving coil is changed.When the transmission distance is 20 mm,the power transfer efficiency of the system can reach 18.5%under the open-loop state,and the stimulus parameters such as the stimulation period and pulse width can be adjusted in real time through the personal computer terminal.

Integrated Wireless Communication System Using MANET for Remote Pastoral Areas of Tibet

To reduce the network deployment cost and provide voice, message and low rate data services in remote pastoral areas of Tibet effectively, an integrated wireless communication system utilizing MANET(Mobile Ad hoc Network) is proposed. The sparse mobile devices, assisted with the solar-powered multi-functional standing stations mainly on networking maintenance and routing arrangement, self-organize into a MANET. The topology of the standing stations is designed for networking robust and to simplify the routing method and energy strategy. Then in the OMNe T++(Objective Modular Network Test bed in C++) simulation, the energy consumption is analysis while adjusting routing with the different energy status of the standing stations. The result shows that the standing stations should adjust routing as well as control the mobile devices' activity level according to the energy states of the standing stations and their adjacent mobile devices.

Strain-Insensitive Hierarchically Structured Stretchable Microstrip Antennas for Robust Wireless Communication

As the key component of wireless data transmission and powering,stretchable antennas play an indispensable role in flexible/stretchable electronics.However,they often suffer from frequency detuning upon mechanical deformations;thus,their applications are limited to wireless sensing with wireless transmission capabilities remaining elusive.Here,a hierarchically structured stretchable microstrip antenna with meshed patterns arranged in an arched shape showcases tunable resonance frequency upon deformations with improved overall stretchability.The almost unchanged resonance frequency during deformations enables robust on-body wireless communication and RF energy harvesting,whereas the rapid changing resonance frequency with deformations allows for wireless sensing.The proposed stretchable microstrip antenna was demonstrated to communicate wirelessly with a transmitter(input power of−3 dBm)efficiently(i.e.,the receiving power higher than−100 dBm over a distance of 100 m)on human bodies even upon 25%stretching.The flexibility in structural engineering combined with the coupled mechanical-electromagnetic simulations,provides a versatile engineering toolkit to design stretchable microstrip antennas and other potential wireless devices for stretchable electronics.

Eavesdropping Area for Evaluating the Security of Wireless Communications

Compared with wired communication,the wireless communication link is more vulnerable to be attacked or eavesdropped because of its broadcast nature.To prevent eavesdropping,many researches on transmission techniques or cryptographic methods are carried out.This paper proposes a new index parameter named as eavesdropping area,to evaluate the anti-eavesdropping performance of wireless system.Given the locations of legitimate transmitter and receiver,eavesdropping area index describes the total area of eavesdropping regions where messages can be wiretapped in the whole evaluating region.This paper gives detailed explanations about its concept and deduces mathematical formulas about performance curves based on region classification.Corresponding key system parameters are analyzed,including the characteristics of eavesdropping region,transmitted beam pattern,beam direction,receiver sensitivity,eavesdropping sensitivity,path loss exponent and so on.The proposed index can give an insight on the confirmation of high-risk eavesdropping region and formulating optimal transmitting scheme for the confidential communications to decrease the eavesdropping probability.